Lining in the interior 2022: TOP-80 best ideas with photos (+ types and tips)

Photo: interiordesign.net

American

You can use American-style lining, or “American”, in the interior. Although it is used more often for exterior decoration, as it is laid overlapping and effectively protects the walls of the house from precipitation.

Photo: wolfweyr.com

More information about types of lining

On the modern market of finishing materials you can find coatings made of wood, plastic and metal.
The most popular, of course, is wood siding, which is environmentally friendly, provides additional thermal insulation and looks great. Since wood siding is the most popular, we will talk about it in more detail below. The second most popular option is plastic lining. Conscientious manufacturers use high-quality plastic for its production, resistant to various negative influences: low and high temperatures, high humidity, and so on.

This coating is perfect if the room has a constantly high level of humidity. Most often, plastic siding is used on balconies, loggias and bathrooms. In some cases, external finishing is possible.

Metal cladding is not in great demand, but it is also used for finishing some rooms and external cladding of various structures. Metal panels are the most durable, so their scope can be very wide. However, due to its unpresentable appearance, such a coating is not used in all works.

Frequently asked questions

Some questions that arise for untrained home craftsmen are exactly the same. You can answer them immediately, without waiting for them to appear:

When is it better to paint the lining, before or after installation?

Sometimes the material changes its linear dimensions slightly, and the gaps between adjacent lamellas become wider. If the lining is painted and finished before installation, such changes will remain invisible. This is especially important if dark colored fabric is used.

Is it possible to install panels with glue or do you have to use clamps?

Adhesive mounting can only be used when installing on a wall. Ceiling decorative panels have to be fastened in a more reliable way - with self-tapping screws directly through the slats, onto clamps, or a combination of several methods at the same time.

How to choose the trim color?

This is a purely individual question, determined only by the personal preferences of the home owner. The only recommendation would be to follow the basic rule - the larger the area of ​​the cladding, the lighter it should be. This way it is possible to reduce psychological pressure and the dominance of the cladding fabric.

How dangerous is the cladding fabric in terms of fire?

The lining itself will not ignite. If there is a fire in the room, the canvas will burn, but it will never cause a fire. However, before installation, you can impregnate the material with a fire-retardant compound to prevent combustion.

Should the lamellas be glued together when assembling the canvas?

This should not be done. Despite the apparent strength and reliability of this installation option, the result will only be the impossibility of partially disassembling the canvas for repair or replacement of an individual element.

Types of lining profiles

Manufacturers produce different types of profiles, which differ in the type of locks, the size and shape of the back and front sides, and the type or type. If you are planning to decorate the interior of your car, it is better to choose the design of the room in advance - this will help you decide on the selection of the profile.

Standard class plate is often suitable for indoor use

Standard. The basic profile is trapezoidal, with the front side parallel to the back. There are two cross cuts on the back to prevent transportation. One of the edges of the rail is equipped with a corner, the other with a protrusion, together they form a “spike groove” type connection.

Eurolining is one of the most popular types of lining

Eurovision. They are distinguished by the presence of a corner connection and a longer “shelf”, thanks to which the joints between the panels are more noticeable. The home's interior features European millwork, which benefits from the clever design of the spires. There are vents at the rear of the track that are designed to detect excess moisture and prevent crown formation.

The smooth lines of the Softline car distinguish this type of profile from others

A fine line. This type of implant has rounded corners, which reduces the likelihood of runs and netting. But due to the elongated “shelf”, the seams between the panels are very noticeable. Softline Carrier is recommended to be used to decorate bathhouses and canopies.

“Brick” panels are widely used not only for finishing bathrooms and saunas

Calm. The characteristic profile of the profile is the absence of a bevel at the tenon, which makes the joints almost invisible after installation. The effect was used for cladding the façade to simulate “under bruises.” This allows you to increase the thickness of the panels - up to 25 mm.

The Calm Button is one of the most popular profile types.

Landxayc. One of the most expensive types of profiles, since their front side is subject to additional processing to create complex options. Also, using hot stamping you can get a panel with the effect of wood carving. A Landheads vehicle was used for interior decoration of the premises.

Blockxayc. The front side of the profile is rounded, which in its finished form will create the effect of wrapping cylindrical logs. Most often used to decorate the facades of buildings.

Imitation “under a cylindrical barrel” allows you to create original interiors

America. The main difference between the profile is that the back and front surfaces are not parallel to each other. The difference in thickness can be 6-8 mm, and the slope can be 5 degrees. 3a this creates the effect of installing boards on the outside or simulating cladding with siding panels.

American

Video description

The video explains how to choose a lining and what technical characteristics to pay attention to:

Profile Features

The technical characteristics of the lining are changing all the time; manufacturers, modernizing equipment, produce new samples that differ from each other in different cross-sectional profiles. Taking into account this indicator, the assortment includes:

• eurolining;
• lining-calm;
• block house;
• soft line;
• American.

Eurolining for interior decoration Source les-archangelska.ru

Lining material and its advantages

At the moment, not only wood, but also its waste (MDF) is used for the production of cladding. Plastic models are also popular, attractive with their colors and low cost. We invite you to familiarize yourself with each of the options, which will allow you to choose the optimal solution, taking into account the properties and main characteristics of the materials.

Wood

The wooden carriage has found wide application in both external and internal decoration. The room, upholstered with a carriage made of natural wood, looks attractive and is easy to breathe in. The material is suitable for upholstering walls, for decorating a canyon or a bathhouse. But for rooms with high humidity, it is important to choose the right type of wood - only in this case will it last long enough.

Natural wood fills the house with a natural atmosphere

The wooden cart consists of the following types:

Pine is a light and resinous wood that has bactericidal properties and is resistant to pests and scales. Suitable for interior decoration of residential premises; for these purposes it is better to take a dryer, which is prepared in winter. It is not recommended for use in a bath, as resinous compounds are formed at high temperatures.

The ideal choice for the bedroom is pine.

Spruce is a tree similar to pine, but has a lighter shade. In the sun's rays, the coating quickly darkens, so the spruce machine is more suitable for dividing rooms, it is good for the rest of the day. A distinctive feature of wood is its high resonant properties, due to which the material is often used to decorate sound recording rooms.

Lightweight dry wood suitable for carpentry

Fir is a material that is often sold as spruce or pine and is difficult to distinguish by color. But there is more resin in a letter than in a spruce machine, and there is much less resin. The material retains its bactericidal qualities for a long time; it is excellent for decorating a balcony, house, veranda or loggia, where they are often found in other cities.

Excellent reliable characteristics make the letter an ideal material for decorating a loggia

Dub is renowned for its robust features. The wood tone is painted into the center of the dock, providing great design opportunities. But it is not recommended to divide the interior with a double wall - it will be too sentimental. Keep in mind that mold and rot rarely throw the cart out of oak, and wood is very easy to infest with insects.

Oak Wagon is one of the most useful separate materials

Sheet is one of the most reliable materials, which is not afraid of insects and is little affected by the brake. Thanks to its exquisite texture and wide range of colors, wood allows you to achieve an interesting effect in the interior. But if you select it based on the shadow, you can select it based on the shadow. Pepebird is much cheaper. The resin content in the material is high, but it comes out in a short time.

The high aesthetic properties of the cart crossbow justify its high price

Birch is the raw material for creating light and the aesthetics of a beautiful table. Its advantage is that the car is resistant to direct sunlight. But there is something less: wood is easy to free, so it can only be used in dry, warm and well-ventilated areas.

Birch groove looks attractive, but don't make any effort to resist bending

Ocin, alder, linden - their wood is suitable for cutting the core of their premises: the reason is poor mechanical safety. But the carriage of these tree species is widely used for lining saunas and canyons, as they emit high temperatures that are beneficial to health.

The carriage-covered attic provides a warm and welcoming atmosphere

MDF

The material only indirectly belongs to the category of wood: the raw material for making a car from MDF is inconspicuous wood waste or wood dust. After special heat treatment of the materials, the space will take up a lot of space, and the light weight and acceptable environmental characteristics will allow you to take advantage of this space.

The service life of an MDF car is not so long that it can be compensated for by a number of facts

The key advantage of the material is its wide range of colors, which will allow you to perfectly reproduce different images and facts. Manufacturers produce profiles imitating marble, stone and other materials, expanding design possibilities. I can popularize an MDF car by buying drivers with a small budget for repairs.

Large selection of cars in different colors and colors to suit the consumer's eye

Plastic

Plastic profiles or ATS panels fit well with wooden counterparts due to their low cost, ease of installation and durability. The plastic machine is suitable for both internal and external cladding - the panels can be used in any room. In this case, it is necessary to understand that the aesthetic characteristics of an automatic vehicle are much lower than its wooden counterparts.

Auto Plactikova: the ideal solution for covering a balcony or loggia

When choosing to use plastic panels, keep in mind that the material does not work at high temperatures and is easily deformed and burns out. Recommended for use in rooms with high humidity, such as in a bath or on a balcony.

Shiny plastic panels look attractive, but quickly lose their shine.

How to use lining for finishing

There is no single classical finishing method. Due to the versatility of wooden boards, they are used both for finishing walls or ceilings, and for decorative purposes.

Ceiling

If you want to diversify your interior, and suspended and simply plastered ceilings look banal, lining is your option. This coating is quite inexpensive, but requires special treatment to ensure its durability. Cover it with a special compound that will protect the coating from burns and moisture.

Walls

Some people believe that decorating walls with wood is only suitable for private houses and cottages. On the one hand, the closer you come to nature, the more natural the wood paneling will be. In addition, natural styles are often used in the design of summer cottages and country houses - country, chalet, Provence. Wood looks harmonious in them.

On the other hand, no one forbids giving the apartment the charm of a dacha. For urban conditions, a painted coating is most suitable. With its help you will create a unique and cozy interior.

In the photo there is yellow upholstery in the bedroom behind the headboard

Window slopes

Plastic slopes reduce the cost of finishing and are not suitable for all interiors, so in the interior of apartments and houses they often resort to finishing windows with lamellas.

The panels are attached in two ways: on the lathing (the same option is used for walls and ceilings) or on foam plastic.

For zoning

Zoning a room is an important part of creating a competent interior. And one way to highlight an area in a room is to use different finishing options. For example, wood panels painted in different shades of brown were used in this living room to cover the walls and ceiling of the sitting area. Their combination with the dark gray walls of the main area looks elegant and impressive.

Photo: Instagram corp_snab

As a decorative element

From lining you can make unusual decorative elements for any room - be it a living room, a nursery or a bedroom. For example, in this apartment they decided to decorate the walls of the children's room with mountain peaks.

In this living room, the upholstery is made in the form of panels on the wall behind the sofa and the same decor on the ceiling. Special wood treatment gave the effect of aging. This adds a certain charm to the interior of a country house.

But the upholstery was used to decorate the TV area in the bedroom. It was laid diagonally to highlight this section of the wall.

Furniture finishing

An unexpected use of upholstery is in decorative elements of furniture. For example, part of the bed was made of wood panels.

When choosing a material for wall cladding in any room, always pay attention to its advantages and disadvantages and study examples. We have prepared for you a summary table of the pros and cons of the finishing coating.

Advantages and disadvantages

Varieties

Lining is a material that is produced by a huge number of manufacturers. In Soviet times, the quality of the lining depended on the type and type of wood used as raw material. Today, splice lines are used that produce higher quality material without flaws, knots or rotten areas.

The two main types - regular and eurolining - differ in the quality of the material and the presence of defects - since European quality requirements are stricter, eurolining looks much better and does not have the same shortcomings as regular material.

In addition, types of lining today differ in the shape and appearance of the front surface:

Blockhouse (imitated log wall)

American (laying boards overlapping)

Softline (in cross-section this is a regular eurolining, but with softened corners)

Calm (there is no deep chamfer along the tenon line, the connection of individual lamellas is more dense)

Landhouse (the relief of the front side has a figured element that makes the canvas more attractive)

Double-sided lining (there is no reverse side, the slats can be turned either side out)

In addition, the material is distinguished by grade. It is determined by the number of flaws on the front side of the lamellas. If the lining is made from blanks that have passed the splicing line, the quality automatically increases to the highest levels.

Attention! There are also types of lining made from MDF or plastic. These are wall panels that do not have a complete list of properties of wooden material and are used only for decorative purposes.

Options for room design using lining

A modern approach to interior design, combined with a new look at the possibilities of cladding, allowed designers to develop many solutions. Today, this material is used for cladding not only walls, but also ceilings, used in residential premises and decorated in different styles. There are design solutions where the coating acts as a floor covering, albeit for a small part of the room.

An effective use case is to lay the slats horizontally. The canvas has an unusual and very elegant appearance, providing an unusual and attractive surface appearance.

At the same time, it is not customary to cover the entire room with clapboard. Only one wall is cut out (very rarely - two adjacent ones, if their total area is small). Most often, only a small section of the plane is sheathed: they create a decorative panel above the head of the bed, create a platform for hanging a TV, separate a section of the ceiling slab for installing a chandelier (or group of lamps).

Many users look at the interiors of different rooms - what the lining looks like in the bedroom, kitchen or living room.

However, it is more correct to take into account the laying technique, type of processing and size of the canvas. This determines the decorative effect and allows you to create sections of walls or ceilings that attract attention and decorate the room, regardless of its purpose.

Living room

The coating goes well with wallpaper. If you make a panel at the bottom of the wall, the room will turn out to be especially cozy and welcoming.

Everyone is already tired of boring, monochromatic living rooms. Let's add some color to the interior using lining and play with contrasts? For example, you can trim the walls with clapboard and paint them in an unusual color (complex dusty shades look most interesting, as in the photo above), and leave the floor or ceiling white. Fresh and unusual. The reverse scheme also works: light wallpaper - snow-white lining.

Kitchen

This material can be used in kitchen decoration: both on the walls and on the apron. Of course, when laying the cladding in the work area, you need to take care of additional processing of the wood. This coating will fit into a modern kitchen design and will withstand country style.

Inside the kitchen, you can cover everything with clapboard or just focus on the dining area. The lining also looks beautiful on a kitchen apron. Do you want problems with cleaning? Treat with an antiseptic and coat with moisture-resistant paint.

In a country-style kitchen, an untouched coating looks harmonious; in other cases, it is better to paint it. For the Scandinavian direction, white, gray and beige colors are suitable, for Provence - delicate pastel colors. For a sustainable look, choose brighter shades such as green or brown.

Hallway and corridor

In panel houses, corridors are often narrow and uncomfortable; Horizontal paneling of short walls will increase the space and make it more pleasant. On long walls, attach the slats vertically or diagonally. The panels look interesting: for example, from the boards you can create the outlines of mountain peaks or a city landscape.

An added bonus in the hallway: you won't need special hardware to hang an extra hook or shelf.

Children's room

The use of environmentally friendly materials is especially important for children, so wooden panels come first. In addition, its variability and ease of processing allows you to create extravagant patterns on the walls and ceiling, which is a plus in the design of a nursery.

Bedroom

The most effective placement of upholstery on a bedroom wall is behind the bed. Accentuate a wall or adjust the geometry of a room with matching stripes.

An interior with a natural tone board in a bedroom with white furniture looks fresh and will remain relevant for many years.

The photo shows a country style bathroom design

Balcony

Wooden panels are very popular for decorating the walls of balconies. Budget-friendly, stylish, can be varied with paint - these are the factors that determine such a high demand for this material. Also, designers often use lining in the design of balconies and loggias.

Bathroom and toilet

Wood materials have low moisture resistance - that's a fact. But thanks to special impregnations, they can be used for finishing walls in wet rooms, for example, in bathrooms or toilets.

Coloring ideas

In order for the material to look good, you need to show your imagination. You can create an unusual texture using slats of different thicknesses. The panels must be secured in such a way that there is a narrower space between them.

You can alternate in any order, for example two narrow and one wide. A single-color coating or various shades is used . The contrast creates an unusual effect in the room.

Brushed

In order for the design to be embossed and stand out, the brushing method is used. This method is used if new lining is used. If there is painted lining, then the main paint is removed. The lath, which has been brushed, highlights the wood texture.

In addition, the material should be coated with an antiseptic and dried.

Under bleached oak

The bleached oak lining looks great. White wood is used in rustic and Scandinavian interiors. It is necessary to preserve the structure of the wood and apply the coating in a small layer.

Attention

The stain is used under the name “bleached oak”. To create the effect the layers must be very thin.

A little paint is applied to the coating . In this case, stain is not used, as it is quickly absorbed. Wooden surfaces are impregnated with paint without drips.

To prepare, dissolve the powder in water or denatured alcohol.

Preserving wood texture

A wooden structure requires additional protection . Microorganisms and harmful organisms can negatively impact the environment. The clear finish highlights the wood grain. Painting while maintaining texture creates a protective barrier against mold and mildew.

Certain types of paint create a unique texture for any client. This process does not require a lot of costs and even a non-professional can handle it.

In order to add shine, you need to apply the following types of processing::

1. Varnishing.
2. Glaze.
3. Polishing.
4. Waxing.
5. Working as a stain.

The creation of texture is realized with transparent paints . The compositions include various oils and natural ingredients. Pests can damage wood. For protection, drugs are added that perform a preventive role.

Painting can be used on any type of wood. With the development of the painting industry, there are new multifunctional paints:

1. Antiseptics.
2. Oils.
3. Light stabilizers.

Additives are created to maintain natural color and water resistance.

How does installation work?

Everything is in order.

The order is completed. Without it, channels appear where moisture accumulates, moisture rises in the room, fungus may develop, and the wall will begin to rot. Therefore, repair work is carried out according to all rules. Even if the walls in the house are perfectly smooth and made of wood yourself, before covering the wall with clapboard, you need to install the sheathing.

Forced ventilation ducts are installed in clapboard wall decoration (they are specially cut from boards). No turning anywhere. It should be made of wood, just like the panels. This is important because the material acts as a shock absorber. This is especially important when using minimal materials on the walls. The spaces (deformations) between the wall itself and the boards perform the same function. Connectors have a diameter of 5 mm or more.

For example, it is not uncommon for wooden boards to be placed on steel sheathing (for example, when installing drywall). After a short time, the material begins to expand and cracks appear. But after removing the baseboards a few years after installation, it turns out that the smooth surface of the wood lathe is only slightly worn around the edges. Whatever type of turning it is, the basis for its installation is the same for everyone - the turning strips should be placed strictly perpendicular to the boards.

Don't forget about the bars around the edges:

• The ends of the boards should not hang down;
• When installing the cladding diagonally, its sheathing must have a frame (solid);
• The thickness of the planks is from 20 mm, width - from 30 mm;
• The size of the beam installation step is at least 4 boards wide;
• At the ends, the attachment points are placed at a distance of 50 mm.

Types of installation

Of course, before you start covering the walls with wooden boards with your own hands - an example in the video, you need to decide on the type and direction. Be it horizontal, vertical, diagonal, herringbone, diamond or brick, mixed.

Horizontal installation is considered a classic (in Russia this is true). It has a positive effect on expanding the space of the room. A small drawback that can be avoided (when installing the grooves are directed downward) is dust and moisture that accumulates at the joints of the boards. Following this recommendation, start styling from the top.

Vertical placement is most popular among Finns. Makes ceilings higher. This effect is especially important for low rooms. Installation of wall decoration with clapboard begins from the most difficult angle.

Diagonal (and mixed) installation is distinguished by directionality and aesthetic appearance. Installation is much more complicated than previous options. The interior, decorated with wood of different species and shades, looks especially bright and unusual.

It is easier to install wooden panels on walls horizontally using planks or vertically.

The vertical version of clapboard cladding is simply necessary for rooms with high humidity, places where frequent condensation is possible (bathroom, kitchen, etc.). Since the horizontal method will not protect from excess moisture. The type of installation, when installing boards vertically, determines whether the tongue and groove will be cut, in what place, and for how long.

When installed horizontally, the end result looks very attractive. Here the lining is installed, pointing the ridges upward to protect the grooves from water accumulation. This will prevent the appearance of rot, microbes, and fungus in the future. When installing the first bottom panel, the side of its groove is cut off. This removes the pocket that will collect moisture.

The least used option is the diagonal siding placement option. It is more difficult, with a lot of material waste. From the point of view of beauty, it is practically no different from previous installation methods. Decorating the walls with clapboards with your own hands will add zest to the room.

There are shaped styles: herringbone - a little difficult, but possible. A vertical sheathing is required on which the pieces of material cut out according to the template will be attached.

A more complex lining is wall lining in the shape of a diamond. The rotation is made in the form of a cross in a frame. The rods are attached diagonally in its quadrants. The work that goes into installing diamond pavement is well worth it. The result looks incredibly elegant and expensive.

Choosing the method of installing the lining

There are three ways to attach the cladding to the walls: glue, nails and clamps. The choice depends on the operating conditions and the condition of the walls.

You can stick the lining in a dry room on smooth walls. If it is thin (13-15 mm) and small in width (80-100 mm), this can only be done with glue. For larger sizes it is better to secure it with your nails, but you will need 30% less.

Wall cladding is not boring at all. This is an ideal finishing option for a wooden house.

You can also glue the coating to relatively flat walls, but only minor deviations are allowed. This trim panel is not very thick and will bend, but due to the natural elasticity of the wood it may tear into voids. Therefore, if the walls are not perfect, it is best to use a combination of glue and nails.

Types of cladding and accompanying profiles: Standard, Shtil, Eurolining, Softline, Landhouse, American, Blockhouse, Double-sided

Nails or screws can be used to attach the cladding either directly to the walls or to a lathe. The second option is chosen due to uneven walls or the need for thermal, acoustic and moisture insulation. Nails can be driven into a tenon, groove or face (photo below right). The first option is called secret, the second - traditional. It is impossible to apply any coating to the tenon/groove, but only some types of it (with sufficient protrusion/recess dimensions). And this option is also only available for dry residential premises.

Methods of fastening the lining: with clamps and self-tapping screws

Clamps (or strips) are special fasteners for hidden installation of corrugated moldings (photo above left). Some types of cladding fall into this category. If the material you choose has a large, strong tongue/spike, it can be secured with clamps. These mounts are usually attached to the lathe, but are also possible on a plywood wall.

How to create a sheathing for fastening lining

Preparing walls for cladding is the most painstaking process. You'll have to tinker with creating a custom design. General recommendations:

• Treat the wood with fire-resistant impregnation and antifungal agents.
• Make sure that the slats are positioned strictly perpendicular to the decorative boards.

• it is necessary to maintain a uniform distance between the rails, the pitch of which is 40-50 cm.

• Leave some space between the floor and ceiling. This recommendation is especially relevant for wooden houses that are constantly subject to shrinkage.
• It is necessary to carefully check the uniformity of installation of the frame; for this, use a plumb line and a spirit level.

• If a gap has formed between the slats and the wall, then it must be filled with prepared forms.

Important! The design of the machine allows you to equip the walls with an additional layer of insulation. Insulation is attached between the formed racks.

Choice of material for the frame

The frame for cladding mainly consists of two types of material - a wooden block or a metal profile.

Wooden block. The most popular material for the frame, because it is easier and faster to attach the sheathing to it. Suitable for dry rooms, for walls with minimal humidity. It is used not only in the interior, but also on facades. A cheaper option than a metal frame.

Metallic profile. Also a reliable frame option. The same metal profile is used to assemble frames for drywall. Suitable for any type of room. However, due to the high thermal conductivity of metal, it is necessary to take into account how cold the walls are. From a cold wall, the metal profile will transfer more cold to the front surface of the wall.

frame made of metal profile

As in the first case, in the second case it is recommended to insulate the walls inside the frame with special materials to fill the gap between the rough surface of the wall and the lining.

Calculation of material for sheathing lining

To calculate the required amount of timber or profile, you should decide in which direction the platband will be mounted.

The cladding is mounted in four directions:

• Vertical
• Horizontally
• Diagonally
• Mixed method

Find out more about these areas below in the article.

vertical, horizontal and diagonal slats

The most optimal step on the wall, between frame profiles (bars) should be from 40 cm to 60 cm. A profile must also be fixed along the perimeter of the wall or ceiling; this should be taken into account in the calculations. Having measured the dimensions of the sides of the wall or ceiling, taking into account the step between the rotary strips, draw a grid of your frame on paper and calculate the total length of the profile (beam) you need. Metal profiles and strips are always bought and sold in specific sizes from 1.5 meters to 2.5 meters depending on the manufacturer. Dividing the total length of the material by the length of the profile will give you the required amount of material.

If the profile is installed on hangers, then their pitch along the entire length of the rod is also from 40 to 60 cm. As a result, a rod 240 cm long will require 4 hangers, when installed with a pitch of 60 cm. For each hanger, 2 to 4 dowels are required , if you are attaching the frame to a stone wall. And from 2 to 4 wood screws for attaching the rod to the hangers. To secure a metal profile to hangers, you need to purchase metal screws, which are commonly called “bugs.”

Some laying rules

In order not to spoil the finished repair, certain rules are followed when installing the coating:

• Do not install directly on damp and porous walls or sheathing;
• The wall must be properly prepared;
• The best option is cement plaster;
• If the room is dry, then the walls are smooth and plastered - the bars are fastened with EU staples (used for drywall). These are perforated plates.

To ensure that everything was done expertly, the smoothest bars were chosen. The brackets are attached to the walls, the central plank is installed (placed first), along the edges of which the brackets are folded, and the ends of the plank are fixed. Next comes the bending of the intermediate brackets, the bar is completely assembled (without deformation). Subsequent planks are aligned along the central one, located precisely in this plane.

The safest way to prepare walls for cladding is to make a vapor barrier. For some rooms this is extremely necessary (kitchen, sauna, corridor, etc.).

Do-it-yourself clapboard wall decoration requires maintenance.

The wall must be completely flat, the insulation on top must be foil side out. The insulating material (on a special tape) is laid with an overlap (15 cm). Next comes the fastening of plywood siding (of the required thickness, at least 8 mm) to the wall under the bars. Then the rotating beams are attached to them.

This results in a well-ventilated space gap (between the lining and the insulation).

The basic principle of laying the coating is to start work from the most difficult small areas; ending with large, simple sections.

When the wall is already covered with clapboard, the baseboards are fixed. Covering walls with your own hands helps you save a lot and find interesting solutions. An analogy with laminate is appropriate here.

Coating

The final step is to coat the wood with special varnish and varnish compounds to give the material an appropriate shade and enhance its performance. For this purpose, several types of paint and varnish coatings are used:

Applying paint improves the aesthetic characteristics of the car

• Alkyd lasts for a long time, has a sour and unpleasant odor, but perfectly protects wood from moisture.
• Acrylic - quickly saves, due to which it is often used for indoor work. Attracts attention with a wide range of colors, well conveys the temperature range and the influence of humidity.
• Water-based paint is environmentally friendly and safe to use. It sits down quickly, there is practically no click. The main disadvantage is the high cost.
• Polyurethane is a universal coating that prevents wood from yellowing. Has rich translucent shades.

The sanded surface is processed after two to three cleaning cycles after installation is completed. The paint is applied in two layers: before applying the second surface, the tops are sanded to eliminate errors.

What nuances should be taken into account when working with lining

Sheathing is a board of varying thicknesses made from different types of wood. This material got its name from the place where it was first used. These are train cars whose interior walls are lined with small wooden boards. Today it is fashionable to cover the walls with boards in the bathroom, as well as in the sauna or gazebo.

It should be borne in mind that decorating walls with clapboards with your own hands requires an integrated and balanced approach. Please pay attention to the following details:

• Packaged cards should be stored horizontally on the mat.
• The humidity in the warehouse should be within normal limits.
• Do not store in direct sunlight on the packaging.
• It is important to pay attention to the expiration dates indicated on the packaging.

• The cost of 1 m2 of distilled linden, which can easily withstand temperature changes and high humidity, costs 500 rubles, and for wall cladding in the main rooms of the dacha, on average, you can leave a smaller amount - 300 rubles per m2. Important! The price of the material directly depends on the quality of the wood.

On a note! Wall cladding is purchased with a reserve of ten percent of the total area. It should be remembered that the width of each element is measured by the internal depth, so it is necessary to subtract 10-12 mm from the depth of the groove.

Painting rules

Coating panels with paint consists of several stages, the strict implementation of which will ensure a long service life of the painted surface.

Stage 1. Boards are checked for defects, all damaged elements are rejected. Damaged boards are useful for testing shades and determining the number of layers.

Stage 2. Panels that have been sorted are sanded to a smooth state. It's best to use a sander, but sandpaper attached to a piece of wood will also work. The sandpaper should be 240-290 grit. Grinding is carried out in a circular motion, processing the front side, groove, tenon. The inner part does not need to be processed.

Stage 3. The coloring composition is applied using a brush or roller. A small amount of paint is distributed over the bar in short strokes, then shaded.

Stage 4. After uniform staining, the boards are left to dry.

Stage 5. When working with varnishes or paints of a dense structure, you need to sand the surface again.

Stage 6. Apply a second layer of the substance and leave to dry.

To preserve the wood structure, pigmented oils, glaze or wax are used. First, the coloring composition is applied in fragments over the entire length of the board, then the strokes are shaded with a brush and left to soak in for 7-10 minutes.

To reveal the grain of the wood, use a soft cloth to wipe off most of the oil coating. Due to this, pigment remains in the furrows, but there is almost no pigment in the convex places. In decoration, this type of painting is used for the interior surfaces of buildings.

Modern paints and varnishes allow you to achieve the effect of a two-color lining with a pronounced texture. For the first layer, take a dark shade, for the second – a more saturated or white one. Cover the board with the first layer, leave for 10-12 minutes, and then wipe off the excess with a lint-free cloth.

Leave to dry for a day. Then cover with light-colored oil, after 10 minutes treat with a spatula, leave to dry for 24 hours.

There is old clapboard on the walls. How to clean it? Restore original color?

To do this, you can use a flat pumice stone or an abrasive wheel. As a result of sanding, the shalevka loses all its protective properties, which means it must be coated with an appropriate antiseptic solution, which not only plays a protective role, but also preserves all the properties of the paint.

Once the preparation is complete, the paint can be coated.

If you use classic paint, it will preserve the original upholstery pattern and will not require additional finishing. If the coating is opaque and completely hides the wood grain, to achieve an attractive and original look, you should take care of additional decorations, for example, elements for decorating windows and floors.

Interesting ideas for using lining in the interior

Bedroom at the dacha clapboard

We invite you to familiarize yourself with our range of materials

• Larch lining - Extra grade

  Wood Larch Width 96 mm Thickness 14 mm Length 3 m Qty.
  in pack 4 things. 1850 rub/m2

• Larch lining - Prima grade

  Wood Larch Width 96 mm Thickness 14 mm Length 3 m Qty.
  in pack 4 things. 1500 rub/m2