How to make a niche for curtains from plasterboard on the ceiling with your own hands: dimensions, photos, video

Often the appearance of a room depends on seemingly insignificant details. For example, the appearance of a room can be spoiled by an incorrectly selected massive cornice structure for curtains, which does not correspond to the direction of the interior. Modern designers have figured out how to correct the situation, where a niche for curtains in a suspended ceiling will help hide both the baguette and the top of the curtains with drapery tape.

The niche hides the top of the curtains with drapery tape

Preparing the ceiling for a hidden cornice

Before any cladding, the surface must be prepared.
Neglecting this stage will lead to the appearance of the design looking ugly, defects will become more noticeable, and the service life of the materials will be shortened. Therefore, some measures need to be taken. They start by eliminating the previous design. The paint can be removed using a special compound or mechanically; just soak the wallpaper. Whitewash should also be treated with water. Defects, gaps and cracks are sealed with special compounds, such as putty or plaster.

If you do not plan to stretch the fabric or install a suspended ceiling in the area of the box, it is recommended to putty this free space and cover it with white paint. You can come up with a more interesting design, but this is a basic treatment that is best not to be neglected. This will allow the pocket to look more aesthetically pleasing and fit harmoniously into the design.

@passaz-okna.ru

DIY installation

It should be recalled once again that installing such a structure is a very responsible matter, not quick and requiring maximum care. But if you decide to install it yourself, it is recommended that you carefully read the instructions for attaching ceiling models to a suspended ceiling.

Installation of an open cornice

To fasten the curtains using this method, you will need a wooden beam and protective rings. The crossbar must be strong in order to withstand the weight of the structure and the proposed curtains. The thickness of the beam is selected so that its lower surface is practically in contact with the ceiling panel; the length should be equal to the length of the cornice.

Work order:

Treat the beam so that there are no rough spots left on it that could damage the tension fabric. Walk over the surface of the flat block with a special antiseptic solution (to prevent the appearance of mold).
Decide on the location of the structure and apply appropriate markings to the ceiling.
Attach the fixing body of the stretch ceiling to the walls.
Drill holes in the main ceiling, hammer in dowels and use self-tapping screws to pull the beam to the ceiling according to the previously applied markings.
Stretch the ceiling sheet with pre-glued protective polymer rings and holes burned into them.
Carefully attach the ceiling profile with self-tapping screws to the beam through the holes in the canvas, being careful not to damage it.

When the work is done correctly, the embedded beam should not be visible.

Installation of a hidden cornice

This installation method is somewhat more complicated than the previous one, since it will require the formation of a niche that will hide the holding structure. It is necessary to correctly calculate its width in order to avoid problems with the movement of curtains. As a rule, the standard length of a niche is from one wall to another. The exception is rooms with complex window configurations.

To make a niche you will need a wooden beam. It must be processed in the same way as for the open type of installation. It is recommended to cover the corners and edges of the structure with masking tape or grind and sand it to avoid damage to the canvas during installation.

Work order:

Mount the curtain on a concrete ceiling using dowels and self-tapping screws.
Attach a wooden block using an aluminum profile to the ceiling at a distance of 2–3 mm from the curtain.
To install a bay window cornice, you will need several small bars attached to the ceiling, on which the solid niche strips will be fixed.
Secure the fixing body of the tension fabric on the curtain side so that the bar is not visible.

You should pay attention to the gap between the window and the niche beam - it should not be too large, but, at the same time, sufficient for the unhindered movement of the curtains

With this installation method, it is better to purchase the cornice before the final measurements of the tension fabric, since the size of the future ceiling depends on the design of the curtain.

conclusions

Stretch ceilings can now be made even in the most daring version. The presence of all kinds of devices and accessories allows you to create the most intricate types of ceiling designs, one of which is curtains flowing from above. The niche needed to install hidden cornices is quite simple to make. The main thing is to comply with the necessary conditions and technology requirements. Finally, remember the following main aspects that you may need in your work:

A niche in suspended ceilings is made only when installing hidden cornices
Acceptable parameters for the excavation depth are minimum 4 cm, maximum 25-30 cm.
The maximum permissible parameters for the width of the recess in suspended ceilings are 10-25 cm.
The niche can have a simple shape and design or be made to suit the complex configuration of the ceiling part
Marking and installation of fastening devices is carried out before the start of the main work on stretching the fabric

Adviсe

When creating a niche, you can make it more attractive by following some tips.

Curtains illuminated with LED strip look unique. Using a special remote control, the lighting changes color, creating an emotional mood for each individual moment.
A niche looks more impressive if it is assembled along the entire wall. But if you select only the window, you can save on building materials.
The opening for curtains does not have to be an invisible gap in the ceiling; it itself can be a decorative element of the interior. It is highlighted with color, lined with mirrors, decorated with moldings and a wide ceiling molding.
You cannot make mistakes when calculating a niche; a niche that is too narrow can squeeze and deform the line of curtains, and a wide one can create a hole in the ceiling space.
Rooms separated by ceiling openings for curtains can be zoned not only with soft curtains; The best division of space is Japanese curtains.

Ceiling niches in the interior

The ceiling is an important part of the living space. Therefore, design is of great importance, both for the safety of residents and for the aesthetic appearance. The combination or contrast with the floor and walls can give the room a completely different look. Previously, when renovating an apartment, the ceiling was covered with wallpaper for beauty and laid out with calm tiles. The easiest way is to whitewash the ceiling, but it won’t look particularly beautiful. You can diversify your interior design using ceiling niches. They can be made not only on a regular ceiling, but also on a stretch ceiling. You can also attach curtains to the niche and highlight it. Thus, you can diversify the ceiling niche in any way you like.

In the photo: Curtains coming down from a niche in the ceiling

Innovative solution

Another way to create a hidden cornice is a new system of cornices built directly into the ceiling. Today, design solutions require minimalism and simplicity, both during installation and in appearance. Therefore, KRAAB-SYSTEMS successfully implements these requirements.

@kraab-systems.com

The company implements most solutions using a damper, gapless system, which visually makes the structure more aesthetically pleasing and makes installation more convenient. It is worth paying special attention to the fact that such a cornice system is an innovative solution in the field of suspended ceilings: thanks to it, it became possible to embed a cornice in the ceiling without the use of additional profile and installation of niches. Among other things, the cornice can be supplemented with an electric drive and the movement of the curtains can be controlled using a key, remote control or smartphone, since the “smart home” system is now gaining popularity all over the world and is becoming an indispensable attribute in every room

Paying attention to the design, it is worth noting that the engine itself is hidden behind the curtain and does not spoil the appearance of the structure, and the silent mechanism does not irritate or interfere. Another absolute advantage is that the engines are selected according to the client’s needs. If we talk about appearance, the cornice looks like a thin strip of black or white. But when choosing a cornice, a person is often faced with the question of the number of cornice lines. The classic quantity is three lines: for thick curtains, for tulle and for lambrequins. If we return, again, to minimalism and practicality, then the optimal solution today is a one-line solution - for blackout curtains.

Exclusive design options

Installing a niche in a
bay window Niches for curtains are often installed in attic rooms, in the sloping part of the room, for which installing baguettes in the traditional way is not suitable.

If you have free funds, you can illuminate the structure from the inside and outside in an original way. This technique focuses attention on the window area and allows you to use the window sill separately. For example, as a desk or a place for reading.

Design solution for illuminating the box above the bed

Very often in interior design, a hidden box is placed above the bed, creating a kind of canopy. The appearance of the room becomes more cozy and aesthetic, and the lighting mounted in the niche adds romance to the room.

Ceiling cornice in the interior: types, tips for choosing.

How to choose the right one

The choice of cornice is largely determined by the size of the room in which it is planned to be located. For small apartments, it is best to purchase plastic or aluminum cornices, and for a spacious country house, you can buy classic wooden models. The cornice should be selected according to the style of the room. Thus, heavy, massive wooden classics will not fit in with the modern minimalist trend.

In addition, when choosing a cornice with the simultaneous installation of a suspended ceiling, you should take into account the height of the walls of the room - the method of installation of the structure depends on this. With a low ceiling, it is not recommended to install a hidden curtain mechanism, since it is mounted to the ceiling in such a way that it “takes away” extra centimeters. The overall price of the product depends on the installation method - installing a structure without a niche, directly on the ceiling, is much simpler and, accordingly, cheaper.

Ceiling cornices can be either with rounded edges or with “cut off” edges. The second option is only suitable for installation from one wall to another, while the first can be of any length, at the discretion of the home owner.

When choosing a design, you need to decide whether it will perform only a practical function or whether it will become the main accent element of the interior that attracts attention. The installation method, as well as the harmonious combination with the overall design of the room, depends on this.

Often, curtains are complemented with separate baguettes or built-in blend strips for decorative purposes. Such models also look good on low ceilings; there is no visual reduction in the volume of the room.

Ceiling structures are installed not only on window openings - they can also be used as a dividing curtain in a room. It is better to install partition curtains in a suspended ceiling in a hidden way, hiding the fasteners of the structure behind the canvas. Decorative models in this case will be inappropriate.

How to calculate length

The length of the cornice largely depends on the chosen model: the bus profile is usually purchased for the entire length of the wall, structures with rounded edges can only cover the window opening.

In a modern interior, both options are used; which one to choose - you need to decide for yourself, based on the stylistic features of the room and the shape of the window openings.

For the classic arrangement, which involves covering the window directly with curtains, the length of the cornice is calculated simply: you need to measure the height of the window opening and add 35–40 cm to it. Thus, the suspended profile will be 15–20 cm longer than the window itself on both sides.

Marking

At the initial stage, markings are made:

The distance from the box to the most prominent element of the window opening should be at least 16 cm. It is laid on both walls and connected by a line on the ceiling. This line will be the boundary of the niche. It is convenient to use painting thread for drawing.
Parallel to the line, draw another one, which is the inner boundary of the box. The width between them corresponds to the width of the structure.
Verticals are lowered on the walls, limiting the height of the frame.

USEFUL INFORMATION: Using moisture-resistant drywall in the bathroom

The following diagram shows a variant of a niche, which is provided in the design of a suspended ceiling.

How to attach?

If you are not confident in your abilities or do not want to waste extra time, it is better to turn to specialists. They will help you select the necessary materials, advise you in accordance with the characteristics of your premises and install the desired mounting option without any problems. Often this can be done simultaneously with the installation of a stretch ceiling. But if you have some repair and finishing experience and available tools, you can carry out the entire installation yourself.

First of all, you need to decide on the type of material for fastening. In most apartments, standard plastic products will do. Next, you need to measure the window opening and set the required length of the cornice. Now it is fashionable to cover the entire wall with curtains, especially if the room is elongated and the window is in a narrow part.

After purchasing the curtains, it will be clear what parameters should be calculated for its installation.

If you neglect these steps, there will be a high risk of damage to the entire surface of the stretch ceiling. The large height of the cornice will prevent the smooth installation of the canvas. Trying to install a curtain mount after completing work on stretching the ceiling in the case of using a niche will certainly lead to tears and defects in the stretched material.

Additional tools and materials that will be useful are a screwdriver, a drill and fasteners - screws and dowels.

Below we will consider two options for installing curtains.

Closed method (with niche)

First you need to fix the curtain to the ceiling at the required distance from the window. The fasteners must be screwed directly into the base of the ceiling. Most often this is a concrete slab. In this case, dowels are used. If you decide to make a suspended ceiling in a wooden house, use self-tapping screws. Then it is necessary to retreat such a distance from the wall on which the window opening is located so that the curtains can move freely and fall without catching on the edge of the niche. As a rule, installation is carried out 20-30 cm from the surface of the walls.

After this you need to nail the wooden beam. An important point will be the pre-treatment of wood with special impregnations to protect against fungi and mold.

A profile is installed to the lower edge of the beam to secure the tension web. After the PVC ceiling is stretched, you can hang the selected curtains and use them with pleasure.

There is one caveat. You can try to wrap the film material behind the block. To do this, instead of a fastening profile, you need to attach a bending profile to the tree from below, and install the fastening profile at the upper edge of the block adjacent to the rough ceiling.

Open way

The first step is to install a profile guide for the tension fabric on the wall near the window. Then markings are made, and a wooden block is mounted at the required distance.

The thickness of the timber is of great importance during the work process. It is necessary to ensure complete contact of the lower edge of the tree with the PVC sheet. You can use mounting wedges to control this moment.

After fixing the base, you can install the suspended ceiling.

Next comes the most crucial moment: the curtain should be secured with self-tapping screws directly through the fabric, carefully, without unnecessary damage. It is better to burn holes for fasteners with fire rather than punch or break through them. For reliability, you can install additional polymer gaskets in the places where the screws pass.

After completing all stages of work, your design is ready for use. The plastic base or metal profile of the curtain can be hidden behind the ceiling plinth for tension fabrics. And the above-mentioned baguette will serve here as decoration for your curtains.

The process of installing a ceiling cornice on mortgages

You can install the embeds yourself - this will give an advantage over taking measurements, as it will allow you to immediately mark the location on the drawing. It is difficult to install a cornice in this way without professional skills, but it is quite possible if you carefully follow the instructions.

You can install both ceiling and wall models in a niche, but it is better to give preference to the first option.

The installation process is as follows.

The first step is to beat off the ceiling level, and then install a wall molding along the marked line - an aluminum profile on which the ceiling will be attached (harpoon system).
Next, in place of the future cornice, mortgages are installed along the window or the entire wall. Regardless of the chosen material (metal or wood), the support can have a different design - either a solid platform or consisting of several individual elements. If the first option usually uses a long wooden beam or a metal profile, then the latter can use small wooden beams placed in a parallel chain at the points of attachment to the future cornice.
After stretching the ceiling, the mortgage will disappear from view, but will remain a reliable basis for attaching the cornice. You need to make markings on the ceiling canvas by attaching the cornice to the already hidden mortgage and make marks through the holes for the fastening. Installing reinforcing rings made of plastic around the marks will help prevent the fabric from stretching and spreading in places where it is fastened with screws.

Depending on the number of curtains, you need to purchase one, two, three or four-row curtain rods.

That's all! Having secured the ceiling cornice to the suspended ceiling, all that remains is to choose the “decoration” for the windows. A pastel curtain or a bright curtain – it all depends on your interior preferences. Since the cornice is placed a little lower, the hand can easily reach the hooks.

If you hang a ceiling rail across the entire width of the room, the curtains can be pulled apart on both sides of the window.

This will allow more light to enter the room.

Additional Information! After installing the hanging structure, the ceiling height in the room dropped slightly. If the curtains have already been purchased, their size will need to be shortened.

Problems of choice

Ceiling surfaces and recommended curtains

According to the methods of designing the ceiling space, it is usually divided into several types:

reinforced concrete ceilings;
tension systems;
rack structures;
suspended and mirror surfaces;
false ceilings;
raster or cassette coverings.

When choosing ceiling curtains, be sure to take into account the type of ceiling in the room. If you have reinforced concrete foundations that are standard for apartments, installing a cornice of any weight to the ceiling will not be difficult

But with tension or suspended plasterboard structures the situation is different. You will have to focus not only on the fasteners that come with the curtain rod, but also on the types of ceiling materials, because the curtain is attached not to the wall, but to the ceiling above the window

Types of designs and materials

Ceiling curtains help out when the window sill protrudes significantly into the room.

According to the type of material from which the cornice can be made, the following types of products are distinguished:

string curtains fit light curtains. Their design is represented by a string stretched between two fasteners. Under the weight of the textile, the cornice will begin to sag. Therefore, a hanging string curtain is suitable for a kitchen with a weightless curtain or a children's room.

wooden cornices will highlight styles such as Provence, classic, country, and rustic. The main advantages are the environmental friendliness of the material and the ability to withstand maximum loads.

profile systems are simple and democratic. However, it is with them that most design ideas can be solved. The design of the curtain is represented by a long aluminum or plastic profile with several rows. This feature allows you to hang tulle, curtains on one product and complement the design with lambrequins.

The profile is equipped with elements that round corners and connect its individual parts.

metal curtain rods are the most durable and can easily withstand multi-layer compositions and heavy printed curtains. This is an excellent solution for high-tech and minimalist styles.

Dimensions

When choosing curtain rods, the question always arises as to what size the curtains should be. If we talk about optimal parameters, then for a spacious room in which the windows are located along a long wall, you need to purchase curtains 50-60 cm wider than the window opening. It is necessary to cover a section of the wall surface to prevent oblique sun rays from entering the room.

For a narrow room, the dimensions of the cornice should be slightly narrower than the window wall.

Preparing to create a niche for curtains in a suspended ceiling

Preparation for installation of the recess under the cornice can be divided into several stages, each of which is important in its own way and requires attention and time:

The choice of design for finishing the upper limit, the possibility of installing a recess under the cornice and ways to implement the idea. From the very beginning, you should decide whether this design needs a niche and, if so, how it will fit in with the overall style of the room design. One of the most important points is the choice of the method of installing the recess for the curtains and the material for the main area of the ceiling - the type of tension fabric, gypsum board or a combination of them.
Taking measurements on site, determining the amount of materials needed. In order to make the correct calculation of the structure and recess, it is necessary to take into account all the protruding elements of the room and near the window space - the removal of the heating radiator, the window sill (and its length), the arrangement of heating water pipes. Next, you should make markings and preliminary calculations of the amount of material required.
Preparation of all materials and tools for work. If you plan to entrust the installation of the ceiling to a team, then the specialists themselves will provide the material and the necessary tools. If the finishing is done independently, then before starting work you should prepare the entire set of consumables and fastening materials, and working tools.

To install a stretch ceiling with a recess under the cornice you will need:

Wooden beam

Aluminum corner

Profile

Wall profile

Platform under the cornice

Aluminum suspension

PVC fabric

Required tool:

Screwdriver.
Hammer.
Building level.
Self-tapping screws, dowel-nails.
Scissors and hacksaw for metal.
Painting knife.
The spatula is wide and narrow.
Construction tape.

Next, the installation of the stretch ceiling itself is carried out. But before that, its surface should be prepared - clean the place where the profile will be attached and, if necessary, putty it.

Marking and installation of the niche structure

Frame assembly

Before assembling the box, all electrical work related to the placement of cables and spotlights is carried out.

Note! The process of arranging a niche for gypsum plasterboard curtains has an important feature: due to the small distance between the window and the outer edge of the box, attaching drywall to it is problematic. Therefore, this wall is assembled on the floor, and then attached to the ceiling with drywall attached.

The frame is assembled:

A guide profile is attached to the ceiling and walls along the marking lines. Fastening is carried out using dowels in increments of 40–50 cm.

If the ceilings are wooden, then the process is simplified: the dowels are replaced with wood screws with a wide head.

Profiles forming the lower edges of the box are attached to the lower ends of the guides located on the walls.

The standard length of guide profiles is 3 m. This is not always enough to form a structure. In this case, the profile is built up using the overlay method, fastening it together with a cutter or metal screws.

A cord stretched between the lower boundaries of the box on the walls will help control the deflection of the lower edges. Based on it, vertical jumpers made of ceiling profile (PP) are installed. They will also provide the structure with the necessary rigidity and will be useful when attaching drywall. Therefore, the step between these jumpers is 60 cm.
If the box width exceeds 30 cm, horizontal crossbars are required. They are also made from PP profile. For strength, the elements can be attached to the ceiling using straight hangers or profile sections. In the latter case, the side walls of the profile are removed at the ends. “Tabs” bent at right angles serve to attach such a homemade suspension.

Hidden curtain on a suspended ceiling (hidden cornice)

So, the curtain, which refers to the ceiling cornice, can be rod, profile, ceiling and hidden.

In this case, when installing the ceiling, the baguette must be attached to all walls, except directly near the window. In this zone, it must be mounted on a fixed beam (perpendicular to the ceiling) or a simple galvanized profile, the one used for drywall.

A hidden cornice is the best solution when you want to give the curtain the most aesthetic appearance

If you take a profile, you will need slopes

It is important to remember that a suspended ceiling will create a large horizontal load on the profile. You make a 10-20 cm indentation from the wall with the window, and you need to install a hidden cornice in this indentation

Then the cornice is mounted to the rough ceiling, and then the ceiling itself is stretched along the baguette. Everything is ready - you can hang the curtains.

Calculation of niche dimensions

The width of the structure (from the wall) is determined by adding the following parameters:

Determine the amount of extension of the window sill or radiator (depending on what protrudes further from the plane of the wall). On average, the offset is within 15-18 cm.
Measure the distance between the guides of the cornice if it is double-row. If there are more rows, take the distance between the outer guides.
A correction is introduced into the calculations on the side of the curtain. The amendment (not to be confused with the assembly factor, which affects the number of folds) depends on the length of the cornice, and usually does not exceed 10-15 cm.

Curtains behind the ceiling cornice Source wp.com

Design Features

The photo shows the use of various materials for curtains

The height of the niche should completely hide the drapery tape sewn to the curtains. In this case, the height of the braid is determined by the weight of the curtains and the length. The standard dimensions of drapery elements usually range from 7 to 10 cm, and the height of the niche must be increased by at least 5 cm. If you make the niche equal to the height of the ribbon, then the person below will see the drapery.

Schematic structure of a niche

The length of the box can occupy the entire wall or correspond to the width of the window opening. If you prefer the latter option, make indents on each side of the window of at least 50 cm. Then the curtains, when hung, will not prevent sunlight from entering the room. For Roman blinds, 10 cm indents are enough.

As for the maximum height of the structure, you should not make it more than 40 cm deep. Otherwise, it will be difficult to attach curtains and hang curtains.

Dependence of niche depth on cornice design

Consequently, if you plan to place curtains and tulle on the cornice and supplement the system with lambrequins, then there will be three profiles, respectively. This is a minimum of 15 cm. Add another 5 cm on each side. The width of the niche is 25 cm.

False ceiling with niche for curtains

Plasterboard ceiling with niche for curtains

Drywall is a universal and practical material that has found application in the construction industries. Gypsum boards are easy to work with, they bend well, so a niche for a ceiling cornice made from gypsum plasterboard will be spacious and attractive. Installation of a niche begins with measurements of the room and the place where it will be installed. From the beginning, you need to decide what function the box will perform - decorative or just to hide the curtain. Before you start arranging the niche, you need to completely finish the work with the electrical wiring if you plan to install a plasterboard ceiling with lighting.

The work is carried out as follows:

make a marking on the ceiling with an indentation for a niche of at least 15 cm. Then, even if the canvas gathers into folds, unsightly creases will not form;
Guide profiles are installed along the perimeter of the room, after which the frame for the suspended ceiling is assembled;
using self-tapping screws, two frames are combined - a niche and a suspended structure;
sheets of plasterboard are cut to the required sizes, and the frame is sheathed;
install cornice for textiles.

At the final stage, all joints and cracks are sealed with putty, and the ceiling is decorated in any chosen way.

Box under the cornice in a suspended ceiling

How to assemble a box under a cornice in a suspended ceiling

It is better to entrust the installation of a niche from suspended ceilings to specialists, as well as the installation of the entire decorative structure. Usually the work is carried out in the following order:

First of all, curtain rods for suspended ceilings are attached to the ceiling using dowels with metal or plastic sleeves. Its initial installation is necessary in order to determine the dimensions of the niche. When work on installing the box is carried out, the baguette can be removed to avoid damage during the work; First, the base for the niche is made. To do this, step back 2-3 cm from the cornice and fix wooden blocks to which the profile for the tension fabric will be attached

After the timber is secured with screws, proceed to installing the decorative ceiling; a profile under the tension covering is attached to the inside of the wooden beam, and the canvas is tucked into it using one of the selected methods.

What is

Externally, the structure resembles a box. It performs several functions at once. Allows you to disguise the curtain and install decorative lighting for a more modern and attractive interior.

Thanks to this niche, it seems as if the curtains are falling from the ceiling. It can be built not only in tension, but also in suspended fabric. The size of the box depends on the baguette. This must be taken into account before starting work.

If the curtain is small, then a few centimeters of space will be enough. For bulky multi-level models, the box can reach 10 cm. Therefore, it is recommended to figure out in advance which curtains you plan to hang and which baguette is suitable for them. This should be decided before the ceiling panel is erected. It will not be possible to make a separate recess in the already finished cladding.

@remontnik.ru

Such a solution allows you to achieve a more neat look for the window opening, fit the curtains organically and elegantly into the design, avoid damage to the surface of the tension film, and additionally introduce lighting, which will make it possible to combine several functions in one niche.

It is worth noting that the recess should be of such a height as to hide the drapery tape at the curtain. This is also thought out in advance, taking into account the size of the curtains. The box can be the same length as the window or occupy the entire wall. With the latter option, it is important to make small indentations of 50 cm on both sides. The width depends on the selected curtains, their thickness, and the number of layers. It is also important whether tulle will be used.

Reference. When figuring out how wide a niche should be, you should take into account the removal of window sills and the presence of heating radiators.

Niche design: creating lighting

It was noted that in addition to the main function, the box allows you to integrate lighting. The organization of additional lighting will look unusual and attractive. The lighting will create the effect that the curtains are airy. To achieve this goal, a strip with LEDs is inserted into a special groove. It can be any color; you don’t have to choose a classic one. This also helps to visually increase the height of the space. Relevant for low rooms.

@remontoffanapa.ru

The box for the curtain rod allows you to hide the auxiliary elements and leave only beautiful curtains for the eyes. There are several methods to implement such a project. One of them can only be performed by professionals. Therefore, if you plan to carry out the work yourself, it is worth taking into account the peculiarities of the methods for creating a recess.

The construction of the box should be planned at the ceiling design stage. Otherwise, it will be impossible to implement such an idea later. A strip of lighting will create an airy effect and add light to the room.

LumFer niche with reflective lighting for lamps made from profiles Ba01 and M01

The Lumfer niche with reflective lighting for lamps is made of two parallel running profiles Lumfer Ba01 and profile M02, and is fully integrated into the suspended ceiling (without gaps, cracks, plugs, seals). The niche profile is made in black and white.

Any type of static lamps can be installed in the niche for lamps - linear, spots, etc.

It is possible to mount a niche of any length and shape with a joining angle of 90 degrees or more. Structures with sharp joining angles are not manufactured. The niche does not fit into a two-level structure (with or without lighting). The minimum length of the niche structure is 1 meter. The minimum distance from the walls both to the end of the structure and to its side is 30 centimeters. The distance between niches is at least 30 cm.

Methods for equipping a niche for a tension system

A niche for curtains in a suspended ceiling is not a complex element in its design. However, to create it you will need a lot of experience and skills. If you wish, you can decide to work independently, provided that all the subtleties and nuances are observed. You need to know where to attach the structural elements and what fittings to use for installation.

Important! The marking and installation of niche structural elements is carried out at a preliminary stage, when the canvas for the ceiling part is in a folded state. Alterations already in the process of stretching the fabric or film can lead to the main surface going in waves and folds appearing on it.

What the main work looks like in this case:

the recess is made using a metal or plastic profile, which is attached with dowels directly to the rough ceiling surface;
a metal corner or wooden beam is fixed in different places, while at the same time constantly checking the horizontality of the structure;
for those cases where lighting equipment is planned, profiles with a special shelf are used.
profiles or baguettes in the place where the niche is planned are attached first;
stretching the film or canvas is done only when the finishing of the niche is completed.

For reference: the bottom of the niche is usually plastered or covered with sheets of plasterboard. Accordingly, the upper corners in the niche must have the correct shape so that there is somewhere to install a glazing bead or wedge profile to fix the edge of the canvas.

The main parts and structural elements are indicated in the figure, which allows you to get a fairly complete idea of what you have to deal with. The presented set of equipment and devices is standard for the equipment of recesses in tensioned fabrics.

To work you will need:

aluminum corner 40x40mm;
bumper;
ceiling and PVC plinth;
harpoon.

This design is designed for the most rich equipment of the ceiling surface, including the installation of spotlights and hidden lighting.

Another option for installing the recess looks more affordable and simpler to implement. This requires a minimum of parts and connections. Instead of expensive metal components, you can use wooden blocks and plastic harpoon baguettes.

The simplest option is based on the use of a wooden block. The dimensions of the timber can be 40x40 or 50x50mm. Ceiling and wall moldings are used to fasten the canvas.

Types of niches for hidden cornices

Sometimes, for some reason, it is impossible to organize a recess under the curtains (for example, the communications running along the ceiling interfere with screwing the cornice). In this case, the cornice is mounted directly on the suspended ceiling, on a base, which can be a beam placed 5 mm above the canvas. From the outside (from the side of the room) the structure is covered with a decorative overlay.

Hidden built-in corniceSource all hereclub.rus

In other cases, a niche is formed in the structure of the stretch ceiling. Stretch ceilings with a niche for curtains can be made in several ways. Technical solutions vary in degree of complexity, which affects production time and cost. The following options for cornice recesses are possible (in order of increasing cost):

Budget niche. The low-cost method mentioned above, in which a niche is formed using a beam that takes on the main load (it is attached to a concrete base). From the side of the room there is a smooth canvas trimmed with decorative edging. The advantages are ease of installation. There are two disadvantages - a visible edging, which does not always look decent, and also the opportunity to get acquainted with the design by looking at it from the side of the window.

The canvas hides the presence of the beam and corniceSource nevapotolok.ru

With the installation of a plasterboard box. A niche formed from plasterboard separates the cornice and the suspended ceiling. Due to the fact that it is structurally slightly lower than the canvas, you cannot damage it when hanging curtains. The advantage of this method is that the cost of installing the ceiling does not increase. The disadvantage is that the finish looks uneven, and the price includes drywall work.
Aluminum profile with bend. The use of a special profile allows you to get a neat recess with the blade folded upward. The profile is a square pipe, unlike a wooden block, which allows you to insert the blade through the bumper and secure it in the place provided for the harpoon. The advantage of the design is simple installation and aesthetic appearance (no edging), the disadvantage is that if the canvas is lowered too much, the gap in the niche can exceed 4-5 cm.

Using aluminum profileSource euroizum.by

The fold of the canvas reaches the ceiling. The bend is carried out to the concrete base, for which special profiles made of plastic or aluminum are also used. As a result, all parts are securely hidden under a perfectly smooth canvas without a hint of a gap. The method is desirable if, for example, the window opens onto a balcony. There is only one minus - there is a possibility of damaging the canvas during operation.
Soaring stretch ceiling with a niche for a curtain. An elegant option for disguising a ceiling cornice: an LED strip creates romantic lighting, while the structure remains out of sight. To increase the effect, you can make indents from all walls, and not just from the window. The advantage of a floating ceiling is beauty, the disadvantage is the complexity of the work, which is reflected in the cost.

Floating stretch ceilingSource m-ok.com.ua

About a niche with lighting on a suspended ceiling in the following video:

Stage two: fastening profiles

Next, we take the metal mounting plates and bend them at a right angle. The length should be selected 5-10 mm less than the height from the main ceiling to the level at the attachment point. It is allowed to use various models of steel corners, furniture consoles, and “boots” made of plasterboard profiles instead of plates. In our example, the distance from the line along which the baguette is fixed to the main ceiling to the corners is 30 mm: 10 mm aluminum baguette and 20 mm thickness of the block.

The next step is to attach the timber to the corners. The block should also pass 5-10 mm above the level of the stretch ceiling. It’s okay if the block does not reach a few centimeters to the corner, the rigidity of the structure will be sufficient and will not move the niche in the future when stretched. It is best to use laminated veneer lumber; it is less susceptible to deformation from moisture and will not deteriorate over time.

And the most crucial moment is the installation of the aluminum baguette. It will act as a bumper through which the film bends. The profile should not have burrs, dents, traces of tape or other damage, and it should not be bent. The evenness and clarity of the inflection line depends on its quality. Use a laser level (for example, Bosch GLL 2-15) to more accurately align the bump stop. If there is no level, a tightly stretched marking cord will do.

Briefly about the main thing

When installing a stretch ceiling, you cannot do without arranging the mounting location for the cornice. To do this, create a niche that will allow you to effectively secure the curtains, save on purchasing a cornice to match the style of your interior, and arrange decorative lighting.

The dimensions of the eaves niche are calculated before the start of repair work. Its dimensions are influenced by the model of the cornice, as well as the width of the radiator or window sill, the pomp of the curtains and some adjustments.

Several methods are used to create a niche. It is popular to use an aluminum profile with a bend, a plasterboard box, a floating ceiling, or bending a PVC sheet (or fabric) to the ceiling.

Advantages

Installation of suspended ceilings with a niche for curtains has a number of other advantages:

the window opening looks neat, harmonious and elegant;
the film sheet will remain intact as a result of installation work, and when installing a ceiling cornice without such a box, there may be a risk of damaging the decorative coating;
the design harmoniously combines with different interior styles;
curtains to the ceiling with a niche for curtains visually expand the space;
You can use a niche to disguise decorative lighting. Since LEDs do not overheat, they can be placed next to textiles.

Advantages

The niche is part of the design project; it is made in advance during the renovation.

If it is difficult to decide on such an opening in your ceiling, you should familiarize yourself with the advantages of this design:

all the fastenings on which the curtain is held and all the mechanisms with whose help it moves are hidden in the ceiling;
the appearance of curtains flowing from above without any visible support is magnificent;
if the room has a glossy ceiling, flowing curtains look twice as long and seem to stretch the room, making it visually taller;
the niche will suit any style, you just need to choose the right textiles for the windows;
such types of curtains as roller, Roman, Austrian, Japanese; screens, when lowered, become flush with the wall and create the impression of a single whole;
In the niche you can hide LED lighting, thanks to which the curtains will acquire a fabulous charm.

Assembling the frame of a narrow box

With this option for arranging a niche for curtains, a single-plane frame is constructed. Drywall is attached to both sides of the profile, forming a narrow box:

Guides are installed on the walls and ceiling.
A thread is pulled, showing the lower border of the box.
The bottom guide is screwed on.
Using the thread as a guide, install vertical jumpers.

USEFUL INFORMATION: Installation of sockets in plasterboard: how to install a socket box and socket in plasterboard