Built-in corner wardrobe - how to choose?

Wardrobes are an integral part of every home or apartment. It is in them that owners store clothes, shoes and much more that should not be in plain sight. At the same time, the area of the room does not always allow for the placement of large pieces of furniture. And built-in models, in particular corner cabinets, are an ideal solution in such a situation.

Built-in corner wardrobe - features, advantages and disadvantages

Today, a built-in corner wardrobe is one of the most fashionable and popular solutions in interior design. In addition to being extremely functional, it easily fits into any room, making it stylish and modern. You can install a corner wardrobe either in a large country house or in the smallest one-room apartment. It is ideal for rooms with a small area and will help to use space efficiently.

The built-in corner wardrobe looks very harmonious in a bedroom or children's room as a dressing room. It is also ideal for hallway interiors.

You can store anything in such a closet: clothes, linen, shoes, detergents and equipment. The filling of such a cabinet consists of several sections fastened together and fixed to the wall. The number of such sections determines the capacity of the module, and accordingly the number of things that can be stored in it.

A built-in corner wardrobe, like any other furniture, has advantages and disadvantages.

Advantages:

Significant space savings with large cabinet capacity. Often corners in a room are left empty or underutilized. Built-in corner wardrobes make this unclaimed space functional.
Possibility of creating a special room layout. Using a wardrobe, you can redesign a standard room and divide it into functional zones without additional construction.
Variety of design solutions. You can decorate cabinet doors in any design style. This allows it to fit harmoniously into the main interior of the room.
Convenient and safe sliding doors.
You can make a storage room from a deep built-in corner wardrobe.
Such a closet will allow you to get rid of unnecessary furniture and store many things in one place.

The design, along with its multiple advantages, also has some disadvantages:

Impossibility of rearranging furniture.
To avoid future distortions and wear of sliding mechanisms, careful preparation of the walls and floor is required before installing the structure.

How does a built-in wardrobe work?

The built-in corner wardrobe with sliding doors has no frame. Its structure is quite simple and consists of sections tightly fastened together and fixed to the walls. These models provide for the installation of only the frame and shelves in a niche.

The structural elements are the ceiling, floor and walls of the room. These are the types of cabinets that are traditionally considered built-in. To secure the guides, use a false frame. This is a frame located around the perimeter of the opening into which the filling of the built-in wardrobe is installed.

Guides for the sliding door are mounted at the top and bottom of the false frame. On the left and right, doors approach the frame when opening and closing.

Main functions of the false frame:

Compensation for uneven surfaces.
Solving the problem of the lack of a right angle in the opening.
During installation of the structure, cracks may form. To prevent debris and dust from getting into the cabinet through them, they are covered with special covers.

Shapes of corner built-in wardrobes

To choose the right built-in corner cabinet, you should first pay special attention to the choice of shape.

One of the most voluminous, but at the same time popular, built-in wardrobes are L-shaped and with an outer L-shaped corner in the shape of a square. Such a cabinet occupies the corner itself and both walls that form it. It is the large dimensions of this model that make it more spacious. A corner wardrobe of this shape can be equipped with sections without doors. It can be placed in a large hallway or in the living room. The only thing is that you shouldn’t install partitions in the closet, otherwise it will be difficult to get things out of it.
Another type of built-in corner wardrobes is triangular or diagonal in shape. The cabinets of this model have a triangular shape, and therefore fit into the corner as functionally as possible. This is the most compact model and is suitable for small spaces such as a bathroom or hallway. A triangular wardrobe fits perfectly into the space between windows or doors on adjacent walls. The only negative is the triangular shelves, which are not very spacious.
The most modern, elegant and original model of built-in corner wardrobes are radius wardrobes. They got the name radius for their curved and original door shapes. Such designs combine concave and convex sections with graceful transitions. Radius doors can harmoniously fit into any interior, as they are absolutely universal. Thanks to the roundness of its shape, this cabinet is very spacious and much more functional than other corner models. Their only drawback is the complexity of assembly. Installation of the structure provides additional rails on the ceiling or floor.

Types of radius corner cabinets

There are two main types of semicircular cabinets:

case;
built-in type.

Cabinet modules are a corner cabinet, the frame of which is not connected to the structural elements of the room corner. The storage system body consists of the sides, bottom, back wall and top cover. The separate design makes it possible to easily change the location of the cabinet.

In built-in systems, the load-bearing structures are the adjacent corner walls, floor and ceiling of the room. Built-in type modules are made according to the geometric parameters of the angle, making it impossible to reinstall the furniture in another place.

Depending on the type of radius, corner modules with an arcuate facade can be:

concave;
convex;
combined.

Relief models are a piece of furniture with an outward radius. The advantage of cabinets with an outer radius is the increased space inside, which makes it possible to place a decent number of items in the middle of the system.

Concave semicircular cabinets naturally have a radius concave inward. This model visually makes the space wider. The concave round shape of the facade smoothes out the sharp lines of the room.

Part of the facade of the combined semicircular cabinet has parts with both outer and concave curves.

If you are concerned about the topic of a corner built-in balcony wardrobe. Follow the link.

Systems of sliding mechanisms for opening doors of corner wardrobes

There are three main systems for hanging the doors of built-in corner wardrobes: with support on the top rail, with support on the bottom and monorail. Each of these systems has advantages and disadvantages, and therefore the choice of system depends on the size of the cabinet, its purpose and budget.

Support on the top rail. Due to the fact that the ceiling is made of concrete and does not sag, the system’s doors move smoothly and easily. The fittings for such a system are cheap, and it is not difficult to install. However, the top rail is not widely used due to a number of disadvantages. Firstly, with a sharp push, the door may fall inside the cabinet, secondly, due to the lack of a lower guide, the doors hit and rub against each other, thirdly, due to insufficient rigidity of the upper rail, additional leveling of the ceiling is required.
Monorail. This system assumes the presence of a separate guide for each sash and two pairs of rollers in each of these carriages. The structure is attached to the ceiling, but the lower guide is still needed so as not to cause the doors to touch each other when pushed.
Support on the bottom rail. This suspension system is the most common. It is simple, cheap, convenient and most reliable. The lower rollers hold the doors. They do not fall out and do not touch one another. The only point that should be taken into account when choosing such a system is the choice of high-quality rollers, since they are the ones that bear the heavy load.

Design features of cabinet doors

Semicircular compartment doors for a dressing room are designed on the basis of documents that are essentially similar to a conventional compartment system. Here also

the following mechanisms are used:

There are two or more sashes;
Silicone rollers;
Guides;
Stops;
Fastening elements.

But there is one significant difference, which lies in the individual production of the guide rail and the door itself. Their shape must match completely. Otherwise, distortions and rapid wear of parts may occur. The remaining elements can be called standard, but here everything will depend on the chosen modification.

How do the doors of built-in wardrobes work?

The main feature of built-in corner wardrobes is sliding doors. What distinguishes them from swing doors is that they open by moving along horizontal guides.

Sliding systems can be of three types: frameless, with an overlay profile, and framed.

The simplest and most affordable option is frameless doors. These are two doors with rollers on the inside. Such doors move along the top guide. The main advantage of this type of sliding system is easy installation. The downside is that it is impractical and not aesthetically pleasing.
An overlay metal profile around the perimeter of the door gives the system more reliability. In addition, doors with an overlay profile move more smoothly and softly.
Frame doors are the most reliable. The frame provides rigidity to the structure and prevents deformation. The doors are attached to the bottom track, which adds strength to the system.

It is important to pay attention to the material of the system. Aluminum guides will last much longer than a steel system.

The material of the frame of the rollers also matters. They can be rubber, Teflon, plastic and steel.

It is important to correctly find the number of sashes for a certain cabinet width. The fewer the doors, the more convenient the design will be. The maximum permissible sash width is 700 mm. The overlap width between the sashes should not exceed 70 mm. It should also be noted that the width of the door should not be greater than the width of the narrowest shelf, otherwise the shelf will be inaccessible. If, when calculating, you do not fit into the maximum opening, then you need to add another door.

The optimal number of doors is from two to four.

Types of facade finishing

The facades of built-in corner wardrobes with sliding doors are finished using various materials, which allows you to give them a design that fits into the interior of any room.

PVC film. This type of finishing is quite inexpensive and at the same time allows you to give the furniture a stylish look. The film is very popular due to the variety of colors and textures of the material.
MDF. Facades made of this material are painted with acrylic paints, after which they are polished or varnished. Thanks to modern techniques, such a simple material as MDF can be given a unique look with pearlescent tints, create the effect of a starry sky, make the surface glossy or matte.
Plastic. A plastic facade is a cheap and practical option. It does not require special care, but can add brightness to the room and become a highlight of the interior.
Wood and veneer. Wood itself looks expensive and rich, and a wooden facade decorated with carvings or mosaics will create a luxurious and warm atmosphere in the room.
Glass. Glass facades look very beautiful, especially in the case of a combination of matte and glossy elements. However, there is one drawback - such a facade is very fragile and requires careful handling.

Internal filling of a built-in corner wardrobe

There are many different options for filling sliding wardrobes. When choosing the contents, it is important to consider which room the cabinet will be in and what you are going to store in it.

There are a number of basic elements for filling built-in wardrobes:

Barbell. This element is used for hanging outerwear, as well as suits, dresses, etc.
Pull-out trouser. Thanks to the presence of several straps, the trousers will always have an impeccable appearance.
Stationary or mobile open shelves.
Drawers or baskets on closers. Suitable for storing linen, bedding, towels.
Small drawers for storing accessories.
Retractable devices for ties, belts, belts.
Inclined shoe stands.
Shelves or mezzanines for hats.
Hooks or hangers for bags.

Filling inside

To select the contents inside, you should determine from the very beginning the main practical purpose of the furniture item. Thus, a corner radius wardrobe must be equipped with storage systems such as:

shelves for storing T-shirts, jackets, sweaters, etc., bed linen;
rods for hanging things on hangers;
drawers that pull out for storing linen, socks and tights, jewelry;
trouser holders for storing trousers;
devices for storing ties and neck scarves.

The contents of the module in the hallway should include trempel or hooks, shoe racks, pull-out drawers, and a mezzanine. A semicircular cabinet, used as storage for books, is equipped with a large number of shelves of any height.

Photos of built-in corner wardrobes

A wardrobe built into a corner is a universal design that can be used in the interior of any room.
A properly chosen closet will allow you to save space as much as possible and accommodate a large number of things and objects. In addition, a beautifully designed wardrobe can become one of the main elements of the interior. Shatura online store catalog - buy a cabinet inexpensively from the manufacturer

Purpose of corner semicircular cabinets

You can choose a corner semicircular cabinet for both small and large rooms. The radius design is ideal for every interior. Very often, a corner module with a curved facade is used in hallways, bedrooms, and guest rooms.

If you are concerned about the topic of a corner wardrobe built into the loggia. Follow the link.

The main purpose of the module with a radial facade is to serve as a storage room for various items. However, the possibilities in the work of a piece of furniture do not end there. A radius corner cabinet not only makes it possible to make maximum use of the not very practical area of the room, but also to adjust the room space by smoothing corners with sharp ends. At the same time, the original modern design of the storage system makes it possible to use a piece of furniture as the main element of room decor.