CRTs have become flat, and now there is no need to allocate a niche in the wall or a place on the bedside table for the TV. The screen size has increased, so you need to calculate at what height to hang the TV on the wall for comfortable viewing of programs. Calculations begin even before purchasing plasma. You should consider the purpose and size of the room where the infotainment equipment will be located, the type of monitor and its resolution.
TV in the hall
How to attach a hanging TV stand
Hanging TV stands visually expand the space, effectively complement the flat screen of a modern TV, and look easy and stylish in the interior.
They are great for both spacious and small rooms. The only disadvantage of such furniture is the complexity of its installation. If the fastening is unreliable, the TV stand may collapse along with its contents. Therefore, the issue of attaching a hanging TV stand must be approached responsibly. After all, choosing a beautiful and reliable model is half the battle. In order for the purchased furniture to reveal its maximum potential and become a luxurious addition to the living room, it must be expertly secured - in the right place, evenly, neatly and securely. This task can be entrusted to professionals or solved independently.
What to consider when choosing
It is useful to know how to choose the right location for the cabinet in the room. Naturally, the main condition is considered to be a load-bearing wall, but there are a number of other nuances.
- The TV should be located away from solar radiation and heating devices.
- The installation height of the cabinet is selected so that the upper third of the screen is at eye level of the person looking at it. Typically this value is in the range from 1 to 1.5 m.
- The distance from the television receiver to the seat is equal to the diagonal multiplied by 3 or 4.
- Designs with a rotating stand make it possible to change the viewing angle.
When choosing a cabinet, you should pay attention to the style, safety of the design, environmental friendliness of materials, quality of fittings and operation of the opening mechanisms.
The hanging TV stand looks stylish and modern. It copes with its functions perfectly: it serves as a stand for equipment and storage space.
Methods for attaching a hanging TV stand
When it comes to the question of how to attach a hanging TV stand, there are 2 main ways - using anchor bolts and special canopies.
The reliability of fastening furniture using anchor bolts largely depends on the strength of the wall. Therefore, both in terms of reliability and aesthetics, it is preferable to use canopies with hooks in combination with a mounting plate. Their design and appearance may vary, but the photo shows a common example. Each of these mounts can withstand a load of up to 120 kg or more, which allows you to fully use the cabinet for installing equipment and storing things in the internal compartments. After attaching the TV stand to the canopies, you can adjust the position of the furniture in height and depth within a range of 2 cm. Additionally, the kit includes a pair of plugs for masking the fasteners.
Although the canopy can withstand a significant load, it is unacceptable to limit yourself to 1 fastening in the center. You need to use at least 2 fasteners and install them along the edges of the furniture. In this case, the load is evenly distributed between the canopies, and the risk of the cabinet falling is reduced to zero. When installing a long cabinet, it is better to use 3 canopies - along the edges and in the center.
Equipment
To organize a storage system, the hanging TV stand is equipped with open and closed shelves and drawers. It is used to place documents, books, photo albums, etc. In addition to equipment, decorative items are often installed on the surface.
In addition, additional elements are provided:
- holes in the rear wall for wire exit;
- backlight;
- platform with rotation function.
Canopies for attaching wall-mounted furniture
Modern canopies for wall mounting of TV stands and other types of furniture are no longer simple ear-shaped structures, but functional mounting plates with adjustment in several directions.
The adjustable canopies include: The suspension is adjusted by 2 screws hidden in the adjustment block. With their help, you can eliminate the skew of the cabinet or pull it close to the wall. To install an adjustable canopy, holes are made in the furniture body, and the fastener is screwed to the walls using self-tapping screws. The fasteners can be installed on the side walls of the cabinet, on the back wall, or in a mortise manner into the end of the side wall. The load withstand depends on the design of the specific model. Hangers for heavy furniture have reinforced sheet metal hooks.
Clearly horizontal
When installing wall-hung TV stands and other types of wall-mounted furniture, difficulties often arise with maintaining a strictly horizontal level.
This is especially difficult to achieve when using traditional hinged hinges. But during the operation of furniture, failure to maintain the horizontal position leads to skewed doors and other problems. This is another reason to use adjustable awnings. In combination with the mounting strip, they ensure that the furniture is level and can withstand heavy loads. Additional advantages of adjustable awnings are:
Installation process of a hanging TV stand
Before attaching a hanging TV stand, you need to determine the location of its installation. If the screen will be installed on the stand itself, the installation height should ensure comfortable viewing of the TV from a sofa or armchairs. To do this, the screen must be at eye level. If the TV will be mounted on brackets to the wall, the bedside table can be installed lower. The main thing is that it is convenient to use and that it is in harmony with the rest of the furniture in the interior.
Let us describe the approximate sequence of installing a wall-hung TV stand using a mounting plate and adjustable awnings:
If the cabinet is installed on a solid wall with good load-bearing capacity, it is permissible to use fragments of a mounting rail about 15 cm long - fix them in the locations of the canopies. But if you have the slightest doubt about the strength of the walls, as well as when installing large, heavy furniture, it is better to use a solid mounting rail along the entire length of the cabinet and secure it with several fasteners. In this case, the cabinet will withstand any load.
Source
What to consider when choosing a TV stand
The process of installing wall-mounted TV stands is complicated by additional requirements. It’s not enough to just choose a load-bearing wall. You will have to adapt to the features of the TV. Here are the mandatory requirements:
- No windows. Moreover, they should not be not only on the wall where you place the TV, but also opposite it. Direct or oblique sunlight will significantly spoil your viewing process. Light-exposed spots will appear on the screen, and the color will be noticeably distorted. This rule does not apply only to the latest technology - OLED screens. And then they should be concave. If you cannot find such a place due to poor planning, then get very thick curtains;
- If the TV has a support and you plan to place it on the surface of the cabinet, then strictly guide the height of its hanging. The center of the screen must be at least 1.2 meters above the floor. Place the screen against the wall. Mark not only the center point, but also where the TV support leg ends. This way you can easily understand at what height to hang the cabinet. If the screen is attached to the wall, then its upper third should be located at eye level of the person sitting opposite. For the bedroom, the installation height is slightly reduced. On average, 1 meter is recommended. In general, do not overuse watching TV while lying down;
- Another important criterion is the distance from the TV to the chair or sofa. There is an interesting principle at work here. Measure the screen diagonal. The minimum distance should be 3 or 4 of its diagonals. The following standards are recommended. Diagonal 42 inches – 110 cm, 46 – 120 cm, 50 – 130 cm, 57 – 145 cm, 65 – 165 cm, 73 – 185 cm;
- Viewing angle. Wall-mounted cabinet options completely lose mobility. Therefore, give preference to TV models with a movable leg. This will allow you to rotate the screen. It is also better to choose wall brackets with the ability to move the screen horizontally or push it forward. Such fasteners will, of course, cost you more, but not so much as to ruin your vision.
TV tables have now become an integral piece of furniture in every home. Because in the modern world, life is simply unthinkable without a TV, which is now found not only in every home, but in almost every room. Nightstands are made from a variety of materials and have different shapes and designs. If the apartment is small or for the kitchen, a hanging TV stand is perfect. It has a number of advantages compared to other types of cabinets.
Hanging bedside table: design options, how to mount
Hi all! The topic of our conversation today will be a hanging bedside table, which can be a great addition to your bedroom.
I will try to reveal all the strengths and weaknesses of this solution. Together with you, we’ll see what they can be like, and what you should pay attention to when choosing or even when trying to assemble such a structure with your own hands.
Yes, hanging furniture looks original in the photo. But in life, with proper implementation, it looks even better. Therefore, it is worth thinking about using such furniture at home or in an apartment.
Choosing material for the cabinet
When choosing a suitable cabinet for the living room, it is very important to pay due attention to the materials from which the product you like is made, because it is this factor that largely determines the purpose of the structure and is responsible for its strength and durability. Natural wood in this case is considered a material that has no competitors. Such cabinets are environmentally friendly products, are durable and look simply luxurious. However, you will have to pay a price for quality.
Products made from MDF will cost much less. These cabinets are very attractive, durable and can last for many years. The only “but” is that owners of such furniture should protect the structures from mechanical damage.
Laminated chipboard is considered an inexpensive option for making furniture with a discreet design. Therefore, when decorating a living room, it is preferable to opt for higher quality items.
Another inexpensive option is to purchase plastic cabinets, which have a large assortment and a fairly attractive design. The disadvantages of plastic products include their predisposition to fading and instability to mechanical damage.
Living room cabinets made of glass always look beautiful and elegant, but they are a very fragile structure.
Purpose and functions
In fact, a hanging bedside table has a number of advantages and functionalities.
This is a mini-locker that is always at your side, literally at hand. From here you can get everything you need at the right time, and also store there:
In addition to practicality, cabinets also carry a solid aesthetic function, acting as an element of room decor.
Installation of suspended structures
In our case, it is intended to be mounted on a wall. This module is suspended above the floor, making the interior lighter, airier, and visually adding space to the room.
Structurally, suspended structures are practically no different from floor ones. Only they lack legs. Plus, the back wall still needs to be level so it fits snugly against the wall and doesn't cause unsightly gaps.
Sizes and shapes
Typically, a hanging cabinet includes 1-2 drawers, a top tabletop and an open shelf. You can vary the number of drawers and shelves at your discretion. Some people like completely open models, others prefer to have only a top tabletop, and the rest of the space is occupied by drawers.
To make a hanging bedside table look good in the interior, you need to determine the optimal dimensions. Usually they are selected based on the dimensions of the sleeping place, that is, the bed.
There are no strict standards, since everything in the interior is individual. But there is a typical width, which ranges from 40 cm to 60 cm, and it is recommended to choose a depth in the range from 35 to 50 cm.
The structures should not be made too deep, otherwise access to the sleeping area will be complicated. They shouldn't be tall either. Otherwise, the cabinets will rise greatly relative to the bed, which will create an imbalance.
Mounting methods
The bedside table can be wenge, white or black, soft or hard. You yourself decide what is better to buy. Take a look at the options offered in Ikea or other stores in St. Petersburg, Moscow and other cities, and take a closer look. You can always make custom cabinets, even if it is a little more expensive.
It is much more interesting and useful to talk about fastening.
There are 2 main options for attaching hanging modules for the bedroom and other rooms:
Hinges do not require much investment in terms of money. But such installation takes more time. First, the hinges are installed in the wall, and then the cabinet is hung on them. Accordingly, the cabinet itself should also have appropriate areas for fixation. Most often, the structure is hung on the heads of screws or bolts.
This method ensures maximum hole accuracy. It is important to maintain the level, otherwise you will not be able to adjust the position of the bedside table later. This is the main disadvantage of the method.
Installation using a strip is easier. This is a fittings kit that includes a perforated rail and hangers. The hangers should be fixed on the inner surfaces of the side walls of the bedside table so that the hooks are outside the back wall. The rail is attached to the wall using dowels and screws. And then the cabinet is hooked onto the bar.
The advantage of the plank is that the position of the cabinet can be adjusted.
But the design may not fit tightly to the wall, plus the kit itself is noticeably more expensive than a pair of hinges.
Facades
The façade of the product is formed by doors and shelves of drawers.
The wall-hung TV stand is equipped with hinged, folding and sliding doors.
- The swing version demonstrates strength, reliability, and durability. The doors are secured to the sides using furniture hinges. To open, just pull the sash towards you. It opens smoothly to at least 90°, providing a good overview of the contents. However, there should always be free space in front of the façade.
- The folding modification differs in that it is mounted to the bottom of the case. Special holders are also attached to the doors and sides, which ensure gradual opening, prevent a sharp fall, and redistribute the load.
- The sliding design saves space, as the doors move along guides in the vertical plane of the bedside table. Its weaknesses include: high cost, the need to prevent the mechanism, limited visibility, loss of useful volume.
The movement of the drawers is provided by roller or ball-type guides.
- The roller mechanism is designed for a weight of up to 25 kg, is inexpensive, but creates a lot of noise during operation and limits drawer extension by about 25%.
- Ball fittings will cost more, but will last longer. In addition, it does not have the disadvantages of the first option. Provides full opening, operates silently, and can withstand loads of up to 65 kg. Often the kit includes a closer and a damper.
By design, facades are divided into solid and framed.
The former demonstrate strength and durability, but have significant weight. The latter property is not welcome in a suspended model.
It is better to choose a product with paneled elements. They consist of a frame and a thin insert, which reduces the load on the fastenings. Framed facades will also delight you with a variety of designs.
Advantages and disadvantages
Let's start with the positive qualities. They are as follows:
But you shouldn’t forget about the shortcomings either.
And they are here too. We are talking about the following disadvantages:
If you take high-quality furniture and use strong fastenings, then the bedside table should not fall.
Here everyone must make the final decision for themselves.
Hanging bedside tables benefit from their original appearance, practicality in terms of cleaning and other obvious advantages. But again. Where you hung the furniture is where it will be in the near future. This requires carefully selecting the installation location in advance.
What do you think are better bedside tables, wall-hung or floor-standing with legs? Why are you for this or that option?
Share your opinion in the comments. If you have anything to add to the material, be sure to write.
Thanks everyone for your attention!
Subscribe, leave comments and ask relevant questions! Tell your friends about us!
Source
Advantages of these products
- The simplicity and reliability of the design of furniture from Ikea have long been known. The company's specialists always pay attention to the sustainability and good balance of their products. In the case of a television stand, this is especially important, since modern televisions have considerable weight and a specific distribution of parameters: large length and width with very small thickness. Ikea cabinets are very stable.
- The main material is chipboard laminated with melamine film: it is more resistant to moisture and chemically aggressive substances. The collection also uses birch and walnut veneer, giving the products a more sophisticated look. Individual elements - shelves, doors - are made of tempered glass.
Solid wood, pine in particular, is used much less frequently, but individual collections are made from it - Hemnes, for example.
- Ikea takes into account that a TV is usually purchased with additional appliances. Therefore, the dimensions of the compartments - shelves, drawers, pencil cases - are calculated taking into account the dimensions of audio and video equipment. Closed compartments must be equipped with ventilation holes, since operating equipment heats up noticeably during operation.
- Traditionally, Ikea models are quite neutral, but for the living room, items are made with a more pronounced stylistic identity. TV stands in the catalog can be found in classic, avant-garde, and minimalist designs.
The TV is truly the decoration of the living room, and great attention is paid to its design. Ikea designers offer not just models of different colors or sizes, but also excellent design, filling and design.
Stylish living room with TV stand from Ikea
Types of hanging cabinets
For TV
Often a hanging cabinet is used to install a TV. There is furniture specifically designed for installing TV receivers. They may involve placing the TV on the stand itself or hanging the screen on the wall. In the latter case, the cabinet is installed as auxiliary furniture.
The standard frame consists of:
Occasionally, drawers or shelves can be arranged.
Various materials are used in production:
Bedside tables can be made from the same material or combined.
A modern TV stand can have different sizes. This factor allows you to optimally select furniture for any room.
It is worth paying attention to the way the wires are placed. Niches for wiring are practically not used. Typically, wires are placed openly or by hidden wiring in the walls.
When choosing fasteners, you should take into account the total weight of the product and the TV. The fastening and the wall must withstand the load with a reserve. The following types of fasteners are used:
Make sure the load is evenly distributed.
When choosing equipment, you should consider what you plan to store in the cabinet. If you intend to store books or decorative items, then you should choose open bedside tables. If you purchase furniture with closed shelves, there are no requirements for stored items.
The equipment may include additional niches for equipment and household appliances. In some cases, additional lighting may be installed. Lighting makes the cabinet more decorative. It’s good if there are sockets, but if necessary, install them yourself. In some versions, niches are made for dishes or decorative items.
Under the bathroom sink
In bathrooms, cabinets combined with a sink are installed. This approach allows you to combine two functional items and save space. This is useful for small bathtubs and restrooms.
It is important to choose the right material. It is worth remembering that the wall-mounted cabinet in the bathroom is constantly exposed to moisture. Here is a list of common materials:
Separately, it is worth considering the mounting features. Hanging bathroom cabinets have their own characteristics.
When choosing a mounting method, you need to take into account the need to drain water from the sink.
Shelves and drawers are usually placed inside. They are used for storing household chemicals and personal hygiene items. The combination of shelves and drawers is selected individually. The boxes are equipped with rollers.
In practice, the following types of shells are used.
Bedside models
Many people prefer to use bedside hanging options in their bedrooms. They perform several functions at once.
An important feature of bedside tables for the bedroom is decorativeness. They should look good and fit into the overall interior. Another distinctive feature is its compact size.
The bedside wall cabinet has drawers and shelves. This allows you to comfortably store a variety of small items in it.
It is made from almost all furniture materials, but metal and glass are rarely used. Standard sizes are 40-60 cm in width, 30-50 cm in depth, and 20 cm in height. This is the most common footage, but there are other options.
To the hallway
For hallways, almost standard hanging models are used. The main difference is the presence of inclined or mesh shelves that are designed for shoes. There are also built-in drawers. They store gloves, hats and other small wardrobe items.
Usually the color is selected taking into account the general color scheme of the room, this will allow the bedside table to optimally fit into the interior. There are no special differences from other types here. All the same materials are used for creation.
What can a wall-hung TV stand be equipped with?
When deciding how to choose a wall-mounted TV stand, first decide what you will store in it. The standard storage system includes straight shelves in combination with drawers. The type of things stored depends not least on whether the shelves are open or hidden behind the doors. In open areas you can place decor, beautifully bound books, and vases. It's up to you to decide what to hide inside.
In this regard, additional equipment of the cabinet is important. This may include:
- Backlight. Helps you create an unusual design. Even if it is not provided in the basic configuration, this element is easy to install yourself;
- Sockets. You will also have to attach them yourself. They will be needed at a convenient distance from the TV;
- Niches for equipment. It is desirable that these sections have no back wall. This helps improve natural air cooling;
- Section for dishes. It will look especially beautiful with interior lighting.
There is no need to install large speakers or a subwoofer on a suspended wall. The oscillations and vibrations they create can result in the cabinet falling or the fasteners loosening.
Types of fastenings for wall-mounted cabinets
There are several ways to attach hanging furniture. You should choose a specific one taking into account the features of the wall, as well as the weight of the bedside table. Let's look at all the options in a little more detail.
When hanging, you should always calculate the dimensions accurately. Consider the placement height. For horizontal leveling, it is most convenient to use a laser level.
How to hang a screen in the bedroom?
The distance from the floor in the bedroom and in the nursery is measured to the middle of the screen. It is usually placed opposite the bed. It is important to take into account that it does not interfere with comfortable movement around the room. When determining at what height to hang a TV in the bedroom, you should take into account the size of the screen and the distance from the bed from which you usually watch programs and movies before going to bed. Experts believe that the optimal size would be 130 cm at a distance of 4 diagonal sizes. In this case, sitting on the sofa and lying down, the angle of view will not exceed 30°.
TV size chart
For ease of viewing from different positions, it is convenient to use a mount that allows you to change the position of the screen and rotate it around a horizontal axis. In this case, you can minimize the angle between the monitor plane and your eyes.
General selection criteria
Frame - dimensions and materials
The frame consists of four elements. The base consists of the lower and upper horizontal surfaces; they are connected to each other by two side walls. The back wall is usually attached to the frame last. The standard shape is rectangular. But, in principle, the form can be different. There are square, oval and other varieties.
The size range depends on the destination, as well as on the shape of the cabinet. Let's look at the most standard rectangular options.
The material is selected based on the installation location. For the bathroom it is better to choose moisture-resistant materials; for the living room this moment has only stylistic significance. Here are the most common materials:
Treatment and coating depends on where the cabinet is located. For baths and hallways, it makes sense to use moisture-proof materials for finishing.
Internal filling
Shelves and drawers are traditionally placed inside. In the case of drawers, be sure to use roller guides, this way they can be pulled out with minimal effort.
You can store almost any thing in wall cabinets. You can place whatever is convenient for you there. It is optimal to store those items that you will use near it.
Facades - structures and opening mechanisms
The facade plays a significant role in the choice. The following types are distinguished:
The following systems for opening facades are also distinguished:
Tabletops
Countertops allow you to safely use the top panel of the cabinet. They come in several types:
Facades - opening methods
The front side of the cabinet with doors is called the facade. The most commonly used types of facade opening systems are:
- Swing. The sash is attached to the intersectional partition or sidewall using furniture movable hinges. A very reliable method of hanging a door. But the system does not tolerate strong jerks or pressure. This may cause the fastener to break. When open, it takes up a lot of space;
- Folding. A convenient option for a wall-mounted TV stand. In addition to standard hinges, side holders with an open position lock are added. You will also need enough space in front of the cabinet. Do not try to pull the sash down after the latch clicks. This way you can tear out the holders;
- Retractable. This is a traditional drawer fitting system. Provision is made for mounting narrow side guides and small rollers. The internal contents are protected from dust;
- Sliding. The sashes are fastened with hinges in pairs. Equipped with an upper guide with a roller carriage. When opened they move to the side. The doors themselves fold like a book. When folded, they will stick out. The system is distinguished by ease of use and low noise level.
Styles
External individuality will be given by design in a certain style. This affects the appearance and outline of the silhouette:
Installing a hanging cabinet will add lightness and airiness to your interior. At the same time, the functionality of the furniture is fully preserved.
Source
What is the cabinet for?
Cabinet
A bedside table is a necessary interior detail in any room.
... In appearance, the cabinet
resembles a small cabinet with drawers, shelves and doors. From the name of the furniture it is clear that this piece of furniture is located near the bed. It is used to store magazines, books, lamps and of course an alarm clock.
Interesting materials:
How to turn on the digital tuner on a Samsung TV? How to turn on the BBK digital set-top box? How to enable Upnp on Windows 10? How to enable USB on Haier TV? How to turn on Wi-Fi on Dexp TV? How to turn on the touch hob? How to turn the hob on? How to turn on the flash on iPhone 11? How to enable flash on Android? How to turn on flash for notifications on iPhone iOS 13?
Step-by-step installation of a wall-hung cabinet with a sink
One of the common types of bathroom sinks is with a hanging cabinet. This design of the washbasin allows you to organize additional places for storing useful little things in an accessible place, but at the same time not overly cluttering the bathroom space. Sinks and cabinets have many designs, shapes and sizes, which allows you to choose plumbing equipment to suit any interior and bathroom dimensions.
Installation technology
Let's look at the features of installing washbasins for a bathroom with a hanging cabinet.
Necessary tool
To do the work yourself you will need the following tool:
You also need to study the manufacturer's instructions and check the package contents. The standard kit includes a sink, an assembled hanging cabinet, and fasteners. The mixer and siphon most often need to be purchased separately.
Note! The included hardware is suitable for concrete walls. If the equipment is installed on walls made of lightweight concrete (foam block, gas block, gypsum boards, etc.), it is necessary to use special dowels, which are additionally screwed into the concrete after drilling the hole.
For fastening into drywall, a special fastener is also used - Molly dowel.
Attaching a wall-hung sink and cabinet
The installation procedure for a self-supporting sink with a hanging cabinet is carried out in the following sequence.
Step 1
Markings are made on the wall. The installation height of the washbasin recommended by current joint ventures is 800–850 mm, but can be changed up or down taking into account the average height of all family members. This is one of the advantages of hanging cabinets under the sink - they can be installed at any height.
Marking includes the following steps:
We mark the attachment points of the sink, having previously measured the center-to-center distance between the holes.
Important! All marks are made using a building level so that the sink is installed strictly horizontally.
Step 2
Then, using a drill of a suitable diameter, holes are drilled for installing dowels in the wall.
Plastic dowels are installed into the drilled holes, into which pins are screwed for hanging the bowl.
Step 3
The washbasin is hung on studs and secured with nuts through plastic eccentrics, which serve to level the bowl and protect it from excessive clamping.
When the sink is secured, its horizontal level is checked. If it is necessary to adjust the horizontal, to do this, loosen the fastening nut by 1.5–2 turns. Fine adjustment is carried out by a plastic eccentric, which is turned with a wrench. After leveling the sink, the nuts are tightened again.
Advice! While the bottom of the washbasin is not covered with a box, it is recommended to install a mixer and a siphon, as well as connect to the pipes, since this will be more difficult to do after hanging the cabinet.
Step 4: installation of the cabinet
The hanging bedside table is mounted in the following order:
Step 5: Adjusting the Nightstand
Fine adjustment of the position of the cabinet relative to the sink and the wall is carried out using two screws located on the front of the decorative cover of the anchors:
Adjustment of fit to the wall.
