Drawings of a wooden crib with dimensions. How to make a crib yourself at home

A cradle is a small bed for newborns that can be rocked, moved, taken on the road, or placed right next to the parents’ bedside. This product must be durable and strong so that the child does not fall off with a poorly secured lounger during motion sickness.

In this article we will tell you how to make a cradle for newborns with your own hands in different ways. These are products made from waste material and wooden boards, ropes and thick fabric. There are options for weaving from wicker, and there are beautiful cradles made of wool rugs. The main condition for creating a crib is naturalness and environmental friendliness when choosing materials, so that the child does not inhale the “aromas” of synthetics or toxic varnishes and glues.

DIY cradles for newborns are made using natural wood or wool or cotton fabric. To fasten wooden parts, use only PVA glue (D3 or D4), and use only acrylic varnishes or paints for surfaces. They are completely odorless and non-toxic; they are widely used to cover children's toys and furniture.

Types of cribs for babies

Cribs, depending on their design, can be divided into several categories.

Classical

The most popular option is a simple rectangular model, mounted on legs or with wheels that ensure its mobility. It is intended, as a rule, for children from birth to three years. The bed can be equipped with drawers, removable side walls, and a lower bottom as the child grows older.

Transformer

Beds that can be adjusted depending on the situation will be a real solution in small apartments. When a child appears, in addition to the bed itself, he will need a changing table and a chest of drawers, where everything he needs is stored. In addition, it is convenient when it is possible to expand the structure as the baby grows. For example, a bed combined with a small changing chest can, after some time, be turned into a sleeping place for a teenage child. Round models with a diameter of 0.8 m are suitable for newborns. When the baby grows up, the transformer changes into an oval design. The absence of corners increases the safety of the piece of furniture for children.

Pendulum

Pendulum mechanisms installed in cribs help babies fall asleep faster. They can be longitudinal, transverse or universal. When choosing a model, you must carefully check the design for the absence of extraneous noise and jerking during operation. Pendulums must be equipped with clamps.

Cradle

If the financial capabilities of the family allow, cradles are installed for the newborn babies. Such designs are designed to provide maximum comfort to the newborn. Limited space creates conditions of complete security. A baby can sleep in a cradle until about six months of age, as it grows quite quickly. Cribs can be functional, equipped with various electronics and toys; simpler ones are intended only for motion sickness. Putting a baby to sleep in a bassinet is much easier than in a regular bed. In addition, many models have remote controls, making life easier for parents. An option for a cradle can be a cradle installed on a standard bed.

Manege

Beds with sidewalls made of mesh can be easily disassembled and transported if necessary. In such designs, which usually have bright colors, children not only sleep, but also play with pleasure.

Children's beds can be equipped with drawers, chests of drawers, and changing tables. To make it easier to move furniture around the apartment, rollers are installed, but you must not forget about the latches. Designs can have different shapes, be made in the form of a car, a house or a favorite cartoon character.

DIY children's bed: basic design requirements

A self-made crib for children must meet the following requirements:

this piece of furniture must be made exclusively from natural and environmentally friendly materials;
the bed must have a reliable, durable and stable structure;

The bed must be made of high-quality, natural and reliable materials

the product should not contain sharp corners or protrusions;
the surface of all components of the structure must be smooth, without chips or roughness;
it is necessary that the size of the bed corresponds to the height and physique of the child (with a margin of 25-30 cm in length);
the structure must contain fencing elements and other devices that prevent the possibility of falling;
a bed for a child should have high functionality, which is reflected in the presence of drawers, shelves and niches.

A do-it-yourself wooden children's bed has a number of advantages:

The size of the crib must match the height and build of the child

you can be confident in the quality of the materials that are used for its manufacture, since many store-bought products lack information about design parameters;
the bed design is created according to individual parameters, taking into account personal requirements and desires;
during the manufacture of a product, it is possible to check the design for strength and stability;
no large financial costs are required;
Furniture made with your own hands gives incomparable pleasure and aesthetic pleasure.

First, buy a mattress that matches the child’s parameters; the exact size of the bed will depend on this

Low wooden cradle

If the baby's dad has the skills to work with boards, then he can easily make a wooden cradle for a newborn baby with his own hands. Take high-quality boards - dry and clean, without gray spots of mold, so that the baby does not have an allergic reaction. To get wide and tall parts, the boards need to be glued together, making panels of the required size. This will protect them from cracking due to changes in temperature and humidity.

When the boards are ready, cutting is performed. The dimensions of the drawing must correspond to the height of the baby plus 20-30 cm for a pillow and freedom for the legs. The width of the bottom is also determined by placing the baby on a flat surface. It is better if the child can spread his arms to the sides freely.

The sides are cut out in a trapezoidal shape, rounding the parts at the top. The bottom of the bed is rectangular, as are the sides. For beauty, you can make beautiful curves. When the main part of the cradle for newborns is assembled with glue or screws, start working on the rounded legs. They have a flat surface on top, and the bottom part is made semicircular. The legs are made stable using a large radius. The crib should not completely rock, but slightly tilt in one direction and the other so that the baby does not fall out when tilting.

When you have made a cradle for newborns with your own hands, all that remains is to cover it with acrylic varnish. You can line the inside of the crib with fabric so that it stays on top; drill holes in the wooden parts for the laces.

DIY bed: dimensions, designs and diagrams, sketches and drawings

Today, children's beds are presented in a wide variety of species. They differ in the type of construction, dimensions, number of components, the presence of additional furniture accessories and material of manufacture. However, not every model can be done at home.

The most popular models that you can make yourself are classic do-it-yourself wooden beds. The photos clearly show product options with and without sides, loft beds and bunk structures. On specialized websites on the Internet you can find a variety of do-it-yourself drawings of children's beds and the dimensions of each individual structural element.

The classic single children's bed is the easiest to make. It carries a minimal functional load, since it can only be equipped with a drawer for linen. The design consists of a frame, headboard, footboard, base, sides and legs, which is clearly shown in the drawings of a children's bed. The size of the frame, for the manufacture of which a wooden beam is used, depends on the dimensions of the sleeping place, which is determined by the parameters of the mattress.

The base can be solid (from a sheet of chipboard) or lattice in the form of lamellas with ventilation holes. The second option is more preferable. The footboard and headboard are usually made of solid wood, plywood or chipboard. Designs can have a variety of shapes.

Important! The height of the headboard should be greater than the size of the footboard.

To enclose the berth, front and rear sidewalls in the form of a solid or lattice wall are used. The legs of the bed are made independently or purchased in the store. In the first case, they can be separately attached or are a continuation of the integral main structure.

A loft bed is considered more functional. The sleeping area is located upstairs. Under it you can organize a full-fledged storage system by placing a chest of drawers, a cabinet or a rack. Creating such a design requires skills and abilities in furniture production. For two children, you can make a two-tier structure, the creation of which also requires a certain amount of experience from the master.

Materials and tools

Master classes from experienced specialists contain useful tips on how to properly make a children's bed. Traditionally, the process begins with the selection of materials. Furniture must be safe and comfortable, so the most popular raw materials are:

natural wood;
metal;
plastic;
chipboard;
MDF.

Models made from natural wood are environmentally friendly and safe. They do not have a specific odor or toxic elements in their composition. MDF boards are similar in performance to natural wood. Chipboard is somewhat worse, since it contains formaldehyde-based resins. When properly processed, the slabs are safe and cost less than other materials.

A wooden bed is the best choice, but this option will be quite expensive. Very beautiful colored models of different shapes and shades are assembled from plastic, but this material is toxic. It is difficult to choose high-quality synthetic raw materials.

In addition to materials, the master will need:

special glue;
self-tapping screws;
drill;
roulette;
sandpaper;
accessories;
stain;
brush.

Requirements for homemade furniture

New furniture, especially a children's bed, should correspond to the age and height of the child. In addition, there are a number of requirements that must be observed when building a bed:

Cribs should be comfortable for a child of any age.
Reliability of fastenings.
For bunk models and loft beds, there must be a durable ladder (and the best option is to make a ladder with handrails).
All materials used in the work must be environmentally friendly and not emit harmful toxins during operation. Compositions for decorating surfaces must also be safe for humans.
After assembly, there should be no sharp edges protruding above the surface of nails, screws, or jagged edges.

All work on the construction of a children's bed with your own hands should be carried out strictly according to a pre-prepared drawing.

Step-by-step instructions for making your own baby beds

We present the sequence of basic steps when making a children's bed with your own hands, regardless of the design of the children's bed.

The drawing is the first stage of creating a children's bed with your own hands. The main size is the height of the child. The child is growing up quickly. Add 10-15 centimeters to the taken measurement.

Below are examples of designs for children's beds. Choose your favorite model as a basis. As you gain experience, you will be able to design furniture yourself and create exclusive samples of products.

Preparing parts

Apply the basic dimensions to the material. Use special markers that are sold in specialized stores;
number the parts to make assembly easier;
make a cut using an electric jigsaw or saw;
mark the location for the holes in the corners of the connection. Drill them using a drill;
polishing of all parts;
cover the parts with varnish or interior paint. It is recommended to choose water-based products. The second layer of varnish or paint is applied after the first layer has completely dried.

Frame assembly:

first of all, install the base of the structure, attach the lamellas to it;
strength is ensured by suitable hardware: corners, screws;
the backrests are attached to the finished structure;
fix the rails for the boxes. Additional supports are installed under the berth in the center;
The final stage is fastening the fittings.

DIY materials for a children's bed

Cribs for children are made of metal corners, polymer materials and wood. The most popular is the last option. Here are some reasons for the tree's popularity:

safe for the human body;
the product has a noble appearance;
wooden beds are always in trend;
fits into any interior;
simple processing process, simple tools;
the product does not require special care.

What you will need to create the design:

edged boards - from coniferous trees;
wooden blocks with a cross section of 50*50 or 50*100 mm;
slats of different sizes depending on the design;
plywood with a layer thickness of about 5 millimeters.

Important! Regardless of the model, choose durable wood. This will ensure safety, quality, and extension of the service life of the furniture.

After you have chosen a model and decided on the material for its manufacture, you need to clearly understand what requirements a self-made crib must meet:

convenience – the child’s rest should be complete. The baby’s behavior and emotions depend on the quality of night’s sleep;
safety – not only when the child is sleeping. Children often play games on the bed, such as jumping;
During the manufacturing process, remove all sharp corners from structural parts. You can wrap them in soft fabrics, rope, foam rubber. It will be like a decorative element;
Do not use materials impregnated with harmful substances. They can cause allergies and harm the child’s health;
think over a bed model that will serve your child for more than one year. Consider the fact that children grow quickly, their height and weight change;
structural strength - reliable fastenings; ill-conceived drawings can lead to an accident. This is especially true for models with two floors;
minor injuries - splinters, abrasions. Be careful when sanding the product. Use high-quality materials and tools for this;
models in the form of houses should be designed so as to prevent stagnation of air inside the structure. Beds are primarily intended for sleeping. Quality rest is possible with sufficient air exchange.

Tools

To make a full-fledged children's bed with your own hands, you do not need to buy expensive machines. Here is the basic set of tools for sawing and assembling the structure:

devices for measuring and marking;
electric saw;
clamp for fixing parts;
screwdriver or electric drill;
hand-held electric sander or sandpaper;
wood glue.

Children's bed with drawers

A comfortable bed model for a child who controls his actions during sleep and will not fall out of bed. If desired, the bed can be additionally equipped with removable sides. There are spacious drawers under the bed. The side openings are made for doors or curtains made of thick fabrics. You can leave them open, use them for large boxes with toys, or as a middle part, add drawers. Ask your child’s opinion and fulfill his wish.

Assembly sequence:

Canopy bed

The baby will undoubtedly like the bed. You can attach various fabrics to the structure, or hang garlands with toys. The model can easily be converted into a bed in the form of a house or tent. Below is a design drawing made in inches. The dimensions can be changed to fit the mattress you already have. To convert inches to centimeters, use the factor 2.54. The height of the canopy also depends on your preferences.

Cutting parts

Bed house

This type of bed will allow you to transition painlessly from a crib for the little ones and successfully use the furniture all the way to school. On the right is a photograph with a set of fixtures and tools that will be required during the manufacturing process of the structure. Sequencing:

determine the dimensions of the mattress and the height of the wall to the ceiling;
prepare bars for the frame - upper and lower crossbars;
make holes in them for fasteners - screws;
fix the corner brackets and brackets;
attach the crossbar parts. Connection angles must be 90°;
to give strength to the structure, use high-quality glue to connect the bars;
Sand the finished product and coat it with varnish intended for interior use. The safest paints and varnishes are water-based.

Hanging cradle

Use a cradle from an old stroller as a box, connect it with belts and hang it on a system of fasteners from the ceiling. If there is no cradle, we will make one from wood. To construct the fastener you will need:

In addition, prepare consumables (wood glue, dowels, corners, screws) and the necessary tools (jigsaw, drill, hammer drill, furniture stapler). Start by creating a drawing of the cradle, write down the size of each part. Cut out the necessary parts using a jigsaw from a plywood board. Start assembling the cradle structure from the bottom, glue the parts together with glue, and strengthen the connections with self-tapping screws. Attach the sides of the cradle. The structure is ready. Cover the inside of the cradle with foam rubber or padding polyester using a furniture stapler or glue. Cut out the future handles from the belt tape, measure the length of the handles from the ceiling to the required height of the cradle. Cover the ribbon with fabric prepared for decorating the cradle. Attach the handles to the bottom of the cradle with a furniture stapler. Use a hammer drill to make a hole in the ceiling, install fasteners from anchors, carabiners and angles. Secure the spring, inside which pass the safety cable. Hang the cradle on the spring. All that remains is to decorate it with fabric. The hanging cradle is ready!

Pros and cons of making children's furniture yourself

The younger the child, the more time he spends in bed. When buying a ready-made crib, you cannot say with complete confidence that it is completely safe for your baby. So what are the advantages of a homemade crib? Let's compare both options:

Crib from the store

Positive points:

There is no need to waste time on a finished bed.

Negative sides:

there is no confidence in the quality of the material;
reliability is in question;
the quality of the coating leaves much to be desired;
poor quality of bed manufacturing occurs;
you always have to pay extra.

DIY children's bed

Pros:

independent choice of material quality;
the design is reliable;
every detail is carefully processed;
paint coatings are selected correctly, in compliance with sanitary requirements;
minimal, justified costs for materials;
pleasure from the process;
acquisition of new skills.

Minuses:

time-consuming.

Sweet nest

The process of creating a nest for a cradle with your own hands can be followed using the example of a master class. For this we will need cotton fabric measuring 80*100 cm, you can take two pieces of one or more colors, openwork lace and satin ribbon about three meters, holofiber or padding polyester.

First, we make a pattern. It is perfect for kids. It can also be downloaded from the link below.

Then we baste two pieces of fabric and lace. The front side should face inward. We begin to stitch and overcast the fabric. You need to make very neat seams for beautiful edges. Next, turn the nest inside out and steam the edges.

Stepping back two cm from the edge, sew the seam. We'll need it a little later.

We cut out and round the edges a holofiber measuring 70*35 or use padding polyester. Now we fill the nest with it and make a couple of horizontal seams. Also, don’t forget to stitch the side of the cocoon.

Bed design options: choose the right one

There are a large number of modifications of sleeping places, but we will focus on the most popular:

with and without sides;
loft bed;
transformer.

Below we will look at the process of making a regular baby crib with legs with a headboard and footboard with our own hands. The option is without tricks, does not involve particularly complex work and will not take much time.

Also, having understood the principle of operation, you can, by analogy, make a crib for a newborn, baby or child over 3 years old.

Cradle made of slats

For those who like to make wooden structures, there is another option for an original baby crib. It consists of two semicircular planks, for which several boards were first glued together, and then they were cut out from the resulting shields according to a pattern. The next step will be to connect them to each other with a number of identical slats, screwed on with screws on both sides. The bottom of the crib is made flat.

For beauty, stars were cut out on the sides with a jigsaw. All slats must be thoroughly cleaned so that the crib is smooth and safe for the baby.

Making a bed with your own hands

Having firmly decided to build a structure yourself, you should understand all the nuances associated with its creation. Initially, a drawing is developed that displays all the component elements. Then they acquire the materials necessary for the work, prepare the tools, and if any of them are missing, they buy them in addition.

Based on the diagram, raw materials are divided into component parts. They are cut out, combined into a single structure, treated with special compounds, painted, varnished, and decorated. For clarity, we will consider in detail the main stages that the process of making a classic crib includes.

Drawings and diagram

The creation of any object is impossible without a drawing. In a graphic image made to a certain scale, the dimensions of the nodes are indicated. To compile it, you will need minimal drawing skills; you can also use special programs. When developing a project, you should consider:

Dimensions of the room where the product will be installed. The spacious room can accommodate a larger bed.
The dimensions of standard products for children under three years of age are 120x60 cm. If you plan to use the design in the future, preference should be given to larger models 150x60 cm, 180x70 cm.
At the bottom of the crib you can equip cabinets in which children's things will be stored.
For preschoolers, it is worth providing removable sides that will protect them from rolling and falling.
Design and decoration are chosen depending on the preferences of the parents.

Required tools and materials

To make and assemble the bed you will need the following materials:

board;
MDF sheet;
varnishes and paints;
screws, fasteners, rubber heels for legs.

Tools:

wood saw, jigsaw;
hammer, screwdriver, screwdriver;
drill, drill bit;
measuring instruments, a simple pencil.

Main parts and their preparation

A standard bed consists of 4 legs, 2 backs, sides, removable sides, frame, slats, mattress. The last element from the list is purchased ready-made, the rest are made by hand. The process looks like this:

In accordance with the drawing, markings of all components are applied to the tree. This can be done using a tape measure and a simple pencil.
The elements are cut using a jigsaw or saw.
The components are sanded with sandpaper.
Depending on the length of the sidewalls, metal corners are cut out with a grinder and used to install the mattress. Holes are drilled in them for self-tapping screws to secure them to the wood.
All components are painted and varnished.

Main assembly steps

Work on assembling the bed is carried out in the following sequence:

The backrests located at the head and foot are assembled. They are connected to the legs.
Prepare the base for the mattress. To do this, metal corners are attached to the wooden sides using self-tapping screws. The lamellas are fixed to them from above, perpendicular to the side walls.
The backs and base for the mattress are connected using furniture fittings; for reliability it is better to use corners.
A mattress is installed on the frame.
Removable protective sides are added to the sides, secured to special metal or wooden fittings.
If necessary, the finished product is decorated.

How to make a cradle from a child's bed for rocking a baby

From the resulting crib you can make a cradle for a newborn . To do this, you will need to modify the legs from the remnants of a chipboard sheet.

What will you need?

A cradle is a small bed for newborns and its exceptional feature is that the cradle is a hanging cradle, a crib that is suspended in the air. In the old days, it was the most common furniture for newborns and, by the way, the most dangerous, both before and now.

All this is due to the fact that if you do not follow the technology or make a mistake in the fastening, or in the material that allows the cradle to hang, then it and the child may simply fall, causing the child to be injured or even break. Before placing your baby in the cradle, check all parts for strength .

To make a cradle, no additional visit to the hardware store is required. All the necessary materials will remain from assembling the crib itself. The cradle will differ only in the runners attached to the legs of the crib.

Tools

To make runners you will need:

meter and ruler;
pencil for marking;
a piece of twine or rope, no more than 2 m;
large format paper for drawing the runner layout;
jigsaw;
screwdriver

Materials

The remains of a chipboard sheet, as well as 4 metal corners 50 by 50 mm and self-tapping screws for fastening, are suitable as a basis for the runners.

As a consumable, you will need a large sheet of paper on which to draw a pattern for the runners.

Step-by-step instructions for designing and installing runners

Before you begin installing the runners, it is worth considering their design . They are made from leftover chipboard. To fasten the runners to the legs of the crib, 4 metal corners are used, as well as self-tapping screws from 2 to 3 cm.

Sizing

One of the most important points is determining the size of the runners. The main thing here is not to make mistakes in sizes and proportions.

Otherwise, the cradle may tip over or not rock at all. To do this, it is important to calculate the radius along which the runners will be cut, as well as their lowest point relative to the legs of the crib. For this project, the lower point of contact of the runners with the floor relative to the beginning of the legs is 5 cm.

Drawing

For convenience, the drawing should be drawn on large format paper . The following parameters must be taken into account:

The base of the triangle is the distance from the outer edge of one leg to the outer edge of the opposite leg.
Its top is the lowest point of the runners, located 5 cm below the level of the legs.

After the figure is drawn, you can start drawing the runners:

To do this, you need to take a pencil and tie a piece of rope to it. It will look like a compass.
After this, measure out such a radius that the pencil passes through the corner of the base and its top. This will be the required value.
The length of the rope is fixed and the lower edge of the runners is drawn.
After this, step back 20 cm and make another top edge.
Measure the length of the arcs. Usually it is within 25 cm “outside” the legs.
The paper blank is drawn and cut out again.

An example diagram can be seen below:

Manufacturing of parts

The runners consist of two parts, which are cut out on a paper pattern using a jigsaw.

For beauty, you can make several holes in them using a drill or screwdriver.

Do not drill too many holes , this will affect the overall rigidity of the structure.

Attaching the skids

These elements are installed symmetrically to each other, on opposite sides of the crib. They are attached using metal corners to the legs on the inside of the crib. In this case, the lower arc of the runners should overlap the vertical posts so that the lower corner of each of them is flush with it. Also, for reliability, you can fasten the runners and crib posts from the outside. To do this, you need to carefully drill the runners through the legs and secure them with 72 mm self-tapping screws.

Homemade bed-car

Few boys will refuse a car bed. And you don’t have to go to the store to please your child. Using plywood or MDF sheets, water-based paints and varnish, an ordinary sleeping place turns into a dream come true: a do-it-yourself children's bed in the shape of a Batmobile (or any other car) can be realized in a week of leisurely work in the evenings.

First, find an image of the car that suits you, find a program with the ability to visualize pictures. Having transferred the image, it can be divided into squares with a side of 100 mm - so that later it is easier to convert it to real scale. It’s most convenient if the entire part fits into a sheet of plywood or MDF you bought, it’s even better if you can make two side panels from one sheet... In general, select the dimensions, change the shape. Once you are satisfied with the result, you can transfer the design to the sheet.

It all starts with drawing the sheet into squares with a side of 100 mm.

Referring to the existing sheet, transfer all the lines from the paper to the plywood. At first the lines are thin, after you have more or less drawn everything, you can outline the resulting contours with a thick line - it will be easier to cut out. Although the details are needed in duplicate, there is no point in drawing the second one: having cut out the first one, we will outline it and get the second one.

This project also has overhead parts - we draw them separately. When everything is ready, take a jigsaw and cut along the contours.

Cocoon cradle for newborns

It’s easy to sew a comfortable portable cradle with your own hands, which is popularly called a cocoon, since it seems to hug the baby from all sides. You can take it with you on the road, on vacation in nature, or put it on the bed next to your mother.

Despite all the apparent complexity, sewing such a cradle is not at all difficult. You will need thick cotton fabric of one or two colors, a zipper, tape for tightening the corners of the cocoon, padding polyester, foam rubber and batting. If you have a sewing machine and very basic sewing skills, then feel free to start sewing such a cocoon, you will definitely succeed.

Decor ideas

To make a children's bed from wood with your own hands, you need to be guided by the accompanying drawings and dimensions. Since the size of the mattress is fundamental, you need to independently calculate the dimensions of the parts.

Based on Harry Potter

Making such a bed is not much more difficult than a regular one, but the joy of a child who dreams of touching the magical world of Harry Potter will be endless.

The main decorative elements are:

number 5979 (the numbers can be easily cut out of wood, painted silver and glued to the footboard, or use metal badges for this purpose, which are sold in a hardware store to indicate apartment numbers);
an inscription symbolizing the Hogwarts school of wizards (the easiest way to do it yourself is by printing it on a color printer, gluing it onto a piece of veneer cut to size and covering it with several layers of varnish).

The space under the bed can be left empty, but it is much more effective to fill it with drawers. An excellent option would be to equip an extra bed there, which will come in handy if one of the young wizard’s friends comes to visit.

The original dimensions of the bed and color combination are shown in the figure.

With canopy

This bed will be more to the taste of girls. According to the design concept, the canopy is made in the form of side curtains, and the top of the bed remains open, but if desired, you can improve the design (for example, tighten the top part with fabric).

Since curtains need to be washed regularly, the fastening should allow them to be removed and hung back without difficulty.

If for some reason the presence of a canopy is undesirable, the same bed can be made without it. To do this, it is enough to shorten the slats on which it rests, so that the legs end flush with the sides.

Cozy house

A real lifesaver for parents whose children have trouble falling asleep. The design of this bed creates a calm and at the same time fairy-tale atmosphere, and high sides in the form of walls and a roof help the child feel protected.

The effect of the night sky can be created on a tree in several ways:

paint with acrylic paints, which have a beautiful glossy texture, are durable, and do not have a strong odor;
purchase wallpaper or self-adhesive film with a similar design;
cover the board with a fabric of the appropriate color (in this case you will have to regularly vacuum the inside of the bed).

Instead of drawers under the bed, you can equip a pull-out sleeping area for guests.

Two-tier with ladder-chest of drawers

If there are two children in a family, and the area of the apartment does not allow for a separate bed for each, you should pay attention to this option. True, unlike simple designs, creating a bunk bed will require more time, skill and effort.

Under-bed drawers and a chest of drawers will optimize space and provide additional storage space. If desired, the steps can be made ordinary.

When working on such a bed, you need to take care of the safety of the child who will sleep on the lower tier. All fastenings of the “top floor” must be reinforced with metal corners.

Macrame cradle

Many women are fond of weaving cords, so it is not surprising that the cradle for a newborn baby was made using the macrame technique. For this work you will need natural, durable cotton rope. The main threads are attached to selected hoops made of wire.

The bottom of the bed is best cut from plywood. Since the child is quite light, you can take the thinnest plywood - 4 mm. First of all, the cords on the upper hoop are fixed with knots. Next, the selected pattern of knots is made around the circumference using a working rope.

When the required height of the crib is reached, attach the lower hoop and weave a tightly mesh for the bottom. When the product is ready, insert the cut piece of plywood. Be sure to clean the edges with sandpaper; it is best to cover it with acrylic paint. Lastly, work on the bottom decorative fringe and make strong ropes to attach the crib to a hook on the ceiling.

Possible mistakes

Anyone who has not previously encountered furniture making may make a number of mistakes. Here are the most common ones:

Using fresh wood. Since over time the material will dry out, become denser and, accordingly, decrease in size, the structure will simply fall apart. For a bed, you should only purchase boards that have been left in a dry, ventilated area for two or three years or have been machine dried.
Neglecting to polish parts. All parts of children's furniture must be properly processed to avoid injury. Since a child can stick his hand even into narrow cracks or crawl completely under the bed, even those that are inside the structure should be sanded.
Connecting parts using screws. This assembly option is good anywhere, but not in children's furniture. Under the influence of constant loads, the thread will destroy the structure of the wood fibers, and over time the structure will become loose. To assemble the parts, you should use special tenon joints, which are shown in the figure below, and be sure to glue them with wood glue. To strengthen areas that are subject to the greatest loads, metal ties are used.

Photo of a children's bed with your own hands

Sources

https://mebel-expert.info/detskaya-krovat-iz-dereva-svoimi-rukami/
https://remoo.ru/mebel/detskaya-krovat-svoimi-rukami
https://mebel-sovet.ru/krovati/dlya-rebenka/975-detskaya-svoimi-rukami
https://svoimirykami.guru/detskaya-krovat-svoimi-rukami/
https://remoskop.ru/detskaya-krovat-svoimi-rukami.html
https://dom-i-remont.info/posts/mebel/detskaya-krovat-svoimi-rukami-chertezhi-vidyi-i-materialyi/
https://remont-spalni.ru/detskaya-spalnya/kak-sdelat-detskuyu-krovat-svoimi-rukami.html
https://roomester.ru/interer/detskaya/detskaya-krovatka-svoimi-rukami.html
https://kak-sdelano.ru/detskaya-komnata/detskaya-krovat-svoimi-rukami-foto-idei-i-chertezhi
https://kakpostroit.su/detskaya-krovat-iz-dereva-svoimi-rukami/
https://novamett.ru/krovat/dlya-novorozhdennogo