Do-it-yourself garden swing made of metal: popular homemade options + drawings and assembly instructions

Are you tired of the city bustle? Do you want peace, tranquility, peace? The best option for relaxation is the open spaces of a suburban area. One of the elements of comfortable relaxation is a garden swing. In specialized stores they are not cheap, but making a garden swing from metal yourself is not so difficult. The main thing is to have an idea of the correct design and methods of its manufacture.

We will tell you where to start and what you will need to build a homemade product in our material. Next, we will figure out how to assemble a garden swing with our own hands, starting from drawing up a drawing and ending with installing the swing on the site.

Advantages of a metal swing

The variety of homemade garden swings on the Internet is simply impressive. What they are made from - metal, wood, tires, forging and many other materials.

We will look at one of the most popular models - a metal swing.

The advantages of a metal garden swing are many:

Durability . The metal does not naturally rot, does not crack, and does not dry out.
Reliability . This is the strongest material used for this type of structure.
Availability . Good metal costs much less than wood of a suitable quality level.
Variation in design . Any of your preferences and wishes can be realized with the help of such material.

As you can see, the advantages of metal structures are impressive, so you can safely give preference to this option.

The classic metal swing is designed for one person, but there are options that can accommodate four users at once

Do-it-yourself swing for a summer house: photos and classification of products

Traditional materials for making outdoor swings for your summer cottage with your own hands are metal and wood. In order to improve reliability and external characteristics, you can combine these materials, as well as partially decorate the metal structure with decorative forging.

Bright cocoon swing suspended from a tree branch

For construction you can use:

bars;
plastic;
strong rope;
metal pipes;
old armchairs or chairs from which the legs must first be removed.

A comfortable swing is suitable for sleeping in the fresh air or reading

Car owners can use old car tires. They will go well with flower beds made from the same material.

Classification of swings for a garden with your own hands

There are a large number of original and comfortable swings that can decorate the landscape of any summer cottage.

Conventionally, they can be divided into three large categories:

mobile – the products have a lightweight, portable design, so the swing can be moved around the site to any convenient place, for example, in the house, on the veranda, in the gazebo or under a canopy during the rain;

Mobile version of a swing with a metal base

family - products with a massive and weighty design. In their design, they resemble benches without legs with a large and high back. Due to its large dimensions, the whole family can fit on the seat. To ensure safe operation of such swings, they are securely mounted on a U-shaped frame. Strong cables or thick chains are used as clamps. If you arrange a roof or awning over the swing, you can use it even in the rain;

Cozy swing located on the open terrace

children's - a special category of products, usually shaped like boats or hanging chairs. Structures are subject to special requirements regarding the frame, which must comply with all safety standards. Very young children can use the swing only in the presence of adults and with the use of special belts. With their help, the baby is fixed in the seat and therefore cannot fall out.

Children's swing with a metal frame, painted in bright colors

Varieties and photos of swings in the country with your own hands

Swings can be classified according to other criteria. The following types of products are distinguished by type of design:

hammocks - suspended on a metal crossbar. A tree with a thick and straight lower branch can serve as a substitute for a crossbar. When using this design, a person gets the impression that he is floating above the ground. Such swings are in great demand among those who enjoy reading books;

Hammock swing is a great option for relaxation and admiring nature

single - products with various types of structures that do not require the installation of additional crossbars. This swing is characterized by a quick installation system and can be installed anywhere. A variety of materials are used for manufacturing;

Beautiful hanging swing in the garden of a private house

suspended – structures are a seat suspended by several ropes or chains. Ropes are attached to the sides. Thanks to the use of various materials that make the product durable, comfortable and lightweight, hanging swings can have different shapes and sizes;

Cozy hanging swing made of fabric, created by yourself

sun loungers - products can accommodate a family consisting of two adults and one child. The swing has a special design, which involves fixation at a single attachment point, which allows you to install it in the room. The material used for manufacturing is a special metal alloy. Despite the apparent airiness, these products are very durable.

Large family swing with metal frame

Tools and materials for work

To manufacture metal structural elements you will need: steel corners, square profiles, round profiles, I-beams.

In addition, you need to prepare material for seats and a canopy if you plan to build an option with a canopy.

For work you will need to prepare: a welding machine, an angle grinder, a screwdriver, a level, a tape measure, a shovel, a construction bucket, brushes, sandpaper. You may also need a pipe bender to bend a profile pipe.

Bench swing

This is a rather complex and painstaking option, but the finished swing is very beautiful and elegant. It is perfect for adults because it is more spacious and can withstand more weight.

You will need:

About 0.2 cubic meters of wood for the frame and bench, hooks, brackets, slats, bolts and nuts, chain.
How to do it:
First, select a suitable drawing - they are quite the same type, so choose by size. All boards must be cut, cleaned and treated with a special primer. You will need bars of different thicknesses - it’s easier to see in more detail in the video.

First of all, assemble the frame with the crossbar and cut off all the excess, and then assemble the bench with the back. The chain is inserted into wooden washers, which need to be cut out separately. Before assembly, sand and paint all parts with special paint for wood.

The base is the main structural element

The stands of the garden swing must be reliable and strong. They ensure the stability of the entire structure. When making a swing from metal, it is best to choose an A-type or P-type base. Both options are quite stable, but at the same time easy to manufacture.

Option 1 - A-type base

This design consists of two racks in the shape of the letter A, connected by a jumper. To assemble them, you need to draw a drawing indicating all dimensions, this will help to correctly calculate the required amount of materials.

It is important to remember that to ensure the stability of the swing, you need to make the base at least 40-50 cm wider than the seat, so that there is a distance between the seat and the supports

The structure can be welded or secured with bolts. We recommend welding the parts because the bolts have sharp corners and it is advisable to further process them to prevent injury.

This is especially true for those owners of suburban areas who have small children. Also, the fastening with bolts will develop play over time.

We have figured out the connection method, now it’s time to start drawings. It is necessary to determine how many seats will be provided on the swing. The optimal option is 3. For a three-seater swing, a seat width of 150 - 160 cm will be sufficient. Then we add at least 40 cm of clearance between the seat and the supports - 20 cm on each side and get a swing width of 200 cm.

We weld the supports. They must be identical. To do this, we will take four pipes 300 cm long (50 cm pipes will be dug into the ground for the stability of the structure).

The contact angle of the pipes in the upper part is determined as follows: we place two pipes on the ground in a horizontal position in the form of a triangle. We spread the lower part of the pipes until the distance between the ends of the pipes is 230 cm. We measure the angle at the top between the pipes, this will be the best option for welding.

Once you have connected the top, you need to add a spacer in the middle of the part that protrudes above the ground. It turns out that if the length of the whole pipe is 300 cm, we subtract 50 cm for the recess, the outer part will be 250 cm. Somewhere at a height of 120 cm we weld the pipe to improve the reliability of the structure.

An example of a drawing of a swing with an A-shaped base. The diagram shows the dimensions of all structural parts, as well as the distance between the posts

Some craftsmen do not provide such a spacer, and their swing support resembles the letter L. But in order to protect yourself and your loved ones, we recommend that you do not neglect this detail.

After making two A-shaped elements, you can begin to connect them using a central crossbar, the length of which is 200 cm.

Option 2 - U-shaped base

This frame is also reliable. The only caveat is that the base must be concreted to a depth of at least 50 cm. Otherwise, the reliability of the structure will be in doubt. The advantage of such a frame is the minimum material used.

A swing with a U-shaped base will be a good solution when there is not a lot of free space in the garden.

To build such a structure you will need only three pipes or three profiles. Two side supports at least 230 cm long, so that 50 cm can be lowered into the ground and concreted. The horizontal crossbar for a three-seater swing must be at least 200 cm in length.

It is enough to weld two supports at an angle of 90° to the horizontal crossbar along the edges and the frame is ready. All that remains is to paint the metal to prevent corrosion.

Children under 6 years old

Children are lightweight, which allows you to create a swing that is simple in design. At the same time, do not forget about the correct level of security, which should be as high as possible. For such a swing, a pipe with a diameter of more than 50 mm is suitable. Before you begin assembly, you should take care to draw up a detailed drawing.

In this case, an L-shaped structure with a height of 1.5 to 2 m is quite appropriate. It is optimal if the swing is implemented in a portable version, which is achieved by welding a square base.

Next, a metal rod is used, which is bent so that it takes the shape of a hook. The length of such a segment should be about 1 m, taking into account the fact that about 50 cm of the rod will be underground. To ensure acceptable stability, it is enough to fix the swing at four points.

Seat design options

Once the structure support is ready, you can begin making the seat. Below we will talk about how to build the most popular options.

Option number 1 - classic

The optimal seat option is a metal frame covered with wooden slats. First you need to decide on the sizes.

Creating a comfortable and roomy seat is an important stage in making a swing. A swing seat in the shape of a wooden bench is an excellent option.

Let's say the seat width is 160 cm, the depth is 46 cm, and the back height is 52 cm. Let's figure out how to assemble a seat of this size.

The seat manufacturing process consists of the following steps:

We prepare the metal base . To do this, you need to use a grinder to cut three pieces of profile pipe 160 cm long, two pieces of pipe 52 cm long, and two pieces 46 cm each.
We connect the base elements. We form 2 pairs of side pipes. We connect the side support of the seat (46 cm) and the side support of the back (52 cm). To do this, we cut the ends of the profiles that will be welded at an angle of 45°. Then we connect them by welding. We do the same with the second pair of side pipes.
We form a metal frame . We weld three 160 cm long profile pipes to the edge of the seat, in the corner between the seat and the back, on the upper edge of the back.
Paint the base. In order to give a beautiful appearance to our product and protect it from corrosion, it is enough to cover it with paint.
We attach wooden beams . The bars should be chosen either 40x40 mm or 50x40 mm. Length – 160 cm. We install wooden crossbars in increments of 2 cm.
Painting or varnishing . To maintain the strength of the seat, the wooden beams should be varnished or painted. It is best to do this before installing it on the frame. It is enough to go over it with sandpaper of the appropriate grit, then paint it with the chosen coating.

Despite the right angle between the parts, the seat will be quite comfortable for users. Convenience is ensured by installing the seat at an angle.

The best option for covering the wooden parts of the seat is varnish. Varnished wood looks stylish and attractive because its unique structure and pattern remain

All that remains is to prepare the seat for mounting. To do this, you need to drill holes on four sides of the frame for mounting the hangers. Bolts with eye nuts will be inserted here.

Option number 2 - modern

If you want to add some flair to your garden swing, you can use regular pallets as the seat material.

In addition to saving time when making a seat from pallets, you also save money on materials. And even a novice home craftsman can handle making such a seat.

For work we will need: 2 pallets, beams, screws, screwdriver, jigsaw.

This seat is much easier to make than the previous version. Let's consider a method for making a classic seat from pallets in the form of a bench:

Choosing pallets. They must be free of damage, rot and cracks. In fact, there are several types of pallets, but for making a seat it is better to opt for Euro pallets.
We mount the lower part . To do this, cut the pallet in length. After all, with a seat depth of 80 cm, the swing will not be comfortable to use. We cut along the edge of the central lower jumper. The result will be a base for a seat 47 cm deep.
We make the back . Similarly, we cut off a part of the pallet 47 cm wide. Attach the backrest to the seat with self-tapping screws.
We form the armrests . Using a jigsaw, cut 2 pieces of a block 47 cm long, and two pieces 23 cm long. We connect pieces of different lengths in pairs at an angle of 90°.
We attach the armrests to the seat using long screws.
We paint or varnish the finished product.

We recommend assembling the seat with armrests. They are not a mandatory attribute of such a seat, but they give it a complete look and add convenience.

By the way, not only a swing seat can be assembled from pallets. A selection of furniture made from pallets can be found in this material.

Option number 3 - seat in the form of a bed

This is the simplest option, which requires the following materials: 2 pallets, 3 beams 160 cm long, self-tapping screws, a screwdriver, paint or varnish, sandpaper.

The manufacturing process involves joining pallets with the wide side facing each other. This is done using 3 bars that are attached to the bottom of the pallets, two at the edges, one in the center.

We connect the beams to the pallets using self-tapping screws. Next, we go over the surface of the pallet with sandpaper to remove small irregularities. The last stage is varnishing or painting.

For convenience, all that remains is to add a few touches in the form of pillows and blankets and a cozy place for relaxation is ready

Design

Before you start designing, it is advisable to decide on the type of frame, which can be folding/prefabricated (using bolts and nuts) or welded. If we talk about the first type, the assembly principle is to make parts of the appropriate length and calculate the correct pipe diameter for the bolts and nuts.

The welded structure is stronger and more stable; welding equipment is required for its manufacture. If you do not want to make an original, but completely standard product, drawings are not needed; you can use a ready-made diagram on the Internet as a basis.

To draw a sketch of a swing, you will need to consider the following dimensions:

the seat height should be about 60 cm;
for a mobile structure, it is necessary to maintain a distance between the support posts along the edge of the seat from 16 to 42 cm, it all depends on the type of fastening (cable, chain).
square seat 55 cm;

Attaching the seat to the frame

It's time to start attaching the seat to the frame of the garden swing. There are two possible options: chains and ropes. The most reliable material is chains. The corresponding thickness of the metal section is 4 mm or 5 mm.

First you need to attach the chains to the 4 edges of the seat. We will do this using bolts and eye nuts. We attach carabiners to the ends of the chain. Next we connect the eye nuts with the carabiners. We attach chains to the top crossbar using rings welded to the central crossbar.

For rings, you should not choose too thin a material, since they will bear the main load. The minimum metal thickness for rings is 8 mm

Another reliable, but more complex way to install chains is to use hidden bearings on an additional center beam. Then we will need more materials, plus the design will become more complex. Often this mount is used on industrial children's swings.

To simplify the fastening method, it is enough to use a carabiner for fastenings. You need to drill a through hole in the central crossbar and secure the carabiner in this hole.

The method of attaching a rope or cable to the central beam is no different from the method of attaching chains. But, to attach them to the seat, it is enough to thread the ends through the drilled holes on the 4 edges of the seat and tie strong knots there.

Do-it-yourself swing for a summer house: photos and classification of products

Bright cocoon swing suspended from a tree branch

Helpful advice! To make the seat, you can use any available materials that may remain on the site after building a house or carrying out repair work.

For construction you can use:

bars;
plastic;
strong rope;
metal pipes;
old armchairs or chairs from which the legs must first be removed

A comfortable swing is suitable for sleeping in the fresh air or reading

Car owners can use old car tires. They will go well with flower beds made from the same material.

Classification of swings for a garden with your own hands

There are a large number of original and comfortable swings that can decorate the landscape of any summer cottage.

Conventionally, they can be divided into three large categories:

Mobile version of a swing with a metal base

Cozy swing located on the open terrace

Children's swing with a metal frame, painted in bright colors

Varieties and photos of swings in the country with your own hands

Swings can be classified according to other criteria. The following types of products are distinguished by type of design:

Hammock swing is a great option for relaxation and admiring nature

Note! Hammock products, subject to manufacturing technology, can withstand a weight load of up to 200 kg. single – products with various types of structures that do not require the installation of additional crossbars

This swing is characterized by a quick installation system and can be installed anywhere. A variety of materials are used for manufacturing;

Beautiful hanging swing in the garden of a private house

Cozy hanging swing made of fabric, created by yourself

Large family swing with metal frame

Building a sun canopy

The canopy over the swing is not a mandatory element of this structure. But this is a very good solution for protection from the scorching sun.

If you decide to add a canopy to your garden swing, you will need instructions on how to make it. The canopy is based on a metal rectangle with jumpers. It must be built based on the size of the swing frame.

We weld a rectangle from a profile 20x40 mm or 30x30 mm. The length and width should cover the dimensions of the swing. Add spacers for reliability. Two or three will be enough; we place them approximately every 70 cm. We attach the canopy frame to the base of the swing using a welding machine.

The top of the canopy can be covered with a polycarbonate sheet or a fabric cover can be sewn on it. It all depends on your preferences. In online stores you can purchase ready-made fabric waterproof awnings

In addition, it is very important to correctly combine the size of the swing and the size of the canopy. Some awnings are sold with a mosquito net attached. This is a very good solution for summer evenings .

Types of swings

Before installing a swing, you need to choose the appropriate option.

It depends:

from the general landscape;
depending on the size of the plot, too large models will not be suitable;
depending on seasonality, whether it is possible to leave them for the winter;
for children or adults.

Alternatively, you can install a swing in the form:

sofa;
hammock;
armchairs.

Mobile swings are made as hanging ones or from a prefabricated frame.

A small hanging swing can be made from strong rope and board Source tr.decorexpro.com

Conclusions and useful video on the topic

Many craftsmen take a creative approach to the process of making a garden swing from metal, adding elements that will make its use more comfortable:

Summarizing everything written above, we can say that making a garden swing from metal is a painstaking, but very interesting task. The main thing is to build a reliable frame, add a comfortable seat, and decorate the swing with pleasant textiles. We support the article with a useful thematic video and hope that by following our instructions, you will be able to make a swing that will delight you for decades!

Have you ever had to deal with installing a swing in your garden? Share your experience with our readers. Leave comments, add photos of homemade products - the communication block is located under the article.

Selection of profile pipe

To build swings welded from metal, corners, round pipes, and brands are used. But more often they choose profile pipes, since they, compared to other types of rolled metal, have the following advantages:

convenient form for work;
the walls form stiffening ribs, which increases strength;
resistance to mechanical damage.

Among the disadvantages it should be noted:

the complexity of bending, you can’t do without a special machine;
the need for high-quality corrosion protection.

Profiles of various shapes are used to manufacture swing elements:

Bent parts are made from oval pipes, such as seats, arches, armrests;
square and rectangular profiles are used for the manufacture of elements with heavy loads - racks and spacers;
auxiliary parts are made from flat pipes.