DIY pendulum mechanism for a baby crib

I finally had to develop drawings for the pendulum crib, which I hasten to share.

To make a pendulum mechanism you will need: 8 bearings with an outer diameter of 3.5 cm (in any case, I use exactly these because they fit perfectly with a Forster drill for furniture hinges, but you can take a smaller diameter); 8 metal bushings with 6 threads (used for fastening furniture corners, can be found in any furniture hardware store) Also needs to be turned to order; 8 metal bushings that are tightly pressed into the inner holes of the bearings; 8 countersunk screws for fastening the pendulum mechanism; 4 strips for the pendulum mechanism (I used planks from oak parquet); 8 washers are better than plastic ones (to prevent the crib legs from rubbing against the support structure). In addition, you need to make a box under the crib, or just a frame on which the crib will be “suspended.” At prices (approximately) bearing 1 pc. — 40 rub. bushings for furniture corners - from 5 to 10 rubles. Internal bushings (to order) about 50 rubles. each, and then agree on how much. Although. the problem can be solved more simply. Simply hang the crib on the support box using clotheslines. But in this case, you risk that the ropes may fray, and the crib itself will have play when it oscillates, and its legs will constantly touch the supports.

All dimensions of parts are given according to internal parameters, based on standard mattress sizes

Other works by Alexey (papa_Karlo) :

Even before the most important event happens in the family - the birth of an endlessly beloved and dear baby, the first concern of parents is arranging the children's room. Already at this stage, the main task of future mothers and fathers is to purchase a cozy and high-quality crib. The modern market for children's goods offers many options for organizing a sleeping place for newborns; a children's bed with a pendulum is in considerable demand among parents.

Crib with a pendulum swing mechanism - advantages and features

At first glance, a pendulum bed is very similar to a traditional crib; the key difference is the presence of a special device that creates oscillatory movements. The legs of the crib remain motionless, only the berth rocks, maintaining a horizontal position.

The pendulum mechanism imitates motion sickness in mother's arms, the baby quickly calms down and falls asleep. Thus, a bed with a pendulum mechanism simultaneously functions as a berth and a cradle.

A crib with a pendulum mechanism is characterized by a long service life and can be used as a sleeping place from the very birth of the child until he reaches 3-5 years of age.

The positive qualities of pendulum beds also include:

smooth ride;
silent operation of the pendulum;
presence of a movement blocker.

Parents can fully appreciate the benefits of the pendulum system at night. To calm a cranky baby, a mother does not need to jump to her feet at night; it is enough to simply touch the crib located next to the parents with her hand, thereby starting the pendulum.

Tips for the master

The description of how to assemble a pendulum crib, instructions and photos may vary depending on the model of purchase. Carefully read the manufacturer's instructions included in the package.
It is better to assemble the crib in the bedroom or nursery and not move it to other parts of the apartment.
Keep the crib clean: remove dust and dirt regularly using water and a mild hypoallergenic detergent, laundry soap is suitable.
If you find parts missing, consider ordering additional parts from the furniture manufacturer's website.
It is better to assemble the crib the day before the baby arrives at home. Make sure that everything is ready for the arrival of the little man.

It is necessary to choose the right mattress for a crib

You need to choose a place for a baby cot

The crib must match the interior of the nursery

A pendulum crib, carefully assembled for the long-awaited baby with your own hands, tested for safety and reliability, will be an excellent place for your baby to relax and develop. In a nursery or bedroom it will become the center of attraction for parents and guests. In order for the crib to be a cozy nest and interior decoration, it is not necessary to call a professional furniture assembler. Thanks to the description of how to assemble a pendulum crib (instructions, photos), you yourself can easily achieve your intended goal.

Baby cot-cradle with pendulum mechanism of transverse swing

Wooden crib with pendulum mechanism

Design and types of pendulum mechanisms for cribs

The structural elements of the pendulum are bushings, hinges, and a pendulum bar. There are models of cribs on the market with three types of pendulum mechanisms:

The mechanisms differ in the swing trajectory. The longitudinal system creates oscillations of the bed from the head to the legs (back and forth), the transverse pendulum swings the crib in the right-left direction, the universal pendulum mechanism can make both longitudinal and transverse movements. Depending on the model, the vibration amplitude of the sleeping place ranges from 5 to 15 cm.

According to doctors, the best choice is a pendulum bed for newborns with longitudinal swing; vibrations in the back and forth direction are closest to human physiology. Oscillations along the body maintain normal intracranial pressure in the baby.

According to the method of swing, manual and automatic pendulum beds are distinguished.

A pendulum bed with a manual mechanism is activated by pushing the human hand. The oscillations of the sleeping place continue for about 10 minutes.

In electric models, a drive unit is used along with the pendulum mechanism to create oscillatory movements. The drive mechanism is a miniature electric motor equipped with electronics. The power source for the electric drive is the electrical network. The drive unit is mounted on the stationary part of the crib.

The pendulum mechanism can be controlled remotely using a remote control. In some models, a microphone is built into the drive unit; the bed with automatic electronic rocking is activated when the baby cries. After receiving a voice command, the electric drive starts the pendulum. The rocking cycle lasts for 10-15 minutes and the sleeping time stops automatically after the specified time has elapsed; if necessary, the movement of the crib can be stopped manually.

Which one to buy: types of bedroom furniture for babies

Girls, does anyone know how to fix a pendulum crib? The baby is already a year old and cannot sleep in his crib.

If necessary, the rocking chair can be in a stationary position; for this purpose, special clamps located at the bottom of the side panels are used.

The model includes a frame, bed, legs, backrests, and a pendulum mechanism. Many products are complemented by drawers, changing pads, and chests of drawers for storing things. In what sequence to assemble a children's bed with a pendulum according to the instructions:

The back part is connected to the side strips using screws.
The berth is first mounted on screws, then on guides located on the sides.
The structure is turned over to install the pendulum mechanism.
Linen boxes are inserted, the side wall of the pendulum is fixed with screws.
All plugs are closed.

And I bought my crib completely unexpectedly for myself - I ran into the store 5 minutes before closing just to “feel” the material, and in the end I paid for it on the same day, and was also very pleased with it. You could store the crib with them even until the birth of the child, and delivery was carried out within 3 days after the call.

An additional function of the crib is a pendulum mechanism. It allows you to simplify the process of rocking your baby. But it should be remembered that the pendulum should be used only in the first months.

But here, it seems, the mattress is placed on boards, as they are called, chipboard, and for protection there is just such a small fence. There's a fence inside. Or is it just for the mattress?

Beech is the most durable and wear-resistant type of wood; 87% of Italian furniture is made from it. And the Italians boast of their approach to the selection of quality materials for the manufacture of furniture. Therefore, a transforming bed made of solid beech is a very reliable and environmentally friendly design

Separately, you should pay attention to the paintwork of the transforming crib

Let's start assembly. The timber was connected to the dowel using a countersunk screw and wood glue. Probably it was possible to do without screws, but I wanted it that way. All holes were filled with putty.

General rules for choosing cribs

For many mothers and fathers, the decisive factor when buying children's furniture is visual appeal, however, this approach is fundamentally wrong. The main selection criteria are the convenience and safety of the little man. There are many things to consider when choosing a crib, including:

material of manufacture;
baby protection elements;
features of the sleeping place arrangement.

Shapes, materials and sizes of frames

One of the main structural elements of a crib is the frame. Today, furniture manufacturers offer a huge selection of cribs for newborns; the range includes traditional rectangular models and somewhat non-standard products with a round or oval frame.

The strength and durability of a crib directly depends on the material used. In the production of furniture for small children, natural wood, MDF, plastic, laminated chipboard, and metal are used.

Of course, for a baby it is better to choose a crib made of natural material. Furniture with a wooden frame looks expensive and presentable, is characterized by a long service life and the ability to “breathe”. In the segment of wooden children's furniture today you can find quite affordable models; budget options include products made from pine, spruce and birch. More durable, expensive cribs are made from hard trees - beech, ash, oak. Wooden cribs vary in style and design. The market offers classic models made from unpainted wood and wooden cribs coated with paint and varnish, decorated with printed images.

Plastic frames are easy to maintain; the weight of a plastic crib is much less than its wooden counterpart. The affordable cost of plastic furniture also attracts buyers.

Before buying a crib for a baby, do not hesitate to ask the seller for quality certificates for materials. Unscrupulous manufacturers may use low-quality materials that are harmful to children in order to reduce the cost of furniture. To cover the structural elements of the children's bed, non-toxic, safe, water-based paints should be used.

Metal frames are famous for their strength and long service life. However, metal cribs are not widely used due to the “coldness” of the material.

The standard dimensions of a domestically produced baby crib are 120x60 cm. In imported products, the width and length of the sleeping bed are increased by 5 centimeters and amount to 125x65 cm.

Sides - types and rules of choice

Another important element is the sides of the crib; the main purpose of the design is to protect the baby from falling. The sides can be:

stationary and removable;
blind rack or combined (two solid sidewalls, two rack).

Most often, furniture manufacturers make the side walls of the sleeping bed in the form of a lattice structure; the side walls consist of a frame and cross bars installed at a certain distance. The crossbars can be made in the form of a round rod or be represented by wide slats.

When choosing a sleeping place for a baby, it is important to take into account two main requirements for enclosing structures:

the distance between the vertical slats of the side parts should not exceed 5-6 cm;
The height of the sides should be at least 60-65 cm, measurements are taken from the mattress to the edge of the side.

Additional protection for the baby will be provided by special silicone pads on the edges of the side and soft removable sides fixed around the perimeter of the crib. Elements of protection are especially relevant when the baby begins to actively move and during the period of teething. Silicone pads will not only protect the child’s gums from damage, but also maintain the integrity of the tree.

Some models of cribs are equipped with a front folding side. The folding sidewall allows you to move the child's bed close to the parent's bed; when the child grows up, he will be able to independently climb into his sleeping place. Unlike cribs equipped with runners to adjust the height of the side, folding designs use piano hinges. If necessary, the side can be folded down to the outer side and, when raised, is secured with latches.

Sleeping place - types and arrangement of bases

The base for the mattress of a baby crib can have a solid covered or slatted bottom. A solid bottom is considered more durable, and the cost of cribs with a solid base is lower than their slatted counterparts. A significant drawback lies in the design features; the solid base does not have gaps or holes, and therefore there is no air circulation between the mattress and the bottom. The mattress does not dry well and can quickly become unusable.

The slatted bottom consists of transverse strips fixed to the frame. The lattice design does not retain moisture inside the mattress and provides intense air circulation. The slatted base helps to properly distribute the load on the baby’s fragile spine.

What you will need

A children's bed is not the most complex product, so it can be made even without experience working with furniture. The stores have a large selection of blanks from which it is easy to assemble good furniture.

Selection of construction material

Children's beds are made of wood. This is a durable and safe option. At the initial stage, a mattress is selected, and then raw materials. The sleeping place has a standard size of 1200x600 mm if the bed is for a baby, and 1800x800 mm if for a teenager.

Popular types of furniture:

The simplest is a standard single bed. For beginners, a molding option in the form of a machine is also suitable. During production, you will need figured side walls (in the form of a car, carriage, crown, etc.).

Solid wood

The cost of the finished product depends on the cost of the tree. The most expensive are oak and ash. But beds made from them are also durable. Pine is usually used. It has bactericidal properties, improves the health of indoor air and remains in good condition for a long time.

The array can be in the form:

You need to choose the material carefully. Timber and boards in a hardware store should be stored in stacks raised above the ground. Otherwise, the tree rots. It is not suitable for a bed, as it is not safe and can cause allergies.

Dimensions:

beam: 5x5 cm;
boards: 2x10 cm;
plywood sheets - according to the internal size of the frame.

It is worth choosing already processed raw materials, with a minimum number of knots and irregularities (planed and trimmed). Otherwise, you will have to spend additional time cleaning the parts. Wood is used for the interior parts of the bed.

Plywood

The work uses sheets and dies. The dies are attached directly to the base, and sheets are placed on top of them.

To avoid sagging of the mattress and make your rest more comfortable, you need to secure items to the slats. They are attached to the base with screws. Since sheets are not the most resistant material, it is better to use it for a single-tier bed or only in the lower part of a bunk bed.

Chipboard is not used for a children's bed, as it is not elastic and can create discomfort. Plywood is lighter and more comfortable.

Professionals recommend using MDF when working on a crib. This material cannot be laminated, which means it can be glued with regular PVA. This proposal is the most environmentally friendly and safe for the child. MDF is purchased from a furniture shop. It's cheaper than buying in a store with a markup. In addition, workers will immediately cut the raw materials into parts.

Tools and additional materials

In addition to the basic building elements, you will need:

grinding machine;
milling machine or slotting machine;
dull spines;
self-tapping screws;
brushes and rollers;
screwdriver;
drill;
level and roulette.

Be sure to purchase: wood glue, putty mixture, steel or plastic corners, decorative parts.

Additional equipment for children's beds with a pendulum

Today, multifunctional furniture is valued, which allows you to optimize space as much as possible. Modern cribs for newborns can be combined with storage systems, a changing table, etc. Storage systems are represented by drawers and cupboards located at the bottom of the crib or on the sides of the bed.

Features of manufacturing different models of beds

Bed models differ in manufacturing technology. Babies need secure sleeping places that are closed and safe. Modern types of products, without excessive decoration, are suitable for teenagers. But any bed should be comfortable.

Children's beds for different age groups

Children's models are divided by age:

for babies;
for children of preschool and primary school age;
teenage.

Cribs for newborns are manufactured according to the strict requirements of Sanpin. It is difficult to make this type of furniture yourself, but if you have the skills to work with the tool, you can try. The drawings are freely available. The crib is equipped with a pendulum or wheels.

For older children, open-shaped furniture is made. The mattress must be larger than 1200x600 mm.

Recommendations for creating a bed for children 3-10 years old:

first purchase a mattress and only then make a bed frame;
a transformer is a more suitable form, since the furniture “grows” with the child;
for work it is worth choosing the most durable and safe materials, since children of this age are very active;
the sleeping place is made rigid, since children’s spine is developing, but at the same time elastic enough to make it comfortable to sleep.

Teenage furniture should match the size of the child. You can make a bed according to the standards of an adult. For teenagers, a side bar covered with soft fabric is installed on the wall side.

Bed-sofa

Sleeping sofas have complex folding mechanisms. You can buy them and produce the rest of the components yourself. In addition to wood, you will need a hypoallergenic filler - holofiber, padding polyester and good fabric for covering the finished product.

Bed with storage drawers

Comfortable furniture that saves space. Drawers can be mounted on the side of the bed or under the bed. Additional boards and retractable mechanisms will be required for work. Boxes should not touch the floor. You will also have to purchase accessories.

Unusual children's bed

A bed with a slide is a child's dream. The model is simple, but more expensive in terms of costs: you need to purchase a ready-made slide. The staircase to the berth can be standard or in the form of drawers. Such interesting options are popular today, so finding a diagram will not be a problem.

Production recommendations:

you can choose ready-made, colored facades;
a slide is purchased from plastic, with special fastenings to the bed;
child age 2-7 years.

A homemade children's bed is cheaper than a ready-made one. For the work you will need natural wood materials (timber, boards) and tools. Types of bedroom furniture differ in production technologies, and the single-bed option is the simplest. The decor will easily fit the product into the overall decor of the children's room.

Source

How to assemble a bed with a pendulum with your own hands - step-by-step instructions

You can assemble a bed with a pendulum yourself. At the first stage of work, you should prepare the necessary equipment, unpack the crib, carefully read the assembly instructions, and check the presence of all structural elements and fasteners.

It is better to assemble the crib at the place of its use.

Work equipment includes the following tools:

Here are the main steps

Prepare your work area. Usually it is covered with a light material, on which even the smallest details such as screws will be easily visible (this is done so as not to lose anything); Assemble the frame. To do this, first connect the back guide and two side walls together, and then the front

Don't confuse where is up and where is down! Important: if the front wall is assumed to be movable, it should be installed after the base has been installed; According to the attached instructions for assembling the crib, install the bottom (usually it consists of a lattice base and a plywood sheet); If the model has wheels, now is the time to turn it upside down and install the wheels in special grooves or simply screw them on; Now you can assemble and install the pendulum mechanism on those cribs that have it; Basically, everything is ready. All that remains is to check the reliability of the assembly, the operation of the mechanisms and equip a cozy and safe sleeping place for the baby

To do this, we invite you to visit the Sleep Therapy website, where you will find a wide range of different mattresses and bedding. Comfortable, modern, high quality!

Remember that assembling a crib is always based on the instructions. Follow the sequence of actions, carefully monitor the fastening of parts - and then everything will definitely work out! There is no rush to complete this task. A correct, thoughtful and unhurried approach is the key to its successful solution.

The crib assembly diagram is the fundamental document when purchasing this piece of furniture. Let's figure out how to read it correctly so as not to make a mistake in the end.

Here is one example of such a scheme that we will work on:

Here we show how to assemble the most common model of a bed for a baby: with a mechanical pendulum system (the wheels are removed and the swing is carried out by means of semi-arcs located at the bottom of the side walls), wheels and a removable front part. The first picture shows how to install the half-arches. On the second - fastening the side and rear walls. The third image explains how the bottom is installed, in the fourth we see the attachment of the front part. Figures 5 and 6 are more specific and show how to properly attach the bottom and make the box.

In fact, reading the diagram is perhaps the most difficult task in the entire assembly process

It is important to understand each stage and understand what conventional images convey. That is why we recommend that you carefully read not only the schematic images, but also the accompanying text.

Photos of children's beds for newborns with a pendulum mechanism

Video

Sleep is an important part of an infant's life, so it is very important to provide a comfortable environment for your newborn to fall asleep. A bed with a rocking system for babies imitates the tenderness of a mother’s hands; smooth rocking of the sleeping place in one plane will ensure a calm and sweet sleep for the baby.

Details about do-it-yourself pendulum beds
How to make a pendulum for a crib with your own hands?
Procedure and necessary tools for making a crib yourself
Completion of the installation process

So, congratulations to your family! All members are in joyful anticipation of a miracle. But, despite the anticipation of the holiday, someone close to you should take care of preparing a comfortable sleeping place for the newborn. Grandmothers can buy or sew bedding sets, grandfathers, uncles and aunts can give toys and clothes, but, of course, the future dad should make a crib for the baby!

Diagram of a baby crib with dimensions.

This process will be both pleasant and useful, and will also help save financial resources for a young family. Convenience, environmental friendliness and safety - these are the advantages of a do-it-yourself crib. The pendulum in her device will add functionality and comfort.

Tips for the master

You should know that each crib may vary in assembly. It all depends on the model purchased. This means that it is necessary to read the instructions and look at the diagrams.
Assemble furniture exactly in the room where it will be located.
After the assembly process has been completed, take care of cleanliness. There should be no dust or dirt, otherwise it will negatively affect the health of the little user.
It also happens that some details are missing. Simple practice. In this case, contact the supplier or store.
Particularly famous models are Carolina and Kubanochka. They are distinguished by their reliability and practicality in use. They are also very easy to assemble.

Details about do-it-yourself pendulum beds

Many people consider a device such as a pendulum unnecessary for a children's bed. And some parents, on the contrary, only want to purchase or make a rocking crib with their own hands. Opinions are generally divided on this issue. Which one you choose can be decided by familiarizing yourself with all the nuances of using such a device as a pendulum.

Scheme of the pendulum mechanism.

Some modern mothers are of the opinion that rocking a child is an unnecessary and useless process. But the other half of parents think in a completely opposite direction and believe that it is impossible to do without it. But the choice is yours;
It is wrong to assume that you will only have to rock a baby for the first few months of life. This may be true, but some children require rocking them before bed and at an older age. For example, your baby is already a year old, he weighs about 10 kg and does not fall asleep until you rock him. It's a bit heavy! At these moments, having a crib with a pendulum will save you. Making such a bed with your own hands will not be difficult, and if you wish, you can also purchase a swinging bed option in the store.

Today you can choose the design of the pendulum mechanism from two options. This is a transverse and longitudinal view of the pendulum. If you choose a longitudinal mechanism, the crib will move forward and backward. And if you like the transverse view, then you can rock the bed from right to left and back.

The main thing is to correctly calculate the free space in the room so that the motion sickness process is not interfered with by interior items and walls. A minimum of 10 cm of free space will be enough to install a crib with a pendulum.

Return to contents

Characteristics of the material. All the pros and cons

aspen;
cedar;
Linden;
coniferous species.

Also recently, plastic lining has gained particular popularity. It imitates wood, but is cheaper. Some people look at such a “surrogate” with a fair amount of disdain, but as sales of finishing materials show, they are a small minority. Let's take a look at its main trump cards:

simple processing;
long-term preservation of operational properties;
camouflage of utility lines;
high sound insulation performance;
visual appeal.

What can you say about the disadvantages? Every material has them, and lining in this sense cannot be an exception.

sensitivity to moisture and temperature changes;
the possibility of drying out and cracking under the influence of specific temperature conditions;
the potential for fungus to appear (how to get rid of fungus on walls);
flammability:
presence of harmful substances (for plastic lining)

steel;
aluminum.

Such material will definitely not rot or deform, and will not release life-threatening substances. However, it tends to heat up, so you should avoid placing it in areas exposed to the sun, as well as near light sources and water pipes (read about how to hide pipes without installing them in the wall).

How to make a pendulum for a crib with your own hands?

Let's figure out how to make a pendulum for a crib with your own hands. For these purposes you will need:

Installation diagram of the pendulum mechanism.

bearings, the outer diametrical size of which corresponds to 3.5 cm. The required quantity is 8 pieces;
metal bushings with 6 threads. You will also need 8 of them. You can buy these at any market that specializes in selling furniture fittings;
countersunk head screws. With their help the pendulum will be attached. Need 8 pieces;
strips - 4 pieces. Elements of parquet made of oak (planks) are suitable;
washers in the amount of 8 pieces. The most appropriate choice would be to use plastic copies. They will be needed in order to avoid friction of the bed legs when in contact with the supporting structure;
In addition to purchased ready-made materials, you will need metal bushings (8 pieces), which should be pressed quite tightly into the bearings, or rather into their inner hole. Such bushings are made only to order.

What else could you need? For the crib, it will be necessary to make a special box (frame), the design of which will serve as the basis for hanging the crib.

Procedure and necessary tools for making a crib yourself

Bed headboard size chart.

Before you begin making a crib, you need to evaluate your existing toolset. And if something is missing, it is better to take care of purchasing them in advance.

Hammer.
Roulette.
Level.
Jigsaw, the best option would be the electric one.
Sander.
Rasp.
Woodworking tools.
Any version of a milling machine and a set of cutters for it.
Electric drill and drill bit set.
Weight - will be needed to fasten the parts of the crib.

That's all for construction tools, but there is a separate list for materials. It includes:

Edged board (40 mm). It is better if it is a coniferous tree.
Beam (50x30 mm).
Oak or beech slats (20x20).
Glue, preferably epoxy.
Self-tapping screws.
High quality varnish for covering furniture and stain.
Plugs.
Corners for furniture.
Plywood (3-4 mm).
Nails.

If you have already purchased all this, then you can start making a crib with your own hands.

To determine the size of your future crib, you need to focus on the mattress.

Tools for making a baby crib.

The standard size of a mattress for a crib is 1200x600 mm.

This means that the sides of the crib will be located at a height of 900 mm from the floor. The back of the crib will be slightly higher - 1100 mm. So that the child, when he grows up, can climb into bed independently, the height of the sleeping place should not exceed 340 mm. And one more important point: the vertical slats of the end and side walls of the crib must have a gap of more than 120 mm. Only in this case will the child be safe, since he will not be able to put his head between the slats.

The process of making a children's bed begins with the manufacture of strapping parts for the transverse side and end walls. The boards are processed using hand tools or on a woodworking machine. Their width should correspond to 7 cm and thickness 3.5 cm.

the frame for the mattress will be made of bars. For a standard size, you will need 6 cross bars;
it is necessary to glue the frame parts using a clamp, and it is very important to ensure its squareness;
Then you can start making the backrest for the crib. Its size is calculated using the following formula: to 60 cm, add the value of the double thickness of the side parts and plus another 2 cm. Everything is quite simple. Next, the back frame is assembled onto a 3.5 cm spike;
to calculate the length of the transverse parts of the back, it is necessary to subtract the width of the bed leg, multiplied by 2, from the width of the back, and then add double the size of the tenon;
to make slats for the crib, use slats. As noted above, it is very good if they are made from wood such as oak or beech. Next, the planks need to be connected to the transverse parts using a blind single tenon;
After the headboard frame is assembled (without using glue), you need to measure the length of the slats. To the length that we got, we need to add 2 more values for the length of the spikes.

Please pay attention to the requirement for the quality of the crib, such as the absence of sharp parts, corners and burrs. Grind the rods very carefully, and all corners must be rounded using a special cutter. All these steps must be completed before you begin assembling the bed parts.

Return to contents

We determine the overall dimensions and draw up a drawing

The starting point is the crib mattress, or rather its dimensions. Spare no expense and buy your baby a high-quality mattress with a “complex filling” made of coconut fiber with layers of latex. The usual size of a children's mattress is 1200 x 600 mm. You will find out what other children's mattresses there are from the table below.

Spring mattress

Springless mattress

Latex and coconut fiber mattress

Cotton wool mattress

Foam mattress

Polyurethane foam mattress

The dimensions of the mattress are fundamental to determining the size of the crib. The height of the bed from the floor should be such that an older baby can climb into the crib on his own. It is recommended to make it equal to 350 mm.

The distance between the lattice and the solid wall of the crib is 12 mm, and between the rods - no more than 9 mm. Such indicators guarantee the safety of the baby. Based on these points, you can prepare a schematic drawing, which will make it much easier to work with.

Completion of the installation process

Assembling the headboard of a children's bed. To do this, place all the planks on glue and immediately finish assembling the back completely. Using a clamp, compress the resulting structure, not forgetting to check the correctness of the right angle.

assemble the side walls of the bed in the same way. All internal corners of the assembled bed must be processed using a cutter (rounded);
In order to assemble the side and end walls of the bed into a single whole, use self-tapping screws designed for woodworking. Their length is usually from 80 to 100 mm;
The bottom of the crib must be covered with a sheet of plywood and secured with small nails.

Once the assembly is complete, the most enjoyable moment comes regarding the finishing. You will be covering our crib with varnish. For children's furniture, it is better to choose a more harmless option. For an aesthetic appearance, 3 layers are required. After each application, wait until completely dry before sanding. The crib is now ready for use. Sweet dreams and good health to your baby!