How to choose a corner wardrobe in the hallway - types of design and furniture perspective

It is much more common to remember first impressions of something, as opposed to the person's subsequent reaction. Therefore, it is worth decorating your hallway beautifully so that guests have something to remember when leaving your home. Today we will talk about the corner cabinet. This element of furniture is extremely important, as it takes on an aesthetic and functional role. And guests most often look at furniture. But you will have to make sure that the wardrobe does not take up too much space in the hallway. And in addition, all things must fit.

Corner closet in the hallway.

Types of structures

Option for a hallway with a pattern.

Choosing a good corner cabinet is not difficult now, because the range of choices is quite large. Now there are a variety of options that differ from each other in some ways, but at the same time do an excellent job.

Wardrobe with leather upholstery.

Ideas and models

The functionality of the attic floor is enhanced by built-in furniture. Let's look at some interesting ideas and designs.

Built-in wardrobe with wardrobe compartment

If there is a shortage of space, you can get by with a low cabinet

Interesting arrangement of two door wardrobes in a small room

The withdrawable module allows access to things

Variety of angles

Laconic hallway design.

With the standard layout of apartments in multi-storey buildings, the corner closest to the door is always internal. True, there are also exclusionary situations in a private house or luxury apartment.

Small closet in the hallway.

But if we are talking about “Khrushchev” buildings, a closed cabinet or an open shelving would be very practical. But a wardrobe definitely won’t fit here, although you can come up with something. Of course, this will be an individual order. However, if you don’t want to bother with installation, just install open shelves (stands with hangers are included in the package).

Compact corner cabinet.

How to fill corners

Built-in furniture helps save every centimeter

In addition to sliding wardrobes with beveled doors, the corner space can be filled with built-in cabinets, equipped with closed niches or open shelves.

Often a low cabinet or chest of drawers 80–120 cm is purchased, and a shelving unit is added above it or shelves are made. This economical option allows you to use the entire space.

Low corner areas under the attic windows are considered “dead”. If there is 60 cm or more under the window, build a frame there for compartment or hinged doors. In such a closed corner you can keep any items, including a vacuum cleaner and other equipment.

What modules are there?

A stylish wardrobe option.

Corner wardrobes are divided into several designs:

Triangular is a very chic, but not very comfortable furniture option. Firstly, its bulky size does not allow it to be effectively placed in the hallway. Secondly, the internal sections of the structure are not particularly spacious.
The five-wall cabinet - the back of the cabinet is angular, but its side shelves protrude perpendicular to the walls. In general, a decent appearance and effective functionality are formed. This cabinet is easier to place than the above mentioned option. In addition, it is easy to fill with all the necessary things. It's quick and easy!
Trapezoid - this module implies beveled or rounded corners. The design has original properties and impresses with a high level of convenience. Of course, the dimensions here also violate all boundaries, especially if additional furniture elements are placed nearby.
The letter “G” - as you already understand, this is simply an ideal option for the corners of the hallway. Fits chic into any corner and is quite easy to fill with various things. The level of capacity is lower than that of the above options.
Radius - a design with complex shapes that accommodates chests of drawers, banquettes and other departments. This type of furniture is placed in a convex or curved position. But in no case should you install this structure in a small room. In fact, you probably won't even be able to do it. Typically, radius wardrobes are used very rarely in standard-plan apartments.

Concave wardrobe in the hallway.

Features and Benefits

An ordinary cabinet installed in sloping ceilings and walls will not be able to fully utilize the room. The attic closet has non-standard shapes; Sloping doors or tilted back of the cabinet.

Unlike conventional cabinets, it has a lot of advantages:

The compartment façade saves space.
Thanks to its shape, it allows you to use the entire area up to the ceiling.
Following the contour of the wall, the cabinet rationally uses the sloping corner of the attic and uses “dead zones”.
Softens interior imperfections.
Makes it possible to simulate internal filling.

The non-standard shape of the cabinet allows you to use the entire space

What is the prospect

Spacious closet option.

The advantages of corner cabinets are as follows:

Sufficient capacity. The threshold for choosing corner cabinets is really wide, so you can choose a design for yourself in a variety of sizes. This means you can count on being able to fit as many necessary and unnecessary things as possible.
A share of ergonomics. Even if you have a small hallway, don’t despair. A corner wardrobe will fit perfectly into your home interior, regardless of the size of the room. Moreover, you can easily increase the space using an artificial method - placing mirrors.
High level of functionality. Since there are different compartments inside the wardrobe, you can store a wide variety of items in them. This design contains drawers, shelves, hangers, etc. In addition, you have the opportunity to store unusual items in the closet thanks to open shelves. Often this includes those things that are not considered wardrobe items. This could be flowers, perfumes, cosmetics, etc.
Original style. Due to the wide range of choices for the best and most suitable option, the hallway closet can easily be adapted to the current home interior. At the moment, various design solutions are available that allow you to freely use a wide variety of furniture. If we talk about the hallway, then in this case it is important to take into account the tone of the walls and floor. If the cabinet does not match them, the overall harmony of color is disrupted. And this causes irritability and indicates careless taste.

Original style and interesting solution in the hallway.

Interesting solutions in interior design

A wardrobe with beveled doors can be built under the stairs leading to the attic floor. If all doors have a bevel, then only a swing system is suitable.

Under-stairs cabinet with end shelves

It is not necessary to build a monolithic model under the roof slope. The wall can be divided into parts and visually enlarge the room. Place a desk or computer desk between the cabinets. You can set aside this space for a mirror with a dressing table.

Separating cabinets with a table eliminates “furniture heaviness”

Mirrored facades fill with light and “move apart” the walls. The mirror can cover all doors or just one. Combined options work well, where mirror inserts occupy half or a third of the facade.

Mirror effect doubles the area

A small room needs light furniture. A cabinet located along the entire pediment will not “eat up” the room, but will expand it.

For attic rooms with a small window, choose white furniture

A beveled closet zones the space

Spectacular white bedroom

A Question of Choice

Sliding wardrobe with a pattern on the doors.

As we said earlier, a corner wardrobe is just the perfect addition to your hallway. In place of a bare corner, you place an item that will be in demand among the whole family. Now the entire family wardrobe will have somewhere to hang and fold. Today there are quite a lot of extraordinary designs that you will like one way or another. But are they really suitable for your hallway? This is a question worth giving serious thought to. But first, pay attention to some aspects before making a purchase:

Black and white hallway.

Form. Naturally, the main attention is paid only to the corner cabinet. But what is the depth and height of the product?
Dimensions. Take all necessary measurements of the work area in advance to be aware of the design parameters.
Capacity. More is not always better. Because some large cabinets hold much less things than more compact options. Of course, filling it out incorrectly will also make the situation worse. Also, do not forget to check the availability of hangers, drawers and shelves, since storing things in one pile is simply unacceptable.

Sliding wardrobe in home interior.

The sliding wardrobe fits well into the home interior due to its versatility. There are plenty of corner modules on sale. Do you want to achieve more originality? Pay attention to the interior and exterior of the structure.

Corner wardrobe.

Visual variety

Option for a mirrored wardrobe.

The sliding wardrobe is designed in a variety of design options:

Semicircular corner hallway.

Mirrored. An elegant way to decorate your hallway. It is also a visual expansion of space. Cabinet options are available in full and partial mirror design. That is, either the cabinet doors are completely covered with a mirror, or have separately built-in mirror elements.
Stained glass. An original glass sheet interspersed with colored pieces on top is used. Sometimes the whole picture is formed in this way.
Photo. Thanks to photo printing, it became possible to overlay an image on a mirror surface. This technique is especially applicable in the practice of radius cabinets. With it, photo printing gives the room a feeling of incredible comfort and tranquility.
Sandblasting drawing. Can be compared with the above mentioned method. Here you can also draw various drawings. The method differs in that the glass retains its reflection effect with the exception of matte surfaces.
Use of natural materials. Professional designers recommend using leather, bamboo, rattan, etc. to finish the front mirror sides of a sliding wardrobe. This is something more original and perfectly increases the level of comfort in the room.

Printing patterns on a mirror.

Convenient arrangement of things

To properly arrange your partitions, you first need to visualize how much space will be used. To do this, first draw a diagram of the shelves.

The length is usually about 60 centimeters. It can be a little shorter if the shelves are located in P and D. With pull-out shelves, the cabinet becomes more convenient to use.

You can make your wardrobe smaller by storing several items in it. A person can be wealthy and still have enough space for a small clothing storage unit to store a small amount of clothes and shoes.

Fashion-conscious women often have closets full of items that have been worn once or twice. This category of beautiful ladies needs cabinets that literally support the ceiling, so that they occupy all corners of the room. Then there is a chance that everything is in its place. The correct arrangement and filling of shelves and compartments in such a wardrobe allows you to rationally arrange all the things that will always be at hand.

The upper shelves are very functional. You can insert items that you rarely use:

Suitcases;
Grandma's blankets;
extra pillows;
boxes

and even more.

There will always be items that you need “someday” that can still be useful, and it’s a shame to throw them away.

Drawers and shelves

Drawers are a useful and necessary feature that are ideal for storing:

Underwear;
Towels;
Noskov.

Pull-out baskets are available in plastic and mesh cases. They are functional and compact, they can be used to store small items that do not need to be ironed.

Shoe shelves at the bottom of a corner cabinet can be slanted or pull out, and shoe pads are often found that also hold their shape firmly in place. These shelves are installed in the lower compartments. They can be placed at an angle and are also movable.

Pull-out hangers for jeans and suits are practical devices. It is wise to use a special compartment in which accessories are hung: ties, belts, scarves and similar items.

Sometimes special shelves are installed underneath them for storing household appliances: iron, vacuum cleaner, dryer, etc.

Shoe storage

Firstly, if you are not dealing with rough everyday shoes, store them not in the hallway, but with the rest of your wardrobe. This will make it much easier to come up with the full picture. And if necessary, quickly try the resulting combination. In addition, there will be an incentive to keep your shoes in perfect order. By the way, it depends on how long they will last.

The easiest way is to place the shoes in a row on the bottom shelf. Once again, no boxes! Not only will you save a lot of space, but you won't miss a single pair of shoes.

A slightly more complex option - on shelves along the entire height of the cabinet. The main rule is to place shoes only in one row, otherwise you can get a complete mess. Questions arise about placing the load in an inclined position. Yes, it looks impressive in photographs, but you are unlikely to be satisfied with shoes that constantly fall off.

For this reason, we consider retractable rails to be the most convenient method. The shoes are located very compactly, but at the same time the pairs are easy to get and inspect. Another good option is to divide them into very small compartments, but these may not be very convenient for storing boots and they eat up quite a lot of closet space.

In addition, pull-out shelves are often used in design. If you don't have such a large closet, you will need to add just a few of these shelves, which will help improve the organization of things.

It is important to consider the features of shoe storage. For example, leather shoes should not be crushed, otherwise they may become dented, while suede shoes may have scratches. Therefore, you need to be careful when storing shoes at an angle on the rails. If you do this, make them wide and roomy enough.

Sources

https://made-box.ru/vnutri/napolnenie-uglovogo-shkafa-kupe.html
https://oboiman.ru/inside/napolnenie-uglovyh-skafov-22-foto-vnutrennij-dizajn-s-asikami-vnutri-razmery.html
https://kuppe.ru/napolnenie/uglovyih-shkafov.html
https://stroy-podskazka.ru/shkafy/uglovye/napolnenie/
https://flat-house.info/udobnoe-napolnenie-garderobnogo-shkafa-kupe-primery-napolneniya-uglovyx-shkafov-kupe/

Internal components

Sliding wardrobe with a pattern on the doors.

The question of the order of internal placement of things is considered important, since it determines how much free space you can use. A closet in the hallway is usually needed for seasonal shoes, outerwear and hats. Accordingly, it is recommended to purchase drawers (preferably sliding) for the inside of the cabinet. In addition, you will need additional shelves and small drawers (good for storing gloves, cosmetic bags or other small items).

Sliding wardrobe with an image of the Eiffel Tower.

In general, a wardrobe cannot be considered a cheap pleasure. The price of this item directly depends on the materials and dimensions of the structure. The pricing policy also depends on the sphere of design and production (meaning the brand that produces these products).

Corner cabinet in Walnut color.

Step-by-step instruction

Preparation

Shape and size

The shape of a corner wardrobe can be:

triangular _
This option is installed in a corner. This structure does not have side walls, and all the filling is attached to the walls. Such furniture looks harmonious in square rooms. It smoothes and hides corners to advantage;
trapezoidal .
This design has a small side wall on one side, which creates the shape of an irregular trapezoid. If you install additional structures, the internal space can be organized quite rationally;
L-shaped . The most common option. This universal shape is suitable for any room. An L-shaped cabinet is a combination of two straight pieces of furniture joined into one piece. This option allows you to make maximum use of the internal space, filling it with various components;
five-walled . This form has small side walls that make the internal filling functional. Outside furniture can be supplemented with consoles and modules.

There are standard patterns and sizes for the manufacture of corner cabinets and non-standard ones. Standard patterns and sizes are:

if the room is large and of regular shape, a triangular model would be the ideal choice.
The length of the sides of such a product can reach 1.2 meters. If the length is about 1 meter, the furniture will turn out to be of little functionality and not roomy. And a length of about 1.5 m will make the piece of furniture too bulky. As for the minimum depth, it should be 40 cm, and the maximum - 60 cm.
The internal space of the corner product can be anything. For small models it is worth choosing an L-shaped arrangement of shelves ;
trapezoidal models fit perfectly into children's rooms, living rooms, and bedrooms. They are suitable even for small rooms where every free meter counts. The model has good capacity. The standard dimensions of a trapezoidal cabinet are: wall length - 1.2 and 0.8 m, depth 45 cm;
five-wall products can have a height of 1.8 to 2.4 m, a width of 1.2-2.1 m, a depth of 85-100 cm. Such a piece of furniture is not suitable for cramped spaces . It is better to install it in a spacious living room or bedroom.

Advice. Experts recommend making a preliminary drawing of furniture on paper before manufacturing it.
This will allow you to calculate the area of remaining free space. As for non-standard products, it is advisable to install them in small, narrow and cramped spaces. When designing a drawing of a non-standard size corner wardrobe with your own hands, it is worth considering that:

the minimum depth of the cabinet should be at least 35 cm. But the maximum permissible depth should not be more than 0.9 m;
the minimum width of a non-standard piece of furniture must be at least 0.1 m. Then the doors will have a width of 45 cm. Narrower doors will be inconvenient to use and unstable;
The height of non-standard products has no restrictions. Depending on the wishes and requirements of people, cabinets can be made as high as the ceiling. But the optimal comfortable height is 2.1 – 2.4 m.

Interior arrangement

When designing furniture, it is worth considering proper zoning of space. Namely, you will need:

shelves for things . They are the main filling element. They can be made stationary or retractable, solid, ventilated, half or full depth;
rods for shirts and other short items . Most often they are made of metal;
hooks for bags and robes;
shelves for shoes . In the upper part of the mezzanine it is convenient to store shoes in boxes;
drawers for underwear and socks;
trousers . Their trousers will always be ironed and ready to put on;
tie bar . It will make it convenient for you to select products. They will not wrinkle or lose shape;
belt hooks;
pull-out baskets for small items. All things will be visible in them. It will be convenient to store bracelets, glasses, watches in them. The inside of the basket can be divided into separate cells.

Scheme and drawing

After you have decided on the size, shape, materials and design of the cabinet, you should draw a diagram indicating all the internal compartments, drawers, and shelves.

Advice.

If you own a PC, you can make a sketch using a special program. With its help, both simple furniture elements and quite complex ones are created.

When creating a project for future furniture, it is important to consider:

product dimensions;
dimensions of the door, base and cabinet lid;
materials and dimensions of the rear part;
internal space - vertical and horizontal sections, drawers, shelves;
the presence of mezzanines;
arrangement of accessories.

Materials and tools

An important criterion in the manufacture of furniture is the choice of consumables. For the manufacture of the frame the following is used:

natural wood . Wooden products are the most durable and environmentally friendly. Such furniture will delight owners with its natural beauty, interesting texture and texture. But its cost will be quite high;
MDF . This material has good performance characteristics, durability and affordable cost. Distinctive features of MDF are its ease of use, environmental friendliness and safety, excellent decorative qualities;
Chipboard . It is distinguished by practicality, durability, reasonable cost, moisture resistance and aesthetics. Modern manufacturers provide a wide color palette of laminated chipboard. Thanks to this, stylish and original furniture pieces are obtained.

Doors can be made from:

wood;
plastic;
MDF or chipboard;
tempered glass.

Important . The durability of structures directly depends on the driving mechanisms. Therefore, special attention should be paid to the choice of fittings and guides. There is no need to skimp on these materials. It is recommended to purchase products only from well-established manufacturers.

To assemble a cabinet according to the finished project, you will need the following tools:

hammer;
screwdriver;
drill;
square;
pencil.

Also, before installation, check the availability of:

finished drawing;
furniture board;
guides and fittings;
drawers, shelves, hangers, handles;
dowels and screws;
upper and lower false panels.

Manufacturing

How to make elements?

Having in hand a project for a corner cabinet with all the calculations, you can go to a company where they will cut out the materials for you.

If you decide to make all the details yourself, you need to:

Cut out all the elements of the product from sheet material: walls, doors, shelves, drawer elements. You can make the parts using a circular saw. It is also possible to cut with a hacksaw, but in this case chips may appear on the parts.
After this, we process the edges using PVC edge tape of a matching color. Trimming of cabinet elements can be done using an iron or a hair dryer.
We apply the trim with the adhesive surface to the part and iron it with an iron or heat it with a hairdryer.
We run a soft cloth along the edge, pressing it tightly against the product.
We cut off the remaining tape with a knife.

Assembly of the structure

The corner cabinet can be built-in or cabinet. The assembly process for different structures is slightly different.

To assemble a built-in product, there is no need to install the back wall and corner ends . The product assembly process will consist of the following steps:

If necessary, we process and level the walls in the room. We paint them or cover them with wallpaper.
We drill holes in the places of future fastenings.
We connect all the parts of the body.
We check the work done using a level.
Next we move on to the internal arrangement. We mark the location of the internal shelves of drawers and sectional partitions.
We install doors.

The frame of the cabinet product is assembled according to the following principle:

We make markings at the location where the piece of furniture will be installed.
We assemble a special device from a metal strip and two pieces of board connected at an angle. You will also need 2 quick-release clamps. Using these tools, it is convenient to connect workpieces at right angles.
We check the parts with a square and measure 7 cm from the top edge.
We make marks for drilling on the upper and lower parts and drill the parts.
Using a screwdriver, tighten the confirmat.
After fixing the sidewalls, we place the location of the shelves and make holes for them. We install the crossbar and screw all the shelves.
Next, we assemble the lower part of the furniture piece.
After assembling the cabinet, a sheet of fiberboard is attached to the back of the cabinet using furniture nails.
We install the door.

Door installation

The last step in assembling a corner cabinet with your own hands is installing the doors. They should be ordered separately from a company that deals with similar systems.

Sliding systems consist of the following elements:

top guides;
lower guides;
the top of the door;
bottom of the door;
vertical stand for side parts;
sealing rubber. It not only softens the opening and closing of the structure, but also prevents dust from entering;
sets of upper and lower rollers;
brackets for securing doors.
vertical side profiles. They can be symmetrical or asymmetrical.
door filler (mirror, wood, glass). Performs a purely decorative function, adding originality to the overall interior of the room.

Important . All door components must be covered with a protective film to prevent damage and scratches during delivery.

Instructions for assembling the doors are as follows:

We place the door in a horizontal position so that it can be accessed from all sides.
In the upper part of the vertical stand we make two holes for fastening - the bottom hole will have a diameter of 6.5 mm, and the top hole will have a diameter of 10 mm.
At the bottom we attach a roller.
We insert a rubber seal into the upper part of the mirror and fix it with a profile. We lay the seal around the entire perimeter.
Next, install a vertical profile with a handle.
We join the upper profile to the cross member and tighten the screw with a hex key. The screw is not screwed in completely, since the upper rollers will be installed into it later. Only after this is the screw tightened until it stops.
Next, install the lower profile and tighten it with a hex wrench.
We put on the final vertical profile and tighten the screw with the upper roller.
We prepare everything for installing the lower roller, tighten the spring and carefully insert the roller into the drilled hole. We secure everything with a screw.
Fix the top guide. We do not screw the bottom guide.
We insert the lock for the door and set everything to the level. Only after checking that a gap of the same width is formed on the outside when the doors are closed, do we fix the lower guide with screws.

Advice. It is recommended to install clamps on sliding systems.

If you continue to plan to furnish your home yourself, we recommend that you learn how to make a built-in wardrobe in the hallway.