Collecting scale models has become a favorite hobby
many people.
One of the directions is small copies of various cars. These can be cars, trucks, or special-purpose vehicles.
When a collection becomes large, the need to house it arises. A DIY typewriter shelf will help with this.
You can purchase a ready-made product in the store. But it’s not always possible to buy a shelf that fits the size. And realizing your fantasies, making something exclusive is much more interesting.
In addition, you can make sure that the shelf fits harmoniously into the interior of the room. The most accessible materials for its manufacture will be:
- Wood (natural or chipboard);
- Plastic;
- Metal;
- Glass;
- A combination of the listed materials.
Working with them does not require any special knowledge or skills.
The tool you will need is the simplest one. The shelf can be floor-mounted or wall-mounted.
DIY garage for cars
An option for parents who are not afraid to invent and build something with their own hands. To build such a garage you will need a wooden box and pipes. You can use thick cardboard or toilet paper rolls as tubes.
It is important to sand the box well so that the child does not get hurt.
The pipes must be carefully laid out and glued together.
It's better to use a hot glue gun, but you can try regular glue. If desired, the box can be painted and a sign hung.
Wood shelf
When choosing this material for making a shelf, you need to decide what it will be. Both wood and chipboard have their advantages and disadvantages.
The board is easier to work with; good types of wood do not absorb moisture. Particleboards, as a rule, have a high-quality factory coating. Accordingly, you don’t have to paint them.
In addition, when working with chipboard, in furniture stores you can find various accessories for sealing corners and edges in the desired color.
In both cases, individual structural elements can be connected using ordinary self-tapping screws.
A stronger connection will be achieved if you use so-called “confirmants”. These are special screws that are used in furniture production.
Metal magnetic holders
This option is suitable for you if the cars are metal and there is not enough space in the room to put a box for storing toys.
The magnetic holder is designed for storing kitchen knives and tools , but for us the main thing is the magnetic side.
We attach them to the wall and voila! The cars are not lying on the floor, but are neatly hung on the wall. This holder can be found on Aliexpress (Here).
Glass shelf
It looks very impressive made of glass. To do this, it is better to order it from a glass-cutting workshop. Here they will be made to the required dimensions and the edges will be polished.
This must be done to avoid cuts. Cutting glass shelves to size yourself is not difficult, but it is better to entrust the processing of sharp corners to professionals.
You can make the entire structure entirely from glass using special silicone glue. This glue is designed for gluing aquariums.
You need to work with it using respiratory and eye protection, because... it releases substances harmful to the body.
Dry the glued surfaces in a well-ventilated area for at least 24 hours. Canopies for wall mounting are also glued with this silicone adhesive.
You should take into account the weight of the structure, because glass itself is not light. In addition, car models are most often made of metal, and they also have some weight.
One of the problems with collections placed on shelves is dust. Models have many small details and when dust gets on them, their outlines are smoothed out.
In addition, the color of the object is lost. Therefore, a hermetically sealed shelf for DIY typewriters will be more practical.
To do this, when designing it, it is necessary to provide for the presence of front glass doors. They can be movable.
Master class on the topic:
To do this, guides are made at the bottom and top. You can use special furniture mounts for glass, which are sold in hardware stores. Installing them won't be difficult either.
Suitcase for cars
If your child’s collection includes at least 100 cars, then such a suitcase will be a real find for you. All the cars will be neatly folded, and the suitcase can be stored in the closet or under the bed. This suitcase costs about $20 on Amazon.
You can also find a spacious suitcase for cars on Aliexpress. You can order one here.
Metal rack
A shelf made of this material will bring an element of something extraordinary and unusual to the interior of the room. Since it will weigh significantly, it is better to make it floor-mounted.
Working with metal is more difficult than working with wood or plastic. But made of aluminum or nickel-plated steel, such shelves will look beautiful for many years.
The benefits will be:
- Reliability;
- Durability;
- Exquisite style;
- Practicality;
- Originality;
- Combined shelves for models.
The design consists of the shelf itself and the jumpers between them. Therefore, different materials can be used.
Make a shelf, for example, from glass, and the side walls from wood or plastic. Or vice versa. You can experiment with angles.
Fastening
For wood and chipboard, ordinary furniture hinges are used. They are screwed with screws or self-tapping screws to the side at the top, the shelf is hung on dowels.
You can make a hidden fastening that will not be visible. To do this, at the end, in the upper part of the side wall, a drill is made to a small depth, 15-20 mm. It is hung on this hole.
Another video:
To install glass shelves, special fastenings consisting of two parts are used. Such fasteners can be purchased at building materials stores.
A shelf for cars for my son or porridge from an axe. — DIY community on DRIVE2
I wish you all good health. I’m growing up a bully who really doesn’t like to clean up his toys, especially the construction toys on the floor and small cars bring me great happiness, in short, I decided to make some kind of shelf for the cars so that my son would keep order and it would be interesting for him)) . I will say right away that I did everything from what was and what was. And it was: 1.Rack 20 by 45. 2. Carpenter's glue. 3. Milling cutter. 4.Drill. 5.Jigsaw. 6.Miter saw. In general, nothing else was needed. I looked at photos of shelves on the Internet and chose the option of a shelf in the form of a tractor, with a semi-trailer. The semi-trailer, as you guessed, has a shelf. Let me get to the point briefly:
Full size
On the found board we mark the outlines of the truck and cut it out with a jigsaw.
Since I didn’t have enough boards to make the wheels right away, I had to tinker with them. Once upon a time we cut holes in an oak board with a crown, there were blanks left for the wheels, they were useful to me, they were not even, they were of different diameters.
Full size
To make everything even, I made the following design: I put the future wheels on the bolt, tightened it with a nut, and inserted it into the drill. I leveled it first with a chisel, then with sandpaper. Looks like I drew it on the photo, it looks bad, but it should click.
I cut out the car and the wheels are ready.
Full size
To keep everything civil, I went around everything with a radius cutter with a bearing. You can see her in the photo.
We put the tractor aside and proceed to the trailer. I sawed 4 slats at 45 degrees on the trim. The next task was to glue them together; there are no corner clamps, but I saw on the Internet that they used an elastic band. There was no rubber band either, there was a camera. I cut out a suitable strip.
Full size
When screeding, the planks were positioned at the corners, resulting in exactly 90 degrees. Now about the grooves into which the middle shelf is inserted, highlighted in circles
I thought it would be easier to cut them out, in short, I quickly assembled the carriage on my knees.
Full size
Here's the carriage. We select a cutter of the required size, set the milling depth, place the router in the carriage and go through it. If anyone can tell me how to make the grooves simpler, I would be very grateful.
Well, the best part is, we put everything together. Initially, I set myself the task of doing everything without a single screw, just glue.
Full size
I assembled everything using homemade dowels and glue.
I'll tell you how I make them. They cost pennies, I agree, but sometimes they are needed, but they are not at hand, but there are a lot of scraps that cannot be used anywhere.
Full size
Here's the device. We insert the piece of wood into the drill, then pass it through a hole in the metal, the diameter of the hole is slightly larger than the diameter of the required dowel.
Full size
The sandpaper and our type of dowel are ready.
Full size
Almost done. He indicated where he glued his dowels.
Well, all that remains is to paint it. I entrusted this matter to my wife, because it was not given to me. We used acrylic paints, firstly, they seem to be more environmentally friendly), and secondly, my wife has a lot of them in different colors))). Well, I also liked that it seemed to be painted and the wood texture was visible. Well, the finished product:
Full size
My son is happy. The paint has dried, I have a day off today. My son is in kindergarten, which means the shelf will take its place on the wall very soon, and I hope in the evening my son will carefully arrange his car park there)))
Thank you all for your attention, maybe it will be useful for someone, because buying everything now costs a pretty penny. I made it from scraps and with the cheapest tools, I think if you initially prepare the right material, all sorts of ribbons, lights, light bulbs, then you can create something more interesting, in general there is an idea in your head, but that’s a completely different story))).
Creative shelves for storing cars
Homemade shelf for cars
Purchasing a shelf for cars is a way out of the situation when the toy car fleet has grown so much that it takes up almost all the free space. Additionally, cars scattered around the house can cause serious injury, which is why it is important to have a good storage system for them. This review contains several ideas that will inspire parents and collectors!
Vintage typewriter rack spotted on 4 EGT blog. It will become not only a practical storage unit, but also a beautiful showcase for displaying your collection.
This cozy “garage” is easy to sew yourself using instructions from the Homemade by Jill website. Its main advantage is portability.
The environmentally friendly truck, produced by the Czech brand Fler.cz, is a toy in itself and also serves as storage for other cars. With the latest design upgrade, it now has real wheels.
This DIY wooden car rack from What About Wood holds 35 to 40 toy cars.
This Little Miss Alizzi shelving unit once served as a cassette shelf. Now it's great storage for cars with a chalkboard instead of a back wall.
Do you have your own unusual ways to store toy cars? Share with us in the comments!
Shelf for cars in the form of a truck vector layout free download
Good morning everyone! Today I want to offer you a great vector layout! If you are planning to make a shelf for cars in the form of a truck, this vector sketch is what you need. This toy car shelf will help your child beautifully display their entire toy collection.
This difficult-to-manufacture piece of furniture is made from plywood of various thicknesses. Consists of three separate shelves for 100 machines each. You can make one or more individual sections, depending on the number of machines you have.
Layout characteristics:
- Dimensions of one shelf - sections for 100 machines - 1000x400x50 mm.
- The dimensions of one section are 100x35x50 mm.
- Material: MDF or plywood thickness 3, 6, 9, 18 mm.
- total cutting length is 116 linear meters.
archived files in cdr x4, eps, dxf formats
↓ Download free model of a shelf for cars in the form of a truck in one archive ↓
(.zip file, 3.98 MB)
