When carrying out all operations, it is much more convenient to use a table with calculations. It allows you to quickly complete the calculations and not forget about all the stages of calculating the area of the required material.
To find out how much fabric is needed, you should use a tape measure to measure the distance from the top of the place where the curtain will be attached (these can be rails or rings on the curtain rod (depending on its type, they are located on the rod) to the level of the intended tulle. Where the bottom of the tulle will be located depends on its type. The resulting number must be written down. Allowances for processing the edges of the material will be added later.
The “final result” is the width of the fabric that needs to be purchased to sew the product.
Carrying out measurements and calculations
“Result” is the length of the fabric that needs to be purchased to sew the product.
Knowing the width and length of the fabric that is needed to create the product, it is necessary to add a certain amount of material based on the processing of the edges. When calculating the final dimensions of the curtains, it is necessary to add 10 cm from each edge to bend the sides. Thus, to the previously obtained figure indicating the width, you need to add (10 * 2) 20 cm of material. The resulting figure will indicate the width of the fabric that needs to be purchased to create curtains for this window.
After measuring the length of the fabric, measure the distance from the beginning to the end of the window opening or the area that should be covered by the curtain. The size of the window is not the only thing that determines the size of the material needed to create a given product. A significant role in calculating the size of the fabric is played by the type of desired fastening and, as a consequence, the gathering factor.
To calculate the length of the material that is needed to create this curtain, add 10 cm to the previously obtained figure for the length of the finished curtain for processing the upper cut and 10 cm for processing the lower one. Thus, (10 cm + 10 cm) 20 cm + length of the finished curtain = length of the panel required for sewing tulle.
If the tulle in the window design is combined with thicker curtains, you can save a little and calculate its width by multiplying by a factor of no more than 1.5. In this case, the lack of tulle fabric on the sides will be reliably hidden by curtains, and in the middle you will get quite spectacular and lush waves.
Creating a cozy and comfortable atmosphere in your home is not an easy task. Every little detail is important in its decision, and even a seemingly insignificant detail can change the idea of an apartment for the better or for the worse. The choice of tulle is just such a final touch, giving the interior a special mood. Before purchasing it, it is important to immediately correctly calculate how much fabric you will need, i.e., decide on the width of the tulle.
For a particularly formal window decoration, you can use a factor of 3 (full filling). Tulle fabric will look airy and elegant, forming many folds.
The third point is the installation location
Each room creates a unique environment. For example, the bedroom should have a relaxing atmosphere. Therefore, it is necessary to buy tulles made of denser fabric with darker shades. They should be longer and wider than standard sizes to create a cozy and warm feeling in the room.
The kitchen requires a fresher environment as it hosts various activities throughout the day. Therefore, in this room you need to hang shorter and narrower curtains, with bright colors.
In the living room you can experiment without restrictions. The main thing is that the tulle matches the interior and does not look pretentious.
Window decoration with tulle: types of assembly
Where k is the assembly (filling) coefficient. For different types of assembly that the braid forms, it will be different:
For other rooms, it is worth choosing a cornice 20-30 cm larger than the width of the window frame, so that the curtains can move freely. So the length is measured from the cornice to the point you need. If the fastening system will not be a cornice, but rings, then you need to measure the length from the rings. In rest rooms, the recommended length is from the cornice and 3-4 cm to the floor. This will give the room comfort and coziness. There is one secret: in order to visually increase the height of the room, you should use floor-length curtains.
There are times when the ceiling in a room is not very level. In this case, you need to calculate the height on the left, right and middle. After this, use the average value.
If you use fabric loops on curtains, then the width is calculated by multiplying the width of the curtain rod by 1.5 or 2. If you plan to hang curtains on grommets or calculate the width of the curtain on a ribbon, then simply buy a canvas twice as wide as the length of the curtain rod.
Designers recommend using no less than 1:1.5 material. That is, with a window width of 3 m, the minimum amount of fabric for sewing is 3 m x 1.5 = 4.5 m. If you take a smaller amount of organza or veil, the appearance of the product will be more than modest.
How are these three options different and where are they used?
Tulle extending to the window sill is most often used in the kitchen, to cover window openings in the bathroom, and occasionally in children's bedrooms. At the same time, it is hung so that its lower edge does not reach the window sill by 1 cm. This allows the material to move freely and not touch the window sill. This arrangement of curtains is sometimes used in cases where the window sill is planned to be used as an additional shelf.
Curtains extending below the window sill look much neater and more beautiful than the option up to the window sill. In this case, the size of the curtain is calculated so that its lower edge hangs 10-15 cm below the window sill.
Tulles extending to the floor are read so that they end 1 cm above the floor. This indentation allows it to last longer, it gets dirty less and wears out more slowly. In some cases, for example, in large living rooms with glazed walls, curtains that touch the floor are used. This method of placing them is allowed only if they will not get dirty on the floor and children or pets will not have access to them. Moreover, the bottom edge of the fabric should touch the carpeting, but if the floor is not carpeted, then the fabric should not touch it.
How much to buy tulle for the window?
The width of sliding curtains is determined by the size of the curtain rod. If its length is no more than 1.4 meters, then the width of the canvas should be 1 length of the cornice, if up to 2 meters - 1.5 lengths, up to 2.8 meters - 2 lengths, up to 3.4 meters - 2.5 lengths, up to 4 meters – 3 lengths for each panel.
Thus, in order to calculate the height of the curtain, you need to measure the distance from the hook attachment point to the bottom edge of the future curtain, and add 3 cm to this distance. For example: You want a floor-length curtain. We measure the distance from the hook to the floor - let it be 247 cm. Add 3 cm - we get 250.
In order to find out the width of the curtains, you need to multiply the length of the cornice by the corresponding pomp factor (from 1.5 to 3.5). If the curtains are made of light fabric without ornament, for example, organza, mesh, veil, then the width is 3.5 times the length.
Calculation example
When all the necessary measurements have been taken, it is time to calculate the width and length of the curtains or fabric for them. If the resulting width of the window area is 2 m and the length is 2.7 m, and you need to purchase curtains and drapes, then you can safely use the assembly factor (KS) = 2 and then we find that the width should be 4 m for a given length.
If you want the window to be decorated with original and unique curtains that are not available in the store, then you need to buy the required amount of fabric to sew them . So, how much fabric will be needed for curtains and drapes for our conditional window?
The standard width of a roll of translucent tulle is 2.8 m , which should be quite enough for the standard window height, so the length issue remains resolved. As for the width, given the width of the window and the selected frame, you will need 2 * 2 = 4 m of fabric. But since the allowances on the sides are 5 cm, the total amount of fabric will be 4.1 m.
The width of curtain fabric is usually 1.4, 2.8 or 3.0 meters. It’s good if the width of the canvas ideally matches the length of the window opening, but it may be that the width is not enough, and then you will have to measure the fabric lengthwise and use several canvases to cover the window opening. Here it is important not to forget about the combination of the pattern and the length of the repeat - a repeating element of the ornament. In this case, you can sew a special fabric together, or maybe just make curtains from two parts.
The calculation in this case will be like this:
amount of fabric = ((window opening height + allowance)*number of panels) + repeat * (number of panels – 1)
If the window width is 2 m and KS = 2, and the width of the fabric in the roll is 1.4 m, then to make curtains, for example, you will need 3 canvases: 1.4 * 3 = 4.2 m, with a repeat value of 0.35 m we get the following data:
amount of fabric = ((2.7+0.2)*3)+0.35*2=9.4 m
If after cutting the fabric and sewing the curtains there is a lot of fabric left , and this may be when a large pattern was chosen, then from the remnants it will be possible to sew tiebacks for curtains or small pillows for the sofa. When the curtains and other textiles in the room are made in the same style, this gives a special effect to the room.
It’s easy to sew the most common curtain models yourself, but if you doubt your professionalism or are planning to decorate a window with an elaborate model, then it is better to resort to the services of specialists.
Determining the width and type of tulle
To summarize, we note that to calculate the width of the tulle, it is necessary to measure the length of the cornice. Next, multiply the resulting figure by a coefficient of 1.5, 2 or 3. The number of the coefficient depends on how lush the drapery on the curtain should be. The tulle on the window opening should form beautiful wavy folds that effectively emphasize the original design of the window.
Our site’s partner, the online store DrapeShop.ru, presents a large catalog of tulle for windows of all sizes.
Learn to use punctuation marks.
There is only one rule here - the more transparent the tulle, the greater its filling.
The most beautiful and rich filling is 1:3. Those. for the same 3-meter window you will need 9 meters.
Next, if you were able to calculate the tulle yourself, you can try, with the help of my articles, to calculate the fabric for curtains and lambrequins.
The second point is potential fabric shrinkage
To choose the right tulle for the window size, you need to take into account the potential shrinkage of the fabric. It is mostly transparent and light. Can be used as an independent decor item or as an addition to contrasting blackout curtains. The shrinkage rate of fabric width varies from 3 to 15 cm. The exact value depends on the type of fabric:
- Organza. It can be plain or multi-colored with numerous patterns. Has shine. It has a strong and dense structure.
- Veil. Softer and sweeter compared to organza. She needs careful care.
- Kiseya. There are many threads in its structure. It protects the room from sunlight. It allows air to pass through well when the window is open.
- Net. It has large weaving in the shape of a rhombus, square and other geometric shapes. Sunlight easily passes through it.
If you want to correctly calculate the width of the tulle for the window, then be sure to take into account the shrinkage rate of the tulle fabric. Buy a canvas 3-15 wider (depending on the material) than you calculated.
Pleated tulle
What else can the calculation of tulle and its filling depend on?
When calculating the tulle, a window diagram will help you, which can be viewed here .
Less filling looks more than modest.
I hope this article helped you in choosing the optimal solution.
The length of the cut is considered to be adding 5-15 centimeters to the distance from the eaves to the floor for the upper and lower hems.
The choice of fabric depends on the taste of the buyer, but there are general recommendations:
– My husband and I are renovating our apartment. In dark rooms we hung light wallpaper, in light rooms - dark and neutral wallpaper. Now it's the turn of the curtains. There is not enough money left, so I would like to know how much fabric I need to buy to make curtains from it? Is there any correct calculation of fabric consumption? You don't want them to crawl around on the floor or to use too much material to tuck them in.
To purchase the material, you can simply measure the length of the cornice and the height from the cornice to the floor with a tape measure, throw a few centimeters on the hem from below and above, and fold back the width of the edges of the canvas . This is what most people do, forgetting about beauty. Drapery adds beauty - creating gathers and graceful folds of various shapes. Therefore, if you want to sew curtains:
Below you can learn more about the types of best fabrics for curtains, their characteristics and photographs.
You can’t sew curtains without knowing which cornice will be in the room. First, we buy a cornice, and if we already have one, we figure out the type and take measurements.
But window metering will be useful if:
Using short curtains
In some rooms it is unwise to use a long curtain, as well as in small houses. Therefore, they choose short curtains, which are no worse than lush long ones, and in some cases even look better. Pros of short tulle:
- open access to the windowsill.
- direct access to the air.
- ease of care.
- less polluted.
- less material required
Arch curtains are convenient for a small room, as they do not take up much space.
Small curtains are available in a variety of designs and colors. Light airy curtains are suitable from a voile, and for the Austrian style buy cotton fabric. With such tulle it is easy to stylishly decorate a window, because the material is quite soft, and uniform waves are created automatically.
The width and height of the tulle is extremely important for the overall picture of the room. Look at photos on the Internet and decide on the type of wave. There is no need to rush and take it “by eye”. Calculate everything correctly and enjoy style and comfort.
Conclusion
The width of the curtains and cornice is an important component when calculating the tailoring and installation of the product, because it should look presentable and allow the interior to look complete. If the window is large, it automatically becomes the center of attention, so it is important to make it flawless, which is why designers are often invited to carry out the project. They know how to take into account the nuances of the material, furnishings and dimensions of the room, as well as accurately calculate the drapery coefficients of the material.
If you need to visually increase the width of the entire room, use a wall-to-wall cornice.
How to correctly calculate the length of a curtain rod?
When measuring the length of the cornice, follow these recommendations: If the size of the window opening in relation to the room suits you, then measure the width of the window and add 15-20 cm on each side - this way you will calculate the length of the cornice that will suit you perfectly.
Interesting materials:
How to check CPU load? How to check the ban for how many years? How to carry a baby stroller on a plane? How to take inventory of property? How to post shortages during inventory? How to conduct an interested party transaction? How to carry alcohol in luggage on a plane? How to conduct auctions under Federal Law 223? How to set off with a supplier? How to carry out offsets in 1C 8.3 Kazakhstan?
