Installation of telescopic cornice - selection of materials

Comfort consists of many components, among which is the flawless functioning of properly selected equipment in all rooms, including the bathroom. Modern plumbing, a comfortable bath, exquisite wall and floor decoration, bright lighting - that's not all. Among the minor details, there are some that you simply cannot do without. For example, a curtain rod for a bathroom - it is on this that the curtain is held, protecting the floor and furnishings from splashing.

Let's talk about how to choose and install the cornice above the bathtub.

Advantages

The main advantage of such devices will be the ability to be installed in openings of different sizes. It is not always possible to choose a crossbar that fits perfectly in size, and in this case, a telescopic cornice will be the ideal solution.

In addition, to install other types of similar devices, you will have to use a variety of tools, and not everyone can do this. For example, not all women can boast of the skills to work with a drill or screwdriver, but you need to install a crossbar. With a sliding model, such a problem will not arise - even a child can install it.

Another advantage of this solution will be the absence of the need to drill the wall or screw screws into it - the sliding cornice for the bathroom is installed according to the principle of a spacer and no action on the wall is required. This means that after dismantling the crossbar, no traces of its installation will remain - you don’t have to worry about the safety of the wall covering.

The color scheme can be different, which will allow you to choose an option for a wide variety of interiors. However, most choose either plain white or other light colors. Often the choice is made of shiny steel-colored models.

It would be a mistake to think that a telescopic curtain rod for a bathroom can only be in the form of an ordinary pipe. There are many different modifications of this device.

You can even find two-row modifications on sale that look especially beautiful. However, such devices weigh much more and require some skill when attaching. You will have to fix not one, but two tubes at once, which often causes difficulties.

Cornice in the bathroom - design features

Despite its apparent simplicity, a curtain rod for a bathroom curtain is a rather technically interesting product that can withstand quite significant alternating loads and withstand the weight of dry and wet material during bathing. Therefore, certain requirements are imposed on the cornice:

high strength and reliability of fastenings;
the base of the cornice should be a light and durable profiled pipe or a monolithic structure;
excellent abrasion resistance and corrosion resistance;
a perfectly smooth and slippery surface to facilitate the movement of fastening elements of the curtain material.

Being in plain sight, the curtain rod in the bathroom also performs an aesthetic function and must necessarily correspond to the overall style of the room. Curtain rods for a bathroom with a beautiful curtain attached to them can visually change the space and make the simplest interior cozy and rational. Like all decorative elements, curtain rods for the bathroom are selected based on their location, the size of the opening to be covered and the weight of the curtains attached to them.

The production of cornices of complex shapes with protective decorative coatings made of nickel, chrome and other resistant metals is carried out using complex technological equipment, while simpler products made of wood or ready-made chrome-plated tubes can be made by a home craftsman independently.

By making an exclusive curtain rod, you can not only save money (most likely, a serial product will cost less), but rather emphasize the individual interior features unique to this room. But such work can only be done by an experienced craftsman, but you can install a cornice in the bathroom yourself, having the simplest skills in working with a simple tool.

What do you need to know before purchasing a curtain rod?

To choose the right curtain rod for your bathroom curtain, you need to carry out a few simple measurements and research:

determine the shape and method of hanging the cornice;
measure the distance between the attachment points in order to choose the correct length of the guide rod;
determine the strength of the surface on which the cornice will be fixed to determine the type and method of fastening and the correct selection of fasteners;
know the approximate weight of the curtain in a dry and wet state, so as not to make a mistake with the load-bearing capacity of the cornice.

Tip: All the necessary parameters for the cornice can be found in the accompanying documentation or asked from a sales consultant in the store.

Let's start the installation

After the cornice is delivered to the installation site, you can begin assembling the structure and attaching it to the wall or stream, depending on the chosen option. Before assembling the cornice, you must carefully study the instructions, lay out the elements of the cornice and the attached fasteners, and then begin assembly. The work is simple and can be done independently. After the cornice is assembled and all the parts are in their places, the actual installation of the cornice begins. Depending on how you secure the curtain rod, some power tools may be required to complete the job.

Flaws

Of the disadvantages of this solution, only a few points are worth noting. The most important thing: a telescopic curtain rod can only be installed in a bathroom that has two walls opposite each other. If the bathtub is located in the corner of the room, using such a solution will not work.

Heavy curtains made from massive materials also cannot be used - the crossbar cannot withstand the heavy weight and slides off. In addition, if you make inaccuracies during installation, the pipe will not be secured correctly and sooner or later it will slip off. You need to be very careful about the accuracy of the installation.

Brackets/curtain holders

Bathroom curtain mounts come in different types. A flange or bracket is usually used as a holder. For straight, angular and semicircular rods, two such fastenings are used - on the walls.

Holder for attaching a simple rod to the wall without drilling

With their help, a cornice is installed, the curtain on which will cover the shower along part of the perimeter.

Attaching a tubular metal curtain rod to the wall

The round flange consists of two rings - external and internal, inserted into each other and covering the ends of the rod. There are holes for wall mounting. The flange covers the installation site and makes the crossbar look solid and aesthetic.

Curtain holders are made from various materials. They may differ from the base of the barbell. This can be a metal, wooden or plastic holder. Moreover, polymer brackets today are produced quite durable.

The metal rod must be made of high-quality material, otherwise rust will appear on it

It is important to know! They do not install cornices with suspensions on suspended or suspended ceilings.

When choosing rods, they are guided not only by the potential reliability of the fastenings, but also by their aesthetic appearance. You can install products in gold, bronze or silver, streamlined or square, angular.

In design projects there are carved fasteners, as well as with a relief outer part. You definitely need to know how durable the coating will be, since cheap spraying often peels off quickly under the influence of moisture and the product becomes unsightly.

True, some projects may involve special “aging” of the material for retro room designs.

Ceiling holders for curtain rods in the bathroom

When installing curtain rods and selecting fasteners for the bathroom, you need to consider how the structure will look in the overall environment.

Materials

Sliding bars can be different not only in length or color. They can be made from different materials:

Metal options look better, but they also weigh more.

If the walls in your bathroom are made of plasterboard, it is better to choose the plastic option. It does not require such strong fixation and puts less pressure on the walls. The risk of damaging the surface is reduced.

For cases where the walls are strong enough, you can choose metal structures. They are attached using the same principle as plastic ones, but require stronger pressure to secure them.

Curtain rod for the bathroom: materials, shapes and characteristics

At first glance, separating the bathtub and shower from the rest of the room is a fairly simple task. It is enough to install the crossbar, hang the curtain and start using the structure. However, it is not. There are many features that depend on the material of the cornice, the size and decor of the room, as well as the configuration of the bath (shower).

Articles on the topic (click to view)

Washing machine repair
Curtain design for the kitchen 2022
Stylish curtains for the hall, fashionable in 2022
Fashionable curtains for the hall in 2022
Photo of interior design 2022 with curtains
Step-by-step instructions for creating Japanese curtains with your own hands
Photo of the kitchen and bedroom interior with Japanese curtains

Original spiral rod with shower holder

In bathhouses without any frills, there is often a straight crossbar installed for curtains and fulfilling a purely practical role - covering the walls and floor from splashes.

Straight rod - the most common and versatile option

But for more or less design projects, where the geometry of the bathtub and the separated area can be individual, unusual designs are used - a semicircular cornice, oval, U- or L-shaped, as well as asymmetrical. Thanks to the curves, you can maximize the protection of areas not intended for swimming.

The use of steel strings is now a rare case, since a thin product quickly loses tension and sags, which looks unsightly.

The use of simple structures, such as a straight stick (solid or sliding cornice) or a string, is convenient in small rooms with a standard layout. A suction cup or bracket is used as a holder.

When installing rods, it is important that the hand can freely move the curtain, closing it, and be able to fold the canvas so that it does not interfere after washing. A dense, moisture-repellent material is chosen as the basis for curtains. It is necessary to balance the weight of the curtain and the strength of the fastening so that the rod can withstand the planned loads.

Cornices are made from different materials:

metal (aluminium, chrome and alloy steel);

Metal models are considered the most practical

A wooden curtain rod is chosen if the apartment owners want to emphasize the originality and aesthetics of the bathroom interior design

In design projects there are combined options - steel or aluminum with natural materials, etc. They are good for bathrooms with eclectic elements and color variety. The gamma may differ from the overall design, but should fit organically into it.

Coated aluminum rod - a combined product with a durable metal base, coated with special enamel or plastic

the product must repel moisture well (have anti-corrosion properties);
The model is selected in size taking into account the height of the ceilings, bathtub and shower installation.

Curtains are hung from the curtain rod using rings (plain or with clips), hooks, loops or grommets. The latter option is only suitable for thick fabrics and is more expensive.

The simple design of small bathrooms assumes the absence of massive objects. In such rooms it is better to get by with a polymer crossbar - solid or telescopic.

Expert opinion

Smirnova Ekaterina Anatolevna

7 years of experience in interior design, professional architect

For individual projects in large rooms, a cornice with a curtain serves as a visual zoning, so you need to immediately provide design options, whether it will be classic, hi-tech or art deco.

Installation

Before installing the telescopic curtain rod for the bathroom, it needs to be adjusted in length.

To do this, you need to unscrew or, conversely, screw in the moving part of the device. The resulting length should be two centimeters greater than the dimensions of the opening in which the installation is made. To fix the cornice, you need to compress the spring by pressing on the smaller pipe and place the device between two vertical walls, then release the tube and the ejector spring will securely fix the crossbar.

Important: some models of such devices do not have a spring.
Fixation is carried out by unscrewing the part moving along the internal thread. When the desired size is reached, the pipe is clamped in the selected position with a special screw-on clamp. Such models are less reliable in operation and are practically no longer available for sale.

Before fastening, it would be useful to make markings using a tape measure and a building level.

Using a tape measure, you should not only mark two points for fixation, but also measure the length of the opening at the attachment point. This will allow you to adjust the crossbar length with sufficient accuracy. A level will be needed to check the horizontal position of the cornice.

"load...

When purchasing a curtain rod for a bathroom, most people first think about the attractiveness and ease of installation of the structure. The telescopic bathroom rod perfectly meets these requirements.

It's an attractive and fairly durable system that anyone can install and only take a few minutes to complete. Made from high-quality modern materials, the fastening system will not create much trouble during operation and will not require special care. True, in addition to many positive qualities, the barbell also has a number of negative properties.

Installation of curtain rods of various configurations

Almost all models are mounted in the same way - using flanges mounted on the walls. However, there are nuances that distinguish the installation of straight and angular, flexible and rigid, telescopic and solid products. If you wish, you can make a convenient device yourself from scrap materials.

Let's look at the features of installation of various types, but first a few words about the tool.

You will need marking material (pencil, tape measure, level, square), a construction knife, a hammer drill with 5 mm drills (for concrete or tiles), a screwdriver, fasteners (dowels, screws or screws can come with the cornice). When selecting fasteners, be sure to take into account the material of the walls and ceiling.

Installation of telescopic structure

Cheapness is not yet a reason to purchase this unreliable model for the bathroom if you have children in your family. The mechanism for fastening the telescopic device is such that it can easily support even a wet curtain, but it is unlikely to be able to support the weight of a small child if he slips and grabs the curtain.

A telescope rod is equipment that resembles a stand or small shelf that cannot withstand additional pressure.

The most inexpensive sliding cornice made of plastic costs 230-250 rubles, a telescopic rod with a metal guide pipe costs 550 rubles and more

If there is nothing to fear, and you nevertheless purchased a telescopic device, then you can immediately install it without prior preparation. The only tool you will need is marking material; no drilling of walls is required. The sequence of actions is as follows:

Determine the mounting location. Make sure that it is not too low, but maintain a distance from the ceiling (15-20 cm). You can check by looking at the curtain - its edge should fall freely into the bathtub, and not be located above its edge.
Mark the mounting location with a pencil or washable marker. It is better to use a level and carefully ensure that the cornice is parallel to the edge of the bathtub.
Unwrap the packaging and check how the mechanism functions.
Read the short instructions that come with the product.
Extend the cornice to the required length, adding a little more (0.5-1 cm).
Use curtain rings or hooks if they are permanent.
Install in a pre-marked place, check the reliability of installation.

As you can see, installation is easy and takes only a few minutes of time.

When choosing one model or another, make sure it matches other bathroom accessories. Silver, chrome and nickel plated products are popular, as they go well with plumbing equipment

Features of installing a rod with flanges

Prepare a pencil with a tape measure to accurately mark the mounting location, a hammer drill and a screwdriver. As fastening materials we will use self-tapping screws and dowels, which are supplied in the kit (if not available, you need to take care of purchasing them in advance). Sometimes the screws are tightened with a special hexagon that comes with them. On the wall we mark two points for attaching the flanges. The distance between them is the length of the rod.

We calculate the height above the edge of the bathtub in the following way: subtract 20 cm from the length of the curtain (the length of the curtain will be lowered into the bathtub).

We take the first metal flange and apply it with the center to the marked place. They usually have a round shape and 3 holes for screws

Place dots in the holes with a pencil to indicate drilling locations. We remove the flange and use a hammer drill to make three holes at the marked points. We insert the dowels, reattach the flange and screw it with self-tapping screws. We repeat the same thing on the other side.

Before installing the rod, we put reflectors on it - metal round strips that cover the working part of the flange. We insert both ends of the tube into the holders and fix them with special clamping bolts

We move the reflectors tightly to the wall - the work is finished. Usually, in the instructions, in addition to the order of work, there are some explanations for the installation of products of various types. Please read them carefully before proceeding with installation. For example, the manufacturer often pays attention to such a minor nuance as the location of the clamping screw on the rod (usually with the head up).

At first glance, it’s a trifle, but in fact, only this position will ensure stability and avoid sagging.

The advantage of models secured with flanges or brackets is obvious: in addition to the plastic curtain, they can easily hold a towel or robe thrown over the crossbar

How to fix a corner cornice?

Corner structures are usually called structures that have one or more corners, since curtains usually cover a bathtub installed in the corner of the room. They differ only in that they are longer and, accordingly, require more reliable fastenings.

If the rod is made of steel and has sufficient weight, the bend points - the corners - may sag, so they should be fixed. To do this, they use the hanging method - they install another fastening ring on the rod and use it to “hang” the corner to the ceiling.

Many models of flexible aluminum curtain rods are attached in a similar way: first, brackets with holders are fixed to the wall, then a metal strip is inserted into them, which must be given the required shape in advance

Some corner cornices have an arc shape, that is, there are no corners at all, but the supporting pipe is smoothly curved. Such devices are most suitable for asymmetrically shaped bathtubs located in a corner or niche.

It is possible to attach the pipe without additional insurance, but over time the middle of the structure may sag due to the weight of the curtain and its constant use

Installing a corner curtain rod in a bathroom is no different from installing a straight rod. In the same way, the locations are marked, the brackets are fixed and the pipe is inserted into them.

Telescopic curtain rod: advantages and disadvantages

A telescopic rod consists of two pipes (one has a smaller diameter and is placed in the second) and two parts that serve as support points. This structure allows the product to expand to the desired length, resting against opposite walls. Working as a spacer, such structures are easy to install due to the presence of a rotating fastening mechanism.

Such systems can only be direct, i.e.

because they need two opposite planes. Recently, you can find a design in the form of an arc, but such a rod must have special suction cups, otherwise it will sag under the weight of the curtain.

Telescopic curtain rod for the bathroom has the following advantages:

ease and speed of installation;
relative cheapness of systems;
strength sufficient to withstand standard vinyl or polyethylene curtains;
attractiveness, ability to be used in various styles;
the use of the structure does not damage the wall surface.

The system also has its drawbacks.

Such a rod cannot be used with a corner bathtub. The design is straight and is used only in small bathrooms or rooms with appropriate repairs and installation of two opposite planes (niche-type arrangement).
Curtains hung on such a product should not be massive or heavy; the system may not be able to withstand it.
If mistakes were made initially during installation, the spacer will gradually slide down the wall and eventually collapse.
Telescopic rods are not made from very heavy materials; they may simply not support their own weight.

In some cases, spacer bars are the ideal solution. If it turns out that for some reason they are not suitable, they can be easily dismantled and another option chosen. In this case, the surface of the walls will not be damaged, and the cost of the product is not so high as to cause a serious blow to the wallet.

Tips for choosing a cornice

Using the right system, the process of choosing curtain rods and curtains for a corner bathroom will be simple. In this case, you should take into account not only the shape and type of material, but also choose the right fasteners and curtains.

So, in order for the design to be reliable and serve for a long time, you need to follow certain recommendations:

Choose a high-quality design (this will protect the product from damage and ensure safe operation).
A non-metallic corner cornice for a bathroom will be subject to sagging, even with the use of additional fastening parts, so you should opt for a strong analogue.
It is better to strengthen the rods using self-tapping screws (this method is valuable for achieving greater practicality).
When installing a U- or L-shaped cornice on the ceiling, it is better to first calculate the length of the curtain.
If you take frequent showers, the design should have a beneficial effect on emotions (this factor must be taken into account when choosing decorative elements).
When choosing a corner curtain for the bathroom, you should focus on ease of care and aesthetics.
To use a non-standard solution, it is worth inviting a specialist who will take measurements and carry out the appropriate calculations (in this case, any errors will be excluded).

When the choice is made, you can begin the installation process.

Materials and forms of telescopic curtain rods

The following materials can be used to make telescopic curtain rods.

Aluminum. Lightweight and unpretentious material that is not subject to rust and will perfectly withstand standard curtains. It is not as durable as stainless steel, but can last for many years without replacement or repair. It can be painted in the desired color, which will allow it to be used in any interior.
Plastic. By far the cheapest and most common option. It will not last very long, but due to the price, the product can be changed at least every year. The advantages include a variety of color options, the ability to choose a product with a wood, metal or even leather finish. Obvious disadvantages are a short service life and a tendency to quickly become dirty.
Wood. This option is not used so often, but sometimes attracts with its originality. A wooden rod must be treated with a special compound that will prevent changes in the structure of the material. Positive aspects - attractiveness, aesthetics, uniqueness. Minus - it may swell over time in high humidity conditions of the bathroom, then the curtain rod will be difficult to remove. And such products are not cheap at all.

Main features of plastic, metal and combined rods

Curtain rods, depending on the materials used in their manufacture, can differ significantly in their characteristics:

Plastic rods. They have an excellent appearance, light weight, and quite affordable prices. During the process, they practically do not make any sounds. This is their big advantage, although there are also quite serious disadvantages. For example, over time, such products quickly lose their color and shape. In addition, things made of plastic are not designed for heavy loads, so unless you bought a rod made of special high-strength plastic, do not try to hang heavy curtains on them.
Metal. These are the most common models, made of stainless steel, brushed aluminum and other metals. They cost an order of magnitude more than plastic ones, but they are more durable, which is why you can hang heavy curtains on them. When purchasing such curtain rods, be sure to pay attention to the rings supplied with them. Metal rings make a lot of noise when moving, and plastic ones are too fragile, so the best option in this case would be to use combined products made of metal-plastic.

Plastic rods have an excellent appearance, light weight, and also quite affordable prices

Cornices made from combined materials. Typically, such products combine metal and plastic in their design. As a result, they acquire high strength characteristics combined with a low level of noise they emit.

If we consider metal curtain rods separately, then when choosing them, it is imperative to take into account the properties and qualities of the metals from which they are made. For example, aluminum perfectly withstands moisture and chemicals, as well as temperature changes. At the same time, products of this type weigh little, but are very durable, but what is unpleasant about them is their matte surface, which does not look very good against the background of modern finishing materials.

Aluminum perfectly withstands moisture and chemicals, as well as temperature changes

Chromed steel products look great in any interior, and they are very durable. Your children can even hang on them; such curtain rods will not break or bend. In addition, rods of almost any shape and even a cornice for an asymmetrical bathtub can be made from metal, although the cost of such a product can be quite high.

Chromed steel products look great in any interior, and they are very durable

This circumstance is worth keeping in mind when choosing a suitable bath bar.

How to install a spacer bar with your own hands?

Installation of a telescopic curtain rod in the bathroom does not require preliminary preparation and takes only a few minutes. You just need to decide on the installation height, which depends on the length of the curtain, and get to work.

All curtain rods come with clear instructions on the installation process; you just need to follow the rules and everything will work out.

In the case of a telescopic rod, everything is especially simple. The rod is assembled, its length is set plus 2 cm, the protruding element is placed at the point at which the fastening will take place, and the rotary (or spring) mechanism is simply released. The system does everything itself, all that remains is to hang the curtain.

The same principle applies to vertical bathroom rods, to which functional shelves are attached.

Assembling a sliding cornice

In order to properly install the telescopic rod in the bathroom, you will need a pencil and it is advisable to use a building level. You should proceed as follows:

Mark the location of the device with a pencil. At this stage, you need to know how to hang the curtain correctly: its bottom edge should fall into the bathtub by about 20 cm.
Print the packaging and spread the curtain rod to a distance equal to the distance between the walls of the room, plus 0.6-1 cm.
Place rings on the pipe or secure hooks.
Secure the barbell to the marked locations.

Important! The final horizontal position of the cornice is determined by the level of the building.

Of course, anyone can cope with the task of installing a curtain rod in a bathroom. The main thing is to observe several important points during the installation process.

Conclusion

The telescopic design is an ideal solution for a standard and not very large bathroom. It will withstand light curtains and will delight you with its attractiveness and ease of care. If desired, the system can be easily dismantled; after this there will be no traces left on the walls.

Among modern analogues of similar models, there are also more interesting products, but telescopic-type systems will not lose their well-deserved popularity and consumer recognition for a long time.

Modern life has one negative feature: too fast a rhythm, bustle and a lot of workload.

That is why the house has acquired an even deeper meaning than before: everyone tries to create comfortable conditions in it in order to be able to relax and unwind. For this purpose, repairs are being made, the most modern and convenient devices are used, one of them is a telescopic curtain rod for the bathroom.

Photo of mounting for curtains in the bathroom

Why do you need a bathroom curtain?

This piece of furniture can perform several functions simultaneously:

Zone the space separating places for water procedures.
Prevent water from spraying onto the floor and furniture.
Help create a good microclimate while taking a shower.
Be an integral part of the decor.

Important! For many, the last point is unimportant - solving more practical problems comes to the fore, which is quite justified. Comfortable curtains that harmoniously fit into the overall design concept can serve as a connecting point between the floor, walls, and ceiling. In this case, everything will depend on the idea of the project.

Attaching curtains is of great importance: safety depends on the reliability of the rod. During water procedures, the free edge of the curtain is located on the inside of the bath. This helps prevent water from getting on the floor. That is why the canvas experiences increased load, since additional resistance is created by the flow of water that hits its surface. When deciding how to install a curtain rod in your bathroom, you need to consider these factors.

Choosing a curtain mount

The bathroom is one of the rooms in the house that requires the use of only high-quality finishes and accessories. This need arose due to the presence of high humidity, and the room also requires a high degree of comfort.

One of the accessories that you simply cannot do without in the bathroom is a curtain. It is best at preventing water from splashing when swimming or showering.

The curtain component is a multifunctional metal telescopic curtain rod. It is thanks to this that it is possible to mount this product on the bathroom wall.

Curtain rod mounts

The installation of the selected variant of the rod has a number of features, both in terms of the technological work carried out and in terms of the layout of the fastening units themselves.

The simplest in terms of installation and the easiest to use available tools is a telescopic rod . This is the most common type of rods that have locking plates in the middle. Installation is carried out by installing plastic plugs at the ends of the rod and securing the rod itself by simultaneously applying maximum force to the opposite walls. When installing such a structure, you need to pay attention to how the curtain will be suspended; if solid rings are used for this, then they must be put on the rod before installation.

Telescopic rods

Plastic fasteners-plugs used in a curtain rod of this type can be pre-installed using silicone sealant or with a self-tapping screw. The use of metal fasteners will require marking and using a hammer drill to make a hole in the wall.

Individual rods can be installed using the spacer method and using a screw element . A screw thread assembly is pre-installed inside the rod. The movable screws are installed in plastic spacers on the walls and, using a wrench, are unscrewed until they give the rod the required rigidity. Later the screws are covered with decorative covers. A special feature of this spacer installation method is the need to monitor the tension so that excessive tension does not lead to deformation of the rod profile, especially those made of plastic.

A rod installed using anchor bolts in addition to the attachment points on the walls, may have additional installation locations for supporting rods. For wall mounting, and these are mainly straight rods and arc ones, they are installed on special fastening units on the walls. The location of the wall fastening element is preliminarily marked on the wall, then a hole is made for an anchor bolt or plastic dowel. At the final stage, the rod itself is installed in the fastening element and clamped with screws.

Rod with anchor bolts

Additional support points in arc, corner or hanging rod models are usually attached to the ceiling, although it is possible to install them to a support placed on the floor. Such an additional element is connected to the rod by means of an additional clamp that tightly encircles the rod. For bathrooms with a plasterboard ceiling structure, it is important to correctly calculate the installation locations of metal profiles even before the installation of the ceiling support element, and to secure the installation of electrical wiring by preventing the conductors from coming into contact with the metal parts of the rod.

For structures intended to be installed above a free-standing bathroom, the ceiling mounting option can be implemented either in the form of a rigidly fixed model or suspended on flexible elements - for example, on decorative chains or rods.

Mounting spring

A special feature of the rod is the ability to expand and fold according to the principle of a telescope: one tube is placed in another. At the ends of this device there are fasteners equipped with gaskets.

They protect the surface of the walls from scratches and other mechanical damage. It is better to install this product using spring locks.

There are several options for cornices, which differ not only in the material of manufacture or price, but also in other characteristics:

Metal cornice.
Wooden rod.
A device made of plastic.

A curtain in the bathroom is a necessary safety measure

Materials used for manufacturing

For such a relatively simple element that does not require outstanding strength characteristics, the element can be constructed from traditional decorative materials:

Plastics;
Metal;
Metal with polymer coating;
Metal with anodized coating.

Each of the presented construction materials has its own positive and negative sides, which significantly influence the choice and use of a bar in the bathroom. The method of fastening the structure also depends on the material of manufacture, because for some materials the use of a spacer in the form of an internal fastening unit is simply impossible.

Using plastic as a material for a curtain rod in a bathroom allows you to get rid of such unpleasant aspects as rust, metal corrosion, darkening of the surface and peeling of the paintwork. Such rods are durable and convenient for non-standard solutions, for example, when arranging curved rods for curtains.

The use of straight-shaped plastic rods with plastic fixing elements, without metal structures, significantly reduces the cost of installation and operation, because the absence of metal guarantees the absence of corrosion in the connecting elements. The negative side of plastic is its relative fragility, especially in models made by unknown manufacturers, the need to periodically tighten connections and monitor fixation points.

Metal rods for bathroom curtains are used most often today; the rigid design of the fastening elements and the metal itself allows such an element to be used more often. The metal rod allows you to provide several options for attachment points and fixation points. Metal rods are durable and do not require special care; most of them have either a polymer coating, in the form of a layer of plastic, or paint and varnish in the form of a layer of alkyd enamel. At the same time, metal in such a specific room as a bathroom with high humidity without working ventilation is susceptible to corrosion, which must be taken into account when choosing a model.

Polymer-coated metal rods for bathroom curtains fit perfectly into any interior, because a huge range of plastic colors and patterns very easily solves the problem of matching all design components. The plastic coating of metal rods reliably protects the metal from moisture and gives the structure additional rigidity. Plastic makes it easier to maintain and extends the life of this barbell.

Curtain rods made from light alloys, for example, aluminum, can have a decorative metallized coating. Metal structures in the form of a profile are most often used in the design of complex profiles - curved, angular, round and oval. The advantage of this version of the model is its simplicity and elegance, which can emphasize the individuality of the room design project.

Hardware

A telescopic curtain rod made of metal is a high-quality device that has the following options:

Stainless steel product. It is an example of style and harmoniously complements any design. Best suited for a children's room, it will also perfectly decorate a bedroom, living room or balcony. The material from which the cornice is made is very durable and reliable. It is practically not affected by moisture. This quality is enhanced by the protective coating, made in various colors. Chrome or white products look great.

Stainless steel is an excellent material for the bathroom

Aluminum rod. This decorative element not only looks great in any bathroom, but is also lightweight and durable. For finishing, various materials are used, including a special film that imitates various types of coatings. This product has a high degree of protection against negative factors and works well in conditions of high humidity.

Aluminum product

How to secure a curtain rod in the bathroom so it doesn’t fall - summing it up

At the end of the article, we will briefly describe the pros and cons of different types of fixation. Which one to use is up to you. We have described them from the simplest to the most complex and reliable.

Felt stickers . The cheapest option. But over time, the felt cakes and holds the barbell worse. We recommend purchasing a set of 6 or more stickers.
Mounting tape . A good way to attach a rod, it has the best price-quality ratio. High-quality double-sided tape, will last a long time.
Sealant . The optimal option for fixing the curtain rod. A high-quality sealant will last for years, and dismantling it is a matter of five minutes.
Universal fastenings . This method is more difficult than others in terms of installation. You'll have to fork out more for fastenings. But you can easily remove and install the bar.

In the article, we tried to answer the question as best as possible: how to fix a curtain rod in the bathroom so that it does not fall without drilling. If you know other options, share them in the comments. We hope the article was useful to you. Don't forget to share it with your friends!

Plastic devices

Plastic is an economical, lightweight and durable material. These qualities were transferred to the product made from it.

A plastic curtain rod for a bathroom has a lot of positive qualities:

Low price, and as a result, high availability of the product.
Light weight, which means ease of transportation and installation.
High resistance to rotting, which makes the cornice ideal for use in the bathroom, and is also perfect for the garden.
A variety of coatings that imitate wood, marble and other natural materials. Allows the product to fit harmoniously into any design.

Plastic structures can be chosen in any color

There are several disadvantages of the plastic device:

Under the influence of time and other factors, the material may acquire a yellowish tint. This becomes especially noticeable on cornices that are white.
During operation, the product may sag under the weight of the curtain.

How to choose a cornice?

You need to make a choice between low price and high quality. But experts say that the quality of the fastening also affects the reliability of the product.

To choose the right model, you should pay attention to the following characteristics:

Bath shape. If it is angular, the cornice should be L-shaped, if square, U-shaped, if oval or rectangular, straight;
Bath location. If it is in the center of the room, U-shaped or round cornices are suitable;
Mounting method. It's best to go to the ceiling. But if it is tensioned, then to the wall;
Material of manufacture. The best are steel ones. They are strong and durable. But they are more difficult to care for and expensive. Plastic ones are cheap and easy to care for. But they are not very durable and begin to turn yellow after a while.

Wooden cornices

Wood is a wonderful material.

It has high decorative properties and environmental friendliness. These cornices will decorate your bedroom and living room. Its disadvantage is its susceptibility to swelling and deformation when exposed to moisture.

Modern technologies have solved this issue: the use of special processing has made it possible to endow the wood with high resistance to the influence of negative factors. The cornice made from it looks very impressive and rich.

Wooden products are rarely used in the bathroom due to the material's sensitivity to moisture

How to cut curtain rods?

In order to shorten a double-row ceiling cornice with rotating elements, you need to carefully, holding the decorative hood, disassemble it on the side you need, move the hood, remove the rotating element and saw off the extra piece of the profile.

Interesting materials:

How to bandage bath brooms? What's wrong with a turbocharged engine? What are the benefits of hard goat cheese? What are the benefits of oatmeal porridge? What to feed toy terrier puppies? What is attractive about the profession of an architect? What is Evgeniy Aleksandrovich Yevtushenko famous for? What is Nikita Kozhemyaka famous for? How to dilute cefotaxime intramuscularly? How does chromium react?

Installation of cornice in the bathroom

Installing a sliding cornice does not require special knowledge and skills. There is no need to use any specialized tools during the process. Therefore, installation can be done by yourself.

Installing a curtain fixture in a bathroom requires a ladder, a pencil or other writing instrument, a tape measure, and a level.

Since the cornice is produced in various lengths, differs in size and is moved apart by the required number of meters, the question of how to cut the rod disappears by itself. There is no need for this action; you just need to purchase a product of the appropriate size.

Installation of the product is carried out in several stages.

There are clear instructions for this:

The first step is to determine the size of the space between the two walls that will serve as a limit for the cornice. To create harmony and beauty, the product should be mounted in the bathroom at a distance of about 15 centimeters from the bathroom ceiling. The curtain should be long enough to cover the bathtub or shower stall. After completing all the calculations, you can mark on the wall the places where the cornice will be attached.

Marking the future rod mount - the first stage

At the second stage, the question arises of how to install the product.
This is done quite simply. The curtain rod removed from the packaging is extended to the required length, equal to the distance between the walls, increased by one centimeter. One edge of the cornice is pressed tightly against the surface, and the other is pushed from the bottom up to the required point. Thanks to the presence of springs, the rod is securely attached to both walls. An additional guarantee and protection against slipping are gaskets at the ends of the fasteners. Thus, the cornice is mounted without a single nail, and the surface of the tile remains intact, which is very important, for example, for a children's room.

Product location

The third step is to check the reliability of the sliding device. To do this, just lightly press on the middle of the cornice. However, before attaching the rod to a permanent place, you should hang rings on it for hanging curtains.

In order for the curtain to move smoothly around the device, it is necessary to select the ideal rings and install the structure correctly.

The perfect combination of beauty and functionality

What facts you should know:

Made of metal, these products have good grip on the surface of the rod, but poor sliding.
Plastic rings wear out quickly and are a short-lived device.

Attention! It is necessary to remember that the most convenient to use, allowing them to be used for a long time, are combined products.
Their base is made of metal, and their coating is made of plastic.

Choosing a curtain rod for the bathroom

In order for a curtain for a bathtub or shower tray to be as functional as possible, you need to choose the right rod for it. Three factors are important: shape, material and method of fastening.

The cornice should follow the shape of the shower tray or bathtub. At Leroy Merlin you will find rods for rectangular, oval, corner and asymmetrical models.

Form

The curtain rod can be flexible or rigid. Flexible is suitable for bowls of non-standard shapes; it can be easily bent around the perimeter of a bathtub or shower tray.

Mounting methods

When purchasing a rod, in addition to the accessory itself, you receive a set of parts, without which fastening the structure is simply impossible. It is important to know that fastening can be done in one of several possible ways:

Securing the bar yourself is not difficult at all if you follow certain instructions. To do this, you need to assemble the structure together, following the existing assembly diagram, after which you will decide on the location and make marks on the wall or ceiling, depending on the mounting method.

Using a puncher, it is easy to make holes for dowels at the marks. After this, attaching the rod to the ceiling or wall will be a snap.

By material

A variety of materials can be used for manufacturing, each of which provides the model with both a number of advantages and a number of disadvantages.

Plastic

The plastic crossbar has a number of undeniable advantages, including:

low cost;
availability of choice of colors and textures;
easy to clean using plain water, soapy water and a soft cloth or sponge;
practical movement of the curtain on a plastic surface.

The disadvantages of plastic structures include:

the ability to change the color of the rod over time;
sagging under the weight of the curtains;
the need for frequent cleaning due to the accumulation of dirt;
A plastic stick looks much cheaper than similar options made from other materials.

Metal

Metal models, the material of which can be aluminum or bronze, are a more expensive and practical option, which has a number of advantages over other models:

resistance to moisture, corrosion, temperature changes;
lightness of construction and at the same time strength;
ease of installation;
durability;
beautiful appearance that fits perfectly into any interior design.

As for the disadvantages, there are also some and they directly depend on the type of frame metal used - bronze or aluminum:

aluminum - a stick made of this material has a surface very similar to plaque. The slightest load can lead to deformation of the structure. If you use metal rings to fasten the curtain, this will lead to excessive noise when using the curtain. That is why it is better to choose rings made of aluminum coated with plastic;
Stainless steel is an expensive and high-quality frame that will last for many years. They are distinguished by high strength and the ability to take the desired shape. If desired, such rods can be finished in silver or gold; bronze is also often found.

Tree

Due to the fact that during manufacturing, wooden rods are impregnated with a special solution, they are not afraid of moisture and perfectly repel water. But even despite this, it is difficult to call this option durable and reliable.

Most often, such models are used for original designs, where practicality is not in the first place; it is then that their spacer and installation are justified.

Combined

Recently, many have given preference to combined models that combine metal and plastic. Often this is a durable metal that is not subject to deformation, which can be bronze, coated on top with plastic or special enamel.

Such rods perfectly combine all the positive qualities of both plastic and metal rods.

Expert opinion

Smirnova Ekaterina Anatolevna

7 years of experience in interior design, professional architect

No less important is the color of the bar, which can be selected depending on the color scheme of the bathroom. Also, if desired, the structure can be decorated with decorative details applied with waterproof paint.

Advantages of the solution

The most significant advantage of using such structures will be the space and speed of installation. For installation you will not need any tools at all, except for a tape measure and a pencil to apply the markings. In addition, there will be no damage to the walls between which this device will be mounted.

The second significant advantage of the solution will be the relative cheapness of such cornices. They cost significantly less than all similar rods made from solid metal parts. At the same time, the appearance of suspensions with a telescopic mechanism is in no way inferior to similar products without an extension function.

Another important advantage will be the ability to choose the design of the bar. It can be of a single color, imitate any materials like bronze or wood, and also have a decorative design of the supporting platform. The photo below shows an example of such decor.