A double bed is usually used by two people, who often differ significantly in their parameters. Weight, body type, spinal problems and other factors do not allow the use of a regular mattress. How can you make sure that the bed suits both of you completely? Much depends on the right choice of orthopedic mattress. Next, we’ll tell you how to choose a mattress for a double bed. We will also consider the top best manufacturers.
How to choose the right mattress size
Any choice of a mattress for a double bed begins with determining its size. Standard width parameters are in the range of 160-200 cm, and the length has only three standard sizes - 1.9; 1.95 and 2.0 m. Measurements are taken on the bed itself, and not on the old mattress. During long-term use, it deforms and the dimensions do not match. The most popular dimensions are 160x200 cm.
The length is selected according to the height of the tallest partner. The height of the product is selected depending on the filler used. In spring models - 18-24 cm, in springless models - 15-18 cm. This value does not affect the resistance of the mattress to high loads.
Dimensions of American models are indicated in inches. This must be taken into account when choosing, since, for example, 80 inches will be equal to 203 cm, and this figure does not correspond to the size of a bed made in Russia or Europe. In general, it is recommended to choose a mattress from the same brand or company as the bed itself.
The maximum load value is indicated in the product passport based on 1 berth. Multiplying the figure by two, you get the load on the entire mattress. Such calculations will be correct if the build of both partners is approximately the same, and the difference does not exceed 30 kg. Otherwise, you will have to choose the design individually.
Filling
Important mandatory elements of any mattress are fillers (video). In spring models they are located only above/below the spring block. And in springless products they are the basis.
In the first case, fillers allow you to control hardness. Even when using one spring block, you can create a soft or hard sleeping place with different combinations of layers:
- Coconut coir - a layer 1-3 cm thick is obtained by combining coconut fiber and natural latex. The material is additionally treated with bactericidal impregnation. The filler is hygienic, breathable, and environmentally friendly;
- Natural latex is obtained from the sap of the tropical rubber tree. Thanks to special technologies, the foam material becomes elastic, elastic and ventilated. The high wear resistance of latex allows it to withstand severe loads without residual deformation. In the manufacture of spring products, perforated sheets are used. Monolithic perforated blocks are placed in springless models. Latex is available in thicknesses of 2, 3, 5, 10, 14, 18 cm;
- Memolatex is also made from natural latex. A distinctive feature of the material is to follow the shape of the body, due to which minimal pressure is exerted on the body and microcirculation of blood vessels is improved. Material thickness – 2 cm;
- Memorix is an artificial material (belongs to polyurethane foam). The main advantages are the “memory” effect, strength, durability, and thermal sensitivity. Layer thickness – 4 cm;
- Sisal is a natural material and is created from the sisal agave plant. The 1 cm thick material allows air to pass through perfectly and has antistatic properties.
Mattresses use not only the main layers, but also special technical ones. Thermal felt is used to protect soft layers of fillers from spring blocks. The material is a mixture of wool and synthetic fibers.
Springless models are available with a thickness of 15-20 cm. To understand which mattress to choose for a double bed, you need to familiarize yourself with the bases/fillers:
- Polyurethane foam is an artificial material with a cellular structure (like a sponge). This is a safe material, the distinctive feature of which is its lightness. Therefore, such mattresses are perfect for folding beds. Available with a monolithic block (approximately 16 cm high) or consist of several glued layers (each 3 cm thick);
- Latex materials usually contain more than 20-30% natural material. The most expensive models have 85% natural latex. The products are available in two types - monolithic (height approximately 18 cm) and layered (usually three sheets 6 cm thick are glued together). Latex is produced with holes and by changing their diameter, different rigidity is achieved in individual zones;
- Coir is coconut fiber impregnated with latex (the usual ratio is 50:50). A distinctive feature of the products is increased rigidity and high wear resistance. Such mattresses contain several layers (3 cm thick). The most common model height is 13 cm.
Thanks to different combinations and alternations of fabrics, you can obtain products of varying degrees of rigidity and cost.
How does an orthopedic mattress for a double bed differ from a regular one?
Before talking about the differences, it should be noted that deep muscle relaxation is required for proper rest at night. During the day, the muscles constantly work to support the vertical position of the spine, while experiencing heavy loads. This leads to fatigue, and after going to bed, the load is partially removed and transferred to the mattress. Due to this, the muscles rest and recover.
In order for the body weight to be evenly distributed over the surface, the neck and back must be maintained in an anatomically correct position at night. In this case, the configuration of the product coincides with the natural curves of the spine. However, a simple mattress is not capable of this; to achieve the desired effect, a special orthopedic option will be required.
Compliance with the natural curves of the spine is achieved thanks to the special design of the mattress and the materials of the internal filler. Orthopedic products for double beds have a wide range of elasticity. This is very important because two different people have their own mass and their own need for anatomical support.
The right mattress is the key to family happiness
The first condition for creating comfort in the family is to purchase a bed mattress that does not cause allergies and improves the health of those sleeping on it. It is difficult to imagine a romantic relationship between people who have not had enough sleep, are tired, and are irritated. Another thing is when a couple has a good night's rest, people wake up satisfied and satisfied.
We choose the perfect mattress for a bed for 2 people, taking into account the existing requirements for comfort and health.
Mattresses on spring blocks: types, pros and cons
In accordance with the design features, all spring mattresses are classified as products with dependent and independent springs.
Dependent blocks use springs consisting of 4 turns. At the top and bottom they are connected by thin spiral-shaped wires. The diameter is 6-10 cm, and 100-150 springs are placed in 1 m². Due to the connection method, this technology is outdated, since when pressure is applied to a certain area, the entire adjacent area is deformed. Therefore, during sleep, the body sag and moves into an uncomfortable position.
One of the advantages is accessibility to consumers due to low cost. When using modern materials - polyurethane, latex, etc. – they are of good quality and do not require special care.
Which mattress is better to choose, spring or springless?
An independent spring block is considered a more advanced design. It includes independent springs placed in separate cases. This separation made it possible to overcome the squeezing characteristic of dependent blocks. Body weight is evenly distributed over the area, completely eliminating the so-called hammock effect.
The main differences between these blocks are the following:
- Reduced diameter – 3-5 cm.
- Larger number of turns - 7-8 pcs.
- The spring density increased to 1000 pcs. per 1 m². The higher this indicator, the higher the level of comfort.
The advantages of such spring mattresses include:
- Increased elasticity, allowing two people to sleep comfortably.
- The head and back are maintained in the correct position during sleep.
- There are no squeaks or other extraneous sounds during turns.
- The springs practically do not clog, the entire structure is reliable and lasts a very long time.
Rating of double mattresses by price and manufacturers (at the end of 2022)
| Name | What is inside | Size(cm) | Price, rub.)* |
| Ascona "Fortuna" | Independent hourglass spring block, anatomical OrtoFoam foam | 160x190 | 14990 |
| Promtex-Orient Ecopen | Orthopedic foam | 160x200 | 5385 |
| Alitte Van Gogh Roll H-25-K | Springless mattress, coconut coir | 160x200x25 | 20057 |
| Dreamline DreamRoll Latex Dual | Artificial and natural latex | 160x200x21 | 25007 |
| Promtex-Orient Duet Cocos | Independent springs, coconut coir | 160x200x18 | 30169 |
| Sontelle Vivre Custom Dream | Independent springs, struttofiber | 160x200x28 | 22153 |
| Softy Plus | Springless mattress, Ormafoam filler | 160x200 | 6920 |
| Sealy Special | Independent springs | 160x200x20 | 18200 |
| Sealy Posture Firm | Independent springs, orthopene | 80x190 | 23050 |
| Orthomax Sale 19 S1000 | Independent spring block S1000, orthopedic foam | 160x200x19 | 18490 |
| Ormatek “Pronight” with air circulation “Fresh Line” | Independent spring block “EVS 9-zone”, hallcon | 160x200 | 20500 |
| IKEA "Chareid" | Springs, cellular polyurethane foam, coconut coir | 160x200 | 14999 |
*Prices for mattresses presented in the table are subject to change
Double spring mattresses for different weight categories
Each spring model is designed for a specific weight category and the total number of users. Therefore, before buying this or that mattress, you should pay attention to its design, which differ significantly from each other.
Mattress with Double Spring block
People with a weight difference of over 20 kg have a completely different feeling of firmness when using the bed. Manufacturers calculate this figure based on the average weight of one person being 60-90 kg. When leaving this range, the surface will be perceived differently.
In this regard, it is very difficult for partners with a large difference in weight to choose a good mattress that would suit both of them at once. It is for such cases that the DS (Double Spring) block of double design was designed. In this “Duet” a small spring with increased rigidity is inserted inside a large spring.
The principle of operation of the Double Spring system is as follows: with a small weight, only large springs can cope quite well, and with increased loads, short small springs are activated. Such units are included in the Premium class segment and are distinguished by their reliability and long service life.
Mattress with hourglass springs
The manufacturer of spring mattresses with load-bearing elements in the shape of an hourglass is the company Ascona. This form contributes to the most optimal overcoming of non-standard and increased loads.
The operating principle is based on gradual compression of springs. First, the upper and lower parts work, and only after that comes the turn of the toughest middle. This design is perfect for frequent use or under significant loads. However, the capabilities of such springs are still limited: they do not like jumping, frequent sitting on the edge, extreme loads and other negative factors.
Double-sided flip mattresses
If you do not have sufficient funds, you can choose a so-called inverted mattress. Its upper and lower parts have variable stiffness due to the use of foam fillers with different elasticity. From time to time, such a mattress is turned over according to its own needs, for more convenient and comfortable use. Uniform distribution of loads over surfaces increases the service life of the product.
Springless mattresses
Latex mattresses
Latex is a natural filler. The raw material for its production is the sap of the hevea tree, which is then foamed using special technology. The milky liquid, which is highly viscous, contains large quantities of organic and mineral components.
The filler contains up to 40% rubber. After processing, it becomes elastic, elastic and precisely adapts to the configuration of the human body. Latex mattresses are characterized by antibacterial and hypoallergenic properties, high breathability and hygroscopicity. All these qualities help maintain an optimal microclimate in the sleeping area. Latex prevents the appearance of insects and harmful microorganisms.
Before buying such a mattress, do not forget about artificial latex. According to manufacturers, this material is no different from natural material. However, in practice, as user reviews show, synthetic analogues are characterized by low strength and do not last very long. Gradually they become rigid and begin to crumble and deform. The only advantage of such products is their low cost.
Coconut
When deciding how to choose a springless mattress, many people choose coconut models. The starting material is the fibers that cover the outside of the coconut. This is the safest and most environmentally friendly product, especially in demand for the production of children's mattresses.
The obvious advantages of coconut filler are:
- Natural composition.
- The rigid structure helps strengthen the spine and has a beneficial effect on posture.
- Air permeability, ability to evaporate any moisture. As a result, rotting and mold formation are prevented. Equally good for both children and adults.
- Coconut products are elastic and resistant to deformation. The optimal degree of rigidity adapts well to the body. There are only restrictions associated with excessive loads.
Durability and comfort make coconut mattresses popular among users, despite their high cost.
Mattresses made of struttofiber
Struttofiber is a non-woven synthetic material based on polyester. Initially, the fibers are subjected to heat treatment, after which they are passed through a wind tunnel, where they are treated with hot air. After this, the fibers become vertical, and thanks to polyester, they are securely connected to each other.
At the output, a web is formed in the form of an elastic mat. The main layer consists of fibers that act as independent springs. Inside, the fibers are reinforced with hardened polyester.
In addition to the main material, the following components are used in the struttofiber structure:
- Camel or goat hair as insulation.
- Linen is like a thermostat.
- Elasticity is increased with horsehair.
- Coconut coir or sisal for added strength.
The result is a three-layer structure. The layers located at the edges perform the function of fastening, and the bulk of the vertical fibers are located inside.
Polyurethane foam mattresses
If you want to choose an inexpensive but high-quality mattress, it is recommended to pay attention to products made from polyurethane foam. In essence, this is a more technologically advanced foam rubber with increased elasticity and other useful properties. Mattresses made of polyurethane foam do not cake, do not crumble or sag for a long time, provided that the operating rules are followed.
The best children's mattresses Ascona
Children's mattresses differ from adult models in the degree of rigidity, which is determined by the density of the fillers and the elasticity of the springs. Our rating includes products of both types, the best in the Askona line.
Ascona Baby Flex Sleep
Rating: 4.9
For children from infancy, a mattress with hard sleeping surfaces, such as Ascona Baby Flex Sleep, is required. It consists of a thick coconut slab that allows air to pass through and does not retain liquid, steam, and outer layers of holofiber, which creates comfort for sleep and relaxation, because sleeping on a hard surface, although useful for babies, is especially unpleasant. The cover is pure cotton, which is easy to care for - regular washing is enough for it.
The mattress is elastic and has excellent supporting properties necessary for the formation of the skeleton in the first 7 years of a child’s life. The thickness of the product is 7 cm - very convenient for children's beds with low sides, and if liquid is spilled, the water quickly evaporates from such a plate; if necessary, you can simply turn the mattress over.
The average price of Askona Baby Flex Sleep in the size 60x120 cm is 2,400 rubles.
Advantages
- Thin mattress;
- Affordable price;
- 3 year warranty;
- No deformations during operation;
- Convenient care;
- Elastic support of the child's body with coconut fiber;
Flaws
- Not defined.
Memory foam mattresses
Cellular polyurethane foam
Only sufficiently dense cellular polyurethane foam has a memory effect, providing complete unloading of the muscles, joints and spine. The minimum density is 33 kg per 1 m³.
Externally, a double foam mattress seems very rigid, however, under the influence of human warmth it becomes softer and easily takes on the required configuration. Pinch points are practically not formed, thanks to the ideal copying of the body and the absorption of dynamic and static loads. The night movements of one person are not felt at all by another and do not disturb his sleep.
A significant disadvantage of cellular polyurethane foam is its limited air permeability. As a result, in hot weather, very strong heating occurs, and in cold weather, heat is poorly retained, and the desired body shape is taken with great difficulty. The problem can be resolved by using climate control equipment in the room.
The new product emits an unpleasant odor immediately after unpacking, which completely disappears on the second day. If the mattress continues to smell bad for more than two days, then the model is defective and must be replaced.
Soy foam
This type of filler appeared relatively recently. In its parameters, it resembles cellular polyurethane foam and also has the ability to remember the shape of the body. This material is more advanced, does not emit foreign odors, and freely allows moisture and air to pass through. Therefore, mattresses with soy filling can be washed without any restrictions.
Fillers and cover
The most common fillers:
- natural materials: cotton, wool, coconut coir (pressed coconut fibers), felt, latex (filler made from the milky sap of rubber plants);
- synthetics: struttofiber, polyurethane foam, synthetic down, artificial latex, synthetic winterizer, holofiber, sponflex, spunbond.
- Sprut and Thermoflex.
- foams: Orthoflex, mineral, Spring Foam, Memory Foam, Orma Foam.
Coconut coir is a pressed fiber from the intercarp of coconuts. 100% natural material. More expensive than synthetics, it is most often found in children's mattresses. Provides free air circulation, does not accumulate moisture, has natural antihistamine properties, is environmentally friendly and elastic. It often acts as an insulating layer between other fillers and the spring block. Quite an expensive material, often replaced by a cheaper analogue - needle-punched felt.
Coconut coir mattress filler is a natural material that is used to fill mattresses.
Struttofiber is an inexpensive synthetic material. Used in orthopedic mattresses with one filler. Can be supplemented with natural additives. It quickly recovers from deformation and is characterized by high elasticity, wear resistance and elasticity. Mattresses with struttofiber are not suitable for people weighing more than 90 kg. Low-stiffness material is optimal for weights up to 60 kg. Mattresses filled with strutto of medium hardness - 60-90 kg.
Struttofiber is a modern synthetic mattress filler.
Latex. A natural product of processing the milky sap of the Hevea rubber tree. The structure is porous. The material is highly elastic and resilient. Does not accumulate moisture. In orthopedic models, zoning for different parts of the body is done by perforating latex.
Latex is artificial. Cheaper analog based on synthetics. Almost as good as the natural original.
Artificial latex is the commercial name for highly elastic polyurethane foams. Natural latex is made from the sap of rubber trees.
Synthetic down - synthetic down. Soft and lightweight artificial non-woven material with a fibrous structure. Recovers quickly from deformation. Elastic, resilient, provides good air circulation, does not accumulate moisture. It has a number of disadvantages. Used in inexpensive mattresses.
Holofiber is a polymer material with a fibrous structure. Good thermal insulation properties. Does not absorb moisture and odors. Suitable for allergy sufferers and asthmatics.
Spunbond is a non-woven polymer material. Eco-friendly, breathable, does not accumulate moisture. It is used in covers, and is also used to isolate the soft layers of the mattress from the spring block.
Spunbond is a modern, environmentally friendly material based on polypropylene fibers.
Sintepon is a group of artificial polyester materials that differ in both composition and characteristics. That is, they mean fillers that are significantly different from each other.
Foam. They are characterized by high elasticity and resilience. Provide free air circulation. Foams can vary significantly in density.
Sprut and Thermoflex are non-woven materials with a high content of natural ingredients. They are characterized by high elasticity and elasticity. They do not accumulate moisture and are not deformable.
Octopus is a modern mattress filler with sea grass additives.
There are also more “exotic” fillers, although much less frequently, ranging from buckwheat husks to algae and camel hair.
Choosing a mattress for a double bed, filling:
- Natural materials are more environmentally friendly than artificial ones, but are more expensive.
- When determining the parameters of rigidity, you should focus not only on personal preferences, but also on the recommendations of doctors. Mattresses with increased rigidity are recommended for children with an immature spine and people suffering from poor posture. Medium hardness – for people suffering from back problems. Mild – various postural disorders. Also suitable for older people and those who often sleep on their sides.
- Pay attention to whether the mattress with the selected filling provides sufficient air circulation.
A properly selected mattress will help solve problems with the spine.
Important! Some natural fillers may cause allergic reactions, which should be taken into account by allergy sufferers and asthmatics.
Double waterbeds
Water mattresses with liquid filling help to effectively relax tense muscles at the end of the day. A sound, healthy sleep ensues, without frequent night awakenings. The tightness of the product is ensured by a PVC cover with a synthetic coating. Load resistance ranges from 100 to 200 kg per 1 m³, which is quite enough for all weight categories.
Waterbeds do not collect dust, which is why they are very popular among allergy sufferers. Electricity is used for heating. The liquid inside is retained thanks to a cross-shaped grille. This design promotes uniform load distribution.
Adjustment of elasticity occurs due to additional filling from coconut coir or polyurethane foam.
The disadvantages of water structures include:
- Long heating time. A cold surface causes discomfort, so you need to wait for the desired temperature.
- Additional energy consumption. For expensive models it is up to 20 kW per month.
- Large mass of the assembled product. Hence the difficulties with transportation, finding a suitable bed, etc.
- Unreliable sealing. There is a high probability of leaks due to high pressure and external damage. In the most expensive modern designs, additional protection is installed.
How to choose the right mattress for an allergy sufferer
Mattresses intended for people with allergies should not be filled with natural latex. Instead, artificial analogues are used. In the case of a reaction to glue, models have been created in which the filler layers are fastened using mechanical staples. The mattress covers are hermetically sealed to prevent moisture and dust from getting inside. All this prevents the creation of unfavorable conditions for allergic reactions.
Among the materials that do not cause allergies, it is worth noting the following:
- Coconut coir.
- Polyurethane foam.
- Memorix.
- Struttofiber, holofiber, holcon. They belong to hollow synthetic fibers with a medium degree of rigidity.
