DIY flower shelves: TOP 100 photo ideas 2022

Complete harmony of the interior of the room is achieved with the help of indoor flowers. Green plants fill the room with oxygen and decorate the house every day. Flowers of extraordinary beauty saturate the lives of household members with comfort, peace, balance, and joy. Admiring the flowers, apartment residents forget about hardships and sorrows.

Fresh flowers always create a special atmosphere in the house

From time to time, housewives plant and add purchased plants, replenishing the large flower collection with exotic specimens. It is quite difficult to place an increased number of plants in a small place. Professional flower growers recommend using shelves for flowers on the windowsill, which significantly save effective space and allow you to increase the size of the green corner.

A simple shelving allows you to place plants so that they do not interfere with each other

Materials for making shelves

Specialists and home craftsmen who love to do everything with their own hands are not limited in anything in terms of the choice of raw materials.
For homemade flower shelves, you can use whatever you have on hand, such as pipe scraps, pallets, old suitcases and other items. However, in the production of high-quality furniture the following are used:

• wood..
• MDF, chipboard, chipboard, plywood.
• metal.
• cup.
• plastic.

Plastic shelf

It sounds like a play on words, but the window sill flower shelf is made from... window sill. It can be found in finished form in hardware stores or purchased from plastic window manufacturers. In addition to the plastic napkin, you will need:

• nickel-plated pipes;
• flanges;
• brackets;
• work tool.

• The window sill is cut lengthwise into three pieces of equal size.
• In addition, three holes are drilled in each part into which the rack pipes will be inserted.
• They are located according to the following pattern: 2 holes along the edges of the back line and 1 in the center of the front line. The result should be a support triangle.
• The next step in creating a DIY flower shelf is to cut the pipes.
• The three parts are the same length. We assemble the structure and fix the elements with flanges and screws. For greater reliability, the two rear pipes are secured to the wall with brackets.

Plastic shelf options are very practical. They are easy to care for, and they are not afraid of water, which is very important in the case of flowers.

Wooden flower shelves

Wood is one of the most reliable building materials.

Properly assembled and secured wooden shelves or racks will be suitable for any number of plants, regardless of their size. When choosing hanging wooden shelves, you can limit yourself to the simplest option. To do this, take wood of the required length, coat it with varnish or varnish and attach it to the wall with metal corners.

By replacing clasps with leather straps, you get a creative approach to design that adds personality.

• Wooden floor stands are made for plants in large flowerpots. They can withstand a lot of weight, which allows you to combine different colors.
• A corner shelf is easily assembled from scraps, even of different lengths. Flowering bushes with their bright colors diversify the boring life of corners.
• For those who like unusual options, we offer wooden shelves that combine different materials.
• The method of attaching wooden shelves or racks is the same as in the plywood version.

Glass shelf

Although the main location of such shelves is considered to be a window, no one bothers to move them to the walls and even the floor. The texture of glass will allow plants to receive a sufficient portion of light everywhere. Such designs will become a real highlight of the interior if they are equipped with original lighting.

But let's return to the window option. How to assemble such a flower shelf with your own hands?

You need to cut three to five blanks from glass, and also prepare two wooden slats. Be careful, any glass will not work. It must be thick, 5 mm and hardened, otherwise the weight of the pots will not support it.

To secure the shelves, you will need to cut grooves into the guides. Make them deep enough to support the main load-bearing elements.

shelves made of MDF, chipboard

There are many design options for corner flower placement. Ergonomic and functional handmade shelves will allow you to effectively use the space of the room. Structures of any size can be made from wood materials.

The easiest way is to make a multi-story shelf that tapers at the top, allowing you to accommodate different types of plants. It is necessary to cut suitable surface blanks from chipboard and MDF sheets. Then drill holes that match the diameter of the center axis.

We put all the parts one by one and fasten them with flanges. We install it in a corner at a certain height and fix it with brackets. The vertical decor of indoor plants can be painted or varnished.

Forged metal shelf

Finely wrought ironwork creates a classic, luxurious ambiance. Such shelves can be made only of metal or combined with wood or glass. The results are very impressive interior details.

Most of these shelves are made to be floor-mounted due to their heavy weight. Forged shelves for flowers on the wall are made of small and medium sizes; special fastenings with increased strength are installed for them. The walls must also be strong enough to support this weight.

Combined flower shelves

The most popular combination is the duet of metal and wood. The wooden base, supported by a beautifully welded or forged metal frame, is ideal for modern interior solutions as a wall or floor flower shelf.

To create such an accessory, you will need metalworking skills, so assembling it yourself will be difficult. It is better to order the model you are interested in from a specialist.

But this is not the only option for combining materials. Wood can be integrated into leather, rope, glass. Glass, in turn, makes an excellent pair with chromed metal, and the latter interacts well with bright plastic. You can check out standard and crazy combination designs on the Internet.

Shelves made of plastic pipes

Cheap and easy-to-use PVC material makes original flower stands. For anything else you will need several meters of pipes, tees, plugs and wood siding. The material can be ordered for cutting directly in the store, depending on the size and number of design parts.

We adjust all the details of the future shelf according to the drawing, connect and glue them together. For beauty, we put spikes on the legs. We make holes in wooden blanks and fasten them to plastic pipes. 2-3 levels are enough, since flexible material cannot withstand heavy loads.

Which material is better to choose

Metal structures are very durable and can withstand a lot of weight. This setup feels expensive and rugged. But it requires special care and special treatment, otherwise corrosion may occur and the flower shelves will deteriorate.

It is almost impossible to build a plastic cabinet yourself; it is ordered in stores or on the Internet. They are unpretentious and very easy to use. Sections can be chosen in any shade. Since plastic is very flexible, crafts made from it can come in different shapes and sizes. They are easy to clean and move as they are lightweight.

The manufacture of wood products is very popular. But the furniture is inconvenient to use. When watering plants, water often gets on the surface of the stand, the board and can rot and swell. If you decide to build a wooden shelf, it must be carefully processed, and the surface must be well coated with a special varnish.

Glass structures have a simple and sophisticated look, but to create them you need to have experience working with glass. They need special care. And such fastenings cannot be given much weight. They work well if you need to place one or two pots.

Combination sections include several components. Usually it is wood with metal or glass with metal. The crafts have an unusual appearance. They can support a lot of weight due to the combination of substances and are not too extravagant to clean.

Proper care of violets

Violets under the ceiling - an interesting combination of business and pleasure

In order for a violet to grow and delight you with its blooms, you need to take care of it. Otherwise, it may get sick, spots will form on the leaves, they will curl and wither.

To prevent this from happening, you need to follow some rules in caring for this delicate flower:

1. Avoid direct exposure to sunlight. Violets love diffused light, but do not like bright sun. For a plant to bloom, it needs to be exposed to light for at least 12 hours a day. If there is not enough light, the leaves will tend to rise; if there is too much light, on the contrary, they will fall over the edge of the pot. In order for violets to delight with their flowering all year round, it is worth arranging for them a rack with fluorescent lamps with a power of 40 W.

1. By maintaining this temperature regime, the plant blooms long and luxuriantly and grows strong. If the plant blooms in the summer, in a heat of more than 30 degrees, it is noted that the flowers are smaller and paler; on the leaves of different types of violets, characteristic specks or borders are absent or weakly expressed. To correct the situation, you can use an air conditioner or a stream of fresh air from an open window. In the cold season, you need to beware of drafts; if the plant freezes, its root system will die, and if it is exposed to cold air for a long time, light spots will appear on the leaves, which will significantly spoil the appearance of the violet.

Wooden shelving of different heights

1. It is advisable to water the plant with water without additional impurities. For these purposes, ordinary tap water is also suitable, which should be allowed to stand for a couple of days to get rid of excess chlorine. Next, you should boil the water to get rid of the salts and leave to cool. The liquid for irrigation should have a temperature higher than the soil in the pots and the air in the room. It is noteworthy that water at room temperature is not suitable for watering plants, especially in winter, when the plants on the shelf have a higher soil temperature than the water. Because of this, centopolias often die en masse during the cold season. It is best to water violets from above, pouring water into the pan. After 10-20 minutes, it is advisable to get rid of excess water, since its excess can lead to rotting of the roots. Once a month, you need to wash the leaves with a damp cloth and a spray bottle.
2. To ensure normal growth of the violet, the humidity in the room must be at least 50%. During the heating season at home, this rule is not easy to follow. As an option, you can place an open container of water near the plants or use a humidifier. However, there is no need to be too zealous, because at a humidity level of more than 70%, the plants will be actively attacked by fungal diseases.

Metal rack with separate lighting for each shelf

1. Soil and fertilizers. The soil must retain moisture and nutrients well; for this, you can additionally add perlite or vermiculite - these are natural minerals. The violet needs drainage; for these purposes you can use foam chips. The acidity of the soil is not least important; neutral or slightly acidic is suitable for violets. During vigorous growth, the plant needs phosphorus and potassium; thanks to these additives, the violet blooms magnificently. Once every 3-4 weeks these substances should be added to the soil.
2. A plastic pot is suitable for violets; it is easier to care for. Each time the plant is replanted, the diameter of the pot should be increased. It is believed that the diameter of the plant should be 3 times larger than the diameter of the pot. When replanting a plant, you do not need to compact the soil too much, as this will prevent water from saturating the soil, and soil that does not dry out for a long time will lead to rotting of the root system.

Popular articles Rose Heavenly Pink - description of the variety

Flower shelf models

Today there are countless decorative elements that have practical significance in family life. We have compiled a list of existing models:

• Wall shelves. These options are used for arranging small flower pots. They take up little space, but require mandatory reinforcement on the wall.
• Floor models. Comfortable, original, varied in shape. Sufficiently sustainable home accessories.
• Corner shelves. This is the most profitable option in terms of saving living space. The model fits well in any corner and fills voids, if any.
• Suspension options. Some designers affectionately call this model a “swing”. On a similar shelf, you can place pots with intertwined plants or use trellises to place the pots.

Wall shelf

A small hanging shelf can be made from any sheet material or wide board. Consider the manufacture of chipboard as the most difficult material to work with.

The structure will consist of such details as:

• the base that will be adjacent to the wall;
• the shelves themselves, the number of which can be any;
• shelf in the form of right triangles with a straight or figured hypotenuse.

First, as with any model, a product diagram is drawn up to determine the size and quantity of material.

Then all the elements are cut out of chipboard using a jigsaw. Marks are made on the base for attaching shelves and supports. Holes for self-tapping screws are drilled along the marking lines. The parts are first glued to the base with universal glue, and then screwed to the ends on the back side of the base.

After the glue has set, the ends of the chipboard and the seams are puttied on the wood with putty. This is a great alternative to edges that can be difficult to secure on curved cuts, especially if they are not very sharp. All irregularities can be easily removed with putty.

When the putty has dried, all surfaces are sanded with fine sandpaper or an abrasive mesh and painted in the chosen color.

So, without much effort and professional furniture making skills, you can make a useful and beautiful thing for your home in just a few hours. We do exactly what you need in terms of functionality and decorativeness.

Floor stands

Flower stands can be fixed or mobile. Furniture wheels are attached to the base or furniture uprights. Low movable stands are useful for large flowers. The plant is easier to care for and easier to clean.

There are very low ones - for plants above a meter there are two tiers - for those that have not yet grown to a meter. In any case, this type of support is convenient for large plants. This type is also sometimes called a flower stand. Low floor stand on wheels - for tall or massive plants

There are also tall mobile bookcases or flower racks. At least four wheels, but five is better. Not because the weight can be heavy, but because moving a tall structure on five wheels reduces the likelihood of it tipping over. In any model, regardless of height, it is more convenient to turn the wheels.

Mobile racks are convenient: you don’t need to carry one pan at a time. Ride together

Hanging

Now it’s worth talking about light-loving plants that need to be installed closer to the window or even on the window. Of course, we will not talk about flowers, but about flower shelves. Of course, your desire to place flowers on the window may be caused not only by the plant’s love of light, but also by the growth structure of its shoots. They can be, for example, smooth or curly.

In this case, it is better to think about how to place these flowers higher. How to make shelves for flowers in this case? For this you can use different materials.

You can also place hanging potted plants in the window. To do this we only need a few 8x60 hook anchors.

1. Use a hole punch to make a hole in the top of the window.
2. Insert the anchor hook and screw it clockwise until it stops.
3. We tie the ropes to the vases. It's better if it's regular fishing line. It's not that noticeable and quite strong. However, there is no limit to imagination.

Anchor bolt with hook

The anchor mechanism is designed in such a way that after screwing in, its spacer part expands and thus fits tightly to the concrete.

Corner flower shelves

You can save space by using a corner shelf. These products are mounted and mounted on the floor, placed on internal or external corners. They are made from any material.

These can be compositions of several separate shelves or real spacious shelves. The assembly and fastening of such structures depends on their types and materials.

Shelves for flowers and seedlings with lighting

Shelves with lighting for placing plants are made on large supports, of sufficient height for the free dispersion of artificial light. Traditional materials - wood, plastic, metal. Everyone chooses the most acceptable manufacturing option for themselves. The main thing is that the shelf lasts a long time, is practical and reliable.

A wooden product can be made from lattice-type timber. The bulky and heavy structure is installed on the floor and consists of several levels. For the rapid growth of flowers and seedlings in the winter-spring period and rapid growth of mass, it is necessary to install additional lighting. The following types of lamps are suitable for this:

1. VEL. The diode circuit is assembled from a selection of light bulbs. Elements of the red and blue spectrum are suitable. They are placed one by one on the base and fixed with a special paste. They then lead to the driver and turn on the electrical outlet and switch.
2. Fluorescent lamps. The devices have a fixed length, which must be taken into account when installing the backlight on a stand. The wire is carefully distributed along the previous shelf level and fixed with 2 lamps with a gap of 1.5 cm.
3. Sodium gas discharge lamps. The lamps are screwed to the base using wire or metal tape. For their correct operation, you will also need to install an adjustment device.
4. Phytolapma. Compact and economical lamps can be placed at any distance from the seedlings. Single elements with a large radius of light dispersion are located in the center, linear elements are installed on a special stand.

Window sill rack

This type of rack allows you to install boxes with seedlings next to the window. This certainly plays a positive role, especially in terms of lighting. This design does not require the installation of lamps. However, this scheme also has its disadvantages. For example, the size of such a rack is limited by the width of the window sill and window. Therefore, some types of plants may not fit here.

Window sill shelving diagram.

Before starting work, as usual, we prepare the project and draw a drawing. It must indicate the dimensions of all future structural parts. This will prevent confusion during the assembly process.

1. First of all, we assemble the side parts of the rack. To do this, two rectangles are made from the profile by welding. Their height is five centimeters below the window opening. In depth they are equal to the width of the slope.
2. We fasten both rectangles together with long pieces at the bottom and top.
3. The frame for the shelves is welded from corners.
4. We make special threaded holes in the side posts (you can simply weld a nut). This will allow you to firmly clamp the structure between the window sill and the upper slope using bolts.
5. At the last stage, the structure must be treated with an anti-corrosion agent and painted.
6. After this, we cut out and fasten the shelves.

This type of rack is good because it can be removed from the window at any time by unscrewing the bolts and moved to a new location.

Video instructions for making a simple window rack

The video below is perfect for beginners. The design of the rack is very simple, airy, the author successfully chose the necessary camera angles and revealed in detail all the manufacturing aspects.

What forms are there?

Design templates have a huge selection of different variations. The following types of flower stands are often found in shape:

• Ladder. The multi-stage model will create a cascading effect in your floral corner.
• A-shaped floor models. This variation, in addition to the cascading body, has a double-sided position, which favorably emphasizes the visual image of a flower gallery.
• Rack. The simplest form of the options for floor or wall shelves. Here you can find the most unusual types of products: corner, straight, without crossbars.
• Retractable stand. The model is complex in execution, but convenient in practical use.
• The swing is paused. We have already mentioned this option: horizontal strips are laid on suspended supports.

How to assemble a rack

You need to decide on the dimensions of the structure:

• overall size;
• height and width;
• distance between shelves;
• shelf size.

If the rack is stationary, then it must be assembled immediately in the room in which it will be installed.

1. The frame of the side posts of the rack is made from a profile pipe; for this you need to weld or bolt two identical rectangles.
2. At a distance of 20 centimeters from the bottom of the rectangles, a transverse section of pipe is welded for stability of the structure.
3. The same beams need to be welded from the top.
4. Reinforce the structure by welding one jumper approximately in the middle in the side rectangles.
5. To attach the shelves, you need to make holes in the rack posts, the number of which will be equal to the number of shelves. The minimum distance between holes is 25 cm.
6. Cut the corner profile exactly to the width of the shelves.
7. Attach the profile to the posts at the drilled holes using bolts and nuts.
8. Cut plywood or OSB and place it on the profile; if desired, you can cut out shelves from sheet iron.

As you can see, there is nothing complicated in this design, and it is assembled quite simply.

You can also make a rack without resorting to welding; in this situation, instead of a profile pipe, a metal corner of 5 is used. In terms of cost, such a design will be a little cheaper and will be easy to disassemble.

Unusual ideas

Any flower shelves, floor-mounted, hanging or wall-mounted, can be made from the simplest materials. As a result, you will get very unusual options that will please the eye and serve their intended purpose perfectly.

Shelf-rack from an old door

The second life of an old door leaf is a vintage shelf for indoor plants or other small household items. To make a high-quality rack, an enameled product is suitable. We take out and nail the transverse strips with a ladder. The depth of the vertical supports will depend on the degree of inclination of the structure.

To increase strength, the door shelf can be attached to the wall or equipped with a drawer in the base. Massive legs, like a wooden ladder, will securely hold the canvas.

Pallet shelf

This flower shelf will fit organically into the interior of a kitchen or loft in a country style. The finished pallet does not even need to be divided and modernized; in its original form it is already suitable for use. Securely attached to the wall, the pallet immediately turns into an original piece of furniture.

The pallet will make an excellent display case for ornamental plants. You just need to add some crossbars and place flowers of the same size on them in beautiful vases. If desired, the wooden elements can be sanded, painted and varnished.

Hanging shelf made from old books

From simple materials at hand, you can make an original shelf for indoor plants. One option is to use old books and strings. It will look great in country and eco style.

To work you will need two wide books, a drill, brushes and paints, and jute rope. Drill 4 holes around the perimeter of the books. Divide the rope into 4 segments and tie knots along the edges. We place the books on top of each other and thread the laces through the holes, securing them with knots. We assemble the strips and fix them to the ceiling with an anchor hook.

Shelf made of driftwood

For people with imagination, natural materials are a treasure trove of unique ideas. Look at the photo gallery of flower shelves and you will see that this is truly the most successful element of the interior.

There is not much work to do on them, and they are not difficult either. The wood found after the windbreak will only need to be slightly adjusted, trimmed to highlight the existing shape, and simply complemented with the original support or perhaps a piece of furniture.

A flower shelf made from the remains of trees with your own hands will turn out great. Depending on the type of source material, the product can be placed or placed on a natural basis. According to one version, the accessory is assembled from several medium-thick branches, which, after polishing and painting, are installed on a plywood base.

Flowerpots can stand in real nests intertwined with vines, fixed in the interweaving of branches, or on geometric supports. The latter are firmly attached to the branches.

The second option for shelves for flowers can hardly be called an accessory, since it is a full-fledged element of room decor, which is not just a stand, but a whole semantic composition. The basis here will be a sawn tree trunk with a branching system.

The branches are cut so that you can attach shelves for flowers with your own hands at different levels. There should be many such stands and they should not be too large. When plants are depicted on them, the effect of a living tree should appear.

A chain is wrapped around the trunk, on which a cat carved from wood will then be placed. If you don’t want fairy tales, complement the composition with birds of paradise sitting on the branches or implement other design ideas.

Shelf made of metal water pipes

An inexpensive and practical option is a floor shelf made of metal pipes. The flower stand can be made of any size. The choice of model will depend on the functional requirements, type, and purpose of residence.

The design of the structure is selected in accordance with the style of the interior. Shelves made of metal tubes for attic living rooms do not require cleaning or additional processing. In shabby chic rooms, in Provence, such a stand will look original with decor using the decoupage technique, with an aged effect.

Miniature wall models can also be made from metal pipes. They can be complemented with various decors, including light ones. The light element is installed on one of the open parts of the tube, a wire is threaded through the hole and led to the outlet.

Wooden rack for seedlings

If you are planning to make a shelving unit from wood, you will first need to draw a sketch of it so that you do not forget what dimensions to adhere to. Here is an example of a suitable diagram:

After preparing the sketch, you need to collect the following materials and tools:

• wooden beams for racks with a section of 45x60 mm (2 pieces of 3 m each, you can immediately ask to cut them into 1.5 m sections);
• wooden beams for crossbars with a cross-section of 20x60 mm (2 pieces, 2 m each, you can immediately ask to cut them into 50 cm pieces);
• wooden board for shelves with a section of 22x100 mm (one shelf takes 5 pieces 75 cm long, then for all 4 shelves you need 4-5 boards of 3 m each);
• saw;
• screws, nails;
• chisel;
• hammer;
• wood glue;
• roulette;
• pencil.

After preparing all the necessary materials and tools, you can proceed directly to the construction of the rack. This process essentially consists of two main stages - cutting parts and assembling them. We will consider each stage separately.

Cutting parts

The timber purchased from a hardware store must be cut taking into account the following parameters:

• the length of the bars for the manufacture of supporting parts of the rack (racks) is 1.5 m each;
• the length of the bar for the crossbars is 50 cm;
• the length of the shelf boards is 75 cm.

On each beam you will need to measure the required length, draw a line and cut along it using a miter saw or a regular saw. To save overall time, it is advisable to use a circular saw or jigsaw. Based on the cutting results, you need to obtain the following elements of the future design:

• 4 supports 1.5 m long;
• 8 short timber crossbars;
• 15-20 boards for shelves.

To further strengthen the rack, you can prepare bars that will need to be screwed to the finished structure diagonally at the back wall.

Assembly

The prepared boards need to be connected like a construction set to get the finished product. You must act in this order:

1. Mark with a pencil where the groove for the crossbar will be located, attaching it to the support beam:
   The first crossbar should be located at a distance of 23-24 cm from the edge of the support beam, and the subsequent ones - 40 cm from each other. Measurements should be taken from the end of the support beam, which is in contact with the floor. This will ensure that the shelves are at the same height.
2. At the marking sites, first make cuts taking into account the thickness of the crossbar, and then cut out the grooves using a hammer and chisel.
   Please note that the crossbar must be recessed into the groove.
3. Secure the first cross member between the two support bars by driving it into the groove with a hammer (dimensions in mm in the photo).
4. After 40 cm, fix another crossbar, and behind it two more (the last crossbar will be at the very top edge). The result should be a kind of staircase.
5. Prepare the second side of the structure as described above.
6. Lay the boards that will make up the shelves between the two support posts. Secure them to the crossbars using self-tapping screws or nails.
7. Cut corners in the end boards so that the support beams fit into them.
8. Create the two top shelves in the same way.
9. The top shelf can be made longer.

The finished structure will look like this:

Modern flower stands

Recently, popular interiors are increasingly looking for geometrically simple and laconic forms. And we like them for their simplicity. But not everyone is ready to give up plants. The good news is that even laconic techno styles can adapt to plants.

Their form should also be concise and strict. And also a floor stand. Look at yourself. Stands can be made of metal and wood in any style. Also for high-tech or minimalism style. And it’s not even worth talking about loft or rustic. There are many interesting ideas.

To get the maximum effect, you need to choose the right plant shape.

Do you need lighting?

When assembling a rack for seedlings with their own hands, some gardeners think that they can do without additional lighting. It is worth noting that even for a structure that was mounted on a window, it is necessary to provide for the presence of lamps of the appropriate type.

In winter, daylight hours are quite short. Due to lack of natural light, seedlings may not develop well. Photosynthesis processes will proceed slowly. Because of this, biomass growth will not occur at the required pace. In order for plants to develop normally, it is necessary to install additional lighting on the rack. This will provide normal conditions for the seedlings and allow the seedlings to gain strength before transplanting them to the site

It is important to choose the right lamp that will meet all requirements

Where to install the bookcase

When it comes to arranging objects or flower shelves in a garden plot, as a rule, no significant difficulties arise. When choosing a place for them on the street, it is important to take into account the needs of flowers and plants: do they love the sun or, conversely, do they need shade.

If there is a bookcase in the house, you need to think about its location so as not to take up extra space.

For small rooms, corner shelves are ideal, which, despite their high compactness, allow you to place several large pots. Another great way to save useful space is to place shelves, racks and flower racks on the wall.

Indoor plants very often “live” on window sills, loggias and balconies. Here you can also optimize your existing space with shelving and shelving. For example, a compact bookcase with several shelves allows you to organize flower arrangements on the windowsill.

Alternatively, instead of the entire structure, you can attach several separate shelves to the window opening and place flowers on their surface. However, in this case, the flowerpots will block the passage of daylight and, in addition, the window will not be able to open.

It is also very convenient to use a multi-tiered bookcase for arranging flowers on the windowsill. Thanks to the design of this product, the flowerpots will be located in different tiers without blocking the central part of the window opening.

If your flowers are on the balcony, you can organize their arrangement using compact stands. In this case, the rack can be made either in the form of a stand on which flower pots are hung, or in the form of a separate open cabinet with shelves. Some shelves and racks have wheels so they can be easily moved to different rooms.

When choosing flower stands for your home, pay attention to how functional their shelves are. Many products are equipped with special removable trays that can be easily removed to remove residual water

Design Features

A huge variety of shelves, stands and racks sold pre-assembled can be excellent ideas for interior design. The main design can be supplemented with original design elements or decorations, which will help create a unique and stylish design solution:

• floor and portable structures
• hanging shelves and flower stands
• wall-mounted, in the form of shelves with a base;
• corner, saving maximum space.

Any model from the existing variety will be a worthy interior decoration and is not difficult to make with your own hands. This will require choosing a sketch and an idea that can be easily implemented with minimal time and money, using available materials and home tools.

Required Tools

To collect the configuration you will need the following tools:

• screwdriver;
• building level;
• electric drill;
• saw;
• pencil for marking;
• hammer;
• screwdriver;
• roulette;
• manage.

The choice of fasteners will depend on the raw materials of the future configuration. The heavier the raw material, the stronger the fastener. If you are planning to install a metal wall flower shelf, you will need to use a welding machine to attach it.

Otherwise, there is a chance that the stand will fall down soon.

Master class: plywood shelf

Making a shelf out of plywood is not difficult; first you need to prepare a suitable sketch.

• Plywood is easy to work with, you can cut out many interesting shapes, so the shelf will turn out unique and original.
• The sketch must be transferred to a sheet of plywood. It should be remembered that such a shelf will not withstand heavy loads, so you should not load it with flowers and overload it.
• To cut out figures, it is better to take a regular or electric jigsaw, after which you need to sand the cut edges of the saw with sandpaper and apply a special impregnation.
• The last stage is applying paint, which will allow the plywood shelf to become more resistant to damage and moisture.

The finished shelf can be decorated however you like, just use your imagination and prepare the necessary furniture.

Master class: shelf made of furniture panels and bars

Cutouts from glued furniture panels can be found in furniture workshops and bought for pennies. After all, shelves require very small parts that are difficult to find for other purposes. But you can also buy a sheet of the appropriate size.

This material is practically no different in appearance and characteristics from solid wood, it is just as easy to work with, and also requires a protective finish to increase moisture resistance. A neighborhood with which it is inevitable to put living plants on shelves.

Step 1. Decide on the number and shape of shelves, draw their outlines with a pencil on the cabinet panel.

Step 2: On the bad side, cover the outline with masking tape or masking tape to prevent chipping when cutting.

Step 3. Cut out the pieces with a puzzle.

Step 4. We fix the parts on the table with clamps and process their edges with a milling machine, rounding them or giving them a shaped shape.

Step 5. Remove all small irregularities and defects by sanding. To avoid the formation of abrasive scratches on the surface, sanding should be carried out along the grain of the wood.

Step 6. We also process the rods for the legs with a router, round the corners and smooth them until a smooth surface is obtained without scratches or burrs. If there is a desire and opportunity, they can get a curly shape. Otherwise, normal processing is sufficient. Also, instead of beams, you can use ready-made balustrades for stairs and railings.

Step 7: Flip the bottom shelf over, place the legs evenly on it, and trace each one at the base with a pencil. Then, in the center of the drawn square, we make a hole with a thin drill so that you can see where to screw in the self-tapping screw from the front side.

Step 8. Coat the ends of the legs with glue, put them in place according to the marks and fasten them with self-tapping screws using a screwdriver or screwdriver.

Step 9. Determine the position and height of the second shelf. It slides to the side relative to the bottom, so two legs of different lengths are needed: one on the floor and the other on the top of the bottom shelf. We calculate these dimensions, cut out the bars of the required length and fix them according to the already known pattern.

Step 10. Attach the third tier, one of the legs of which rests on the bottom shelf, and the other on the second.

Step 11. We coat the finished structure with varnish or varnish or impregnate it with a protective impregnation in two or three layers.

Master class: plastic shelf

Answering the question of how to make shelves for flowers with your own hands, you can try to make a plastic shelf, which is very convenient to use. The material used is a plastic window sill, which can be ordered separately.

Before this, you need to decide what the size of the shelf will be.

1. You need to drill holes in the window sill for the legs, two on the sides and one in the center.
2. A shelf is placed on the legs and all additional elements are attached.
3. The most ideal place for such a shelf is a window, where it will look most appropriate.
4. If you wish, you can use any plastic, you can even take an old plastic basin and cut out a shelf.

It can be mounted on the wall or hung, plastic shelves can be freely installed outside, they are not afraid of sudden temperature changes and precipitation.

Master class: metal shelf

To make the shelf as strong as possible and withstand a lot of weight, you can try to make floor flower shelves from metal. But to work with metal you need to have a little experience, since this material is not as easy to process as plywood or plastic.

The materials used are:

• Metal sheets
• Dye
• Fastening elements

If you know how to forge, then order a metal vine in advance. It will serve as a decoration for the shelf and make it incredibly stylish. All that remains is to attach the shelf stand, this must be done using a welding machine.

All fasteners are added, the shelf can be painted black or bronze, and the top can be additionally coated with clear varnish. It is best to cover the legs of the shelf with felt so that it does not scratch the floor.

Such a metal shelf will serve for many years and will not be afraid of heavy large pots with large plants.

The final stage is decoration

By creating a shelf, you can create your own product design. By choosing the right materials and taking a little time, you will get a unique masterpiece!

• For example, a plastic product comes in different colors. For an original design, you can attach decorative handrails.
• The wooden shelf is painted with sequins. This gives the product shine and shine.
• Glass shelves are often decorated with patterned metal elements.

Also, for a craft to become beautiful, it is not necessary to paint it or attach anything to it. Just place vases and beautiful stones, toys, shells on it. In addition, furniture can be decorated with various fakes and toys.

Don't be afraid to experiment! Create new masterpieces and improve your skills! An indoor planter is just the beginning. Nothing brightens up your home like handmade items.

Mobility

There are stationary and mobile types. The first option means that you will not move the shelf from one place to another.

In the second case, the design has several wheels that allow the rack to change its location. The movable structure with wheels requires special care.

It is necessary to lubricate the fasteners every few months so that they do not lose their functionality.

Mobile structures allow you to change the location of the rack

Photo of homemade shelves for flowers

The benefits of creating a masterpiece yourself

The main advantage is that such work costs significantly less than buying a flower rack in a store.

To make furniture you will need a little patience, raw materials from which the craft will be made and tools.

The range of store stands is very small. Not all purchased ones are of good quality. Most often, in stores and on the Internet, there are the same type of cabinets that are found in every home. Some sections will not fit your interior or room dimensions.

When making a craft with your own hands, you have the opportunity to independently choose the size, shade, design and location of the structure. New universal furniture will only be in your home.

When creating outdoor furniture for plants, it is possible to take into account the nuances of its placement.

Build it so that the flower rack is out of the way and does not have to be walked around. You can create a sliding or moving structure that can be moved to the desired location at any time.

To make a stand, you don't have to buy something from the store. You can build a stand from an old garage cabinet or an unnecessary ladder.