How to update an old crib with your own hands

All children love to be surrounded by bright, colorful, light and cheerful objects. Painting children's furniture in bright colors, applying cartoon characters, fairy-tale characters, flowers, patterns or cute animals to its surface will delight any child and add a good mood to everyday life. You can create a designer crib in just a few weekends.

Materials for children's furniture

The main point in implementing such an idea is the choice of paint for the crib, because if the approach is incorrect, the baby’s health may be at risk. Keep in mind that teething babies will try to chew on the crib. Therefore, in order to avoid an allergic reaction, poisoning, or irritation of the baby’s mucous membranes, the paint must be environmentally friendly and free of toxic substances.

Special types of paints for children's furniture do not contain lead, toxic oxides, toxic elements, heavy metals and harmful organics. In order not to make a mistake in choosing a material, you need to check the availability of an authorization certificate for paint or varnish, which allows you to use them for children's products.

The crib should be painted with materials that are resistant to mechanical stress, so that the child cannot break off pieces of wood. When choosing paint, preference should be given to products made from safe solvents, preferably water. It is necessary to select materials that are not flammable and that do not emit toxic substances during combustion.

Painting process

It takes very little time and expense to remodel an old wooden crib. All work consists of the following stages:

• First of all, disassemble the crib into its component parts;
• old paint, if any, must be removed and the wooden surfaces polished with fine-grain sandpaper, trying to make them as smooth as possible;
• sand large parts using a special round attachment on a drill with emery pads;
• remove dust from treated surfaces in order to apply paint and varnish materials in an even, clean layer;
• Wash small parts and grilles thoroughly with soapy water and dry well;
• sanded elements should be coated with a water-based stain that has the same tone as the gratings;
• assemble the furniture, firmly connecting all the parts;
• Apply clear acrylic varnish or paint to all elements, including grilles. The choice of varnish should be given special attention. It must be safe for children's toys and not contain harmful substances. It is good to use one that is water-based, odorless, dries very quickly and is absolutely harmless to the child’s health. Paint or varnish must be applied in 2 layers;
• at the next stage, use a rag or sandpaper to walk along the edges of the product where drops of paint could have accumulated;
• After painting, the baby crib should not be left in the fresh air (on the street or on the balcony) until the paintwork has completely dried. Otherwise, small debris or insects may stick.

For painting you will need a roller, brushes and a sponge. Large, flat surfaces should be painted with a roller. Brushes of different sizes are convenient to use for rods and crib posts; a sponge works well for small elements.

During work, you need to make sure that paint clots do not appear in certain places. To do this, you need to put a small amount of liquid on a brush or roller.

How to quickly remove old varnish from the surface of the crib?

You won't be able to quickly remove old varnish from furniture. Skills and tools are required (grinder, grinder, round attachment for a drill in the form of a grinding wheel, special remover). Craftsmen recommend using Dufa Abbeizer remover. However, the product has a smell and does not behave equally well on all surfaces.

Surely every home has wooden furniture that has lost its aesthetic characteristics, but has retained its practical value, and perhaps over time has even acquired historical significance. To restore such furniture to its former attractiveness and protect it from external adverse factors, use restoration paint.

Additional recommendations

It is not necessary to paint the crib with only one type of paint material. You can show your imagination and paint only individual elements, and apply varnish to the rest of the surface, because wood itself is a beautiful material. You can buy small jars of azure in different colors and make the furniture multi-colored; this will help your baby learn to distinguish colors.

By creating a new bed design for a child, you can simultaneously increase the ventilation of the mattress due to the bottom of the crib. This is done by cutting a hole in the bottom of the product, which consists of fiberboard or a solid sheet of plywood.

When purchasing a finished wooden crib that was not coated with protective compounds at the production stage, you need to paint it yourself. Restoring the varnish layer is also required when using an old product. In both cases, it is important to properly prepare the surface before starting work. You need to choose what to paint the crib with.

How to make the perfect crib

You can buy a crib at any store. The only thing that is scary is the price - a high-quality and beautiful cradle made of natural material that is truly beneficial for the baby’s health can cost more than a parent’s bedroom set. But making a crib yourself is not so difficult, and if you are not a carpenter with extensive experience, the simplest model from IKEA, an inexpensive crib from the market, or even an old wooden playpen that has been stored in the garage for years will be suitable for remodeling. Dear fathers and craftsmen-mothers, let's get down to business?

What's wrong with a cheap wooden crib or, say, one inherited? Firstly, the appearance: the new one, most likely, was either not painted at all, or it’s not a fact that it was safe paints, but the old one often has to be completely repainted. Secondly, problems with the mattress: most likely, it will have to be completely replaced with a better one, and if everything is in order with it, then it won’t hurt, as pediatricians advise, to increase the ventilation of the crib. Both problems can be solved quite simply.

Important : if something becomes unclear to you, or you have questions about paints and varnishes, be sure to ask them in the comments! We will try to answer!

How do manufacturers paint cribs?

For a newborn, select furniture that does not contain toxic substances. For this reason, the most common option is made of wood. To eliminate the risk of injury if a splinter gets under the child’s skin and to increase the service life of such a product, it is painted. In production conditions, the following options are used:

1. Water-based compositions. Materials of this group do not cause harm to the child’s body; the unpleasant odor when painted quickly disappears. The coating is smooth, and the layer of dried paint is pleasant to the touch. Colored composition or transparent water-based varnish is popular. More often, a baby's crib is painted brown or white. If varnish is used, the natural texture of the material is preserved. At the same time, it is not advisable to decorate a piece of furniture in a different color, even if the coating is outdated. It can be restored.
2. Oil paints. Such compositions do not allow moisture to pass through and allow you to apply a uniform layer of material. Oil paints protect wooden structures well from damage. To increase the service life of the coating and the crib itself, special additives (antiseptic) are used. This helps prevent the development of mold, mildew, and rotting.

What paint to paint a baby crib

Furniture for a child should be safe, but at the same time well protect the wood from damage, and the baby from injury if there are roughnesses on the surface.

There are other requirements for finishing materials:

• a prerequisite is the absence of various volatile components in the composition of the material;
• the paint should not contain heavy metals, toxic and other dangerous substances, since children often bite improvised objects;
• high drying speed, solvents in the composition must be harmless;
• No flammable substances are used in the production of paint for children's furniture; in addition, pay attention to the properties of materials, their behavior during the combustion process - the components should not emit toxic compounds;
• resistance to moisture, aggressive environments and mechanical loads;
• ease of care;
• elasticity, which ensures the material’s resistance to the influence of negative factors and extends its service life.

It is better to consider glossy paint for painting a baby crib, since a matte finish is more difficult to clean - any dirt is imprinted on it and immediately catches the eye.

Water based

Water-dispersed compositions are considered the most preferable for painting surfaces and structures in a children's room. Such materials are divided into the following types:

1. Acrylic compositions. The paint of this group meets the requirements for finishing materials in a nursery. Moreover, the price is reasonable. The advantages include the presence of antibacterial additives in the composition. It dries quickly and the coating is smooth. The material tolerates mechanical stress, moisture, temperature changes and ultraviolet radiation well.
2. Latex. The paint is based on synthetic latex. The price of compositions in this group is lower than acrylic ones. When painted, a moderately durable coating is created. The material tolerates contact with liquid well, which makes maintenance easier. Disadvantages: exposure to ultraviolet radiation, temperature changes.
3. Silicone compounds. They are resistant to moisture. When painting, a film is formed on the surface of wood that is prone to self-cleaning. It is characterized by hydrophobic properties, elastic, not susceptible to microorganisms, allows steam to pass through, tolerates temperature changes well and lasts a long time.
4. Polyvinyl acetate materials. This option is also suitable for finishing children's furniture. Advantages of the material: does not emit toxic substances when burning, resistant to ultraviolet radiation and aggressive environments. The coating is elastic, but does not tolerate contact with moisture.

Based on milk casein

These are safe materials and do not contain volatile components. The composition includes milk casein, porcelain. The last of them acts as a strengthening substance. The first is in the form of a binding component.

When applied to wood, no characteristic odor appears; the composition is characterized by high adhesion, which allows you to treat even surfaces on which old paint remains.

Such materials are considered conditionally safe. This expands the scope of their application. A composition of this type can be used to improve the appearance of particle boards: chipboard, fiberboard, laminated chipboard. The material can be used in confined spaces.

Criterias of choice

Before covering the surface, preliminary finishing work must be carried out correctly. Violation of one of the technologies of this kind can cause problems with further processing. In addition, low-quality finishing materials can cause negative effects on the baby’s health.

Initially, the characteristics of dyes are studied. In turn, they must meet the following criteria. In particular, this applies to paint, so that everything is safe:

• The composition of finishing materials should not contain substances that cause allergic reactions. It is better to avoid those products that contain unknown compounds and contents. They have special coding.
• The paint must not contain heavy metals or pesticides. It often happens that children put everything that surrounds them into their mouths, so paint particles enter the body. When interacting with organic substances in the body, they oxidize and release harmful particles, destroying furniture fibers.
• The basic components of children's paint do not contain chemical compounds. The most suitable solvent for the substance is water. During the drying process, water does not release volatile harmful substances into the air throughout the entire time. Some impurities have an adverse effect on the body.
• The harmless composition eliminates the presence of flammable substances. This will ensure safe operation in extreme conditions. As a result of combustion, no harmful components and compounds will be released into the air.
• The paint must be elastic, well pliable for periodic wet cleaning and chemical influences. Constant contamination from food, paint, feces and the need for cleanliness can significantly wear down the coating, leading to mechanical damage.

Painting technology

Taking into account the above requirements for the coating of a baby crib, you need to choose the right composition and avoid mistakes during application. As a result, the design will remain attractive for a long period. The paint can be of any color, but more often a composition of a bright shade is chosen.

Painting a baby crib for the first time

If furniture is made to order, it is not always coated. Then the owner paints the crib himself. You can purchase a ready-made color composition or white, and add the color of the required shade to it. Painting instructions:

1. The entire surface of the crib is cleaned of dirt: dust, shavings, oil stains.
2. The first layer of material is a primer. This measure will ensure high adhesion of paint and wood.
3. Rollers and brushes are used to distribute the composition.
4. To make the color more saturated and the coating even, apply the paint in several layers. There are breaks between stages, as it must dry completely before painting work continues.

How to paint a baby crib at home?

It makes sense to paint a baby crib if it is not new, because at the time of purchase you can purchase furniture for the nursery in almost any color scheme. For work, it is important to choose non-toxic paints and follow safety precautions. It is not advisable for the expectant mother to renew the coating on her own. You need to involve close people in this.

For children's furniture, it is necessary to carefully select paint, as it must meet all safety parameters and not contain dangerous compounds.

How to paint a baby crib? When choosing materials, it is important to focus not only on the desired shade, but also on complete safety for newborns (see also: videos and lessons on knitting booties for newborns). They should not contain toxic solvents, poisonous oxides, volatile chemical compounds, heavy metal salts and other harmful impurities. The following types of paints meet these requirements:

1. Water-based acrylic. Wear-resistant, easy to use, and do not break down from constant cleaning. However, their cost is quite high.
2. Nitro paints. Form a durable fireproof coating. They dry quickly, have no pronounced odor, and have a low price for painting 1 sq.m.
3. Water-based. Non-toxic, easily and tightly cover furniture, odorless, can cover cracks 1-2 mm deep, last up to 5 years.
4. Oils-waxes. Creates a flawless coating thanks to its high-quality composition. The oils are absorbed into the wood, and the wax creates an outer water-repellent coating. The only drawback is the high cost.

How to reupholster the base of a bed with your own hands: master class + tricks and tips

If the base of your bed is upholstered in fabric, and the fabric is no longer as fresh as you would like, here is a master class on how to make new upholstery.

This method is suitable if the upholstery of the bed base is worn out, dirty, or you just want to change it. For example, in our case, for a small bedroom, we wanted the furniture in it to be light. Therefore, it was decided to change the dark fabric upholstery to a new, light pink color.

All work was completed in 1 day. Here the reupholstery took a little longer than it might have, as the original dark upholstery could show through the new light pink fabric, and the base was first reupholstered with an additional layer of white fabric. If your fabric for upholstery is thick enough, you can skip the “lining” step.

How to sew a sofa cover: 3 master classes

You will need:

— fabric for reupholstery;

Is it possible to varnish a crib at home?

The most popular colors that parents prefer to paint children's furniture are cream, brown, pink, blue. However, many of them only want to emphasize the natural texture of wood and protect it from negative environmental factors. Non-toxic acrylic varnishes are suitable for this. They are transparent, resistant to ultraviolet radiation, chips and damage, and do not have a strong odor. Nitrovarnishes and water-based coatings are not suitable for children's furniture. The former are toxic, the latter are impractical because they are destroyed under the influence of liquid.

Acrylic varnish applied to the surface of the crib will highlight the structure of the wood and give it a classic, natural look.

Furniture can be coated with an acrylic composition at the final stage. Its surface is first painted, sanded (sanded with sandpaper No. 80, 100) and covered with a water-based stain. In the first case, the furniture will take on a more well-groomed appearance. In the second option, the stain will darken the wood in several layers, and the varnish will emphasize its pattern.

Fun colors

Acrylic enamel for windows and doors TRIORA will help give the crib color. Why this particular material? Water-based enamel contains substances that prevent surfaces from sticking together. It is very convenient when furniture is transformed - the surface does not deteriorate from gluing parts together. In addition, enamel helps restore furniture previously painted with other materials and hides worn parts of the wood.

As for color, wood enamel is tinted in pastel shades. This is the best option for a child's room. Bright colors can disturb little ones, but light colors will add color to the room and emphasize the childish atmosphere.

How to work with enamel?

• For a new tree, it is enough that it is clean and dry.
• Previously painted products should be cleaned of old coatings, degreased and dried. If there are large scratches, smooth everything out with wood putty. The smoother the surface, the more beautiful the final result will be.
• The enamel is applied in two layers. The second one must be applied after the first layer has dried.

You can update children's furniture beautifully and without risk to the health of the kids. Choose only safe materials and enjoy the results.

Stages of painting a crib

Before painting the sleeping bed, it is necessary to prepare the materials and surfaces of the furniture. You will need paint, a roller (a small flat brush and a large round brush), a sponge and a rag. There are aerosol coatings that are applied by spraying, but their use results in increased material consumption. During painting work, you should adhere to the following plan:

• disassemble furniture into elements;
• clean off the old paint (if you are not planning to coat it over the existing composition) using a spatula, grinder, brush, or chemical remover;
• remove dust, treat resinous knots (if any);
• fill up flaws, chips and cracks;
• sand the surfaces with sandpaper and remove dust with a rag;
• if you plan to paint on the sides, you should prime the surface after sanding;
• using a roller or brush, apply a thin layer of paint, carefully covering the ends and back;
• After the first layer has dried, apply subsequent layers and leave until completely dry.

Painting is carried out in several layers after each has completely dried.

It is correct to paint the bed not with one dense layer, but with two or three thin ones. The procedure is carried out 3 weeks before the start of use of the furniture. This will allow you to promptly eliminate coating defects and completely remove the subtlest smell of paint. If after painting the coating begins to bubble and come off, the work is redone: the surface is sanded, degreased and painted. Final drying time takes up to 8 hours.

Recommendations for restoring a crib

Often a baby inherits a bed from older brothers, sisters, friends and relatives. It does not always have a look that suits parents, and restoration has to be done. The following activities will allow you to update the appearance of your sleeping place in a short time:

1. Checking the possibility of coating restoration. It is important to determine whether the old coating contains lead. If this is the case, then the paint has already become embedded in the wood and cannot be removed. You should refuse such a sleeping place.
2. Safety assessment. Instructions for use of toddler beds change. Furniture that was safe 10-15 years ago may not meet modern requirements. You should pay attention to the distance between the sides of the crib. It should not be so large that the baby can stick his head through.
3. Preparing for a new paint job. It is worth removing traces of old paint, cleaning it from dust, sanding it, and making sure there are no burrs or sharp corners.
4. Painting. Craftsmen recommend choosing Tikkurila, Dulux, “Yarko”, PF-115, Symphony Winner paints. The brands Tikkurila Miranol, Enamel Poli-R, Krasivo (Kvill) are suitable for painting white. Alpina, Tikkurila Euro Pesto, Enamel Aerosol coatings work well in brown. It is not recommended to use red and yellow alkyd enamels from the manufacturers Kudo, LA-060 Element, PF-115 Lakra, since they contain lead.
5. Choice of bedding. The mattress and linen must be new and match the size of the bed so that the baby is comfortable.
6. Strength test. It is important to make sure that the model is ready for long-term use. For this purpose, mechanisms and loops that can cause harm to a child are checked. The crib frame can be wrapped in a protective cover that the baby can chew on without harming himself.

Note to crafty parents: how to make a baby’s crib unique?

You can give your baby's sleeping area a designer shine with your own hands in a few days. This inspires parents who like to work independently to improve the interior of their apartment and house. In this case, it is better to look at photos of interiors in children's rooms and act in this way: (we recommend reading: children's room for a newborn girl or boy: photos of interiors)

• think over the original design of the bed (pattern, decor);
• choose a color, choose the right paint (acrylic, latex);
• calculate the cost of work and begin execution;
• make decor from fabric: patchwork blanket, crib bumpers, canopy and more (we recommend reading: how to put a canopy on a crib yourself and a video tutorial);
• add wheels, make ventilation holes in the bottom of the bed;
• decorate bed linen with appliqués and stripes according to the nursery style.

Parents should know that sometimes you can do without paintwork. In this case, the crib should be sanded and left in its natural form. Often, when restoring a crib, craftsmen use special waxes and oils, which allows the natural shade of the wood to be preserved. However, if you need to express the uniqueness of a child’s room with a certain color, only painting with safe materials will help.

How to update a crib

Very often, cribs are inherited; often a mother puts her baby to sleep in the same cradle where she rested when she was an infant. It is a pity to throw away such things, only if the furniture is wooden and made of very high quality.

You will need

• – the latest mattress;
• - sandpaper;
• – rough brush;
• – primer;
• – paint suitable for processing children's furniture;
• – napkins and glue for decoupage;
• - burning device.

Instructions

1. Observe the crib, check the condition of all its parts. You definitely need to replace the mattress with a new current model that will help the child grow positively and will not deform the spine. Never leave a worn-out cotton or foam mattress. 2. You will also need to replace the wheels of the crib so that they move easily, allowing you to quickly move the furniture to where you can comfortably lay the baby. 3. Disassemble the item neatly. If any wooden parts of the crib are broken or badly damaged, put them aside and order the same from a carpentry shop. 4. Remove the old, cracked coating using a special remover or large sandpaper. Clear the work area of ​​debris and finish cleaning with fine sandpaper. Use a rough brush to remove dust from the treated wooden elements. 5. Treat the crib with a special primer that will protect the wood and help the new coating adhere better. Choose paint only for indoor use and suitable for children's furniture. There are textured coatings based on acrylic latex; they are perfect for restoring a crib. Apply the paint with a synthetic brush or small roller. 6. When working, strictly follow the recommendations specified in the instructions for use. To achieve a rich, shiny color, apply another coat of paint after the first one has dried. For additional decorativeness, paint each crossbar on the crib with a different color of paint. 7. The crib can be decorated using napkins for decoupage. Glue fun designs on the outside of the backs and cover with a suitable water-based varnish. 8. If you have the opportunity and knowledge, you can try to burn an ornament on the crib with the help of a special device. Choose a drawing that is primitive, distinct and clear. You can write any good-natured wish or nursery rhyme in a stylish, captivating font. 9. The baby spends a lot of time in the crib and understanding the outside world begins with this piece of furniture, so restore the thing with love and tenderness, diligently and scrupulously.

If it is customary to invite specialists to assemble a kitchen or cabinet, then expectant parents usually assemble a crib with their own hands. And tea is also not as simple a task as it seems at first glance...

You will need

• screwdriver, assembly diagram, disassembled crib, screws, screw plugs

Instructions

1. Cover the assembly space with a clear cloth or paper so as not to scratch the components of the crib and to find any lost screws during the process. 2. Screw the static back wall to the sides of the crib with the screws included in the kit. Traditionally, this requires 4 screws, two on each side. Don't mix up the top and bottom of the back wall. The side panels traditionally have legs, so it's harder to confuse them. 3. Install the crib bed. Sometimes it comes as a single element, and in some models, transverse boards, fastened with cord, are laid into the grooves of the back wall and a special separate block. Do not fasten the stock tightly yet; lightly “tighten” it with screws. 4. Insert the movable front wall of the crib into the special guide grooves on the side walls; now you can secure the bed with screws properly. 5. Turn over the entire structure, you will find metal grooves for inserting wheels. If you plan to roll the crib, then insert them, but if you will rock it from side to side on the arched lower elements of the sidewalls, then do not insert them. 6. If you have a pendulum crib, then it’s time to start assembling the pendulum mechanism. Don’t forget to insert a laundry drawer inside the pendulum body, and then secure the side wall of the pendulum with screws. 7. Place the assembled crib on the pendulum, use bearing mechanisms, make sure that the holes for the clamps match. Install the fasteners. Cover all screws with plugs for beauty. Video on the topic

When a small person appears in the family, along with great happiness and joy, turmoil and care come into the house. All the parents’ efforts go into creating comfortable conditions for the newborn; the more comfortable he is, the greater the peace and joy in the home. After birth, the baby spends most of his time sleeping, which is why you need to positively choose a crib for your baby , having studied all the options of the product.

Instructions

1. It is desirable that the crib be made of natural wood, smooth and coated with non-toxic varnish or paint. It is also possible to ask the sales representative to show a hygiene certificate for the product. Its presence indicates that the product corresponds to the quality presented. 2. After a few months, the grown baby will try to stand up, firmly rocking the baby bed. The crib should not lose its original solidity. The safety of the child depends on its stability. 3. You should check in advance that the crib does not have sharp corners or other strongly protruding elements. The shape of the structure should be streamlined so that the baby does not accidentally get injured. 4. The product must certainly be made like a rocking chair (have runners or a pendulum mechanism that provides rocking). This difference from ordinary beds allows you to rock a baby without special efforts. 5. It would be better to abandon the model with a solid bottom and opt for the option with a slatted bottom. A mattress that is closed at the bottom will inevitably rot because a small child will wet it more than once or twice. In the case when the bottom is made of slats (with small intervals between each other), free air ventilation is ensured, as a result of which unpleasant odors and excess moisture do not accumulate. 6. All the side partitions of the crib, as usual, are made of rods. It is very important that the intervals between them comply with safety standards (5-6 cm), and exclude the slightest possibility that a little person’s hand or head might get stuck there. If you follow these simple tips, you can easily choose a crib for your baby - one that is safe and strong , which will serve regularly for many years and delight the baby with its convenience. Video on the topic

A baby has appeared in your house. And with it a problem arose: how to set up a crib so that the child feels comfortable? Tea nothing should disturb his sleep. The state of his health largely depends on how well a child gets enough sleep.

Instructions

1. Many experts agree that for the first six months of a baby’s life, it is better to sleep in the same bed with his mother. Such contact is necessary for his healthy mental and mental development. If you are sure that you sleep peacefully and do not toss and turn in your sleep, lean towards this option. The baby will be calmer, constantly feeling the presence of his mother next to him. 2. If you decide that from birth the child should have his own, separate room, then immediately decide what place in it will be allocated for the crib. Please note that under no circumstances should a child’s bed be placed next to heating appliances. Children tolerate overheating much worse than minor hypothermia. 3. Carpets and books are delightful almanacs and dust collectors. Therefore, there should be neither one nor the other next to the child’s bed. When exposed to dust, a child may experience various allergic reactions. Don't take any risks! 4. Odors do not have to reach the crib. Exclusively tobacco smell. Remember that strong-smelling plants have no place in a children's room. The child spends a lot of time sleeping and the proximity of “smelly” plants, many of which are also toxic, is undesirable. 5. Fresh air has a charming effect on sleep. Of course, do not place the crib in a draft, but keep in mind that the room where it is located must be well ventilated. 6. The room in which your baby will sleep should be isolated from strong noise and loud sounds from the street. But don't overdo it, don't create immaculate silence. On the contrary, in the future, your child will suffer from minimal noise, and his sleep will be restless and disturbed. 7. Now your baby is still a baby. But the day is not far when he will begin to move around the crib. Think about safety issues, how to place it so that the child cannot reach sockets, table lamps and other electrical appliances.

Many parents will ask, why is this necessary? What is the use of decorating the bed if the child is already not deprived of toys. There is a point. Decorating a baby crib has not only aesthetic, but also corrective functions. Your baby spends most of the time in bed, and decorations will help develop his attention and memory.

Instructions

1. While the child is small, buy a four-poster bed. A graceful canopy will serve to protect the baby from insects, light and permissible drafts. But as soon as the baby has grown, ruthlessly get rid of the canopy. The child will not understand the threat and may, clinging tightly to the fabric with his hands, bring down this entire colossal structure on himself. In addition, a fabric curtain serves as a wonderful “dust collector,” and dust, as is well known, causes allergies. Therefore, if you bought canopy crib 2. Decorate the headboard, if it is solid, with appliqué or, if you have the time and ability, paint it with comical animals. Just use water-based paints for this. They are non-toxic, odorless and therefore are best suited for use in a children's room. When the baby begins to relate more rationally to the world around him, he will like to look at brilliant pictures. Use these decorations for your baby's development in the future. Come up with fairy tales about the drawn characters and tell them to your baby at night. It is permissible that when a child grows up, he himself begins to invent stories about the heroes he loves. 3. Buy a mobile and hang it above the crib. Shiny, spinning toys will attract your baby's attention. Children really like rattles. You will also purchase special plastic toys strung with a strong elastic band. And hang it, attaching it to the sides of the bed. 4. How to decorate a crib ? The easiest method is to buy beautiful bed linen. You can, as desired, fantasize at length on the topic of decoration, but without excellent linen, the appearance of the crib will still not be very aesthetic. Do not purchase duvets and pillows for a small child. Fluff can cause allergies. Your own imagination will tell you how to decorate a crib . Show off your crafting skills and your little one will fall asleep in the most authentic bed ever made.

There is only a little time left before the baby is born, and you are happy to prepare everything you need for him. Among every dowry for a baby, one of the main places is occupied by a crib. Try to design it in such a way as to make the baby’s stay in it comfortable and harmless.

You will need

• - Crib;
• – comfortable location;
• - orthopedic mattress;
• – canopy;
• – protective sides;
• - bed sheets;
• - Baby blanket;
• – musical mobile;
• – a toy on a clothespin;
• – hanging rattle toys.
• –

Instructions

1. Give preference to a crib made of natural materials, better than wood (pine, birch, oak). The slats of the bed must be located at such a distance from each other that the child’s hand and head cannot get stuck in them. It would be cooler if the sides of the bed have an adjustable height, which you can change as your baby grows. 2. Choose a suitable location for the crib. It should be clear and warm. The crib should not be located near the radiator, window or front door. If you decide to put a crib in your bedroom, place it near your bed, so you can easily keep track of your baby and get up to him when necessary. 3. For a crib, choose an orthopedic comfortable mattress. It should hold its shape perfectly and not sag under the baby. This is a necessary condition for the correct formation of the skeleton. Cover the mattress with oilcloth or wear a special waterproof mattress cover to avoid getting wet. 4. There is a special canopy for a children's bed. It is made of mesh or light fabric. In addition to the aesthetic result of comfort, a canopy can protect the baby from mosquitoes or air flow from the window. Just don’t forget to wash it regularly, because the canopy collects all the dust. 5. Cover the walls of the bed with soft protective sides so that the child does not accidentally hit himself. Give preference to pastel colors with simple patterns. You should not choose too shiny sides, they strain your eyesight and affect the nervous system. 6. Cover the mattress with an ironed sheet. It would be great if it had rubber bands on the edges. Do not use a pillow for babies under one year old. Instead of a pillow, you can put a soft diaper. A baby blanket should be light and small. If the room is warm, you can get by with a diaper or a soft, huge light towel. At cool temperatures, a flannelette or light synthetic blanket will suit your baby. 7. Place a music mobile above your baby's bed. Toys that move smoothly to music will calm your baby or help him get distracted if you leave the room. Attach a toy with a clothespin to the side of the bed. While awake, the baby will be able to look at it and try to reach it. To stimulate the development of baby's movements, attach hanging rattle toys in front of the baby. They must be positioned so that the baby can reach them with his hands if desired.

A newborn baby spends a lot of time in a crib. If the baby sleeps with his mother, then he plays in the crib, learns to stand up, leaning on the sides, and tries to walk. And if the crib serves as an extraordinary place for sleep, then it should be very harmless for the child.

You will need

• – children’s mattress;
• - blanket;
• - pillow;
• – children's bedding;
• – oilcloth;
• - diapers.

Instructions

1. Buy a crib and at the same time take care of getting bedding. First of all, choose a children's mattress, one that matches the size of the crib. It would be cooler if the material from which the mattress is made is latex foam with holes that allow air circulation. A coconut mattress, despite its superior properties, can cause allergies in a child. 2. Choose bedding for the crib made of cotton or calico with a stable pattern. The sheet and duvet cover must withstand high washing temperatures, which is important when disinfecting linen. Give preference to a fitted sheet - the elastic bands will prevent it from sliding off the mattress. Stock up on several flannel diapers and change them as often as possible. 3. Lay a sheet on the mattress, put a medical oilcloth on top or any other one that will not rustle or slide. If necessary, secure the protection from getting wet with rubber bands. Cover the baby's crib with a warm diaper. 4. Place a light, warm blanket in the crib . If necessary, use a children's sleeping bag instead, but in no case a synthetic blanket. In hot weather, cover the child with a sheet or put him to sleep in a thin shirt. 5. Place a folded diaper or a flat pillow under the baby’s head. The baby does not need any orthopedic pillows. Ruffles, ties and lace on the pillowcase will only disturb the child, so remove excesses and decorations. 6. If desired, decorate the crib with colorful bumpers and a canopy, but remember that these items collect excess dust and trap air. Newborn babies do not toss and turn violently in their sleep, so in the first few months do not cover the headboard and sides with protective devices. No matter how you make the crib , remember that it should be safe and comfortable for the child in it, then the baby’s sleep will be sound and idyllic. Note! A “breathable” mattress will allow the child to breathe, even if he turns over on his stomach and buries his nose in it. A sleeping bag secured under the baby’s arms will prevent the baby from opening up and freezing at night.