How to crochet a chair cover, stages of work, suitable decor

Who said crochet is outdated? Why not give the furniture some coziness, make it softer and more pleasant? In this case, you don’t even need any investments other than a set of hooks and threads! You can read how to make accessories for furniture in this article.

To make a beautiful crocheted chair rug, you need to study the diagrams and descriptions. Below are patterns for knitting accessories for chairs yourself, which can be repeated without problems.

Sizing

In order to take the correct measurements, you should choose the style of the cape. It could be:

• a cover that follows all the contours of the furniture, covering or not covering the legs;
• product in the form of a cross covering the back, seat, armrests;
• a rectangular cape covering only the back and seat;
• covers for the seat and back, knitted separately;
• a cover for chairs that covers part of the back only in the place where the head of the seated person is located.

The most difficult thing to take measurements for is a one-piece cover. You will need to measure all the parts of the chair and repeat their outlines. Start knitting from the bottom, measuring the girth of the place to which the cover will hang. Knit the fabric up to the level of the seat, then form the back. Lastly, the armrests and the inside of the furniture are taken care of.

If the chair is at hand, it is easier to adjust the size of the product directly to it. You should take into account the properties of the threads from which the cape is made. If they can shrink, then you need to add a few centimeters to all parameters.

For the cross cape you will need the dimensions of the back, seat and armrests. We must not forget that the product should hang down at all ends. Exactly how much depends on the desire of the craftswoman. The hanging part along the back should be of such length that the cape does not slip off, the same applies to the armrests. If desired, you can attach it with buttons or Velcro to further secure the product.

The length of the overhang is equal to the thickness of the seat, approximately 10 cm, but this parameter may vary depending on the knitter’s idea.

The cover for just the seat or just the back is made exactly according to measurements, taking into account the shrinkage of the fabric. The product must tightly cover part of the furniture and be fixed on the back side with an elastic band, Velcro, or other means. A knitted cape for the headrest of a chair can be of any shape and size. It rather serves a decorative function and is made using the same technique as other products, for example, a pillow lying on a furniture seat.

Correct sizing

A cover that completely covers the furniture

Product in the form of a cross

Rectangle cape

Cape for the head of the chair

Materials and tools

The result of knitting depends on the hook and thread. The yarn must match the purpose of the cape. Typically, the product is knitted from thick, dense threads to provide furniture with wear protection for long service. Their composition can be different: wool, cotton, synthetics or mixed options. The fabric made of polyester cord 3 mm thick has good qualities.

It is better to take threads that do not shrink, are easy to wash, and dry quickly. As a rule, they contain synthetics. To knit a warm blanket that makes your favorite furniture cozier, you can use wool or combine it with acrylic. It is better to make covers for children's chairs from cotton or viscose. Thin threads are suitable for decorative items; the pattern from them will be openwork and delicate. Most often, craftswomen use leftovers that lie idle to knit such things. This option is especially suitable for capes made of square motifs.

At its thinnest part, the hook should be half the size of the thread. Usually this recommendation is indicated on the yarn package. When knitting, unless there are separate instructions, the thickness of the thread should match the thickness of the product.

We sew the simplest blanket

For those who prefer sewing to knitting, there are also many ways and tips on how to sew an interesting and original cape.

Take any fabric you like and, having decided on the size of the future blanket, simply trim the edges. Fringe or ruffles will be a wonderful decoration. And from many multi-colored scraps you will get a luxurious patchwork-style bedspread. Sew them together to create a unique pattern, or create a whole picture - in any case, such work will bring a lot of pleasure.

Design and decor

You can decorate furniture with unusual knitted covers in various colors, shapes, and patterns. Depending on the technique of making the canvas there are:

• solid smooth;
• openwork with varying degrees of density;
• solid with a three-dimensional pattern;
• with various motives.

When choosing, you need to take into account that solid fabric is suitable for a classic style; it better protects the surface of the furniture, but washing can be labor-intensive. It will be even more difficult to clean a cape with a voluminous pattern. For beginner craftswomen using the technique, openwork solid fabrics or motifs are suitable. Such products are quickly knitted, do not require much thread consumption, and are easy to wash and dry. Capes with voluminous and openwork patterns are ideal for interior styles such as country and Scandinavian.

It is better to start knitting with a test sample measuring approximately 10 x 10 cm. This will allow you to understand what size of fabric is needed and evaluate the effectiveness of the appearance.

By color, knitted furniture covers can be:

• plain;
• nuanced (using similar colors);
• contrasting.

Various types of fringe, cord, pompoms, buttons, and knitted elements are used to decorate the finished item. It is better to use bulk beads on the back side of the back.

We knit beautiful blankets with knitting needles: the best ideas with descriptions and diagrams

Knitting a blanket with knitting needles is a labor-intensive process that requires a lot of time and a certain skill, but our tips will help beginning knitters. For the first work, you should choose a simple pattern, a model consisting of individual sewn elements, or a blanket made of thick yarn. Read more about how to knit a blanket with knitting needles.

Chair cover with square motifs

This is a great way to use up leftover thread. There are motives:

• round;
• square;
• triangular;
• hexagonal and octagonal.

The square shape is considered the most favorite among knitters. Such motifs are simple to make, easy to stitch and help create a dense, continuous fabric without large holes. They are made in any color, often combined. An undoubted advantage of knitting with motifs is that the craftswoman does not have to hold the entire fabric in her hands (which becomes heavier over time). To knit a chair cover from squares, it is better to choose yarn of two or more colors. You can use leftovers, but the threads for tying fragments should be of the same type and shade.

Knitting is done according to a simple pattern:

1. Close the chain of 12 VPs into a ring.
2. Knit 1 ch for lifting, then 23 sc in the ring. Close the row SSt.
3. Make 3 ch for lifting, 2 dc from the same loop, 1 ch, then 3 dc in the third sc in the second row, 5 ch, 3 dc in the third sc in the second row. Knit this sequence until the row is completed. Finish with an arch of 5 VPs and close the row of SS.
4. Perform 3 VP for lifting, 2 Dc, 1 VP, 3 Dc in 3 Dc of the third row, 4 VP, 1 Dc in the middle of the arch from 5 VP of the third row, 4 VP, 3 Dc in 3 Dc of the third row. Knit this sequence until the row is completed. Finish with an arch of 4 VPs, close the row of SS.
5. Make 3 VP for lifting, 2 Dc, 5 VP, 3 Dc in 3 Dc of the fourth row, 4 Ch, 3 RLS so that the middle one matches the RLS of the 4th row, 4 VP, 3 Dc in 3 Dc of the 4th row. Knit the sequence until the row is completed. Finish with an arch of 4 VPs, close the row of SS.
6. Knit 3 VP for lifting, 2 DC, 1 VP, 3 DC in the arch, 3 VP, 3 DC in the same arch, 1 VP, 3 DC in 3 DC in the fifth row, 5 VP, 1 DC in the middle SC in the 5th row, 5 VP, 3 dc in 3 dc in row 5. Knit the sequence until the row is completed. Finish with an arch of 5 VPs, close the row of SS.

To calculate how many such squares need to be knitted, the length and width of the intended product are divided by the length of the side of the resulting motif. After a sufficient number of elements have been made, they are steamed and covered with a damp cloth, through which they are treated with steam using an iron. All squares must be the same so that the product does not bubble.

Related motifs are sewn together with a needle or hook, which should be smaller in diameter than the main one. You can connect the squares while creating the last row. The edges are tied around the perimeter to visually combine the motifs into one composition. A beautiful crocheted chair cover is ready. It can decorate an armchair, a chair, or a stool.

Scheme

We collect a chain of air loops and close it into a ring

We knit single crochets and close the row with connecting stitches

For the second row, tie a thread of a different color and knit according to the pattern

Add a thread of a different color to the next row and knit with double crochets

Add air loops to the last row and close with a connecting loop

Ready-made square motif

Using the same pattern, we make many square motifs.

Sew the squares together

The chair cover with square motifs is ready

Making an overhead stand for the armrest of upholstered furniture as a bookmark

An overhead stand for the armrest of upholstered furniture, a sofa or an armchair, a convenient thing. It takes up practically no space, but you can put a mug of coffee, a glass of wine, and, for football fans, even a bottle of beer with a plate of chips on it. To make a stand, the following Tools and materials are required: - Board: - Circular machine; -Roulette; -Pencil; -Jointing machine; -Epoxy resin; -Dye; -Sandpaper; - Fasteners; -Screwdriver; -MDF; -Scotch; -Glue gun; -Putty knife; -Burner; -Plane; -Pliers; -Hacksaw; -Insulating tape; -Carpentry glue; -Varnish; Step one: preparing parts To make the stand, the master used a red cedar board. Sawed into two parts.

Then he passes the halves through a jointer and evens them out in thickness. Cuts to size.

Step two: preparation for pouring A box is made from MDF.

The bottom of the box is sealed with tape. Places the workpiece inside. Now you need the distance on both sides of the workpiece to be the same. Levels workpieces. Use a glue gun to fix the workpieces and close the cracks of the drawer.

Step Three: Pouring Mix the epoxy resin according to the instructions. Pours into two glasses.

Adds a different dye to each glass. Add pearlescent flakes (decorative) to one of the glasses. Stirs the contents.

Levels the box.

Pouring epoxy resin between the workpieces.

To remove air bubbles, heat the epoxy with a torch.

Step four: processing The resin has hardened, and the craftsman removes the workpiece from the box, planes it and grinds it.

Step five: making a stand Measure the width of the sofa armrest.

Sawing the workpiece into three parts. The angle was 45 degrees.

All three parts of the stand are connected using flat dowels and glue.

Step six: processing, finishing Wet the stand and let it dry. This technique raises the fiber and then you just need to sand it. To add shine, rub the surface with shavings.

Now you need to wipe the surface and apply four layers of varnish.

Openwork cover for a computer chair

A computer chair on wheels that is comfortable for working, usually has a separately attached back and seat. You will need two covers for it. You can take as an example a motif called “granny square” and knit an item based on it.

The sequence of knitting an openwork cape-cover based on a “granny square”:

1. Close 5 VP into a ring SS.
2. 3 VP for lifting, 2 treble dc in the ring, 2 ch, 3 treble dc in the ring, thus knit 4 groups of loops of 3 treble dc. Finish row 1 VP and close St.BN to form an arch.
3. 3 VP for lifting, 2 St. CH in the arch. Work into the next arch 3 dc, ch 2, 3 dc. Then 3 dc, 2 ch, 3 dc in the next arch and so on. Close row 1 VP and St.BN.
4. 3 VP for lifting, 2 treble dc in the arch, 3 treble dc in the gap between groups of 3 treble dc 3 rows, then tie 3 treble dc, 2 treble dc, 3 treble dc into the arch. Then continue in the same way until the row is completed. Close row 1 VP, 1 St.BN.
5. Knit in this way to the desired fabric size.

It is necessary to knit two openwork square fabrics according to the size of the back and seat, with an allowance on the reverse side of approximately 15 cm. Using a pin, you need to insert a linen elastic band of a suitable color into the holes formed along the edge of the motifs. Place the knitted covers on the computer chair and tighten the elastic band. The main thing is that the product tightly covers the surface of the chair. Cut the elastic and sew the ends together.

Steaming can be done directly on the chair so that the shape of the cape exactly matches the design of the back and seat. Even a novice craftswoman can easily make such a case. For more experienced people, you can take a pattern of an openwork napkin or tablecloth.

We collect air loops and close them into a ring

We knit double crochets and form an arch

By analogy, we knit groups of loops until the desired size is obtained.

Add a thread of a different color

We knit two fabrics: for the seat and back

We put a pin on the elastic band

Along the edge of the fabric we thread the elastic through the openwork holes

Openwork cover for a computer chair is ready

How to knit car covers

Knitting covers for your own car is a fairly simple task. But most people face the problem that there is very little information on this topic on the Internet. In this article, we’ll look at how to cope with this task without much effort and please your woman’s car with a new thing.

Covers knitted for your own car are quite popular now. Such an accessory can be given to any car enthusiast and for him such a gift will be very pleasant and necessary.

Sizes: 36/40 (42/46).

Product length: about 75cm.

• mixed yarn (50g per 90m) – 700(800)g;
• sp. No6.5 or No7;
• auxiliary sleep;
• buttons Ø44mm – 6 pieces.

• elastic band: 2l.x2i. In the first person. R. we start the pattern with 1l.;
• pattern “Large pearls”:

1p.: *1l., 1i.* – from *and to * repeat on all sts;

3p.: *1i., 1l.* – from *i to * repeat on all sts;

Repeat from the 1st to the 4th row;

• arana: see diagram on 42 (46) p. + 2 cr. On the inside R. all items according to fig. We knit from the 1st to the 12th row to knit the sides of the elastic band. Then for bevels of stripes we repeat from the 1st to the 8th row, for a braid from the 1st to the 6th row, for a flat braid from the 1st to the 10th row. At the beginning of the river after 1 cr. knit 1l, 2p. in 1l. broach (1 p. remove knits., 1 p., stretch it through the removed one.) At the end of the r. We knit the 3rd and 4th stitches in 1l., 1l., 1kr.

On the knot “Large pearls” 14p. for 22r. equal to 10cm by 10cm; on arans 19p. for 22r. equal to 10 cm by 10 cm.

Knitted cape, description

We start knitting capes for women by casting on 66(70)p. knit 1 p. purl, then switch to elastic. We do 12 rubles. We continue further knitting with the main pattern. At 3 p.m. We're starting to increase. Add 1p on both sides. 2p., in every 2nd r. 2 rub. 3 p., 1 p. 5 p. and 1r. according to 7(8) p. We get 106(112)p. We include all the added loops in the drawing.

Decoding the circuit for beginners

In order to easily read patterns for chair covers, you should know how different types of loops are indicated on them. You can find them on specialized resources for needlewomen. Graphic images usually use the symbols presented in the table.

When it comes to deciphering circuits, you should know the most important rules. If the patterns are knitted from the center to the edges, in straight and reverse rows, they need to be read from bottom to top. Odd rows should be deciphered from left to right, even rows – vice versa.

A handmade cape will definitely give your home comfort and a special atmosphere. It will protect furniture from dirt, animal claws, and help update the interior. Knitting is not particularly difficult even for a woman who has never picked up a crochet hook or knitting needles before.

Conventions for crochet patterns

Work examples

Below are several examples that clearly show how interesting and attractive a hand-knitted cover or rug can be.

Thus, if you have free time, a skein of yarn and imagination, you can do a good job updating old, battered furniture. But even if it’s not old, an original crocheted stool cover will be able to add zest to the interior decor and bring a touch of harmony to the home microcosm.