How to paint a kitchen set with your own hands: 6 stages of painting, photo and video examples

Many people notice that even the highest quality and most beautiful furniture loses its original appearance over time. However, completely changing kitchen furniture is not a cheap pleasure. But due to the fact that the old furniture in the kitchen is made of high-quality wood, many decide to transform the furniture. Therefore, the question arises: how to paint the countertop so that it looks like new. What paint and tools to choose to get the right result.

Construction portal No. 1

In a room like a kitchen, absolutely everything is important.
Not only comfort and convenience, but also appearance. Specially designed kitchen designs with thoughtful content and good fittings will help you achieve just this effect. As for the facades, they will provide you not only with beauty and comfort, but also with a good mood every day. For all fans of modern style, painted MDF facades are perfect for kitchen decoration. Beautiful red fronts definitely decorate the kitchen

To finish such facades, polyurethane enamel is used, which is why painted facades can also be called enameled. But the point here is not at all in the name, but precisely in the fact that such facades look not only beautiful, but also modern, irresistible and simply luxurious. Moreover, painted MDF facades combine perfectly with modern kitchen appliances.

Painting a table while maintaining the wood texture

The best result of painting while preserving the texture of the wood is obtained on an array of large-porous species, such as oak, ash, chestnut. The question immediately arises: why paint an already beautiful array. If the issue of painting is not discussed, let's move on to technology.

1. Sand the clean surface prepared for painting, first with medium and then with fine sandpaper. By hand, without the use of sanding machines, sanders and other devices. Under your fingers, the softer fibers of spring and summer wood will be sanded harder than the denser ones. Autumn/winter layers will remain slightly convex.

2. Cover with a thin layer of colorless varnish or primer by spraying.

3. Remove the raised pile with a fine abrasive or steel wool.

4. Blow the surface to be painted with a compressor to remove fine dust.

5. Cover the tabletop with a thin layer of the chosen paint.

6. Dry for at least 24 hours.

7. Finish coat with a transparent, silky matte, durable, wear-resistant varnish.

If the process of painting a table seems unnecessarily complicated or there is no time to do it, we will take on this concern with all our professionalism and knowledge of the matter. The photo shows a desk, tinted mahogany. Decorated with brass broaches, overhead handles, and bronze-colored oarlocks. The tabletop is covered with leather in a matching color with an aged effect. Aging furniture with your own hands is a tempting activity, but when it comes to expensive furniture, it is better not to experiment, but to entrust it to professionals.

Workshop gallery

Estimated cost of restoration (price as of January 9, 2019)

Restoration of paintwork

By sending us a completed form with photographs, as well as asking a question, you will receive complete information about the item (what it is, material, age) and the cost of restoration work. Next, the restorer will come to the site, inspect it, and determine the final price of the restoration.

The final price will not change. Departure is free.

Source: restavraciy.ru

Features of MDF manufacturing

The name itself tells us that painted MDF is a board made of sawdust, coated with a wide variety of paints. Let's take a closer look at what such a slab is made of, what properties the finished product has, and whether this material can be used when decorating a kitchen.

MDF has a huge advantage over chipboard (chipboard). When making chipboard, sawdust is held together with not entirely useful epoxy resins. Such resins are not involved at all in the creation of MDF. In this case, sawdust is bonded together with paraffin and lignin, as well as by pressing: at high temperatures and under strong pressure. Lignin is a special substance that is released exclusively when wood is heated. Thanks to lignin, MDF boards can be considered absolutely environmentally friendly and natural.

Unfinished MDF

You should know that in German MDF (MittelDichteFazerplatte) literally translates as “medium density board”. As for the Russian abbreviation, MDF is a finely dispersed fraction. Both of these abbreviations were equally able to reflect the unique structure of this material.

Due to its environmental friendliness, as well as its special flexibility in processing, MDF is gaining more and more popularity every day, and is already able to displace other wood materials in the markets.

Manufacturers believe that this material can even surpass natural wood in moisture resistance and mechanical characteristics.

Preparing for painting

In order for the painted countertop to please you for a long time, it is necessary to carry out all the work correctly. So, they all take place in several stages. It is impossible to exclude at least one of them, otherwise the paint will not adhere well or smudges and blisters will form.

Removing an old layer

Furniture in the kitchen is most exposed to high temperatures and water. Therefore, to prevent the surface from swelling and to last longer, manufacturers cover it with a thin layer of plastic. If you repaint the countertop without removing this layer, you may not get the best result. Paint applied to plastic will not stay on the surface for long: it will run off or roll off. To prevent this from happening, you must remove this protective coating.

This can be done using chemicals. The main thing here is to be able to choose the right product that will wash off the paint but will not damage the surface.

Or you can remove the old coating mechanically. To do this you will need to use a hair dryer. There is no need to try to soften the coating using a conventional hair dryer. Hold a hair dryer over the surface and you can scrape off the softened paint.

Before painting you need to remove the old paint layer

Sanding the surface of the tabletop

Often, to repaint a countertop, simply removing the first layer is not enough. In order for the paint to last long, it is necessary to sand the surface. The most common means available to any housewife will help in this process. This is the simplest sandpaper, spatula and putty. If you wish, you can buy a sanding machine, this will speed up the process of removing paint.

Pay attention to: Roof paint: types, methods, expert advice.

To make it easier to sand the coating, it is better to disassemble it into small parts and assemble it after painting. This will ensure that no corners are missed and the surface will be covered evenly. But if you only need to cover the top countertop, it is not practical to disassemble the entire kitchen.

First you need to sand the wooden surface. To do this, rub the wooden base with sandpaper to remove the first layer. You can also use a sanding machine, but this requires skill and dexterity so as not to damage the wood.

Then you need to degrease the surface so that the paint lays evenly. If you wish, you can buy special degreasers at hardware stores, or you can use dishwashing detergent and a sponge. After the sanded wood has been washed with a concentrated soap solution, you need to rinse the surface to prevent the appearance of streaks. And leave everything until completely dry.

Now you need to level the tree. Even after all the manipulations described above, irregularities may remain on the surface, which will become noticeable when repainting. Putty will help get rid of this . It needs to cover all cracks that have arisen and leave until completely hardened. If obvious deficiencies are still visible after this, you can repeat this procedure.

The main thing is to apply all new layers on well-dried putty.

Sanding the table top

Surface primer

The very last step in preparing for painting is priming . This is necessary so that the dye lies on a flat surface. It is not necessary to buy primers designed for wooden surfaces. You can also buy solutions for painting glass or tiles. They are easier to use.

You need to prime the table armed with gloves and a protective mask. Then you need to leave the product to dry. The time allotted for this is indicated by the manufacturer on the primer label.

Universal acrylic primer

Production of painted facades

Painted panels and facades are produced according to a specially prepared scheme:

1. First of all, the slabs are prepared. They are cut according to the specified dimensions. Then sanding, priming, and sanding again is done. The appearance and performance characteristics of facades depend on the quality of this process.
2. The next stage involves painting the MDF. The slabs are painted not in one, but in several layers. Moreover, each layer is completely dry, dried and sanded. This is done in order to achieve the effect of a glossy photo.
3. After painting, the surface of the future facade is varnished.
4. Before the work is completed, the final polishing takes place.

As you can see for yourself, the process of painting facades is not that complicated. Looking at various photos of kitchens in magazines or on the Internet, you will see that MDF facades can have absolutely any shape. Of course, in most of the photos the facades will be even and smooth, since this option is the most common.

In general, MDF is a very plastic material that lends itself perfectly to a wide variety of processing. Thanks to such remarkable characteristics, the slab can be given absolutely any shape. In the photo you can see the convex and concave shape of the slab. In addition, you can also do embossing, milling, and also round the edges.

Furniture with bent MDF

During the last, final painting, polyurethane enamel is applied to the MDF board. It is capable of creating a real protective field for the material, filling all the edges, recesses and other volumetric details on the facade. Modern designers use the features of this decorative coating, bringing their wildest ideas and fantasies to life.

Finishing

After painting is complete, the tabletop acquires a matte finish. To restore the original glossy shine, it is recommended to apply a water-soluble varnish to the surface after completing the procedure. This material will increase resistance to mechanical stress.

Instead of water-soluble varnish, you can use an auto polish with fine abrasiveness. This material does not spread after application and is able to hide minor defects. Before purchasing finishing compounds, it is recommended to check the compatibility of the selected mixture with the paint. Some products cannot be used together.

What could be the decor of facades?

Material such as MDF is quite expensive. It is not only high quality and highly durable, but also very environmentally friendly.

Moreover, it should be borne in mind that MDF boards can be given absolutely any color and shade, and this, in turn, means that furniture made from painted MDF can be matched to absolutely any style.

Don't forget about special paints with special effects. You could see them in photos in magazines more than once.

When choosing facades for the kitchen, the customer can give his preference to any shade and make his kitchen either monochromatic or multi-character, choosing different colors for the facades of floor and wall cabinets, but combined in one color scheme. Let's look at the most interesting special effects that facades can have:

The most popular of them is called “chameleon”. Kitchen fronts made with this effect will never be monochromatic or monochromatic. They will constantly change their color depending on the viewing angle and lighting.

A kitchen with a special “chameleon” effect changes its color

For classic kitchens, facades with a “crackle” effect, which is also called “patination,” are often chosen. This interesting coating helps give the kitchen façade an aged effect. Crackles are small cracks that give modern furniture a classic, aged appearance. You can see options for such kitchens in photos in magazines or on the Internet.

Tools and materials

Before painting, the wooden surface should be cleaned of old coatings and defects should be removed. For this you will need:

• putty;
• putty knife;
• grinding machine or wooden block;
• sandpaper;
• brushes and roller;
• gloves;
• paint tray;
• protective glasses.

Painting the table is done if it is made of cheap wood, such as pine. It is not recommended to paint oak furniture - it will lose its decorative appeal and its value will decrease.

For painting work you will need:

1. roller, brushes;
2. dye;
3. paint tray;
4. masking tape;
5. gloves.

How to determine the quality of MDF

Undoubtedly, MDF has both pros and cons, but before we move on to listing them, we should pay a few words to the quality of this material. The higher quality the material, the longer MDF kitchen furniture can serve you. Determining quality yourself is quite simple. You just need to pay close attention to the samples offered to you.

To determine the quality, you need to bring the element offered to you to your eyes so that it is between the light source (preferably artificial) and you. The end of the copy offered to you should be exactly at your eye level. Good lighting will help you identify any existing defects. These may be bubbles, punctures, dents, craters, roughness, etc.

MDF in cross section must be of high quality and without flaws

The surface of a good, high-quality material should ideally be smooth, without the slightest flaws. Defects can only be at the ends and then in small quantities. If you find any defect on the front side, we advise you to refuse to purchase such furniture, as it is not of high quality. The quality of the purchased material must be checked before placing an order.

Reviews from other customers about the company you are working with will help you decide whether to order from them. It should be remembered that low-quality products fail much faster.

We've sorted things out a bit with quality. Now let's look at what are the pros and cons of painted facades:

1. First of all, it is clean and environmentally friendly! MDF will not emit any harmful substances even after many years of use.
2. This material has excellent resistance to mold, as well as various microorganisms and fungi. It will be much easier for you to keep your kitchen space clean.
3. Painted facades are very easy to care for. The surface of the facades does not absorb dirt, vapors, gases and dyes. Smooth enamel is easy to wash and clean. It is quite resistant to various detergents.
4. Minor defects that arise after some time of use can be easily eliminated.
5. Also an undoubted advantage is the widest range of colors and a huge variety of decors for kitchen furniture. Selection and ordering is possible from the photo catalogue.

Now, as for the cons:

1. Painted facades can fade when exposed to direct sunlight.
2. Enameled surfaces are susceptible to mechanical damage. You need to be very careful with them. If handled incorrectly or simply carelessly, you can damage the enamel layer, which cannot be replaced or repaired, and only your photos will remind you of the former beauty of your facade.
3. The most significant drawback for many buyers is the high cost.

As you can see for yourself, this material has much fewer disadvantages than advantages, so we can say with confidence that painted facades have many more advantages than disadvantages. If you treat your furniture with care and attention, imperfections may not appear at all. We hope that our article will help you choose good and high-quality MDF furniture with magnificent painted facades for your kitchen.

Work order:

At first I wanted to paint it like this without removing the door, then I realized that it would be inconvenient. So I took a risk. and took it off. It turned out not to be difficult. True, worries about how to put them back on were present until the last moment. In the end, I also screwed it myself; I didn’t have the patience to wait for my husband))).

I pulled out the built-in lights and wrapped them in a suspended state with masking tape. The same tape was used to protect the walls on the sides of the cabinet, the floor, and the mirrors on the doors. Prepared the workplace. I decided to paint it. on the bed)))! I covered it carefully with polyethylene. And I have never regretted this choice. The bed was large and high, everything fit, there was no need to bend over and crawl on all fours. I prepared approximately equal stacks of books and wrapped them in cling film. They are needed as substrates so that the doors can be lifted and painted as if suspended; the painted edges will not come into contact with a flat surface.

Stage 2.

I sanded all surfaces that needed to be painted. It is necessary to sand lightly, without fanaticism, with the finest sandpaper. Light circular movements. Purpose: to create roughness without removing the laminated layer. If there are dents and scratches, they should be filled with putty at this stage. After sanding, thoroughly wipe all surfaces with degreaser. It will remove dirt, grease marks, and everything that can disrupt the adhesion of the primer and paint.

Stage 3.

Primer. I went through hard-to-reach places with a brush, and the rest with a roller. A thick layer is absolutely not necessary; it must be covered with primer without drips and in a thin layer. Uneven coloring is not a problem, but there should be no gaps. I didn’t prime the rattan inserts; the paint applied well to them anyway.

They are easy to paint - just roll them with a roller; with a brush it is more difficult not to go beyond the edges. Wipe off any blemishes immediately with a cloth. Each layer was dried as recommended by the manufacturer; the acrylic dries “touch” in an hour and, in principle, you can carefully turn the door over and paint the other side.

Stage 5.

I assembled the closet. I screwed the doors and handles. I removed the masking tape and cleaned everything up. At first I planned to keep the doors open for two days, I was afraid that they would stick. Nothing like that - you can close it right away.

Dresser.

Mirror.

Important!

Acrylic paints dry quite quickly “touch-free”, but polymerize for at least a month; with a primer the process can take even longer. The painted product can be used almost immediately (or it’s better to wait 2 days) and even wiped with a damp cloth. But within a month, the coating remains very vulnerable; it must be handled carefully, not scratched or rubbed with force. If shelves or horizontal surfaces are painted, then it is better not to immediately place things on them that could “stick”, wait until the paint “sets”. Although I immediately put everything I needed on the chest of drawers, nothing stuck).

Here you go. The work is labor-intensive, but I was pleased with the result. The paint job ends up looking no worse than the factory paint, no brush marks are visible. It holds up well too. I haven’t tried scratching, I use the furniture as usual. But usually I don’t scratch it))). Although I will conduct an experiment in a month. The room has been pretty updated). Alas, the photos after compression leave much to be desired; in fact, the colors are brighter and cleaner, but this is not so important.

If you also want to redo furniture and have questions, write to me and I will answer. And if such a rework seems complicated to someone, I assure you that it is not, labor-intensive - yes, but quite doable without any experience. You can just start with internal, unnoticeable parts, or with small furniture, a chair, for example. The rework took three days. At the same time, I managed to cook and... suffer from bronchitis + my leg is still slightly lame after the cast. The “disabled painter” was able to paint, which means you can too))).

How to update your kitchen countertops with your own hands?

Kitchen countertops made of any materials sooner or later lose their presentability and need updating. If you can’t afford a new set, you can restore the work surface.

In our article you will learn how to update an old countertop in the kitchen with your own hands, how to completely change its appearance without turning to specialists.

Painting a stone surface with two-component paint

There are several options for stone paint, and one of the most popular is two-component paint. It is intended for decorating wood, plastic, ceramic tiles, old surfaces made of artificial and natural stone.

As a result of this coloring, we obtain a seamless surface that can change the appearance of the kitchen. There are different colors, it’s not difficult to choose, but first experiment on a sheet of thick paper or plywood - it’s important that the second coating is even if you don’t want to get gaps.

The first layer (base) is applied with a brush/roller. Then we wait 4-5 hours for the layer to dry.

the second layer with a piece of foam rubber, working out the desired “stone” texture.

The painted surface dries in about 8 hours, but in the first two weeks after its renewal you should not lay or install heavy objects on it.

Types of countertops and their defects

Working surfaces are made from different materials:

Sanding the surface of the tabletop

Always sand any surface before painting. So, firstly, your work will look neater. Secondly, it will give you the best result. Use fine-grit (200 to 220 grit) sandpaper to remove any roughness on the work surface and back wall. An electric sander will do this job much faster. But if you simply don’t have one, and your budget does not allow you to purchase such a tool, then you will have to use regular sandpaper. But then you will have to be patient and time.

Use a sanding block to sand the edges of the tabletop, as you simply cannot do this with a machine.

How to update an old countertop made of natural and artificial stones?

The optimal method of restoration is polishing and grinding, because the tabletops have an identical texture throughout their entire thickness. Care must be taken with cast stone applied to the base in a thin layer; it will only withstand 2-3 polishing updates. In the future, it is optimal to improve it in the same way as wood or plastic - by gluing, painting, glazing. The same methods can be used to transform a stone if the set has already become boring.

Before you get tired of the set, scuffs and scratches form on the stone surface, it’s time to sand and polish it. Required tools:

• Sander.
• Polishing machine.
• Polishing paste.

The device for grinding and polishing can be one with different attachments: for the first stage abrasive P120, for the second - up to P1500.

You can update your kitchen table top with your own hands by following these steps:

1. Adding water to the surface to reduce the heating of the stone, sand the countertop, leveling the top layer.
2. Using polishing attachments from coarse to fine, process the surface to a matte, semi-matte or glossy texture using polishing paste.

Important . Neither the polishing nor the grinding wheel should be dry, they must be moistened.

Necessary tools for varnishing tabletops

Before varnishing the tabletop, you need to take care of a sufficient number of necessary tools for the job. To create the deepest possible color of natural wood, you can use stain - the day before varnishing, the tabletop is painted with a small sponge. To work with the prepared tree you will need:

• brush or roller;
• cotton pads;
• additional lamp;
• fine sandpaper with fine grain.

The varnish is applied with a roller or brush with natural bristles Source privatmebel.ru
The main tool for application will be a brush or roller. In the first case, it is recommended to use a tool with dense natural bristles. The roller should be made of microfiber or fabric with a minimum amount of lint. Cotton pads are used to wipe off fallen drops of varnish from non-working surfaces.

How to update a kitchen countertop: radical methods

How to update a kitchen countertop with your own hands if its old appearance is no longer satisfactory? There are several options.

Pasting

The easiest way to transform your work surface. What to cover the tabletop with? To do this, you will need a thick vinyl film with a self-adhesive backing; photo wallpaper is also suitable.

1. The surface of the tabletop must first be degreased and sanded for leveling. Important . If there are potholes or chips on the surface, they must be filled with repair putty.
2. Paste the film. It is important to fix one side correctly so that when rolling, the canvas moves parallel to the edge of the table. During the pasting process, you need to help with a plastic or rubber spatula to force out bubbles and smooth out the coating.

The service life of the film is 3-4 years with careful use.

Painting and glazing

The second easiest way to solve the problem is to update the countertop. Suitable for any type of surface that must first be puttied or sanded for leveling.

How to paint a kitchen countertop:

• Acrylic paint.
• Alkyd enamel.
• Water-based paint.

The coloring composition should be applied to a degreased surface in 2 layers. You can use your imagination and draw something on the tabletop. For those who don’t know how to draw, you can use ready-made templates.

It is advisable to protect the finished coating with tempered glass. It will prevent small chips of paint from getting into food and preserve the color coating from abrasion. Glass can also be used for pasting.

Decoupage under glass

A creative way to update your kitchen table top with your own hands is the decoupage technique. It is characterized by freedom of creativity - you can use any applications, ready-made or homemade, sparkles, memorial cards, etc. They must be glued to a previously degreased surface using PVA, and after drying, covered with 3-4 layers of furniture varnish or glass.

Major update

How to radically update your countertop:

• Cover with tiles.
• Apply mosaic.
• Make a composition with stones, shells and other three-dimensional decor in transparent or colored epoxy resin.

How to update a countertop with your own hands depends mainly on the budget, imagination and capabilities of the kitchen owners. You can use any available restoration and transformation techniques.

How to paint a table?

Hi all ! Today we will talk about how and what to paint the table with? Which paints should be used in this or that case...

One of the comments asked:

a wooden table and legs for it from OBI I have to bring this matter to its final conclusion. And if I can somehow imagine how to make a beautiful edge using Fraser and assemble everything, then the painting and sanding stage is not very good yet. You have all the tools, including a compressor and a paint gun, but what materials are needed for puttying and priming the varnish? In what order should the work be carried out?

To begin with, let’s imagine a table bought in OBI , unfortunately there is no photo, so we’ll fantasize, I think the table is also a table in Africa, only the African one is let’s say it’s simple - legs and tabletop... Let’s look at the mechanics of painting itself (which side to start painting on, etc...) later, but now we’ll describe what materials can be used for painting ...

Which paints to choose for painting a table?

1. Stain for adding color... you can read about stains by following this link

2. Soil. Let's say the most common polyurethane primer in carpentry today. I won’t describe all its advantages as in the booklet. they are different for everyone.

If you want a closed-cell finish, then use a primer with maximum solids.

If you want an open-pore finish, use a primer with good fluidity and not a large dry residue.

I always say... if you want to know what a paint coating is, work with it, but if you want to know how to work with it, read the Technical Specification! which you need to take when purchasing this or that coating. Here's an example of a technical specification:

I outlined the specification in more detail in the previous article, you can read it by following this link

3. The varnish must be chosen, understanding that the surface of the table is constantly exposed to aggressive influences (with the exception of tables that serve as decoration, on which a vase with artificial flowers is placed and wiped with a cloth every three days to remove dust), I am talking about tables such as a dining table or a desk, on which some kind of movement constantly occurs... we put a plate and scratch it, pour tea and heat it up, knives, forks and so on, I think it’s clear here.

The table needs a strong varnish ! A special varnish for countertops, parquet, or regular varnish, but with additives to enhance the strength... More often in the characteristics of paints and varnishes they write “resistant to abrasion, scratches, for countertops” See the technical specifications for the material!

Which paint manufacturers are better? I can only recommend manufacturers that I like, mostly Italians; I already gave an example of manufacturers in one of the articles:

Saerlak, Rener, Milesi, Iksam, Sirka, Herberts, Zobel... listed in priority (in my opinion) order

They once asked me, Vasya, why do you keep recommending Italians, and the same ones? as if there are no other paint manufacturers...

There are a lot of manufacturers, but in the production where I usually work, people taught by experience try not to experiment with new coatings, the result (quality) without delays (production) is important, so it seems that you can paint 500 meters of skirting boards with Marshal or Tikurila parquet varnish, but it is most convenient to purchase coatings where they provide high-quality material (tailored specifically for this type of product), a loyal policy of working with the client and full service (all paints and varnishes for furniture)…

A lover of Italian paints, you might say! I’ll answer well... and okay, but if you like Yaroslavl paints, I will always respect your choice...

So let’s summarize what I wrote:

In order to paint the table you need to choose a paint brush.

Stain - which one do you like best?

soil - open-closed pores (dry residue)

varnish - resistant to abrasion, scratches and heat.

What to putty on before painting?

You can purchase a wax kit for restoration

and seal chips and cracks with wax...

I’ll collect more material and write an article on how to work with wax...

Or wood putty, for some reason I always liked this

We choose the color of the wood from which the product is made and off we go...

I would like to draw your attention to the fact that you can putty both before applying primer on wood and on dried primer.

In what order should I paint?

First, I propose a standard scheme:

№1

1. Stain "on living" wood
2. Soil/drying
3. Grinding
4. Varnish

I think this scheme is the most correct.

№2

1. Soil/drying
2. Grinding
3. Stain/spray
4. Varnish

Not the best way to finish a table, the downside is that if the varnished surface is damaged, the stain, which is the next layer after the varnish, is also scratched off along with the varnish. Scratches like light stripes...

№3

1. Soil/drying
2. Grinding
3. Varnish with stain

The same disadvantages as in the previous version...

In the article “Furniture facades” I described methods for applying stain and eliminating unpainted stains on facades.

How to paint a table?

Here I’ll tell you how I usually paint the table, that is, where I start, how I hold the gun...

Let me give you an example of a pine table.

The legs are tinted with Saerlak XM8000 stain and finished with water-based varnish from the same manufacturer. (well, that’s what the customer wanted, in order to save money)

The tabletop is tinted with the same stain. Polyurethane primer. Polyurethane parquet varnish.

Let's get started:

First we blow it, paying special attention to the corners where wood dust most often accumulates.

We charge the finished stain into the spray gun.

Where to start?

Let's imagine the process in the form of a diagram:

that is, we determine one starting point and begin to paint, going around the table in a circle, respectively ending at the initial starting point... It can be any, I always act on the principle of painting what I see - this is when unpainted parts of the table come across my eyes ( table legs) I paint them, trying to follow a circular pattern...

In general, I walk around the table and without stopping, I paint what comes across during my movement... I hope I was able to convey my thoughts

Stain concentrate weaker air pressure less

Then I change the position of the torch:

and everything like that in a circle, not forgetting to constantly change the position of the torch by turning the nozzle or tilting the brush...

The same applies to varnish, in this case water-based. By the way, please note that when applied, this water-based varnish becomes cloudy, whitish... DON'T BE AFRAID! this is normal... when dry it will become transparent...

Painting the tabletop:

First from the non-front side...

Then color/primer:

After drying, sanding and varnish... The finish of the tabletop is the same as on any horizontal surfaces...

Summarize :

How to paint a table? Like any product, before painting you need to decide on the material (coatings), characteristics, etc.

Determine the finishing sequence

Paint according to the principle “what I see, following a circular pattern” (IMHO)

How to repaint old chipboard furniture with your own hands

Modern interior items very quickly go out of fashion or lose their attractiveness, but purchasing new ones is not always possible. This raises the question: how to repaint chipboard furniture with your own hands so that the product acquires an attractive appearance? This is not always easy to do, because the result is influenced not only by the correct choice of materials and technology, but also by the accuracy of the process.

Achieving a stone effect using a glaze additive

A beautiful “stone” surface can be obtained by covering a layer of paint with glisal (glaze). This method is also called glazing. Glizal is a translucent layer that provokes a shimmer of color. To make the tabletop material look like stone, it is advisable to make the appropriate texture.

1. Having prepared the surface, paint it with base paint.
2. Immediately apply a film to the paint, carefully stroke it with your palm and fingers, making small waves, lines, etc. Remove the film and wait for the surface to dry.
3. Apply a layer of glaze. Waiting for it to dry.

Having chosen the appropriate method, you can paint not only the tabletop, but also other furniture, kitchen apron, window sills, doors, etc. as stone.

Source: www.domstoy.ru

The nuances of repainting furniture chipboard

Painting old furniture with your own hands is considered a difficult and risky procedure. The fact is that for the manufacture of interior items (cabinets, chests of drawers, kitchen modules) processed materials with a decorative layer are used. Therefore, it is necessary to correctly determine the type of coating in order to draw up a work plan.

Chipboards used in furniture production can be of the following types:

Lacquered. Wardrobes, beds and dressing tables made more than 30 years ago are made from this material. Now this furniture is being produced again. The manufacturing technology is that several layers of varnish are applied to the decorative base. Parts processed in this way are used for facades or visible parts of the body. It is very difficult to repaint varnished products; it is much easier to polish if there is damage.

There are other types of slabs, but they are not as common.

How to use paint and a bag to turn a wooden countertop into a stylish “granite” one

Receive one of the most read articles by email once a day. Join us on Facebook and VKontakte.

Since every person spends most of the time in the kitchen, it is the kitchen that you want to put in order first. This is especially true for the work surface, which is daily exposed to the negative effects of water and detergents. Replacing furniture is a rather expensive undertaking, so it’s worth paying attention to a radical transformation with minimal investment, as the creative housewife did.

Even if you don’t save on buying a kitchen set, over time it still loses its attractiveness. This is especially true for countertops made of natural wood, because constant contact with aggressive detergents and moisture has a detrimental effect on the material. And if this happens, the working surface takes on a completely unaesthetic appearance and becomes a real breeding ground for germs and bacteria.

A creative housewife found herself in such a situation and decided to experiment. In order not to change high-quality wooden furniture and not to buy a new surface (more than one!), it was decided to radically change the appearance of the set using acrylic paint, a plastic bag and a few additional materials. Before converting the countertops, the cabinet fronts were painted white. Naturally, the woman needed help in some aspects, but basically anyone can handle such creative work.

Before starting work, you should purchase the necessary materials and tools and only then begin preparatory activities. If you need to change the sink or any other equipment, it is better to do this in advance, especially since the most damaged areas appear around such places. Before installing a new sink, it is advisable to thoroughly treat all problem areas.

After installation work, you need to thoroughly wash the working surfaces and putty all problem areas. After the composition has dried, sand the countertops and thoroughly degrease again. Now you can start applying the primer paint. To make the surface more uniform, it is advisable to apply the primer in two layers. After this, the countertops need to be carefully painted with a base color, on which the “granite” pattern will be created.

Important: Each layer must dry thoroughly.

Since the housewife wanted to get a “granite” countertop, she purchased several different tones of gray and brown pigment in advance, and in order to get reddish inclusions, glue and mica of different tones. To create a waterproof film and glossy finish you will need: polyurethane coating and varnish.

Advice from the authors of Novate.Ru: If an amateur decides to take up such creativity, then before starting painting it is better to search on the Internet for a drawing that you would like to get as a result. Carefully consider what shades of paint you need to purchase. As a rule, to imitate granite you need to have from 3 to 9 colors, which are applied one by one, starting with the darkest.

In order to get a deep “natural” tone, you need to roll a soft plastic bag (a T-shirt is better) into a loose ball, carefully dip it into the darkest paint, remove excess material and randomly apply it to the surface of the tabletop. Before applying a lighter tone, the previous layer of paint should be allowed to dry thoroughly so as not to strip the material.

The granite is patterned in this sequence until a deep and natural look can be created. If during application you get rough transitions, use the same bag (you can take a sponge) to shade them with a light touch so that the edges are blurred. All these manipulations must be done until the paint layer begins to dry, otherwise the already created pattern will be damaged.

To obtain special shimmer, it was decided to use mica flakes. To do this, glue was applied to the dried layer of the formed pattern and small scales of different colors were distributed in small batches. After this, the mica must be pressed to the surface with a brush so that hills do not form. Brown pigment was applied in the same way, which added naturalness to the “granite” countertops.

Tip: The veins that are always present in natural materials look quite original. To imitate them, you need to mix the darkest paint with glaze in a ratio of 1:4. Use the resulting composition to paint veins on a fully painted surface using a brush with a long, sharp tip. The lines need to be drawn uneven and intermittent to make it look more natural. After complete drying, using the same principle, you can make white or the lightest veins from the selected color palette.

If the imitation granite is completely satisfactory and nothing needs to be changed, then all this beauty is generously filled with a polyurethane coating, which will protect the paint and wood from the harmful effects of moisture. This layer needs to be leveled, dried, and then covered with varnish in two or three layers.

When the varnish coating has dried, you can use the updated work surface, which will please the eye for several years to come. Using this imitation technique, you can create “granite” walls and even floors - the main thing is to properly cover it with a polyurethane coating and varnish so that the work done is not in vain.

For active and creative owners, it will not be difficult to transform even the most “ruined” living space without spending fabulous money on a team of builders and design projects. If you urgently need to make repairs, but don’t know where to start, you should pay attention to inspiring examples of transforming dilapidated buildings into a cozy living space.

Did you like the article? Then support us, click

:

Source: novate.ru

How to paint old furniture

To paint boring or defective interior items, you need to select a composition suitable for these purposes. The main recommendation when choosing is to refuse cheap options.

Paint for chipboard furniture should be selected taking into account the characteristics of the composition:

1. Oily. Preference should be given to well-known brands. A significant disadvantage is the unpleasant and toxic fumes, and the drying period of the solution is quite long. This mixture must be laid in thin layers, which is why the material is used infrequently.
2. Acrylic. A modern version of water-dispersed paints. The composition has many positive qualities, which makes it in demand. But when working with laminated chipboard, it is necessary to purchase a solution with increased adhesion and not dilute it with water.
3. Alkyd. This option is much preferable to the oil option. The product is suitable for painting furniture, but the work is carried out in well-ventilated areas due to the specific smell of the composition.

When restoring old furniture, you can get by with affordable tools

Brushes are rarely used for this process; their main purpose is decoration. They allow you to create an antique effect, but if a base layer was previously applied to hide the base.

On a note! When repainting an old table or chest of drawers, the joining of parts is taken into account: the new layer should not lead to the appearance of distortions and protruding areas.

Preparing the base

Step-by-step preparation instructions:

1. Furniture is disassembled or only parts that need to be repainted are removed. It is problematic to carry out high-quality painting of parts without removing them. If you have no assembly experience, it is better to number the elements on the reverse side and draw up a diagram.
2. The fittings are carefully removed, even if they are not located on the side to be painted. Its elements will complicate the process.
3. The work site is prepared, everything unnecessary is removed.

All details are processed in this way.

Repainting

Coating of fragments with paint is carried out according to the scheme:

1. A primer is applied to the element. It is recommended to perform at least two treatments, each time waiting until the product is completely dry.
2. The coloring composition is being prepared. It is stirred well and tinted if necessary.
3. The mixture is poured into a convenient roller container. The instrument is soaked in the solution and the excess is squeezed out.
4. Painting starts from the middle. The mixture rolls out well over the base, the movements should be parallel, and a thick layer should not be allowed to be created. The first layer is the base; you need to wait until it dries completely.
5. Then the main coating is applied according to the previous principle.
6. When using a spray gun, you will need to dilute the composition used. To select the optimal distance, training staining is carried out.

• Paint the countertop or dresser fronts white and other front parts black. For this, paint with a glossy finish is used. The technology is completely the same as described above, but the difference is that three layers of varnish are applied to the parts. The first layer is left untreated, and subsequent layers are sanded and polished.

Painting process

Before you start painting, you need to remove all the handles from the tabletop . If this is not possible, then you can wrap them in a layer of durable film to protect them from the ingress of dyes.

Pay attention to: Primer for wood for painting: description, types, application

Now you need to choose the right roller for painting work. Here it is better to choose a tool made of foam rubber rather than velor. This way there will be no unpleasant streaks or grooves on the painted surface.

If the furniture is not disassembled before painting, hard-to-reach places should be painted with a brush dipped in the prepared solution. You need to choose not the cheapest models, otherwise lint will come out of them, which means it will remain on the painted surface.

The time allotted for painting depends on what paint is chosen, as well as how many layers it is applied in. The drying time of the dye can be found by looking at the label; manufacturers indicate everything in detail. If for effective painting you need to repeat the procedure, then this should be done only after the previous layer has completely dried. Otherwise, the product will be damaged, and the entire process of removal, preparation and painting will need to start all over again.

Tabletop painting process