Cabinets for needlework (28 photos): folding transforming cabinet for sewing

Filling

If you build or purchase a cabinet with built-in drawers, great. They can be small or large, with or without partitions inside. However, there is always a possibility that such a product may not be available for sale. If it is not possible to create such a product yourself, you can purchase a cabinet with regular shelves. In this case, the role of storage boxes can be played by boxes (for example, from shoes), plastic containers (glass can also be used, but they are too heavy), and bags.

To make maximum use of the useful area of ​​the cabinet, it is necessary to calculate the height of its shelves so that you do not have to “store” air in it. This is still more convenient to do if you make it to order or yourself.

In this case, you won’t have to take it out again and check the contents. This way you will simply save your time. It is convenient to use tapes if they are placed on cylindrical elements that are located horizontally.

In order not to look for suitable containers for storing handicraft accessories, you can purchase them in the store. Today, stores offer a wide range of different containers, containers and entire storage modules that may well come in handy.

Making a transforming bed: quickly and easily

We often give up a spacious bed in favor of a sofa, despite the fact that this is fraught with serious consequences - spinal diseases and lack of sleep. A transforming bed built into the closet is an excellent solution, because it is simply assembled and returned to its original position at your request. Plus, this bed doesn’t need to be made! It’s not so easy to find this miracle of design in stores, so we suggest you make it yourself.

Transformable bed

How to make a transforming bed with your own hands? We publish step-by-step instructions.

1. The support of the cabinet is a regular mattress with an orthopedic base.
2. We remove the strips of plywood, curved by the arc of the lamellas.
3. We mount the base of the future bed on medium-sized wooden blocks that can easily support any weight.
4. We make marks on the sidewall areas intended for landing.
5. We fasten the base of the future bed with the side panels.
6. Fix the front panel. With this, the main element of the cabinet is ready.
7. We fix the base of the cabinet to the wall of the house (the location of the future piece of furniture).
8. Using gas springs and a lifting mechanism, we proceed to install the frame.
9. We attach the bed frame to the base of the closet.
10. As the so-called front of the bed, we install cabinet doors into which it is necessary to install handles that serve as an auxiliary element for bringing the bed into a horizontal position.

Only 10 steps separate you from creating a transforming bed with your own hands. By using your imagination, you can safely start decorating it, thus turning your homemade product into a real work of art.

We give several recommendations for improving the miracle bed:

• linen cabinets, shelves for bedding, mirrors make the furniture multifunctional and easy to use;
• light bulbs and lamps allow the fittings to shine and give the furniture aesthetic appeal;
• the use of wood of various shades, cutting out patterns and the original texture of the handles creates unlimited decoration possibilities.

Remember, creating comfort and coziness in a home is always the work of its owners. We wish you creative thoughts, a wealth of imagination, and playful imagination!

Transformable furniture (video)

Folding tables for any room

In conclusion, I want to say that a folding surface - an additional table or shelf - will be appropriate in any room and for any purpose, be it a children's room, a bathroom or even a toilet. With it, you can arrange a comfort and relaxation zone everywhere; it can be a backup work surface and a seasonal helper (for example, for seedlings). It solves issues of landscaping even very small rooms, such as a balcony, storage room, etc.

1. Interior of a small kitchen: modern technologies for expanding space. Part 1

2. The folding table transforms into a painting

3. Folding table

4. Folding kitchen table

Advantages and disadvantages

Since its inception, transformable furniture has quickly conquered the market. This is because of its obvious superiority over ordinary furniture: it is more economical, takes up less space and allows you to keep everything in order. First of all, by combining several functions, such a cabinet will help save money, because instead of purchasing many things, it is enough to buy only one item. It will serve as a place to store clothes, dishes or books, and a mirror, and a work surface.

Such models are produced for different rooms. Most often these include small rooms, such as modest kitchens, bedrooms or even bathrooms.

For example, a stylish desk-bureau and a two-in-one wardrobe in the bedroom are folded out in the morning for applying makeup and tidying up. This way, you can save space and money without purchasing a dressing table. This model has a great advantage over an ordinary dressing table, since no one will see its contents. This option is suitable for those who do not always keep cosmetic bottles and tubes in order.

In addition, such a transforming cabinet can easily turn into a workplace. The tabletop can be combined with a wardrobe, but it is especially convenient when open shelves and a variety of drawers are arranged above or around it, allowing you to store work and educational materials. They can also be used to display memorabilia.

A retractable or folding tabletop is also a very convenient option for a narrow kitchen. It allows you to make the most of all space. Everyone who loves to cook dreams of a large workplace, but this is not always possible in our apartments. However, a transforming table will always help out by providing an additional work surface. And then it is easy to clean and put away.

An additional advantage is the variety of models of this piece of furniture. They are available in completely different styles and configurations; the tabletop can extend or fold out, or be built into a furniture set.

Building a classic version of a step stool

In order to make a transformable stepladder chair with your own hands exactly according to the drawings, you will need a minimum set of power tools:

• Jigsaw with a set of saws for wood;
• Manual electric router with 25 mm and 30 mm end mills;
• Drilling machine or drill with a device for precise vertical drilling;
• Polishing machine with wood attachment;
• Screwdriver;
• Set of carpentry clamps.

Since this design, in addition to the functions of a staircase, will also be used as a piece of furniture, it is best to choose a design with elements of carving and decor.

For the most part, a step stool will be used as a piece of furniture, so it makes sense to make it as beautiful and attractive as possible. In this case, decorative elements are practically not used; windows are made on the sidewalls in order to make the structure lighter and give it a more elegant look.

Structurally, each part of the step-chair consists of two sidewalls, between which four transverse steps are glued. One of the steps serves as a seat, the rest are used only for climbing stairs.

Initially, you will need to transfer the contours of the side posts of the stepladder chair to the boards. This can be done in two ways. In the first case, the contours are transferred by drawing lines using carbon paper. The second method allows you to do the work much faster - you can simply print out the outlines of the parts of the future step-chair and stick the paper on a wooden blank.

At the first stage, you need to make longitudinal grooves or cuts on each side of the large and small parts of the step stool, as in the photo. The grooves must be made for two reasons: firstly, they will be necessary for further processing of the workpieces. Secondly, the step boards will be inserted into the grooves. If you fasten the steps only with self-tapping screws, the rigidity of the step-chair will be very small, and the entire structure will quickly fall apart under the weight of a person.

Next, you need to make several through holes with a drill and cutter, preferably at the corner points of the internal contours. This must be done in order to be able to cut out selections along the openwork thread with a jigsaw.

Following the inner contours, we cut out the outer lines of the sidewalls in the same way. After all four sidewalls have been cut out, two for the larger part of the stepladder chair and two blanks for the smaller one, you will need to calibrate the dimensions, as in the video

https://youtube.com/watch?v=oQq1OMXHA1Q

To do this, two side blanks are folded in pairs and cut on a router. This allows you to make both elements of the step-chair absolutely identical in shape and size. At the same time, we remove chamfers and burrs, and treat the surface with a grinding and polishing attachment.

The steps for a stepladder chair are best made from oak boards, 15-20 mm thick. For the large swivel part of the chair, you will need to make three steps, all three of different sizes. For the smaller stationary part, you will need to cut two steps, also of different sizes. The step blanks, cut to size, are carefully glued to the sidewalls. To do this, you need to coat the gluing areas with wood glue or epoxy glue and insert the blanks into the grooves. To maintain the geometry of the step-chair, gluing is best done with fixation in carpentry clamps.

After the glue has dried, the steps of the step stool must be reinforced with carpentry screws. At this stage we have two small structures, one looks like a short chair, the second looks like a stool. To make a full-fledged folding stepladder out of them, you need to connect the two parts with a furniture or piano hinge.

Attention! To ensure that during use the vertical load on the step-chair does not deform or tear off the hinge fastening, special stop pins are used in the design.

The last element of the chair is the back. It must be made and a stepladder installed on the chair without fail. Otherwise, the front supports of the ladder will be unstable and will quickly fail.

The step-chair is almost ready for use; you need to finish the exterior with stain or varnish.

The result is a nice design that can not be hidden, but rather installed in the kitchen or hallway, where there is always work for such devices.

Materials

Among the most preferred options for a cabinet-table is, of course, natural wood. This material has the highest hygienic properties. It is considered the most environmentally friendly. Some even argue that wood has an overall positive effect on human health and well-being, concluding that living in interiors made from natural materials can promote improved health and emotional well-being.

In addition, it is a very aesthetic material that can take on any color and texture. But such products can be very expensive. Therefore, many people prefer options made from chipboard. It consists of slabs of compressed sawdust covered with a decorative layer.

Finally, there are plastic models. As a rule, they are used in a limited number of interiors, for example, in high-tech style

When choosing, you need to pay attention to the quality of this material so as not to purchase a toxic product. You should not chase the lowest possible price, as such a product can sometimes disappoint

High-quality plastic or acrylic is a material that is safe for humans and easy to use, which is an important factor when choosing furniture.

Models

There are several models of craft cabinets on the market.

Suspension

The cabinet has small dimensions and is hung on the wall. The door usually folds down, forming a convenient desk for work, similar to a secretary. Inside there are trays and drawers where you can put all the necessary materials for needlework. The convenience of this model lies in the fact that such a cabinet can be placed in any room of your home.

The facade can be matched to the main furniture of the room, and it will not stand out from the general style of the room. When closed, craft materials will not be visible, and the room will be in absolute order.

Floor

This furniture attribute requires a large area for its installation. Outwardly, it looks like a regular wardrobe, but when you open it, you get a whole organizer where you can place a huge amount of material, laying it out for convenience on various shelves and trays. It can be either small in size, for example, the size of a desk, or occupy the entire height of the room.

Very often, such cabinets are made to order by needlewomen so that they can have the functionality that is needed specifically for your activity. After all, the needs for filling such furniture, for example, for machine sewing and knitting, differ significantly. Typically, shelves in such cabinets are placed not only on the wall, but also on the doors. An interesting model is the matryoshka wardrobe. Its doors have wheels, and in addition to the fact that they fold out, the facades have another turn.

Built-in

A craft closet can also be an entire pantry. For such an attribute, you need to allocate several square meters of space and make a built-in structure. Externally, such a cabinet is very similar to a dressing room and can be corner, L-shaped or straight. Its shape depends on the layout of your room. The table here can be either folding or stationary. And the content depends only on your wishes.

DIY wardrobe-bed-transformer

Such furniture can last more than fifty years. Since the appearance of such models, their design has changed a lot - they can be folded vertically and horizontally, be two-tiered, with a huge number of additional functions.

Let's study in detail how to make a transforming wardrobe bed with your own hands. The drawings we will use have four main components:

• Lifting mechanism.
• Magnetic clasp to prevent the bed from falling out.
• Frame.
• Closet.

Preparing the necessary tools

Prepare the following tools for making transformable furniture with your own hands:

• Centimeter tape measure.
• Construction level, square.
• Screwdriver.
• Electric drill.
• Electric jigsaw.
• Grinding machine.
• Hex keys.
• Screwdriver Set.

The process of assembling a transforming bed

Assemble such transformable furniture according to these instructions:

• Frame assembly. The frame will consist of four boards of the same height, serving as sides for the bed. Try to make a rectangle with even corners. Connect the frames with wooden pins coated with glue. Once the glue has dried, secure the base with self-tapping screws and furniture corners. You can additionally nail a 100 by 50 mm cross-section around the perimeter to make a kind of limiter for the mattress.
• Assembling the bed base. Make it from a single sheet of plywood or knock it down from planks.
• Assembling the frame for the cabinet. Fasten the frame parts in the same way as fastening the bed frame parts.

• Legs for bed. Make them from wooden beams and furniture hinges to make them built-in.
• Installation of furniture mechanisms. Install the piston or spring mechanism according to the manufacturer's instructions.

As a result of performing all the above manipulations, you will receive a durable, beautiful, multifunctional design - a transforming wardrobe-bed with your own hands.

Dining table-book

A very popular option in the Soviet Union was a book-table with two folding surfaces. In normal times, such a transformer stood closer to the wall or in a corner and served as a surface for wiping dust, but on all holidays it was an indispensable nail, or rather a table. Modern designers have finalized the idea (which was just asking for it) by adding a book-table to the kitchen (with an appropriate design) and replacing the place of the shelves with a niche for folding chairs, thereby turning it into a transformable table with chairs. You can adjust its size by raising one or two “wings”.

A very interesting solution for the kitchen is our next sample. Transformable dining table three in one. The trick of this table is that there are not one, but two tables hiding on the wall! First we fold out the small table, and if a larger area is needed, we fold out the second one, which folds over the small one. When folded, this structure on the wall is 3-4 cm thick. This mechanism is also used for a table-picture.

The wall-mounted folding table with a stationary tea table with legs has the same functionality.

Step-by-step photo report

Let's take the following model as an example:

to his size

Prepare the necessary tools: tape measure, drill, drill bits, circular saw, Kreg Jig set, measuring angle, bolts and screws of various lengths. These things should always be at hand.

Work begins with assembling the racks and sidewalls:

Using a square, make sure that all corners of the assembled structure are straight. Mark the places where the sides will be fixed:

Fastening of sides with racks:

If necessary, the boards must be fastened from the inside at an angle. To drill pilot holes, use the essential Kreg Jig. This is a convenient and easy to use tool.

Attach the sides of the future bed to the posts:

The crib frame is almost ready:

Now attach the sides of the second tier:

Then prepare the places where the logs under the mattress will be attached:

First fill the unevenness and knots of the frame, then sand it. Next you need to make a ladder to the second tier.

Apply a first coat of water-based varnish. In this case, Lakra “Oak” was chosen. One of its advantages is that it has almost no smell

This is important since there are small children in the house. However, it also has a very unpleasant drawback - it is almost impossible to sand it, and even after drying, a sticky layer remains:

The second floor is almost ready. Next you can attach the logs.

Staircase view:

The staircase in this form is not entirely convenient - it “cuts” the legs, so it will need to be slightly modernized. But more on that later.

The top floor is already ready:

It is clear that the sides need to be increased. There is no need to add anything from the wall side. The bed will be close to the wall, which means there is nowhere to fall. On other sides this will definitely need to be done.

Next, lay the logs of the lower tier:

Now about the stairs. To avoid the awkwardness and pain of going down it, lightly sand the edges of the rungs with a hand planer or sander. This procedure will give them a neat appearance:

The result of the work:

As a result, you will get a reliable and stable structure. Now we can say with confidence that making such a bed yourself, given the abundance of materials and necessary tools that fill the shelves of hardware stores, is not at all difficult.

Transformable folding tables for the kitchen

If in the last century the main direction of folding tables were secretaries and coffee tables, now these are mainly dining surfaces. A modern family of average income can only dream of a large kitchen, 20 or more square meters, but in practice they have to be sophisticated: put as much as possible in the kitchen, while taking up as little space as possible. In the interior of an average kitchen 5-10 sq. meters, folding tables began to appear more and more often.

Wall-mounted folding tables can be assembled as a narrow shelf, or they can completely merge with the wall. Their unfolded size is also very different: from a tea table for 1-2 people to a full-size table for 6-10 people. No conditions are required for the location of folding surfaces other than for reasons of convenience. In this vein, the flight of fancy is not limited:

A folding kitchen table can be placed directly on the heating radiator. In addition to masking the battery, it will regulate the temperature in the kitchen. But you need to remember that the radiator cannot be completely closed, otherwise it will heat the countertop and poorly heat the room. To prevent this from happening, you need to provide ventilation ducts in the top shelf and on the sides.

Such a transforming table can become a mobile extension of the cutting room: along the windowsill, an additional surface at the sink, a table for cooling pies or a bar counter. It all depends on your needs.

Definition with the model and design of the wardrobe bed

The most important advantage of making a transforming bed yourself is the ability to choose any of the proposed designs, and even create your own.

Consider the appearance of the room when making a wardrobe bed.

First of all, you need to build on the existing style in the room. It is unlikely that you will be able to combine a modern design wardrobe-bed if other furniture is made, for example, in a classic style. The main thing is to maintain the harmony of the living space and prevent the mixing of radically different styles.

A sketch of the bed can be drawn on a piece of paper.

It is better if, already at the planning stage, a rough sketch of the future bed is drawn up. And the best option is to find any one you like on the Internet and adapt it as much as possible to your needs. In this case, you can also save a decent amount of personal time, which can be spent creating designs and drawings yourself.

Try to clearly draw a plan for the future bed-wardrobe.

Furniture production MK-ArionA

Transformable wardrobe for sewing and creativity

This model is designed for sewing, needlework and creativity.

The cabinet can be adapted for any hobby:

• change the dimensions, number of sections and their contents
• choose case color
• choose the color and shape of the fronts, bringing the cabinet as close as possible to the style of your interior
• supplement, remake, taking into account your specifics

Inside you will perfectly place everything you need: equipment, tools, workpieces, materials, fittings, accessories,

and the presence of wheels makes it easy to move the cabinet around the room.

Create your own creative space!!

Description of the cabinet

• Overall dimensions when closed: WxHxD mm: 830x1800x726
• Overall dimensions when open: WxHxD mm: 2390x1800x350
• Body and façade material: laminated chipboard
• Body color: Craft oak white
• Front color: Gray kraft oak

Cabinet components

• Five section cabinet
• Folding table 790x600 mm with two folding supports
• Shelves made of plexiglass and chipboard
• Pull-out shelves on ball guides made of plexiglass and chipboard
• Sloping plexiglass shelves for scrapbooking paper
• Limiters on plexiglass shelves
• Barbells with hooks
• Door locks
• Rubber wheels with stopper
• Pens

Additional equipment

• Backlight
• Equipment sockets
• Additional table top
• Cork, sheet metal for magnets, or graphite surface on the back of small sections

Cabinets for needlework (28 photos): folding transforming cabinet for sewing

SUM: 0

Specify the color of the product (Basic program) To view, move the cursor over the color field

Transformable wardrobe Comfort CRAFTBOX

For compact use and storage of sewing equipment and accessories.

(pictured is the BDAC package)

The order fulfillment period is up to 45 days from the date of receipt of money.

Dimensions:

– FAST TRANSFORMATION

– THREE SEWING MACHINE POSITIONS

– POSSIBILITY OF USING INSERTS

*INSERT for comfortable sewing L

(ATTENTION! Not included in the kit, must be purchased separately).

*INSERT for L cut

(made of MDF and included in the table set).

– THE SET INCLUDES: 3 spool stands (56 pcs), 5 sectional containers

– CHILD LOCK

– LED LIGHTING

– SOFT WHEELS

– POSSIBILITY OF SELECTING THE LOCATION OF MODULES

– Interior in White. In the selected decor, only side posts and fronts are made.

Standard arrangement: A,D,B (see section Dimensions),

Where

Module A – completely with shelves.

Module B – with holders and shelves.

Attention!! Module “C” must be added to the cart additionally.

Modifications with 1 module “C” ACDB, ADBC, ACDA, ADAC, BCDB, BDBC

Modifications with 2 modules “C” ACDBC, ACDAC, BCDBC

When ordering, please indicate the desired location (in the comments).

Certificates:

Kinds

A cabinet combined with a table is an excellent choice for many types of rooms. After all, it helps to save space in the room, and is also a stylish solution for decorating a room.

There are many types of such furniture:

Transformer

This cabinet is a piece of furniture with modification possibilities: it can be a retractable tabletop, which is hidden in a secret drawer, or a folding version. Such models can be angular or have a traditional design.

This also includes such an extraordinary method of organizing a workspace as a desk in a niche of a built-in linen closet. Sliding doors hide the tabletop and chair and open when needed. Transformable wardrobes or modular sets can have different types of doors. Sliding options are the most convenient because they do not require additional space in the room.

There are also options with ordinary doors, which sometimes may seem preferable due to their appearance.

With racks

Since a wardrobe with a transforming table can be intended not only for clothes, but also for other small items, for example, books, it is often available with shelves. They can be open or closed or have specific zoning. Open areas are designed to display beautiful things. They are also used in children's rooms to store books and toys.

Purchasing closed cabinets of this type for children is not advisable, since it can be difficult for children to use, and also pose an additional source of danger. Closed shelves usually serve as niches for linen and clothing, although this is not necessary. Some people don't like to store their things in plain sight, especially in the kitchen or living room, so they prefer these options.

Wall mounted

A wall-mounted cabinet table is attached to the wall at a certain height to also serve as a workspace. This usually applies to desks. The tabletop can be folding or retractable. Sometimes it is an extension of a stationary workplace.

This option looks unusual and is very convenient in everyday life.

Secretaire

This cabinet is also called “with a secret”. This is because it looks like an ordinary piece of furniture with a large central section. However, the door of this compartment hinges on durable metal fasteners, turning into a desk. It is better not to put a lot of books and textbooks on such a tabletop, so it is considered the most preferable for working with a laptop.

This option is chosen by those who do not work so much at a desk that they need to furnish a separate office for this or buy a massive, expensive table. However, if such a need arises periodically, the secretary is ready to provide a workplace of the required size.

The Bureau

This piece of furniture is a compact tabletop with small add-ons. Typically, this piece of furniture is made in the Baroque or Rococo style, decorated with expensive wood, gilding and has elegant lines.

Table-stand-cabinet

The folding table is a spacious cabinet with drawers and folding doors. This is a very convenient option for small apartments during the holidays, since when unfolded, such a table allows you to seat a large number of guests and turn the living room or kitchen into a dining room. And after that it’s easy to fold and put away; it will take up 30-60 cm of space, which is quite a bit.

Its drawers are convenient for storing dishes that are not used every day, tablecloths, napkins and other similar small items. The modest dimensions of the cabinet-table allow it to be stored even in a closet or on the balcony, however, it can be used every day, for example, by opening only one door.

DIY sewing machine table

Here's how to make a DIY sewing machine table from Ingo's dining table. It's much easier than you think! Just look carefully at the step-by-step photos and, if necessary, read the instructions on the website linked below the gallery to get a good idea of ​​what you're going to do. It is sometimes easier to look at photographs in later stages to understand the initial steps. If you purchased an Ingo table, make sure it is fully assembled. You will need to remove the tabletop later, but you need the table fully assembled.

Materials: Ikea INGO or another table with a crossbar under the tabletop. It will be needed to attach the support beams that will hold the machine. You will also need two boards. One as a shelf on which the typewriter will stand under the table; it should be at least 5 cm longer and wider than the typewriter. The second should be twice the width of the table.

Place the sewing machine on a table and a suitable place for easy sewing. Draw the outline of the car on the table. Carefully cut a hole along the lines. Go slowly, especially around the corners, to get nicely rounded corners (if you have a straight corner sewing machine, you'll want to cut it into a perfect rectangle). Now insert the clipper to make sure it fits snugly into the hole. If the shaft is a little narrow, sand the edges with sandpaper. Once you've made the hole the right size, sand all the edges, first with medium-grit sandpaper and then with fine-grit sandpaper until the surface is smooth and flat. Then turn the table over and measure the distance between the front and rear tires. Saw into two pieces the same length as the distance between the slats and make sure they fit snugly between them. Screw the inserts to the bottom of the table using a Krag Jig. Mark holes for the bolts that will hold the sewing machine shelf. Be careful not to mark too close to the front edge, you should leave at least 8cm at the front and back. Then unscrew the tabletop and move it to the side for now. Drill 4 holes in the inserts. Insert the bolts so they are flush with the top but not protruding outward from the tabletop. Remove the bolts and set aside for now. Turn the table over and check how the shelf will stand. Now you can collect

First, insert the bolts into the holes you made earlier. Holding the bolts in place so they don't slip out, carefully flip the table back onto the tabletop and secure the pieces. Finally, attach the shelf on which the machine will stand. After that, place the machine on the shelf and simply tighten or loosen the nuts until the machine is at height, flush with the surface of the countertop. Pull the cords through the hole and place the machine back on the shelf. Connect the cords, turn on the machine, and check how it works.

Looks much better than plastic sewing tables. It costs less, and you have reason to be proud that you made this sewing table with your own hands.

Photo source frommartawithlove.com/2012/10/diy-ikea-sewing-table-tutorial

Here are three more options for converting a regular table into a sewing table.

Using the dining table for sewing is of course a solution, but you must admit, there are a lot of inconveniences. A specialized table is not cheap; it is much easier to convert an existing table into a sewing table. The task is not so difficult, make a recess in the tabletop to install a sewing machine, plus think about drawers, shelves for placing sewing equipment, fix the wires, adjust the parameters for comfortable work. You can see an example of such modernization in the photo.

Photo source www.makeithandmade.com/2013/11/easy-diy-ikea-sewing-table-hack.html

Another example photo, if you need step-by-step instructions, under the photo is a link to the site, where the process is described in great detail.

Photo source www.freemotionquiltingadventures.com/2013/10/how-to-make-sewing-machine-table-great.html

And the third example is how to make a modernized sewing table for comfortable work.

Photo source www.freemotionquiltingadventures.com/2015/02/diy-sewing-table-updated-improved.html

home_and_garden

Furniture for handicrafts

I accidentally came across a video online about a transforming wardrobe:

Like this in the tree:

Other cabinet model:

Table. At first glance it looks simple:

Also available in black:

And you don’t need to invent anything. Everything has already been done.

Information about this community

• Placement price 50 tokens
• Social capital9 421
• Number of readers 2,500+
• Duration 7 hours
• Minimum bet 50 tokens
• View all Promo offers

• —
• leave a comment

For a more complete audience coverage, I ask for a selection of compact home workbenches

This, I think, is not for pros or more or less serious seamstresses. That's it, have fun.

It is most likely not for seamstresses at all. For sewing. Only for sewing the table is too small and there are not enough large compartments for fabrics.

It’s more for creative people who either do scrapbooking, weave with beads, or embroider, and sometimes they need to sew something.

I dreamed about this myself and the other day I bought Box78.su, I bought it there and am very pleased)) their website is still under development, they are finishing it, but the closet is a bomb. I was not afraid to call and did not regret it! With all the jars and containers together. Just ecstasy!! Everything fit in, I also ran around the apartment and collected all sorts of buttons)) I highly recommend it. It's much more expensive from America. I was wondering)) I’ve been waiting for two years for it to appear in Russia)) of course, it’s big, but they have two sizes, better call and find out everything.. they told me there will be photos and videos soon, but so far they’re having a hard time with it, although the closet is excellent.

P.S. The table is VERY strong. The Russian cabinet has much stronger legs than the American one.

Crafts cabinets

Relatives of needlewomen know: threads, scraps of fabric and even needles are found here and there. And the needlewomen themselves are familiar with situations when there are so many consumables that it’s even difficult to find a place for them - especially in small-sized apartments. There is nothing more valuable than something made with your own hands, but jars with ribbons, scraps of fabric, bags with buttons, located in random places, make the interior look sloppy and greatly spoil it. If your activity has reached such a scale that there is a shortage of space for supplies, it’s time to think about a craft cabinet.

Present

If you do not do needlework yourself, but simply have such a craftswoman in your family or among friends, then a special cabinet will be an excellent holiday gift. You can either buy such a cabinet or build it yourself. In the latter case, your craftswoman will be doubly happy.