Furniture invoice lock: how to choose and install it yourself

The closet lock must perform a locking function and serve reliably for many years. Installation of the mechanism is quite simple and does not require special skills.

Today everyone can afford a wardrobe. It is compact, roomy and convenient. Regardless of whether you purchase a finished product, make it to order, or make it yourself, you should decide in advance whether you will need a lock for the sliding wardrobe. Most often, families with small children or owners of office premises think about locks.

Finishing touch

The service life of a lock depends, first of all, on its quality: the better it is assembled, the stronger the material, the longer the lock will last.
Good locks, in addition, should not change their color or fade, that is, they should have a high-quality coating. Also, when purchasing a lock, you should pay attention to how smoothly the mechanism works, and most importantly, the key from one lock should not fit another. Manufacturers of quality locks have thousands of different combinations to avoid this situation.

You can familiarize yourself with all of the above lock models in more detail in the electronic catalog or at the MDM office, where professional managers will show you each model in action and choose the best option for you.

Come and choose “Locks worthy of your furniture”!

What to choose from

The locks used in a wooden and iron door are practically the same, but installing a lock in a metal door is considered a more difficult task, especially if it is a safe-type structure, so it is easier and cheaper to change only the cylinder.

But before you replace the cylinder in the door lock, you need to figure out what kind of mechanism is installed there. There are 3 types of such structures:

1. Disk;
2. Cross-shaped;
3. Cylinder.

The disk cylinder of the front door lock has a round keyhole and is unlocked with a semicircular key with notches. At the end of the last century it was considered reliable, but then people figured it out and now disk larvae are not popular.

In fact, their only advantages are their affordable price and easy replacement of the door lock cylinder.

Replacing the door lock disc cylinder is not difficult, but it is not reliable.

The next contender is the cross larva. The situation here is approximately the same. Despite the fact that a key with 4 edges seems reliable at first glance, in reality the cylinder’s structure is more than simple.

To open the cross mechanism without a key, thieves don’t even need to drill it out; they simply remove or slide the decorative trim and turn the mechanism with a powerful screwdriver or some similar device. So if you have such a mechanism, it is better to change the lock.

Cross mechanisms are considered the least reliable.

Cylinder mechanism. Changing the cylinder in the lock is also not particularly difficult here, but over more than 100 years of development, the reliability of cylindrical heads has become several orders of magnitude higher than that of the two previous options. Plus, such mechanisms have several modifications.

Classic scheme of the English mechanism.

There is no particular point in dwelling in detail on the cross and disk mechanisms; experts do not recommend using them, but if such a mechanism is already installed, then you can watch how to change or how to drill out the cylinder in the locks on the video in this article and read “here”.

https://www.youtube.com/watch?v=eP0AWXudW3Y

By the way, if you have a so-called lever lock with a butterfly key installed, then there is no cylinder at all, this is a completely different type of design, here you will have to change the entire lock. True, there are level models with reconstruction for a different key, but their price is high.

This is what a lever lock with a butterfly key looks like.

Varieties

There is hardly any need to talk about what rim locks, like other types of furniture locks, are used for. Everything is already very clear.

Locking mechanisms or locking furniture fittings are divided into several categories depending on certain design features, materials used, mechanisms, etc.

For some, a classic old-style round lock like Pinocchio is perfect, while others will need a modern block, supplemented with electronics.

Let's look at what furniture locks can be.

According to the material of manufacture. In most cases, steel, aluminum or an alloy of different types of metal is used. But you can even install a plastic lock, although then its reliability and practicality will be much lower

If it is important for you to get a high-quality and durable lock with a cabinet key or to prevent children from getting into places where they shouldn’t, choose metal fittings; Installation location. When choosing a furniture lock of the overhead type, be sure to consider where exactly the installation will be carried out. For example, the central one for a bedside table made of chipboard, MDF or wood will have a greater thickness

But for lining glass doors, more compact and thin models are needed; Mechanism. According to the mechanism, all furniture locks, including overhead locks, are divided into retractable, rotary, rack and push-button; Locking mechanism. Previously, only mechanical fittings were offered. Now they are being replaced by electronic, coded and magnetic solutions; Dimensions. Here it is worth starting purely from the furniture on which the device will be mounted.

For example, the central one for a bedside table made of chipboard, MDF or wood will be thicker. But for lining glass doors, more compact and thin models are needed; Mechanism. According to the mechanism, all furniture locks, including overhead locks, are divided into retractable, rotary, rack and push-button; Locking mechanism. Previously, only mechanical fittings were offered. Now they are being replaced by electronic, coded and magnetic solutions; Dimensions. Here it is worth starting purely from the furniture on which the device will be mounted.

Overlay elements fit perfectly into a drawer and are suitable for hinged doors and sashes.

The main thing is to know why exactly you need a lock. And then there will be no problems with selecting a suitable model.

Varieties and classification

When choosing a furniture lock, you should clearly understand what material it will be attached to. Indeed, today there are a huge number of varieties of locking mechanisms.

All furniture locks can be divided into three main types - those mounted directly on the furniture; half recessed and fully built-in. The design of the locking mechanism itself directly depends on the material of the furniture on which it will be installed. Thus, there is a furniture lock for metal, wooden or glass doors. Depending on the scope of operation, there are harpoon-shaped, rotary, push-button and rack-and-pinion mechanisms.

Installation of locks on furniture in Moscow and Moscow Region

Installing a furniture lock on drawers, cabinets, bedside tables, chests of drawers and other pieces of furniture allows you to ensure the safety of documents and other valuables. Depending on the type of furniture and other factors, locking devices of this kind can be overhead or mortise. Nowadays, in the furniture world there are not only mechanical locks, but also electronic or magnetic ones - with different levels of secrecy and burglary resistance.

If you don’t know how to install a furniture lock with your own hands or you don’t have time for it, calling an emergency LOCKSERVICE technician will be the best solution. Our advantages:

• 24-hour emergency service, 7 days a week, with the possibility of a technician arriving at any time convenient for the client. Thanks to the rational distribution of LOCKSERVICE employees, the installation of a furniture lock on a drawer can begin within 15 minutes after the call, in any district of Moscow and the Moscow region;
• An optimal system of logistics and interaction with the client - having received the necessary information about the upcoming work in advance, the master goes to the site with a set of the necessary fittings and specialized tools;
• An extensive range of various mechanisms and other elements of furniture fittings in the arsenal of our employees allows us to quickly solve problems of any profile - installing a locking device on a desk drawer or installing a lock on glass display cases in a store;
• If necessary, we also install control and multi-level access systems. Including monitoring, electronic recording of the history of opening/closing and other options.

To understand how to install a lock on a cabinet door or other piece of furniture, you need to understand the types of locking products and choose the most suitable one. The following types of furniture mechanisms are usually used:

• Mechanical (opened with a key);
• Electronic (opens by entering a code);
• Magnetic (a special key is used to open, closed using a magnetic field).

The most common are mortise furniture mechanisms, often used for wooden cabinets and cabinets. The second most common are overhead devices that are installed on glass doors.

When you need to insert a lock into a cabinet, searching for the right model of furniture lock in specialized stores can take a lot of time, as can the installation procedure itself. Incorrect installation of a lock on a wardrobe or other furniture is fraught with negative consequences that impede the normal operation of the locking device. Distortions may occur, the key will turn with difficulty, the mechanism will jam and quickly break.

Even the simplest installation of a furniture lock in a drawer requires certain skills and suitable tools. Using the services of a specialist is much more convenient than tinkering with the problem yourself. When choosing a contractor, you need to take into account that not every specialist who can be found on the Internet has the necessary competence to install a product with an advanced protection system.

Often, the lack of qualifications of the master is revealed by too low prices, as well as the universal nature of the specialization - offering a wide range, he has only superficial knowledge in each area. Being mainly involved in mechanical locking devices, he may not know how to install a furniture lock for a bedside table of a combination or magnetic type.

To avoid negative consequences when independently deciding how to insert a lock into a cabinet or door, and to save your own time, it is best to entrust this kind of work to an experienced LOCKSERVICE master, who will install furniture mechanisms of any type quickly, efficiently and with a guarantee of up to 3 years years.

Call us by phone number or leave a request on our website right now. We will help you fit a lock into a closet, bedside table or door at any time convenient for you.

Purpose

You can find a wide range of door closers in Ikea, Leroy Merlin, or look through the catalogs of such hardware manufacturers as Blum, GTV or Boyard. In cities like Moscow or St. Petersburg this is not a problem. And the conventional Tyumen is not much inferior to them.

Closers for sliding wardrobes are special mechanisms designed for self-closing doors, which are subsequently fixed in a stationary state. Here I would like to note that stoppers do not always cope with the assigned tasks. Closers are mounted on doors, protecting them from damage in the event of accidental or deliberate sharp slamming. Many companies, including Aristo, offer similar products.

At the same time, door closers are almost never included in the basic package of a coupe. That is, these elements have to be purchased and installed separately.

I can’t say that this fittings are incredibly expensive, but the price depends on many factors.

A characteristic feature of the devices, as well as their advantage, is the ability to install them at any time and as needed, when the cabinet is already assembled.

In most cases, they are universal, that is, the mount fits different models and configurations of the coupe itself. If you have a frame with an aluminum profile, almost every door closer you choose will probably suit your cabinet specifically. As you can imagine, the key feature is soft closing. Plus, the device protects the doors and side pillars of the coupe from mechanical damage. This will be an especially useful addition for those whose facades have glass or mirrors.

If you slam the door hard without calculating the subsequent impact, the glass and mirror can easily break.

Required tools for installation

To secure the lock structure, it is not necessary to call a specialist. It is enough to determine the tools for independent operation.

A marker is required for all operations; chisel; drill with a diameter of 2.3 cm. (feather type); a simple pencil; screwdriver; screws, lock and handles included in the kit; stationery knife; construction tape; electric drill; wood cutter with a diameter of 5 cm. If you don’t have a marker, you can replace it with a simple pencil.

Basic and additional tools for manual installation

An additional, but no less important tool is a drill. For manual installation it is required. You can buy it in departments with door fittings (furniture, hypermarket, construction market). It’s better to take not just one, but a set of wood drills.

The drill bits must be wider than the locking device, so having a set you can select the required size. You will also need a hammer drill to level and enlarge the opening. A jigsaw is suitable for processing hard-to-reach parts.

Markers are good at making markings on canvases, but they are absorbed and difficult to remove if you miss. The pencil will leave less marks, but a little will be visible on the surface. Use a pencil of medium hardness so that something too soft does not smear, and a hard one does not leave irreparable marks.

It is necessary to accurately take measurements and marks, not only so as not to leave unnecessary marks, but also to cut out all the parts evenly. If not cut correctly, the structure will jam or the locking mechanism will not be able to be inserted into the grooves.

For accurate measurements you need a tape measure, a building level and a caliper. A caliper allows you to measure the required position of decorative strips, grooves, and canopies.

A convenient length of a tape measure or metal ruler is 3m-5m. The metal ruler will not be damaged if it accidentally collides with other tools, so it will last longer.

A level is needed to install doors evenly and identify distortions that will affect long-term operation. For sawing trims and bars, it is better to use a miter saw. It does not split the edge like a jigsaw or hacksaw. A screwdriver may be needed to install handles, locks and awnings (to tighten hardware). After preparing all the tools, you can begin installation.

Selecting a router for self-assembly

Installing a lock on an interior door using a router is simpler and easier than using a drill. It speeds up the work, because you quickly get a neat hole. The milling cutter can be vertical (submersible), which can arbitrarily set the depth of the grooves. The device is very powerful and heavy.

Therefore, for working at home, it is better to use a special router, which has less weight and power. During installation, the tool for inserting locks should be convenient, then the work will come out neat. If the specialized framer is good, then the operation button allows you to control the degree of rotation, adding smoothness.

When selecting a device, the length of the cord, weight, location of control elements and functions are important. Before purchasing, be sure to turn on the machine and look at the movement of the head (it must be free). If there are distortions or play, the device will not be suitable for work.

For comfortable work, adjusting the rotation speed is important. A switch with a discrete rotation principle is good. The presence of protection on the switch will protect the device from dust, sawdust and mechanical damage. The cutter overhang indicator is also important. If it is larger, it will be difficult to drill the hole to the required mark.

Among the additional functions, the width of the surface view, minimal noise, backlight, various attachments, etc. are important.

Do you know how to work with a router?

Not really

Option No. 2. Install a capital mechanism

In general, this procedure is not much different from the one described above. However, take into account the following factors:

• such structures, as a rule, are larger, so you need to select the correct dimensions, preparing the cavity from the end;
• you should work slowly and carefully, because if too large a niche is formed, then backlashes will inevitably appear, which over time will loosen the shutter;
• such mechanisms often have additional guides - steel pins that are inserted into specially designated grooves, so you will need to drill additional holes for them;
• It will take more time and effort when processing the end of the blade, since such structures are often equipped with round metal plates (you will need to carefully cut the hole to the shape and size).

Taking into account these nuances, you can insert the lock into the interior door with your own hands and securely fasten it without unnecessary hassle. Below you will find photos and videos that will help you thoroughly study the installation process.

Please note that the array must be hung on hinges. In other words, all work is carried out after the finishing of the premises. It is not recommended to drill and cut holes in a horizontal position. This way you can damage the surface of the coating (especially if it is parquet or laminate), and you will also have to constantly lift and turn the canvas, as well as hold it suspended, which is very inconvenient.

Choosing a pen?

For the sliding system, you can choose a handle that will have the most suitable design. All existing varieties differ from each other in individual details, and therefore which option ultimately turns out to be acceptable will depend on:

• Design features of the door;
• Doorway size;
• Dimensions of the door leaf;
• Sash material;
• Personal preference.

All handles are mortise, and their handle is most often an ordinary recess used to open the sash.

Independent models

These handles got their name because they are not connected to any locking mechanism. Their design does not imply the installation of any kind of lock or elementary latch. If it is necessary to fix the sash in the closed position, to the leaf and side wall. The force generated must be sufficient to prevent the closed sash from moving.

The popularity of independent handles is due to their:

• Fairly simple design;
• Low cost;
• Easy to install.

Most often these are mortise products placed inside the sash during installation. The handle does not extend beyond the door leaf, which makes it possible to open/close the door even with limited surrounding space. This model is suitable for cassette sliding systems, which can be completely hidden in the wall during the opening process. The installed handle in this case greatly facilitates the process of operating the door system.

Mortise with latch

This handle is initially equipped with a locking mechanism that allows you to open and close the latch when the need arises. In terms of their design, such handles are similar to models installed on swing doors, but they have some differences.

Firstly, the handle is made much smaller. Secondly, the latch comes out of the hole in the strike plate after turning a small handle or moving the slider. Both options assume that the parts used to open the door are located in a special recess on the door handle. As a result, the installation of such a handle is possible on doors that are used in limited conditions, for example, on cassette doors.

Handle with lock

This model differs from previous versions by the presence of a special hole designed to accommodate a keyhole. Manufacturers offer models that already have a cylinder of a locking design built into the handle, adapted to the operating features of the sliding door.

Related article: How to adjust the door closer

Design features

In most cases, the closer is a universal mechanism that has a standard design.

Such devices have several basic structural elements.

If you see a door closer, it will probably consist of:

• housings;
• pusher piston;
• springs;
• stopper for the upper guides;
• decorative elements;
• fastenings for installation;
• factory packaging;
• instructions;
• manufacturer's markings.

In some cases, it becomes possible to independently regulate the speed at which the door will close.

To regulate the speed, a special valve is installed on the end side of the body. To change the parameters, you simply need to turn it using a regular hex key.

If we talk about the sizes and shapes of the products, these are mainly universal designs that can be used on most facades made on the basis of aluminum profiles. This does not have to be a door closer from the same manufacturer as the standard fittings on your coupe. For example, having bought Aristo sliding doors, you can buy door closers from other brands, such as Blum, Boyard or something more budget-friendly.

Installing the main types of locks on furniture with your own hands

The process of installing a furniture lock yourself is not complicated. Most often, the product kit includes all the necessary components, including fastening elements for the lock, and complete instructions for installation.

The lock for wardrobes and furniture with a folding or folding opening system is installed in the same way as locks designed for swing doors. Therefore, we will consider the processes of installing locks only on swing doors.

Installation of a furniture mortise lock

Before starting installation you need to prepare:

• tools for marking (ruler or tape measure, pencil);
• drill;
• a screwdriver or screwdriver of a suitable size.

The lock is installed according to the following scheme:

1. Carefully and accurately markings are made to install two lock blocks (the locking mechanism and the block for inserting the latch);

The process begins with marking

It is recommended to install the locking device at a distance of 2/3 from the floor.

1. using a drill, holes are drilled for attaching the lock and inserting the locking mechanism;

We begin drilling by selecting a suitable drill bit.

1. The main lock block is attached to the door leaf, and an additional one is attached to the furniture body. For this, self-tapping screws and a screwdriver are used;
2. the functionality of the structure is checked. To do this, the wardrobe with a lock opens and closes several times. If necessary, the lock is adjusted.

Installation of a furniture lock

To install a rim lock, you need to follow these steps:

1. apply the markings on the cabinet door necessary for installing the main block of the locking device;
2. drill holes for fastening the mechanism;
3. secure the main part of the lock with the fasteners included in the kit;
4. using a marker, mark the latch on the furniture body;
5. make holes for attaching the strike plate;
6. install the striker according to the prepared markings;
7. adjust the operation of the lock.

If the rim lock is attached using magnetic elements, then the installation process comes down directly to attaching the mechanism in the right place on the door and cabinet body. There is no need to drill holes for fastenings.

Furniture locks are mainly used in shops, factories, gyms and so on, that is, in places where storage of clothing, documents and personal belongings is required. At home, cabinet locks can be installed to protect children from harmful substances. You need to choose a castle based strictly on the rules developed by experts. The process of installing the device yourself does not cause any difficulties.

How to install it yourself

Installing a furniture lock will be quite feasible for most users. The greatest difficulty is the installation of a mortise structure. Procedure:

1. The necessary tools are being prepared. You will need an electric drill, a Forstner drill or a pen drill (the first is better), a ruler, an awl, and a screwdriver.
2. Marking is being done. Usually a diagram is attached to the lock, which is placed on the door and the centers of all holes are marked. If there is no diagram, you need to accurately determine the dimensions and mark the drilling points on the sash. They are marked with an awl to leave indentations for centering the tool.
3. The necessary holes are made. As a rule, you need a through one for the mechanism and several blind ones for fasteners, although there may be other options.
4. The lock is fixed, a decorative ring is put on the cylinder.
5. Next, focusing on the position of the part, the installation location of the counter structure is noted. It is attached to a fixed part of a cabinet or table.

Advantages of larch furniture board, its varieties

The last step will be to check the functionality of the product and adjust the response bracket, if necessary. As a rule, you need to slightly bend the corner to achieve the desired result. After this, the installation is considered complete, and normal operation of the lock begins.

Tools are being prepared

Marking is being done

Holes are drilled

The lock is fixed

A counter structure is being installed

High tech locks

To ensure high reliability, hardware manufacturers today offer high-tech locks that differ in operating principles from previous options. To understand the classification and purpose of such locks, it is recommended to look at the proposed table with characteristics.

Electronic

Electromechanical

Electromagnetic

Reliability rating

Each lock has a certain degree of resistance to burglary. According to this indicator, the reliability of the device is determined. Based on this information, a rating has been compiled showing the gradation from the most reliable locks to the options that are prone to burglary:

1. Electronic furniture lock - this type has a high cost, so the reliability of such a product is considered the highest. It’s not for nothing that electronic options are installed on lockers in the locker room, where a person’s personal items are in potential danger. A code is pre-recorded in the reading device, the key to which exists in a single copy;
2. Coded analogue - such a lock is also considered reliable, but no more than the electronic version. Its disadvantage is that you can forget the code number combination. It will take a lot of time to hack such a device;
3. Level mortise lock - due to the cleverly designed mechanism of operation, this option will ensure the safety of storing things inside the furniture;
4. Rotary and retractable type options - due to the use of a key to unlock the lock, these products are considered reliable, but they cannot be called devices that ensure complete safety and security;
5. Magnetic locks are less reliable devices, the operating principle of which is to use a magnetic base;
6. Latch locks - such options are considered outdated, as they are not particularly reliable. They are less often used on furniture products, giving preference to innovation.

From the information provided, we can conclude that furniture locks based on power supply are considered the most reliable. It is impossible to find a code for such devices, so they provide increased safety and security of things in furniture.

Suvaldny

Turning

Magnetic

Espagnolette

Smart choice is the key to success

To make it easier to decide on the type of furniture protection from children, use several simple but effective life hacks.

Cabinet Contents

To restrict children's access to things like clothes, toys, and bedding, mechanical (mounted, external or internal) locks are sufficient. They are inexpensive, easy to install and relatively durable (especially those that are attached to handles).

Expert opinion Daniil Dmitrievich Korzhavin Designer of stylish home furniture

According to consumer reviews, most children by the age of one and a half years understand mechanical locks with external and internal fastening in no time. But it no longer makes sense to hide most things once the child reaches this age.

If we are talking about a first aid kit or household chemicals, it is better to use magnetic locks. Well, a smart lock will serve to store personal documents, jewelry and savings.

Features of furniture design

Be sure to consider the design of your furniture. It's not just about opening systems. For example, what about semicircular facades if you want to install a hidden mechanism? Not all locks will be able to cope with the task due to poor fit to the concave surface. The same applies to ribbed and textured facades. Perhaps the best option for such furniture would be padlocks.

Not everything is clear with retractable systems

Pay attention to the height of the walls of the box itself, and not just the facade. Drawers with high sides take up all the space in the cabinet body, so there is simply not enough space to install a hidden security device

Manufacturer and materials

Models of blockers that look identical may turn out to be of different quality, so check:

• plastic latches. Should not be flimsy or too tight;
• adhesive base. One of the common complaints about externally mounted security systems is that they are weak. This is due to poor quality double-sided tape. This is how the manufacturer saves on the product, and the buyer receives a structure that cannot even withstand its own weight;
• safety of the material and shape of the structure. Children often taste everything; during the teething period, babies get into their mouths absolutely everything that can and cannot be imagined. Therefore, the materials of the lock must be environmentally friendly, and its shape must have no sharp edges, easily separated parts, etc.

Child safety locks are a convenient invention that will make your child’s stay in the house truly safe. And with the right choice, they will last a really long time and conscientiously.

Closer for sliding system

This is a whole system that includes stoppers, limiters, latches and other elements so that the doors automatically close smoothly and are comfortable to use. Every third model requires several closers at the same time due to the need to close the doors in different directions. Adapters that regulate the operation of the system are installed in the upper part of the cabinet, and the closer is installed in the upper part of the guide yard.

It is worth noting another significant role that is controlled by the automatic system - security. This device minimizes the likelihood of injury when closing the cabinet abruptly.

In addition to providing safety to the owners, the structure itself has an increased level of protection against loosening. This opportunity arises due to the shock-absorbing effect that is introduced into the automatic door closer systems.

To select an automatic closer system, you should pay attention to the following factors:

• dimensions and weight of the wardrobe;
• directions for closing and opening the sliding system;
• material of manufacture of the system itself (aluminum structure or steel).

The installed systems are in demand and extremely popular due to the fact that they combine:

1. Ease of use. You just need to push the door and it will smoothly close on its own. Children or pets will not be able to do this. The effort that needs to be made is not noticeable for an adult, but for children even an animal will cause difficulties.
2. Aesthetic appearance. The door is always in the right position and closed for a fee.
3. Safe to use. When closing the doors, neither children nor pets will be harmed. Often when playing, children can sharply push the door, and the system slows it down 5-7 centimeters from the wall itself and slowly closes it, preventing injury and damaging the cabinet body.
4. Reliability. Steel and aluminum structures allow the mechanism to be used for a long time.

How to age furniture pieces with your own hands: various effects and materials

You can learn how to install a stopper with a shock absorber on a sliding wardrobe from the video.