The key to cozy and warm housing is natural raw materials based on natural components. One of such representatives of finishing materials is considered to be lumber. They are aesthetically pleasing and give the room a unique style.
To further reduce the cost of the design process, calm pine lining is used. Let's consider what it is, what it is intended for and where it is used, as well as its advantages.
Shtil lining is a modern finishing material in the form of a panel, which is successfully used for finishing the internal vertical and horizontal planes of a room. Looks good when decorating residential and office premises, in particular their corridors.
On websites about finishing, you can look at photos of Shtil lining and analyze how it looks in one or another combination. It is thinner than other lining.
When assembled on a plane, there are no recesses at the joints. As a result, you get a flat plane without visible traces of fastening.
Standard sizes
There are standard sizes of Shtil lining, which are slightly larger than other models. Let's take a closer look:
- domestic versions have a profile width from 90 to 150 mm and a thickness from 12 to 25 mm;
- foreign versions have a profile width from 80 to 140 mm and a thickness from 12.5 to 21 mm.
Their length varies from 2 to 6 meters. This allows you to make a smooth and solid plane.
Pine wood
Pine lining “calm” occupies a special place in the line of building materials due to a number of advantages.
- Its woody structure allows for easy absorption of dyes, waxes and varnishes.
- Like other types of coniferous materials, it has antiseptic properties.
- The wood has a dense structure.
- It has good heat capacity and density.
- Has excellent soundproofing properties.
- It is resistant to alkaline solutions and acids, therefore it is used in the manufacture of pipes and containers.
- Able to signal wear with a characteristic crackling sound.
Pine lining is used for cladding various rooms, with the exception of those in which the microclimate is unstable. Due to the fact that pine wood contains a large amount of resins, it is used for exterior cladding.
Moisture resistance of lining
Considering its design capabilities, we can say that this product is significantly more resistant to moisture than its conventional counterparts.
On the reverse side of the profile it has shallow depressions that are longitudinally located. They provide ventilation for the entire structure, minimizing the occurrence of various fungi and mold.
Classification
When selecting materials for finishing, you should keep in mind that all lining differs not just in the type of wood, but also in the grade (quality of the material).
- Premium (extra) class - lining made of larch, aspen, cedar and other wood is the most expensive material in comparison with other categories. Such boards are perfectly flat, free of chips, smooth, and free of cracks and other defects. This finish is ideal for expensive interiors.
- And the class - it should be admitted that at an affordable price, boards of this class can be no worse than “extra”. When purchasing, you should pay attention to the external parameters of the products, and the core can only be 20% of the board area; non-through cracks with a depth of several mm are acceptable. There should be no falling out or black knots.
- In class - this material has visual flaws, these are resin pockets and black knots. The presence of slight blue stain and rot is allowed (up to 10% of the total area). There are no more than 3 cracks, dents and small chips per linear meter.
- C class - this finishing material is much cheaper than others, but its quality is not the best. Some manufacturers sell defective boards under the guise of C class. In any case, this is a material with a huge number of through cracks, knots, dark cores and falling out knots.
Now that we have figured out what it is, you probably understand that such a finishing material is ideal for finishing external and internal wall surfaces. It is visually beautiful, completely natural and durable. But to get the best result, you should take your choice as seriously as possible.
Angarsk pine
This tree grows in the taiga, in an ecologically clean environment, and is characterized by the absence of any negative chemical compounds. Calm lining made from Angarsk pine has the following features:
- able to withstand significant temperature changes;
- has low thermal conductivity;
- has increased strength;
- extremely minimally susceptible to decay;
- is widely used for cladding walls, ceilings and doors;
- this material “breathes” and emits a fresh forest aroma;
- Helps purify indoor air.
What is the difference between Eurolining?
In the production of this material, deciduous and coniferous trees are used, so installation is possible even in a bathhouse or sauna without danger. Working when decorating the ceiling and walls is quite simple and convenient; you don’t need any special tools or skills or knowledge for this.
Fastening is carried out using a tongue-and-groove system; accordingly, there will be no gaps after installation. To protect the materials used, you can use wax, varnish, and paint. You can refuse to carry out processing altogether, but then the material will last less.
What are its advantages:
- Environmental cleanliness.
- Easy installation.
- Good quality of sound and thermal insulation.
- Duration of use.
- Good resistance to moisture and fungus. Without taking into account the tenons, the eurolining received dimensions of 12.5 × 88 mm.
Decorative properties
The material has amazing properties when installed in vertical and horizontal directions. This makes it possible to visually manipulate space. There are possible options:
- light panels directed from bottom to top - visually increase the height of the ceilings;
- a dark panel that is attached across reduces the visible volume of the room.
There are many options for improvisation. With this material you can create the desired appearance of space.
Useful tips for the master
It is best to cut lamellas with a hand-held circular saw at high speed. This tool allows you to make an even cut without the risk of chips, cracks, or the blade moving to the side.
Treatment of wood with antiseptics, waterproofing agents and other protective agents occurs only after preliminary cutting and fitting of the lamellas.
The installation of sockets is carried out at the junction of the lamellas - this way you can avoid excessive torsion or cracks during cutting inside the board.
Many manufacturers coat their products with protective compounds before sale. This does not mean that you won’t have to apply an antiseptic to the slats - protection against moisture in a warehouse is noticeably different from antifungal protection in an apartment.
It is necessary to carefully select fastening material. Cleaver staples also differ in their characteristics. It is worth choosing wide brackets made of galvanized iron with 2-4 holes for self-tapping screws. High-quality fastening - durable coating.
Calm lining in the interior of any room is a noticeable plus for the atmosphere. Timely care and replacement of defective sheets will extend the life of the repair in the room.
Advantages of lining
This lining has a significant variety of shades and does not require additional painting. It is quite dense, which gives it a long service life. It is distinguished by its advantages:
- attractive aesthetic appearance;
- possibility of condensate drainage;
- minimum amount of waste;
- ease of fastening;
- fixation strength;
- wide variety of sizes offered;
- sufficient strength;
- affordable price.
Scope of application
To create the cozy atmosphere characteristic of a wooden house, there is no need to build it. Lining for interior decoration can easily cope with this task.
Covering walls with panels allows you to create a complete canvas; it’s not for nothing that lining is also called “wooden wallpaper.” Simple installation and a smooth surface of the material allow the product to be used for covering ceiling surfaces.
- Design solutions in interiors where only a small amount of expensive wood is used, as separate insertion elements, in combination with cheaper lumber - all this refers to the “calm” lining. The product is recommended for use in cladding rooms with stable microclimate parameters.
- It is recommended to clad saunas and baths with panels made of alder or larch. These rocks are resistant to high moisture content in the air, high temperatures and are not subject to rotting processes.
- Larch wood, containing antioxidants, has a beneficial effect on health, strengthening the immune system. Linden panels are distinguished not only by the uniformity of beige tones, but also by the aroma of honey they exude.
- Lining for facades, cladding of gazebos, verandas and balconies has good resistance to moisture and temperature changes. For external cladding, “calm” made of spruce and pine wood is suitable. In addition, these options have a very affordable price.
Having familiarized yourself with the material about the “calm” lining, you can come to the conclusion that the material is ideal in its diversity and versatility. The pricing policy allows both economical finishing options and expensive ones with high quality.
The possibility of use for interior and exterior cladding, visual appeal, environmental friendliness, durability and ease of installation make it simply an irreplaceable ally and favorite in the process of home improvement.
However, to get a good result, you need to carefully study all the properties and take the choice seriously. And the effect in the end will definitely satisfy, because “calm” lining is a material for those who value comfort and quality.
Buying lining
When considering the question: where to buy Shtil lining, you should go to specialized sites offering its sale and familiarize yourself with the services offered, pricing policy, delivery options and conditions. It’s quite easy to choose the best option and get the long-awaited result.
As you can see, Shtil lining is a high-quality material that is used in modern finishing and has a number of undeniable advantages. Use this high-quality material and create a comfortable and cozy environment in your home!
Types of finishes
Swiss chalet
This design style is best used in a suburban area with a home of any size. We will need a wide lining 6 meters long to decorate the roof. A sloping roof with large angles of inclination and a visor is the central part of the exterior. This element not only creates the feeling of a house in the Alps, but also serves to protect the room from negative environmental factors.
Traditionally, a Swiss chalet has 2 floors with a balcony, or it can be a one-story building with an open terrace.
Inside the house, the interior is also made using lining of various lengths. The walls and ceiling are sheathed using lumber.
Provence One of the most popular interior styles, used both in private homes and city apartments. Coffee shops and small restaurants often prefer this design. The use of living textured material - lining in large quantities - is the basic principle of constructing the Provence style. Lumber, as a rule, is painted in light pastel shades - olive, pale pink, soft lilac. Lightness, a feeling of comfort and homeliness, the absence of unnecessary decor and furniture - true Provence style.
Country This type of design direction is most often used for one space in a living room: living room, kitchen or bedroom. The main goal is to create a rustic, sophisticated style.
Simplicity, but with moderate gloss, comfortable furniture, but without modern trends, and necessarily finishing the walls with high-quality lining (it is advisable to use the highest grades and lumber from expensive tree species).
The interior styles given as examples are far from the only ones. With the help of lining of various lengths, you can make your dream of comfortable, cozy housing come true for any financial opportunity.
