How to quickly tuck a blanket into a duvet cover

Option "Book"

This method is great for sets with a slit on the side or in the middle of one of the edges.
Lay the blanket out vertically and then fold it in half (like a book). You will get a rectangle (hello geometry lessons). It needs to be folded in half again.

In this form, putting the blanket into the cover is easier than putting a wide sheet of cloth into the cover.

Take the cover by the two upper corners, then, holding them in your hands, feel them through the duvet cover - they should be on top of each other. After the corner of the blanket matches the corner of the cover in each hand, open it wide and shake it thoroughly several times. Ready!

In the case of a side cut, the whole process is exactly the same, only the blanket needs to be laid horizontally, and only then folded into a book. The sequence does not change further (in fact, it is simpler than it seems at first glance).

10 Disgusting Household Habits That Will Make You Never Get Married

Let's select available means

The ingenuity of our women is amazing! Judge for yourself. To avoid finding a soft and voluminous lump instead of a bedspread in the middle of the night, they use a variety of available means.

clothespins;
safety pins;
large paper clips;
crab hairpins.

Whether any of this is worth using and what exactly to use, each woman decides for herself.

Of course, you need to be especially careful when using sharp metal objects when covering a child.

As you can see, there is an opportunity for experimentation in choosing the optimal method. Or maybe you have already found such a way?

Add short blankets

If you pay attention to the modern interior, you will notice that only the foot of the bed is covered with a small “podium” made of fabric. You can use the blanket of your choice. This technique creates a layering effect, and the layering, in turn, helps create a welcoming atmosphere.

...put on clothes

These are the clothes we put on. These can be completely different items, from an outer jacket to a neck scarf. But we wear everything related to wardrobe items.

The Russian language dictionary also speaks about this, in which synonyms for the word “put on” are indicated - these are to pull, to push, to clothe someone in something.

We put a hat, jacket and boots on the child. And we will put a suit and tie on the mannequin.

True, in order to avoid confusion, it is necessary to clarify that we wear not only clothes or hats.

The list of words used with the verb “put on” includes the following:

bijouterie;
decorations;
gloves, mittens;
a cover for clothes or a cover for a car;
mask;
pillowcase and duvet cover for pillow and blanket, respectively.

The list of words can be continued for a very long time, but it is important not to learn the words with which this or that verb is used. It is important to understand how to properly use dress or put on depending on the sentence

In order not to get completely confused, to feel the difference in the semantics of the above verbs, it can be noted that the words put on and dress have different antonymic pairs.

A blanket that doesn't need to be tucked into the duvet cover

If you change your bedding too often, it's reasonable that the duvet cover adventure starts to get boring. And this element of the kit creates additional hassle during washing. If you don’t want to waste time changing the product, then the best option would be a blanket-bedspread, which does not need to be tucked into the duvet cover.

This is a universal product, which, as you already understand, has two purposes.
It can be made of thin cotton, satin or any other soft and natural material.
If it is made from a more durable and dense fabric, then such a product already turns into an elegant and very beautiful bedspread.

In addition, this option is very convenient and good financially. Bedding sets are now expensive, and their quality is not always satisfactory. A duvet-bedspread completely eliminates the need to purchase a duvet cover. If you spend your money and buy a really high-quality item, it will last you for many years. You can be sure that washing will not harm the product in any way. It is quite resistant to both high temperatures and intense push-ups in an automatic machine.

Another plus is the sensations during sleep:

You won't even notice that you're sleeping without a duvet cover.
The fabrics from which the blanket-bedspread is made are very soft and pleasant to the touch.
In addition, you can find a product that will have optimal parameters for your bed.
To ensure that it fits beautifully into the interior of the bedroom, make sure that it is 30-40 cm wider than the edges of the mattress.

Now a little about the varieties of such blankets. Conventionally, products can be divided into 2 types:

Summer. They are light and thin, usually made of thick knitwear. They have a small layer that allows air to pass through well, but does not allow them to freeze when the air temperature drops.
Winter. These blankets are thicker, so they are warmer. They are made from velsoft with satin, satin, silk or even faux fur. The filler is polyester. You can find blankets and bedspreads made of jacquard or sheep wool. This is exactly what you need to feel warm and comfortable on cold winter nights.

Blankets for which you do not need to buy a duvet cover fit perfectly into any interior. In addition, this is a double saving: you do not need to spend either extra money on the purchase or time on changing the duvet cover.

Bedspread material

Typically, a bedspread lasts quite a long time, so when choosing a material for it, you should choose high-quality fabrics that can withstand frequent washing. It is also important that the coating is pleasant to the body.

If allergy sufferers sleep in the bedroom, there is nothing wrong with choosing a synthetic fabric bedspread, but it must also be of the highest quality.

Having decided on the fabric, you can buy a finished product in a store or sew a bedspread for your bedroom with your own hands. The following fabrics are often used to make bedspreads:

Cotton

Perhaps this is the ideal material for making a bedspread. All-natural linen quickly loses color and may shrink after several washes. Therefore, artificial threads are added to natural fiber, and such fabric retains its shape and color for a long time.

Silk

Decorates the interior in almost any style and always looks expensive. Thanks to the slippery surface, this blanket does not collect dust.

Viscose

This material is breathable, which does not allow moisture and microorganisms to accumulate under it. In its pure form it shrinks quickly, so mixed fabrics are often used.

Bamboo fabric

It would be a good idea to make a bedspread from bamboo fabric for your bedroom bed. The innovative fabric is made from fibers from the plant of the same name. The fabric is breathable and does not cause allergies.

Linen

Linen is a classic material for bedspreads. It is worth remembering that it can shrink and is difficult to iron.

Polyester

Polyester is great for allergy sufferers. This is a durable and smooth fabric that is easy to wash and iron. It does not allow air to pass through, so before making the bed after sleep, you need to let it air out.

Popular methods

To really make the process of making your bed easier, you need to know how to properly place a duvet cover on a duvet. This largely depends on where the hole is located on the duvet cover. Let's consider 3 methods, one for each type of duvet covers: with a hole at the bottom, on the side and in the middle.

How to quickly put on a duvet cover with a hole at the bottom

To begin, turn the duvet cover inside out and place it with the opening facing away from you;
Lay the blanket evenly on top and roll everything together into a roll;
After this, grab one edge of the roll through the hole in the duvet cover and turn it outward. Repeat the same on the other side;
Now carefully unfold the blanket back. Ready!

This is the fastest way, thanks to which you can cope with refueling in 60 seconds (you just need to practice), and with proper dexterity, the time cost will be no more than half a minute. One person can handle it, but it’s much more convenient to do it together. Details of the process in the video instructions below:

How to quickly put on a duvet cover with a hole in the side

Turn the duvet cover inside out and pull it over your hands through the side hole so that you grab two opposite corners with your fingers (one from the side of the head, the other from the side of the legs);
Now grab the corners of the blanket along with the corners of the duvet cover (one from the side of the head, the other from the opposite side);
Start turning the laundry inside out so that the blanket “climbs” inside;
Gently straighten the duvet cover and check that the second pair of corners fit correctly without getting tangled.

Expert opinion Maria Vasilievna Mikhailova Manager of a furniture store. Knows everything about comfort and interior design

With a hole in the middle

This type was very popular in Soviet times, but today it can be found in everyday life.

Press the blanket into an accordion shape and place it right in the middle of the duvet cover;
First, tuck one side of the garment in, carefully tucking the ends into the corners. Then repeat the same with the other side;
To be sure that the garment lays flat, shake it a couple of times.

We hope these secrets will help you make your bed faster than you did before. But keep in mind that you may not be able to do it perfectly the first time.

If you constantly stick to the chosen method, then you will get better and better each time, you will develop your own tricks and making your bed will become a pleasure.

Simplifying the problem before you start solving it

Before we tell you how to put a duvet cover on a blanket, we’ll reveal a few useful tricks that will make the process easier, regardless of the chosen battle strategy:

Choosing bedding: If the size of the duvet cover is chosen correctly, the duvet will not form lumps or folds inside it.
Duvet covers with a zipper on the cut are very convenient - such models provide fixation of the blanket and significantly save time when you tuck it in.
Iron the bed linen - thanks to this, it will “sit” more smoothly and evenly, and will not get too tangled while you make the bed + bonus: hygiene and disinfection.
Determine the type of your duvet cover: with a bottom slit, a side slit, or a hole in the middle - this will make it easier for you to choose the most suitable method from those suggested below.

More ways

Folk wisdom and ingenuity contributed to the emergence of several more methods for threading a blanket into linen. Some of them may be known from childhood, while others will be new. Nevertheless, such know-how also makes it possible to facilitate a process that is not the most pleasant and beloved by everyone.

A book

This option is suitable for duvet covers with a diamond or square neckline:

The blanket, depending on its size, should be folded in half along the long side or in four. The main thing is that the thickness allows this. In this form, it fits much easier and faster into the hole in the bed linen. If you had to fold it twice, then inside you will need to straighten it across the width.
Then the two corners are placed in their place, the blanket is straightened and, with the help of shaking, takes its place.

It will be easier to implement this method with two people - this will avoid lumps inside.

Inside out

A method of tucking a blanket, popular among hotel and hotel staff:

First you need to turn the duvet cover inside out, and then stick your hands in and grab the two far corners.
Then take two corners of the blanket through the fabric and shake it.

Using this method of making a bed requires some preparation; it is quite difficult to do it alone. But with someone’s help, everything will work out easily and quickly, requiring only smoothing out the folds.

Climb into the duvet cover

A somewhat exotic method, suitable either for very large laundry or for the smallest. Its authors suggest getting into the duvet cover entirely, and then pulling the blanket with you and straightening it inside. Theoretically, it can be effective, but in reality in this case several factors must coincide. There is also a high risk of the laundry tearing during the tucking process.

Using clothespins

This method was invented for duvet covers with a side slit:

First, you need to roll the blanket along the long side.
Then its free corners are straightened inside and fixed using the most ordinary clothespins.
After this, the laundry is shaken and the roller inside rolls out on its own.
All that remains is to straighten out the resulting jams.

This method will help if the blanket is very heavy or made of slippery fabric that is difficult to fix inside the duvet cover. Instead of clothespins, you can use paper clips or other similar items.

Main types of making a bed in a hotel

GOST R 51185-2014

NATIONAL STANDARD OF THE RUSSIAN FEDERATION

Tourist services. Means of accommodation. General requirements

Date of introduction 2016-01-01

1 DEVELOPED by the Open Joint Stock Company "All-Russian Scientific Research Institute of Certification" (JSC "VNIIS") with the participation of the Department of Tourism and Regional Policy of the Ministry of Culture of the Russian Federation

2 INTRODUCED by the Technical Committee for Standardization TC 199 “Tourist services and accommodation services”

The rules for the application of this standard are established in

GOST R 1.0-2012
(section 8). Information about changes to this standard is published in the annual (as of January 1 of the current year) information index “National Standards”, and the official text of changes and amendments is published in the monthly information index “National Standards”. In case of revision (replacement) or cancellation of this standard, the corresponding notice will be published in the next issue of the information index “National Standards”. Relevant information, notices and texts are also posted in the public information system - on the official website of the Federal Agency for Technical Regulation and Metrology on the Internet (gost.ru)

1 area of use

This standard establishes general requirements for accommodation facilities and the services provided in them.

The provisions of this standard apply to various types of accommodation facilities intended for temporary residence of tourists (hereinafter referred to as accommodation facilities) and the services provided in them.

This standard is intended for use by legal entities, individual entrepreneurs and individuals providing accommodation services.

Note - Individuals provide accommodation services in accordance with current legislation.

Based on this standard, regulatory documents can be developed that establish requirements for various accommodation facilities, and standards for organizations providing accommodation services.

2 Normative references

This standard uses normative references to the following standards:

GOST R 50644-2009 Tourist services. Requirements for ensuring the safety of tourists

GOST R 53423-2009 (ISO 18513:2003) Tourist services. Hotels and other tourist accommodation facilities. Terms and Definitions

GOST R 53997-2010 Tourist services. Information for consumers. General requirements

GOST R 54599-2011 Services of accommodation facilities. General requirements for the services of sanatoriums, boarding houses, recreation centers

GOST R 54603-2011 Services of accommodation facilities. General requirements for service personnel

GOST R 54606-2011 Services of small accommodation facilities. General requirements

GOST R 55319-2012 Services of accommodation facilities. General requirements for specialized accommodation facilities

GOST R 55699-2013 Accessible accommodation facilities for tourists with disabilities. General requirements

Varieties

Today, the classic blanket is being replaced by a duvet cover. This unusual option is great for winter, summer, and the off-season. On hot days, it should be used alone. Thin fillers and pleasant natural fabric will make you feel comfortable even in the hottest heat. You no longer need to look for blankets, which are not always pleasant to sleep under, and you no longer need to use decorative bedspreads. In winter, such a duvet cover can be used for its usual purpose, tucking another warmer blanket inside. Exact matching of sizes allows you to do this without difficulty.

An interesting solution for the bedroom is to replace the duvet cover with a bedspread, which can also be used as a fairly light blanket. Unlike decorative models, the bedspread in this set has a special lining on one side. Natural fabrics are pleasant to the body, absorb moisture well and at the same time keep you warm, unlike low-quality synthetics, which can even cause irritation on the skin.

Additional items

A made bed can be decorated with a crossover. As such, special paths, blankets or additional bedspreads are used. The perekid is placed both on top of the bedspread and, in its absence, on top of the blanket. Layout options may vary.

Most often, the crossover is placed at the feet. Options with an asymmetrical arrangement of the element look beautiful.

What are the types and sizes of duvet covers?

Duvet covers come in many varieties. The classification is based on the location of the cutout, shape, and fastening method. It is customary to distinguish two main categories – “B” and “C”. “B” has a cutout in the middle. And “B” represent closed products. Most often they have a special clasp.

Based on the type of holes, duvet covers are divided into:

with a hole at the bottom;
A slit at the bottom is a popular type of duvet cover, characterized by convenience and the possibility of double-sided use.
with a hole on the side;
A side slit is a popular option for a baby blanket, in which the blanket does not fall out of the cover
with a hole in the middle.
Cut in the middle - Soviet version with a square, rectangular, diamond-shaped hole or a narrow stripe in the center

The most popular now are products with a hole at the bottom. They are the most convenient and practical. Products with a slot in the middle were actively used during the Soviet era. But practice has proven their inconvenience when changing bed linen. Each type has its own special tricks regarding operation.

Depending on the size, bed linen sets are divided into types

Duvet cover sizes include:

one and a half;
One and a half set of bed linen
double;
Double bedding set
European standard;
Euro size flannel bedding set
family;
Family bedding set with two duvet covers
children's
Children's bedding set for a little princess

It is very important that the duvet cover fits the size of the duvet. This will significantly save the housewife’s energy.

Incorrect selection will also interfere with direct use: lumps may form that will interfere with sleep.

Learning the type and size of duvet cover will make changing bed linen much easier. This will help you quickly find the right “life hack”.

Choosing the correct location of the septic tank on the site: norms and restrictions

Distances to different objects

The following list specifies the location of the septic tank on the site (SNiP):

Compliance with current regulations must be observed when using homemade structures and factory kits.
The distance to open bodies of water and sources of drinking water is especially strictly controlled. It does not matter on whose property the well is located.
Sometimes the most distant and lowest point is chosen. But in such situations, it is necessary to take into account the proximity of roads, neighboring territory, and possible flooding during flood periods.
When equipping a full-fledged residential building with a local wastewater treatment system, it should be agreed with the BTI.
Sealed containers of the system can be installed closer to the foundation. But you cannot violate the norms in relation to drainage fields and ditches.
It is permissible to reduce the distance to the well (minimum 30 m) if this source is installed higher from the treatment system, in the direction of the natural flow of water.

When installing a septic tank with your own hands for a private house with a high groundwater level, the drainage part is raised onto a special bedding. To supply liquid there, a pumping station operating in automatic mode is used.

Through the corners

Anyone can put this product on a blanket through the corners, and alone. You just need to read the step-by-step guide once, and after that it will be very easy to do:

First you need to take a clean, ironed duvet cover and turn it inside out.
After this, you should place your hands in the inner part of the duvet cover, which in our case is the front one, and feel the upper two corners there.
Then you need to stick your hands into these corners, as if putting them on your fists, as if you were stringing a rag doll. The main thing is not to confuse the inside and outside of the duvet cover and the appropriate edge of the duvet.

Next, you should take the second item in your hands, on which the corners of the duvet cover are strung, and thus combine the two upper corners of both items

Which angle you should start from will depend on which side the slot is on the product. It is necessary to hold each corner with your hands very firmly, since later you will be holding both of these elements completely by weight, and it is important not to lose the matched corners. Then you need to sharply turn the Monday right side out in one motion, thus throwing it over another product. After this, you should gently fluff the blanket. This can be done by shaking it with your hands.

It is important that the product rolls down and the blanket in it is completely straightened. The easiest way to straighten such a duvet cover is to spread it out on the bed.

After this, you need to carefully close the slit or fasten a zipper or button on it. This is a fairly simple method that takes literally 5 minutes. This life hack is one of the most popular in this matter.

You can insert one product into another through the corners a little differently:

To do this, you need to completely straighten the duvet cover and lay out the straightened second product next to it.
Then you need to take a corner of the duvet cover in one hand, and the two upper corners of the blanket in the other hand and push one into the other.
It is necessary to find the two necessary corners inside from the outside and bring them to the edge of the first product, then this process must be repeated with the bottom of the blanket. This way it will be easily inserted; all you have to do is shake it a few times so that it is evenly distributed inside.

Diving option

Children's favorite method if you trust them with this process. However, why not, it’s so intriguing to be inside a duvet cover. You need to climb completely into the cover, pull the blanket in there and then straighten it inside. In theory, everything will seem simple and quick, but in practice, taking into account certain factors, the process may take a long time.

Well, this is quite risky: you can tear the cover in the process of such “diving” actions. However, the procedure can be simplified and only partial “diving” can be carried out.

To do this, turn the duvet cover inside out and insert your hands into 2 corners. Then they grab 2 ends of the blanket, turn the cover inside out and pull the blanket through so that one half is “in the clothes.”
They do the same with the second half of the product: insert their hands into the remaining corners of the inverted part and pull the blanket through.
At the end, the laundry needs to be fluffed, grabbing it by the edges so that the bedspread is free of lumps inside.

So, partial or complete “diving” will allow you to tuck the blanket into the fabric, only in the second case it is advisable not to overdo it, so as not to tear the base of the cover.

How to quickly and correctly tuck a blanket into a duvet cover with a hole at the bottom: the best way, video

How to quickly and correctly tuck a duvet into a duvet cover with a hole at the bottom There are several best ways to make changing your duvet cover as easy as possible. Previously, the most popular products were those with a hole in the middle. And they were usually produced by manufacturers in fairly large sizes, so “dressing” the blanket was not very difficult. But today you can find completely different variations of the cut, each of which has its own characteristics. How to quickly and correctly tuck a blanket into a duvet cover with a hole at the bottom?

To complete the task as quickly as possible, follow these simple steps:

Quickly and correctly tuck a blanket into a duvet cover with a hole at the bottom

Turn the product inside out and unfold it with the cut facing away from you.
Place a blanket on top of the product and straighten it well. Make sure there are no lumps or bent corners.
Roll everything together with a roller.

Quickly and correctly tuck a blanket into a duvet cover with a hole at the bottom

Place your hand through the slit of the duvet cover, pinch one edge of the “roller” and turn it outward. Do the same, but on the second side.
Carefully and slowly turn the blanket right side out. All is ready!

This is a very fast and easy way. It will help you complete the necessary steps in just a few minutes. You no longer have to spend a lot of time changing your duvet cover. For more details, see the description of this method in the video:

How to beautifully make a bed with one or two blankets?

A beautifully made bed with two blankets.
A neatly made bed is an example of cleanliness and tidiness. There are several simple and quick ways to help you do this without much effort. How to beautifully make a bed with one or two blankets?

Method one:

Place pillows on top of the sheets at the base of the bed. If there are several of them, make sure that they are on the same straight line. But they should not touch each other.
Next, lay out a blanket or blanket. If you sleep on a single bed but with a double blanket, then fold it lengthwise twice. It should not hang over the edges of the bed.
Place a blanket on top of the blanket. It, as you already know, should have greater parameters than a mattress and a blanket. Straighten it so that there are no wrinkles on it.

This method can be called classic, since many of us use it at home every day to beautifully make the bed.

Here's another method. Suitable for making a bed with two blankets:

Lay one blanket over the sheet, spreading it out well.
Fold the second blanket so that it covers the entire part of the bed where the pillows are. However, if there are several pillows, do not fold the blanket too tightly so that it does not look like one big lump.
Now cover the bed with a blanket. Flatten it well so that there are no wrinkles or unevenness. Cover the blanket with a blanket too; it is unacceptable for it to peek out from under it. The same applies to the sheets.
Finishing touch. Place the pillow (or pillows) where the second blanket is. It should be on top of the bedspread, not under it.

These methods of making a bed are suitable in any case.

It doesn’t matter at all whether you have one blanket on your bed or two. The scheme is relevant for both options, only in the second case the process will take literally a few minutes

But your bed will look well-groomed and tidy, and this is important not only if you are expecting guests. Your eye will rejoice every time seeing such perfect cleanliness on the bed, and this will have a positive effect on your mood. Good luck!

Read on topic:

How to properly wash bed linen made of linen, cotton, and satin?
Poplin, satin or calico: which is better for bed linen?
What day of the week is best to change bed linen?
How to choose bed linen according to Feng Shui?
How to choose the right mattress for a double bed?

A few general rules

Select textiles (bed linen, bedspreads, decorative pillows) in such a way that they not only match each other, but also harmonize with the decor in the bedroom.

Please note that curtains in the same color scheme with a bedspread and decorative pillows make the interior of the room complete, but this does not mean that they should be made from exactly the same fabric. Otherwise, your bedroom will resemble a room in a not-so-best hotel.

The bedspread should be at least 20-25 cm larger in width and length than the size of the bed. Sometimes it can go down almost to the floor. A bedspread that is too short looks unsightly.

The combination of different materials looks especially impressive and expensive. Play with textures, for example, try combining smooth shiny satin and thick, rough linen.

A blanket folded at the bottom of the bed can be an eye-catching addition thanks to its interesting material texture or pattern.

Be sure to use decorative pillows to decorate the bed, but do not overdo it with their number - as a rule, two or three are enough to create a beautiful composition.

Photo: Pixabay.com

Adviсe

Few people know, but the reason for the difficulty of threading the blanket into the cover may be the material of the duvet cover, as well as non-compliance with the parameters of both pastel accessories. We often criticize sellers for producing non-standard products, not paying attention to the dimensions, and we are sincerely surprised that the blanket does not want to fit inside the cover.

To simplify the procedure of putting on a duvet cover and save nerve cells, you should take note of a few simple tips:

Use natural fabrics. When inserted, the synthetic material will be magnetized, which will slow down the process - the duvet cover will begin to stick to the blanket, rewarding the user with a discharge of static electricity.
Buy the sizes correctly, observing the parameters of the blanket. The elements must match each other: a small size will wrinkle and create lumps; in a large duvet cover, the blanket will “get lost” and become tangled. In this case, your vacation will not be as comfortable as possible.

Do not hurry. It can be difficult to use life hacks on your first try. It’s worth practicing to easily get used to them and put on the duvet cover quickly. If the first time may take you a few minutes, after a couple of attempts you will meet the promised 30-60 seconds.
Secure the inserted product. If your children or you are active in their sleep, a blanket packed in a duvet cover will quickly become like a shapeless lump in a bag. There are different methods for fixation (for example, ribbons that are tied together), but they should not be extreme (pins or metal clips are not acceptable).

Choose a model with a clasp. Better than other types of duvet covers with a zipper fastener. This way the blanket will not come out of its cover, adding inconvenience to users. If the fastening is provided with buttons, fasten them at an angle (so that they look inside the duvet cover). This will help you get rid of the unpleasant cold and pressure of buttons, feet and fingers getting stuck in the hole of the duvet cover. Another modern type of fastener is buttons; they are convenient due to their internal location.
Convenience. To make putting it on easier, iron the duvet cover - this is both disinfection and smoothness. Or just shake it well and turn it inside out to make it easier to thread and handle the threading process.

It's hard to find people who like to tuck blankets into duvet covers. However, there are those who have adapted, using simple methods, to easy threading. Today, simple and easy threading of a blanket into a duvet cover is available even to men.

You can also learn how to quickly and easily tuck a blanket into a duvet cover from the video below.

Cleaning other guest rooms

In addition to the rooms, there is a hall, lobby, restaurant, bar, conference room, elevators, toilets, stairs and corridors for guests.

Employees clean elevators, staircases and corridors during the day, when most of the guests are absent.

The hall, lobby and toilets are cleaned continuously, around the clock. As it becomes dirty, you need to wipe the floor, clean all surfaces from dust, replace chairs and lay out pillows on sofas.

Hotel lobby

The restaurant, bar and conference room are cleaned by maids at night when the premises are unoccupied.

Hotel bar

Hotel restaurant

Hiding under a bed in a dream means not having the ability to cope with the current situation on your own in real life. The universal dream book warns that this state of affairs risks leading to moral exhaustion and depression.

Falling out of bed means finding out about the betrayal of a loved one. Also, such a dream predicts a decline in authority as a result of the vile intrigues of “well-wishers.”

How to easily tuck a blanket into a duvet cover

So, let's no longer pull the cat by the tail and other limbs - let's get to the point and consider some of the most effective, working and proven tactics.

Traditional method – “Pillowcase”

This method was passed on to us from wise mothers and grandmothers - proven, reliable and the most widespread. In the same way, put a pillowcase on the pillow. It is most suitable for duvet covers with a bottom slit.

Follow these steps step by step:

Turn the duvet cover inside out.
Put your hands inside so that your palms rest on the two upper corners.
Now, with the duvet cover in your hands, grab the top two corners of the duvet.
Shake the blanket, continuing to hold it by the top corners through the duvet cover, so that it straightens from top to bottom.
If necessary, lower the rest of the duvet cover to the bottom of the comforter and tuck in the bottom corners.

A little trick: if you are short, stand on a bed or chair so as not to turn the blanket into a doormat and allow it to fully expand on its weight.

Creative life hack – “Roll”

This innovative method is suitable for duvet covers with a slit at the bottom and side. So, get ready: this instruction sounds quite scary, but in reality everything will be much simpler (may the attached pictures help you!).

Turn the duvet cover inside out and lay it on the bed.
Cover it with a blanket on top.
Roll this into a roll, starting on the side opposite the duvet cover cut.
Insert your hand into the hole and, starting from the side, as if putting a cap on the edge of the roll, turn the bottom of the duvet cover onto the top of the roll - and continue along the entire length of the roll.
Straighten the blanket.

A little advice: don’t reject this method if it doesn’t sound too clear: when you hold the blanket in your hands and feel the design, everything works out by itself and the words take on a tangible meaning - tested by the authors. Start practicing right away, looking at the instructions as you go.

For special occasions – “Book”

The first two methods solve problems with the most popular bedding sets. How can owners of rare pieces from the USSR quickly put on a duvet cover with a slit in the middle? The “Book” method. It is also suitable for models with a side slit.

Fold the blanket in half vertically – like a book.
Fold again - vertically again.
Insert the blanket into the duvet cover: in this position, doing this is much easier and more convenient than pushing the blanket open to its full width - there is practically no risk of getting tangled in the duvet cover.
Take the duvet cover by the two upper corners, then, holding them in your hands, feel the two upper corners of the blanket through the duvet cover - they should be on top of each other.
Once you have a corner of the blanket aligned with a corner of the duvet cover in each hand, open the blanket wide and shake it well.

For people who love peace and solitude

If you are an introvert to the core or have a cat-like essence, then there is nothing better for you than crawling into a duvet cover and leisurely fiddling with the blanket there: soft, warm and cozy, like in a personal mink. Surprisingly, many people prefer this option instead of “all those newfangled life hacks of yours.”

How to quickly and easily tuck a blanket into a duvet cover (video instructions)?

How to quickly and easily learn how to tuck a blanket into a stupid duvet cover with one slot, and not with a square/diamond in the middle? Need video instructions!

How to quickly and easily tuck a blanket This simple video will help you, which I will post below my text answer. In general, you just need to start tucking the blanket from the two narrowest corners of the duvet cover - and from them the other two corners - and then tug hard - and everything will straighten out as it should.

Good question, I know how difficult it is for a fragile girl or woman to cope with tucking a 200x240 size blanket into a duvet cover. I also found a wonderful way to fill it up simply and easily.

Turn the duvet cover inside out, spread it on a flat surface (on the bed), put the blanket on top, carefully align the corners of the blanket and duvet cover and roll everything into a bolster, but so that the cutout in the duvet cover remains on top and not inside the bolster. It’s better to watch the video on how to do it correctly:

and another option for tucking the blanket:

Not everything will go so smoothly the first time, you will have to adjust the corners a little, but over time everything will turn out more accurately and quickly.

Oh, horror, I still remember those times when absolutely all duvet covers had a cutout in the middle)) But in those distant times, now the process of changing a duvet cover does not cause any positive emotions, just dull irritation. Especially if the duvet cover has a small cutout on the side, and my duvets are double!

You can only sympathize with the maids in good hotels who change dozens of duvet covers every day! However, you can also learn some tricks from them - after all, it was they who came up with the famous method of changing a duvet cover by rolling the blanket into a roller! For which I bow to them)) The procedure did not become pleasant, but faster and less annoying - for sure.

So, to quickly and easily tuck a blanket into a duvet cover:

Turn the duvet cover inside out and lay it on the bed.
Lay a blanket over it.
Roll this design into a roll (start from the end opposite the duvet cover fastener, that is, the end without the hole)
Now, as it were, turn the “sausage” out, hiding it completely in the duvet cover (it’s better to watch this moment in the video below).
All that's left to do is unfold it. Ready!

Making the bed for love and change

It's nice and easy to lie in a good bed

It is not for nothing that special attention is paid to its preparation. Previously, there were special servants for this. People, by the way, spend up to a third of their time or more sleeping

It's no surprise that you often have to make your bed while you sleep. And fate may depend on the quality of the preparation of the bed and other features. Just remember the fairy tale “The Princess and the Pea”

People, by the way, spend up to a third of their time or more sleeping. It's no surprise that you often have to make your bed while you sleep. And fate may depend on the quality of the preparation of the bed and other features. Just remember the fairy tale “The Princess and the Pea”.

Making the bed in a dream:

Expect change in reality. For a woman - in love, personal relationships. For a man - for work, work, moving.
In an open area, not indoors - discover new opportunities, find an interesting job, reconsider the meaning of life.
In someone else's house - expect unplanned guests. Don't be alarmed, they will bring not only unnecessary troubles, but also good news and fun (the same if you sleep on a wide bed).
Beautiful and even - to calmness and good mood.
With blunders and negligence - to a loss of faith in one’s own strength.

Remaking the bed means the need to get rid of the past that does not want to leave you. If you have completed this procedure completely, on the contrary, your subconscious mind tells you to return to your previous life.

Spreading out a bed for a dead person, if a sick person dreams of it, means a worsening condition. Other people face quite long-term troubles, including health problems. But there is also a version that a breakthrough awaits you, income even in a business in which no prospects were seen.

The meaning of children's underwear on a rope according to the dream book Why do you dream about new bedding Why do you dream about a hotel

What makes it easy to tuck in a blanket?

Many argue that it will not be possible to quickly tuck a blanket into a duvet cover properly, even if you try very hard. Well, maybe so, but you can still make your life easier. A few preliminary manipulations will help make this action less nervous.

Before starting work, iron the duvet cover. Under the iron, the fabric will be disinfected, it will become more attractive in appearance, it will not wrinkle so much later, and finally, it will be much easier to put on a blanket.
Choose a blanket and cover made of natural fabrics - this will simplify the dressing process. Synthetics are known to be magnetized and electrified. Agree that the products begin to stick to each other, and the process becomes more complicated.
Choose a duvet cover that is only the same size as the bedspread, otherwise you will either have to fish it out all night or have difficulty squeezing it in. As a result, you will get a knocked down covering product, under which it will be uncomfortable to sleep.

Speed is not a very good ally in this matter.

But first, adapt to the method that is more acceptable to you. Along the way, prepare yourself some tools that will make your work easier. For example, there are special corner fasteners (you can also use regular clothespins), textile pins and other little things that make life easier at these moments.

So, below is more about the most popular ways of tucking a blanket into a duvet cover. Some you remember from childhood, others may seem strange to you, but different generations show ingenuity. We thought and looked for options at all times in order to make the not-so-pleasant process easier.

Pillows

This is where you can show maximum creativity, so it is in arranging pillows. Combine regular pillows with decorative ones.

There are no strict rules or recommendations in this matter. Just don't try to hide them under a blanket or blanket.

Duvet cover sizes

Blankets can have standard sizes and be adapted to the dimensions of the sleeping area. Most often, sizes are dictated by GOST; options prepared at home may not adhere to generally accepted standards. The dimensions of the duvet covers are adjusted to the parameters of the blankets.

All types of accessories are divided into four lines:

Single. 75x180 cm is the smallest size in this category. The width of the duvet cover varies up to 120 cm, the height is usually about 190 cm. Among all its counterparts, such an accessory is less in demand: its width is not convenient for an adult to sleep (it is more appropriate for a teenager).
One and a half. 155x215 cm - a popular and often found “euro-one and a half” size. 140x205 cm – Russian size according to GOST. This duvet cover is more comfortable and is a popular pastel accessory.

Double (family). The category includes models for two and Euro parameters (175x205, 195x215, 220x240, 240x260 cm).
Children's. 110x140 cm, 125x150 cm - adapted to the size of baby cots. “Teenage” size – 143x210 cm, 150x200 cm.

Each line includes a lot of sizes, which allows the buyer to choose a blanket cover as accurately as possible. When purchasing, take into account the dimensions of a particular product, although ideally the duvet cover should be at least a couple of centimeters larger (it shrinks after washing).

Classification

With this piece of bedding you can make your sleep more comfortable. It creates an additional thermal layer for the body. In the end, it's just hygienic. To tuck it into the duvet cover, there was originally a hole in it. Based on its location, the main classes of the product are divided.

Bottom cut

. The most popular and convenient type, its main difference is the ability to use it on both sides. It is desirable that it has a fastener in the form of buttons or a zipper. This makes it much easier to use. The insides don't fall out.

Slot on the side

. This option is often used for children's bedding, as there is a cover. This model came to us from Europe. Nothing will fall out of it and get dirty. Hole in the center. This type of tailoring comes from the Soviet Union. It may look like a square, rectangle, diamond, or just a narrow strip. It is inconvenient when refilling, and the product itself can only be used on one side.

From the inside out

A rather unusual and interesting way, which many people now use, is to put on a duvet cover from the inside out in the form of rolling two products into a roll:

Initially, you need to compare these two products and compare their size; if it matches, then you can proceed to further actions. So, you must first take and turn the duvet cover inside out and place it on the bed with the hole facing down.
It should be properly smoothed and straightened so that there are no unevenness or folds.
Then you need to put a blanket on top so that it completely covers the first product and each corner overlaps the other.

After this, you need to take any one corner of your choice and start twisting these two products together into a roll from top to bottom, reaching the middle, and you only need to hold on to one corner.
After this, you need to take the opposite corner and start twisting these products in the other direction, from bottom to top to the middle. This way you will have two parallel rolls that meet in the middle. It turns out that the hole needed to insert the duvet cover is under these two rolls.
Then you should take each corner from one side and turn each of them to the wrong side through the slit of the product.
Afterwards, you need to unroll the roll already inside and shake the blanket at two corners, so it will very quickly and easily be inserted into another product.

There is also another way to turn out a duvet cover using the roll method:

In this case, the hole of the product is located on the bed not at the bottom, but at the top. The second product is laid out on it and rolled up on both sides with a roller to the middle, as was the case in another case.
After this, you need to carefully insert the two inner ends of each roll into the slot of the duvet cover and start rolling them away from you.
Then you should insert each corner of the blanket into the corner of the duvet cover and pull them apart in different directions, straightening them in your hands. Then you need to shake it slightly.

They also roll it up a little differently. The linen should also be turned inside out and laid out on the bed, with a blanket placed on top of it.
Both of these products are then carefully wound into one roll, and it is necessary to move from the opposite end of the duvet cover, which has no hole.
Then the resulting structure must be turned inside out so that it is completely straightened inward.
Then the resulting “sausage” just needs to be unfolded and the blanket will already be inside, and it will be completely straightened out. It's very convenient and fast.