Square cover for stool
Dimensions: 50cm by 50cm.
We will need:
- yarn, 100% acrylic, color selection according to your wishes - only about 100g;
- hook No. 2.5.
Description
We begin to knit a cover for a stool by crocheting a chain of 5 VPs. We close it into a ring with a connecting post. Next, we knit the cover according to the instructions in the pattern:
- 1st row: 3 VP lifting, 2 double crochets in the 1st VP lifting, 2 VP, * 3 double crochet. with nak. in the ring, 2 VP* - from * to * repeat twice. Only 4 times. Complete the row of connections. column.
Next, knit according to the pattern for the 5th row. inclusive.
Change yarn colors randomly in each new row. Crochet 9 squares and connect them together in the last row.
Tie the cover on the stool around the perimeter in a circle with 1 post next to it with capes. Thread an elastic band or cord between the double crochets.
Sizing
In order to take the correct measurements, you should choose the style of the cape. It could be:
- a cover that follows all the contours of the furniture, covering or not covering the legs;
- product in the form of a cross covering the back, seat, armrests;
- a rectangular cape covering only the back and seat;
- covers for the seat and back, knitted separately;
- a cover for chairs that covers part of the back only in the place where the head of the seated person is located.
The most difficult thing to take measurements for is a one-piece cover. You will need to measure all the parts of the chair and repeat their outlines. Start knitting from the bottom, measuring the girth of the place to which the cover will hang. Knit the fabric up to the level of the seat, then form the back. Lastly, the armrests and the inside of the furniture are taken care of.
If the chair is at hand, it is easier to adjust the size of the product directly to it. You should take into account the properties of the threads from which the cape is made. If they can shrink, then you need to add a few centimeters to all parameters.
For the cross cape you will need the dimensions of the back, seat and armrests. We must not forget that the product should hang down at all ends. Exactly how much depends on the desire of the craftswoman. The hanging part along the back should be of such length that the cape does not slip off, the same applies to the armrests. If desired, you can attach it with buttons or Velcro to further secure the product.
The length of the overhang is equal to the thickness of the seat, approximately 10 cm, but this parameter may vary depending on the knitter’s idea.
The cover for just the seat or just the back is made exactly according to measurements, taking into account the shrinkage of the fabric. The product must tightly cover part of the furniture and be fixed on the back side with an elastic band, Velcro, or other means. A knitted cape for the headrest of a chair can be of any shape and size. It rather serves a decorative function and is made using the same technique as other products, for example, a pillow lying on a furniture seat.
Correct sizing
A cover that completely covers the furniture
Product in the form of a cross
Rectangle cape
Cape for the head of the chair
Red stool cover with embroidery
Size: Ø28cm.
We will need:
- yarn, 100% cotton, 100g per 392m, red melange – 100g;
- the same, red – 20g;
- some white and orange yarn;
- hook No.3.
Description
We begin to knit a cover for a stool by crocheting a chain of 2 VPs using melange yarn. We close them in a circle SSt. Next we knit:
- 1st row: 1 single rise, 5 sc in the resulting ring. Finish the row using conn. Art.;
- 2p.: 1 VP lifting, 1 RLS in VP lifting, * 2 SC in the next row. RLS previous R. from hook* – from * to* repeat 4 times, 6 times in total. Finish the row using conn. Art.;
- from 3rd r. on the 28th row: perform RLS, evenly increasing their number in each row. on 6 columns. Every r. finish SS. Cut the thread;
- RUR 29: connect red yarn, 1 st. lifting point, 1 sc in the previous sc. R. from the hook. Finish the row using conn. Art.;
- 30r.: 1 c. p. rise, 1 sc in the sc of the previous row. from the hook, SST;
- 31r.: 3 c. p. rise, 1 sc in the sc of the previous row. from the hook, SST;
- 32r.: 3 c. p. rise, 1 sc in the sc of the previous row. from the hook, SST.
Assembly and finishing
We carry out embroidery according to the pattern using a stem stitch. Thread the elastic band through the double crochet row 32.
Knitted sweater, crochet bag “Popcorn”: ideas, photos
If you are planning to knit a sweater and are looking for a suitable pattern, then crochet it with the “Popcorn” . It will turn out very stylish and original. Here are ideas and photos of a knitted sweater and bag in “Popcorn” :
An original jacket for a girl is knitted using purl stitch, and the crocheted pattern is popcorn.
Knitted sweater with knitted “Popcorn” crochet
The bag is completely crocheted - interesting and bright.
Crochet knitted bag "Popcorn"
Brown stool cover
Size: Ø28cm.
We will need:
- yarn, 100% cotton, 100g per 392m, brown melange – 100g;
- the same, gray – 20g;
- some white, red and orange yarn;
- hook No.3.
Description
We begin to knit a cover for a stool, like the previous knitted covers, by crocheting a chain of 2 VPs with melange yarn. We close them in a circle SSt. Next we knit:
- 1st row: 1 single rise, 5 sc in the resulting ring. Finish the row using conn. Art.;
- 2p.: 1 VP lift, 1 StBN in VP lift, * 2 StBN in the next. StBN previous R. from kr-chka* – from * to* repeat 4 times, 6 times in total. Finish the row using conn. Art.;
- from 3rd r. on the 28th row: perform RLS, evenly increasing their number in each row. on 6 columns. Every r. finish SS. Cut the thread;
- RUR 29: connect red yarn, 1 st. lifting point, 1 sc in the previous sc. R. from the hook. Finish the row using conn. Art.;
- 30r.: 1 c. p. rise, 1 stbn in sc of the previous row. from kr-chka, SST;
- 31r.: 3 c. p. rise, 1 stbn in sc of the previous row. from kr-chka, SST;
- 32r.: 3 c. p. rise, 1 stbn in sc of the previous row. from kr-chka, SST.
Assembly and finishing
We carry out embroidery according to the pattern using a stem stitch. Thread the elastic band through the double crochet row 32.
Decoration options
If a cover for a stool is knitted to insulate the furniture or increase the level of comfort, you need to decorate the finished product. Original decor will refresh the interior and help you place the right accents. The following design options are popular:
- Drawing of the canvas. Unusual ornaments, patterns, and weaving patterns look attractive without additional elements.
- Lace edge, tassels, strong border. Optimal for square models.
- Pompoms. They create a playful atmosphere and look great in the interior of a children's room.
- Embroidery. Cases with such decor will become bright and expressive. Experts do not recommend using voluminous patterns or beads.
- Fabric bows. It is important that the details match the color of the cape; decorations are usually placed on the backs of chairs.
- Rhinestones, beads, beads. Used on one-piece capes and backrest products. A prerequisite is that the decor should not interfere with the full use of the furniture.
Knitted leg warmers are trending and are worn on the legs of stools. Accessories are easy to create with your own hands and serve as a harmonious addition to the cases.
Covers crocheted on a stool should organically fit into the interior of the room in color and texture. Stylish handmade models allow you to realize interesting creative ideas. Thanks to the wide variety of patterns, unusual patterns, and decorative methods, any craftswoman will be able to choose an option that is ideal for her skill level.
Case made of motifs
Dimensions: 27cm by 27cm.
We will need:
- yarn, 100% cotton, 150g per 225m – white, lilac, violet colors – 150g each;
- hook No. 3.5.
Patterns:
- for the main motive we dial 2 air. p. and crochet from the 1st r. on the 14th r. scheme;
- for leaves we collect 2 air. p. and crochet from the 1st to the 4th r. cx.
Description
We need to connect nine motifs along cx. and connect them into a common square canvas. It is advisable to tie the finished product, like all stool covers, in a circle. We crochet 16 rows of sc, alternating colors:
- from 1st to 3rd r. – purple yarn;
- from 4th to 6th r. – white;
- from 7th to 9th p.m. – purple;
- from 10th to 12th p.m. – lilac;
- from 13th to 15th r. – white;
- 16 rubles - purple.
We knit 8 leaves according to the pattern, alternating the colors of the threads.
You can decorate the covers with tassels, ruffles, etc. We suggest crocheting a chain of VP with a length of 32 cm using three threads (lilac + white + purple). Insert the knitted cord into one side of the cover and sew a leaf on each corner. For the remaining parties we repeat the algorithm.
Required materials and tools
Before making covers for stools, you need to clarify what yarn and tools will be needed during the work process. Usually, ready-made schemes contain detailed recommendations that will be useful for beginners. When choosing, it is important to take into account the characteristics of the threads and the frequency of use of the cover, then the product will be durable and practical.
The best yarns for making a cape are wool, acrylic and knitted yarn. Be sure to take into account the recommendations of specialists:
- There is no need to use threads with a high wool content, the only exception is insulating capes.
- The optimal thread width is 120–230 m per 100 g.
- Different colored yarns should have the same thickness.
Many needlewomen prefer Iris brand threads. The material is easy to clean from dirt and does not shrink after washing.
There are no special requirements for the tools, but it is better to use a hook of at least 3 mm. The thinnest part of the device should be 2 times thicker than the yarn. It is better to knit a cape in several threads, then the fabric will be stronger, more resistant to abrasion and deformation.
Woolen
Acrylic
Knitted
Hooks
Openwork covers
The covers have a diameter of 28cm.
To knit openwork covers we will need:
- yarn of any composition, preferably with the addition of synthetics;
- hook according to the thickness of the threads.
Description
We begin knitting covers by forming a loop. To do this, wind the yarn around your finger, forming a ring. We knit 3 air into it. lifting loops and 31 StS1N. We complete the row of connections. stlb, tighten the end of the thread. Next, we continue crocheting according to the pattern up to 15 rubles.
Separately, we make a cord from VP and insert it into the 14th row of the seat, then tighten it.
Starting to crochet a seat
Cast on ten gentle loops. We do not tighten the first twist in order to close the ring of the connecting loop into it. Next, we collect three handmade ears, which will serve as the first column.
They add twenty-three more columns in the middle, resulting in twenty-four. We reach the end of the row, and join the third loop with an end ring.
Popcorn covers
We will need:
- yarn, 100% acrylic, thick, color - according to your wishes;
- hook according to the thickness of the yarn.
Description
We will knit according to the pattern, alternating colors of our choice. We start by setting a chain of 8 chains.
We close it in the SSt ring and then knit:
- 1st row: 3 single lifts, 4 dc in the ring.
To form the 1st cone, we take the circle out of the working stitch and first insert it into the 3rd stitch of the lift, then return to the working stitch. loop. We stretch it through the 1st. We have a cone made of columns.
This pattern is called "popcorn".
Then *4 chain stitches, from ring 5 DC, insert a crochet into the top of the 1st stitch, then into a working stitch, pull it through the top of the 1st stitch*. Repeat from * to * twice more. We finish row 4 in/p, sl st to the top of the 1st cone.
For the 2nd r. We do 3 high-rise lifts. In this row, from each arch we knit 2 cones, between which there are 4 v/p, on the sides of the square we knit 3 v/p. The first bump consists of lifting loops and 4 dc, all other bumps are made of 5 dc.
At 3 p.m. from the corner arches we knit 2 cones, between which there are 4 v/p. On the sides of the square there are 3 v/p, cones from the arch, 3 v/p. We complete the row of SST at the top of the 1st cone.
We continue to work on this principle. From the corner arches we knit 2 cones, between them - 4 v/p. On the sides we make one bump from each arch after 3 points.
Having finished making the seat to the desired size, we knit two rows of cones without any increases at the corners; in the last row, knit the cones through 2 stitches. We get a narrowing of the cover, which will allow you to fix it on the stool after stretching it.
Next row
We re-cast a column of three ears, the next loop under two buttonholes, and knit two columns. The next column is one, again a knot under two loops. And so on we alternate, one column with two, in a circle until the end of the row. Then they connect into the third eye.
Now five twists are knitted, two columns are passed into one knot. And where the first column is, they attach it with a docking unit. Again they gain five ears. And they skip where there were two columns, pull a connecting loop into the first and third vertices.
Five delicate ears are knitted again. Pass two columns into the first crown and where there was one column, two buttonholes are added.
And in this way they knit to the end of the row and connect with the twist from where they started.
Knitted children's sleeveless vests, crochet boots "Popcorn": ideas, photos
Every mother, if she knows how to knit, wants to create beautiful things for her baby or toddler with her own hands. You can make a real autumn masterpiece for your little one in a couple of evenings.
Here are ideas and photos of knitted children's sleeveless vests and crocheted popcorn boots:
Knitted children's sleeveless vests, boots in knitted "Popcorn" crochet
Knitted children's boots in knitted "Popcorn" crochet
Knitted children's boots in "Popcorn" knit
Knitted children's sleeveless vest in "Popcorn" crochet
Knitted boots “Popcorn” crochet
Knitted boots “Popcorn”
This article contains a description of the Popcorn and many ideas. Choose what you like and create masterpieces with your own hands. Delight your loved ones with unusual and original things.
