Master class: do-it-yourself soft headboard for a bed

The bed in the bedroom is not only the main piece of furniture, but also the main element of the interior, which focuses attention. In this case, the headboard is of great importance. A simple option is to buy a bed with a ready-made headboard, but at the same time, its design may not satisfy all the requirements of the owners. Do-it-yourself headboards, on the contrary, will help create the desired accent in accordance with the preferences of the room’s inhabitants.

The headboard is an important element of the bed, which can affect the entire interior of the bedroom as a whole.

Upholstered headboard - a new design for your bedroom

This element is made by hand if there is a desire to update the bed. The structure must be stationary, rigidly fixed, and ensure reliability and safety. If you are deciding how to make a headboard for a bed with your own hands, consider different upholstery options. The dimensions of the structure are determined in accordance with personal preferences. So, the headboard is made in two versions:

1. wider than the bed, and depending on the size of the room, the length of the protrusions on both sides can be significant or small;
2. the headboard matches the width of the bed.

The height can be any. The standard value of this parameter is 39 cm. However, in most cases this element is made taller. When decorating, different ideas are used, but the headboard of the bed must simultaneously fit into the interior of the room and be in harmony with the design of the piece of furniture. The determining criteria are:

• upholstery colors;
• presence/absence of a pattern;
• screed method.

All these points should be thought through before starting to manufacture the structure, since it is not always possible to change the headboard of the bed. This is the main reason why you need to consider options that can be easily repaired, because this part of the piece of furniture wears out quickly.

Coconut mattress cover - a way out

Everyone has probably heard about coconut filling in mattresses. This is what manufacturers most often use to stiffen the mattress. Sales consultants tirelessly repeat about the environmental friendliness, naturalness of coconut coir, its safety, hypoallergenicity, good ventilation and excellent orthopedic properties. To all of the above, we can add that coconut filler does not retain moisture and dust, and therefore is not a favorable habitat for harmful microorganisms. The material is quite durable and can withstand high loads. All this, of course, is possible, but under two conditions:

1. coconut filler must be of high quality;
2. All production conditions must be met. In particular, coconut fiber should not be treated with formaldehyde.

In terms of orthopedic properties, coconut filler probably has no competitors. The expensive cost of a coconut topper (from 3,000 rubles) is fully justified by the quality and ease of solving the problem of how to make a mattress hard.

Where can I place it?

Beds with soft headboards are often placed in niches or alcoves. In this case, the backrest becomes a high soundproofing shield, preventing the passage of waves both from the bedroom and from the outside. Art Nouveau headboards can play the role of a screen if the bed is located near a window or in the corner of the room. Such a screen or shield will create a safe and comfortable corner, protecting the sleeper from drafts, prying eyes and bright sunlight if the room is on the east or southeast side.

If the location of the room allows you to install the bed exclusively next to the door, which is not very good, then choose an English-style headboard with “ears” covering the bed from the sides. When installed in a corner or near a window, arched structures are suitable, they will smooth out the lines and beautifully limit the space of the sleeping place. In this case, the headboard can be wider than the bed, creating a massive and reliable screen.

What to do if you sleep rough?

The rigidity of the sleeping place and, as a result, the inconvenience during falling asleep and sleeping is a serious problem: no one wants to wake up as if they had not rested, but had been unloading cars all night, broken and with an aching back. It doesn't matter why it became difficult to sleep:

• you missed the mark when choosing a mattress (this happens more often than it seems);
• some time passed and the more or less comfortable mattress compacted, deformed and became harder or “bumpier”;
• you have lost weight or have problems with your spine;
• you have two single mattresses end-to-end on a large bed and this “joint” invariably ends up under you at night...

Replace the mattress you expected to sleep on for another 10 years? It’s expensive, and not very reasonable: what if you don’t get it right with the next one? It's a waste of money, my back still hurts - it's a shame! There is a solution: buy a mattress cover.

You might be interested to know what a topper or mattress pad is, their types

Master class headboard in the form of soft squares

It’s easiest to make a soft headboard with your own hands in the form of individual squares. Even a beginner can cope with this process.

The production of the backrest begins with measurements. The width of the product should correspond to the width of the bed or slightly exceed it. The height is determined taking into account individual preferences and the desired effect.

Let's consider the stages of creating a headboard from 18 squares, arranged in 3 rows of 6 pieces (the size of each depends on the dimensions of the finished canvas).

First you need to purchase a sheet of plywood of the required size, mark a 3x6 grid on it and cut it using a hand saw or electric jigsaw. Then divide the fabric into squares with a margin of 5-10 cm on each side. If foam rubber is used for filling, at this stage you need to cut it into pieces equal to plywood squares.

To assemble, a piece of fabric is laid face down on a flat surface, foam rubber is placed on top of it, and then a square of plywood follows. To prevent displacement during upholstery, it is recommended to glue the foam rubber to the plywood. Do not use staples as this will cause deformation of the filler.

Armed with a stapler, you need to carefully, without allowing the components to move, secure the edges of the fabric around the perimeter, forming folds at the corners.

If padding polyester or batting is used instead of foam rubber, plywood is immediately laid on the fabric and 3 sides are nailed with staples. Then the element is filled through the resulting pocket, trying to place most of it in the center. Finally, the open side is closed and the edge of the fabric is secured with staples.

According to the diagram, the remaining squares are made and, using construction adhesive, they are attached to a large sheet of plywood, placing the parts as close as possible so that gaps do not form.

The final stage is hanging on the surface, creating a soft bed wall.

How to attach it yourself?

You can attach the headboard in several ways:

• to the wall, which is located above the bed. You will need to screw two hinges with self-tapping screws to the back of the headboard. The element is hung on bolts;
• to the frame. This method involves drilling a pair of holes on the sides of the outer part of the bed frame. The headboard will be screwed through these holes using screws;
• You can also make the headboard as a free-standing structure. You can purchase ready-made wooden legs or build them yourself. The legs are screwed to the headboard, and the structure itself is installed between the bed and the wall.

Materials

You can design the headboard yourself using a variety of materials. There are many ideas for decorating it with wood. You can use smooth painted boards or knotty ones with minor processing. The main role is assigned to the harmonious combination with the overall interior of the room.

If you are decorating a room in the Baroque style, a headboard in the form of a fence will not suit you, and every person should understand this. Even if your bedroom has a simple interior, which includes a classic set from a furniture showroom, the picket fence described above will also be inappropriate.

Metal headboards are considered the old-timers of the bed kingdom. They are actively used in various interiors, because such material is suitable for a romantic bedroom, as well as for a strict Scandinavian setting.

Mosaic and stone can be used as an alternative material for the headboard. From them you can make interesting patterns with elements of sea pebbles, tiles and even glass pieces.

Textiles, like wood, are often used to decorate beds. The material can bring a cozy atmosphere to the room. A wide selection of materials allows you to realize even your wildest fantasies. For example, heavy velvet will be relevant for Rococo or Baroque, and golden satin will be suitable for an Empire room.

A leather headboard is a stylish option. Some people prefer the eco-leather option because it is more budget-friendly. Based on the embossing and coloring of the material, such headboards will harmoniously fit into any interior.

A laminate headboard looks good on the wall. Many people decide to decorate the space above the bed using this material. The headboard is original and stylish.

Advantages

Decorate the room
There are many ways to make a soft wall. You will need a little knowledge and skills, suitable tools, as well as high-quality materials and imagination. Soft walls have a number of advantages:

• a sophisticated look that gives the room originality;
• heat and sound insulation;
• can be used to accentuate any part of the room;
• soft panels are easy to install without preliminary preparation of walls;
• have a long service life;
• hide cracks and chips on the walls;
• They are quite easy to care for.

Interesting headboard solutions

The product can be decorated taking into account the original data. So, if the bed already has a headboard, it is restored, the old covering is removed, and the shape is changed if necessary. In this case, it is advisable to use buttons covered with the same material as the entire structure as decoration for the head of the bed.

If a piece of furniture did not previously have a headboard, you can create a structure of any shape. For example, a product made from scraps and pillows looks attractive. If you have the skills to work with wood, you can create a figured headboard for a bed. Another way to make this piece of furniture attractive is photo printing.

We advise you to study - Repairing the roof of a private house - therapy for the roof

From pillows

This option will not look solid, because there will be leaks in the structure. The main elements are small pillows. You can sew them yourself or make them to order.

A frame is used to fasten soft structural elements. It is made from bars of the required length with a section of 50x50 mm. It is recommended to paint the frame in a tone that will fit into the overall scheme of the interior. The pillows are connected to each other at four points. The design will look neater if you sew soft elements only in the corner areas.

Soft from rags

For work you will need 2 sheets of plywood. The end result will be something like a quilted headboard. One sheet of plywood needs to be cut according to the size of the existing scraps. The second will act as the basis of the structure. To get a soft headboard, cut pieces of plywood need to be combined with foam rubber. For this, an adhesive composition is used. Pieces of material are pulled on top. They are glued along the edges on the back side and additionally secured with a furniture stapler.

Then the products are fixed to the frame in the form of a sheet of plywood. Self-tapping screws, nails or glue can be used for this. The latter option is preferable, since it allows you to obtain a structure without visible defects.

Quilted using the carriage tie technique

This is the name of an ancient method of decorating pieces of furniture and vehicles (carriages). It is still in use today. The design is based on a sheet of plywood or MDF. For upholstery, it is better to use a material that looks expensive: velvet, velor, leather. Classic carriage pattern: squares, diamonds. If desired, you can create a different pattern or ornament. For this purpose, fastening elements with small caps should be used.

In addition to the set of tools, a crochet hook is prepared. With its help, a cord will be drawn through the holes on the sheet. Buttons should match the trim. If you couldn’t match them by color, you can cover them yourself using upholstery material. Buttons must have an eyelet. Instructions:

1. Foam rubber is cut out according to the dimensions of the plywood sheet. Holes are made in it with the required pitch, which is determined from a previously drawn up sketch.
2. The holes are cut with a sharp knife or a hardened metal tube.
3. The filler blank is applied to a sheet of plywood and the markings are transferred to it.
4. Drill holes.
5. The headboard is covered with fabric using the previously described technology.
6. Pieces of lace (15 cm long) are attached to the buttons. To secure them you will need a crochet hook.
7. To cover the headrests with buttons, you need to constantly check the distance between them using a ruler.
8. The laces are fixed on the back side using a furniture stapler.

Filler

A soft headboard implies the presence of filler. Previously, in the manufacture of such structures that can be found in old solid oak products, foam rubber and batting were used. Today, the choice of fillers is much wider; it depends on the manufacturer and cost of the bed. You should choose a filler based on your preferences:

In modern production, molded polyurethane foam is often used when making a bed from solid wood. The bottom line is that the filler is molded to fit the headboard blank, which makes this option clearly tailored to the dimensions of the frame. Replacing such a molded part will be problematic, and DIY repair is not recommended.

For those who like to tinker and repair with their own hands, it is often recommended to use batting, padding polyester and foam rubber. These materials are cheap, but their shelf life is significantly shorter than that of more modern solutions. In addition, if the litter is of poor quality, it can become a breeding ground for dust mites and trap excess moisture.

Mattress cover made of struttofiber

Struttofiber is an inexpensive, hypoallergenic filler. It is made entirely from artificial raw materials or with the addition of natural seaweed fibers, wool, cotton or the same coconut. No adhesives are used in the production of strutto. Compared to a coconut mattress topper, a struttofiber topper is less rigid and is not designed for a very large person’s weight. The affordable price makes this product popular and in demand.

Subtleties of reupholstery

Many people decide to reupholster their headboard to give it a more attractive look. The most popular type is the carriage tie, which has been known since the 18th century. Previously, such trim was featured on carriages, hence the name. Today, this method is used in the design of furniture, as well as other decorative elements. The second name for the upholstery is capitonne.

To make the result of your work look impressive, you need to cover the headboard with expensive and rich material that will look good with a large number of folds. Such materials include velor and suede. Many people decide to cover their headboard with leather.

To carry out the reupholstery, you should prepare the following set of tools:

• furniture board or plywood, which will be used as a base;
• high quality fabric. You should purchase material with a margin of 30 cm more than the length and width of the plywood;
• foam rubber, the thickness of which is 5 cm. It should also be adjusted to the parameters of the selected plywood;
• padding polyester;
• buttons covered with fabric. They must have an ear;

• drill;
• knife;
• crochet hook;
• glue;
• laces. You can use rope or twine. Select the thickness taking into account the diameter of the button eye;
• stapler for furniture;
• wall fastenings and screws.

Subtleties of constriction:

• For such activities, you should choose a plywood sheet in the shape of a rectangle. If you wish, you can cut out the original shape that you like best;
• cutting of foam rubber is carried out based on the dimensions of the plywood itself. You will need to mark the material, indicating the area where the buttons will be attached. Most often, buttons are placed in a checkerboard pattern. Using a sharp knife, make button holes in the foam sheet;
• It is very convenient to make holes using a metal tube heated over a fire. You need to heat the pipe on a gas burner and quickly make holes. In one approach you can get about 2-3 holes. Do not forget to place a piece of board under the material so as not to damage the floor surface;
• Now you can put the material on the plywood and use a pencil to mark the places for the holes and make them with a drill. Use an 8mm wood drill bit;

We advise you to study - Which foundation is better for a house made of timber

• the next step will be to glue the foam rubber to the plywood, taking into account that the holes for the buttons in both sheets are identical;
• On top you need to place one layer of padding polyester. Don't forget to leave a 5cm seam allowance for each side. The fabric is placed on the padding polyester, the supply of which is 10 cm on each side. Once you complete these steps, you can turn the future headboard over and secure the fabric to the plywood using a stapler;
• At this stage you can start preparing the buttons. You can reupholster them with textiles yourself or give them to the craftsmen. Thread a string through the eye of each button. Use laces that are at least 15 cm long and tie them in a knot. A crochet hook will be needed to thread the lace through the plywood;

• feel the hook on the fabric side. Use a ruler to measure the distance to a nearby button and make a small hole. You can use nail scissors for this purpose. Using a hook, pick up a button with a lace and thread them through the hole;
• the lace must be taut and properly attached with staples to the back;
• The last step is to secure and mount the headboard to the wall. For this purpose you will need self-tapping screws.

Back using carriage screed technique

A carriage screed is the most beautiful way to decorate the head of a bed. This technique was used several centuries ago, and still does not lose its relevance. This decoration option is suitable for bedrooms designed in classical styles: baroque, rococo, renaissance.

The pattern itself on the carriage screed can be made in the form of squares and diamonds. To fasten the ornament, rivets or buttons covered with fabric are used. You can also use beads and crystals.

Materials and tools

To make a carriage screed we will need the following tools:

• drill;
• sharp knife;
• Crochet hook;
• scissors;
• furniture stapler.

Prepare the following materials:

• lumber for the headboard (furniture board, plywood, chipboard);
• foam rubber (you should make an allowance of 30 cm on the sides);
• padding polyester;
• buttons (pre-covered with textiles);
• universal glue;
• strong lace or rope (thick enough to fit into the eye of the needle);
• wall fastenings and screws.

How to do it?

Now you can proceed to the manufacture and assembly of the headboard:

1. We take prepared lumber (in our case, a plywood sheet) and give it a shape (it can be rectangular or even fancy).
2. We cut the foam rubber to the size of the headboard (do not forget about the allowances).
3. We mark on the foam the places where the buttons are attached, for example, in a checkerboard pattern.
4. Using a sharp knife, we make holes in the foam rubber for the buttons.
5. We place the foam rubber on the plywood and use a pencil to mark the places where the buttons will be attached.
6. We drill holes in the plywood with a drill.
7. Now you need to glue the foam rubber to the lumber, carefully making sure that the holes match everywhere.
8. We lay a small layer of synthetic padding on top. We make an allowance of 5 cm on each side.
9. We lay the prepared fabric on top, with an allowance of 10 cm on each side.
10. We turn the plywood over and fasten the textiles to the headboard with a furniture stapler.
11. Now we take the buttons and thread a rope 15 cm long through them. In total, you will need about 60 buttons.
12. Take a crochet hook and thread it through the prepared hole in the plywood. We feel for the hook in the front of the fabric and make a small hole with nail scissors.
13. We hook the rope with the button and thread it through the hole.
14. We pull the cord and firmly attach it with a stapler on the back side.
15. We fasten all the fasteners using self-tapping screws and hang the soft headboard on the wall.

Headboard options

If you decide to purchase a bed with an upholstered headboard, then it is worth exploring a wide selection of models, each of which will have its own advantages.

With some design solutions you can find a bed with a curved headboard. In this case, it can act as a separate element of the interior, separating the sleeping area from the window or wall. Such headboards can significantly exceed the width of the bed, separating not only the bed, but also the bedside tables. The task of such a large-scale interior element is to combine all the items of the bed into a single ensemble.

Another option that lovers of comfortable rest will certainly appreciate are beds with an adjustable headboard. They are comfortable, soft, beautiful, they are part of the body of the product and can take different angles, which allows you to take the most comfortable position. There are models with mechanics and electric drive. The backrest becomes vertical and can be fixed in a “reclining” or horizontal position. A very convenient option if you are used to watching TV or reading in bed.

Mattress protector – to soften the hardness of the mattress and more

First of all, decide what kind of mattress pad you need: a cover or a topper. The cover is placed on the mattress; the topper is a thin and light version of the mattress with a height of 2 to 8 cm, which is laid on top of the base one. There are models of covers to level the surface and ensure softness; toppers also come with soft filling, and a smooth surface is guaranteed, since almost all models keep their shape.

Both options:

• will cost you much less than a new mattress, even if the cover or topper is “dead” and needs to be replaced;
• “mobile” – easy to remove if necessary;
• protect the base mattress from wear, dirt, and absorption of odors;
• truly high-quality models are water-repellent: even if you don’t have small children or unpredictable pets, you may love coffee in bed or be thirsty in the morning and always have a glass of water on your nightstand. How long does it take to spill on the bed when you're asleep? With a good mattress protector, your expensive mattress is safe;
• you can wash and air it - you can’t wash the mattress, but dragging it out into the yard (in a private house) and onto the balcony (in an apartment) is inconvenient, it’s so hefty. And then, not everyone lives in cottages and not everyone has a balcony!

And yet the case is a “light version”. If the mattress has already turned into an instrument of torture and in the morning you feel like a young revolutionary from a strange old novel who slept on nails (but he is for the idea, and why should you suffer?!) - a cover is unlikely to save you.

Important! Covers filled with down, wool or fillings made from synthetic non-woven fibers - struttofiber or holofiber - can give the mattress softness, but do not have orthopedic properties.

The topper, in addition to the above, has other advantages:

• a soft, high-quality topper is easy to roll and weighs little - that is, you can take it with you on trips and even use it outdoors;
• if necessary, it will serve as an additional sleeping place for the guest - it will be comfortable to sleep even on the floor;
• You can use the topper as a gymnastics mat or as a comfortable place for children to play on the floor.

DIY wooden headboard

This style is great for a classic bedroom design. Here's how to make a DIY headboard for a queen size double bed. Measure the frame brackets and determine how tall the headboard is needed. It will be at least a meter. Trim the wood on a miter saw and sand the edges and all sides (especially the faces). Then measure and cut each board into 60 cm pieces, making 12 pieces in total. Sand all edges and surfaces by hand using fine-grit sandpaper. In general, this is the beginning, how to proceed further, read the instructions on the author’s website, he was not lazy and described everything in great detail. For clarity, view the step-by-step photos of the master class below in the gallery.

Photo source: www.instructables.com/id/Bedroom-Headboard-Queen-Size/

Beautiful wooden headboard

The idea for this project came from a need for a headboard and a strong desire to not spend a fortune on a piece of wood from a typical furniture store.

Probably many will agree that a finished project using recycled wood can be no worse than one made from new boards. How to make a beautiful wooden headboard, see the step-by-step photos below.

Photo source: www.instructables.com/id/Rustic-Pallet-Headboard-queen-Size/

Wooden headboard with lighting

A stylish headboard can make a bedroom feel cozier, or at least much better than just a bare wall. And the bed will become an attractive piece of furniture and help define the design of the room. Headboards have their own history; in the old days, headboards were used to provide warmth. They were typically made of wood, often carved with intricate designs. Taller and more ornate headboards became a symbol of status and wealth. Today things are simpler, headboards hold the mattress in place, keep our pillows from falling off and rubbing against the walls, and provide a comfortable place to support pillows for reading or eating breakfast in bed if you so desire. As for the design, many people prefer a simple rustic, or as they call “farm” style, such as you see in this example. You can read how to do this in the instructions on the author’s website.

High wooden headboard

If you prefer a simple style, here's an example of how to make a tall board headboard with your own hands. In this case, the structure is assembled without a frame; the boards are simply nailed to the wall. Not very practical, but simple and reliable, only if you do not plan to make a rearrangement in the near future. A short instruction on how to prepare and secure the boards can be found on the website. Although the idea is clear even without a step-by-step guide. The work is not difficult, but the effect is obvious; your bedroom will look completely different.

Photo source: www.furnishhome.ru/article-1893-derevyannoe-izgolove-dlya-krovati-svoimi-rukami.html

Wooden headboard for single bed

Just an example of how to make a wooden headboard for a semi-tray bed with your own hands.

Instructions and a list of materials can be found on the website, link under the gallery. Below in the gallery there is a master class with step-by-step photos.

Photo source: www.instructables.com/id/Beetle-Kill-Pine-Headboard-and-Frame/

Key points when choosing a headboard

The main parameters when choosing a headboard are appearance and comfort. For those who spend a lot of time in bed reading books and watching movies, a soft headboard is more suitable.

Taking into account the fact that people will often lean on the headboard of the bed, you should choose upholstery fabric that will be easy to care for (wear-resistant artificial or natural leather would be the best material).

We advise you to study - Which heating radiators are better depending on the heating system and requirements

The hard back option is suitable for those for whom the design of the product is more important than comfort and functionality (for example, it is very uncomfortable to lean on a wrought-iron headboard and place a pillow on it). Here you can experiment with the shape of the backrest, taking into account the interior and concept of the bedroom. Suitable materials include wood, metal, and plastic profiles.

Regarding the choice of headboard fabric, you should pay attention to the following nuances:

1. the backrest made of the selected fabric should fit into the interior of the bedroom;
2. It is desirable that the fabric be wear-resistant and care for it does not bring inconvenience;
3. When choosing textiles with large patterns (flowers, geometric shapes) in bright colors, it is recommended to limit the interior to only these prints, so as not to overload the appearance of the room.

Having considered the following styles of room interiors, you can decide on the appearance of the headboard for the bed, which will harmoniously fit into the bedroom, create coziness and determine the necessary accents:

The classic style assumes the correct geometric shape of the furniture. Pastel, calm shades combine with the color of wood. Often, for a classic-style bedroom, wooden headboards or rich options with carriage stitch are chosen.

Design techniques

A high headboard is regarded by designers as an excellent opportunity to add individuality to the interior. They use non-standard shapes, bright upholstery, decorative trim, and even install built-in lighting elements. A bed with a high headboard can be a structure that reaches the ceiling in height. At the same time, soft elements will create a single composition with the overall interior design and set the dynamics.

If you need to combine a decorative and functional surface in a small room, then a headboard for a bed with shelves will be an excellent solution. This option is suitable for both a children's room and an adult's or couple's bedroom.

When choosing a design option, it is worth remembering that such products often require a high-quality approach to the arrangement of the interior as a whole. Otherwise, the original bed with a headboard will look alien without the support of other interior elements. By choosing a bed with a designer upholstered headboard, you will make it the central element of the room, which will set the tone for the rest of the interior.

Which lifting mechanism to choose?

All lift beds can be classified by the type of lift they use. And it could be:

• manual mechanical;
• spring;
• or on gas shock absorbers.

For making your own bed with a lifting headboard, the best option is, of course, a manual lift without any additional equipment. The remaining two types are still difficult to install with your own hands. Especially if you lack experience and relevant skills. But you should understand that to operate the manual mechanism you will have to make some effort, so it is not suitable for children's beds, only for adults - one and a half or double. But the manual mechanism is reliable, strong and durable, and this is important.

To make such a bed yourself, you will still need to purchase a manual mechanical lifting device at a furniture store or order it online. Some people decide to make their own lift, but here, in addition to knowledge, skills and experience, you will need professional tools and even equipment, so few manage to do everything efficiently.

The finished mechanism is fastened in the following order:

• first, the top strip of the device is mounted (to the base of the box, the sheathing of the sleeping plane);
• then (for fastening reliability) a bar made of rolled angles is installed;
• then the next two slats are assembled, allowing you to control the height of the grate;
• then the lower (support) bar of the mechanism is attached to the main box, facilitating the sliding of the hinge supports;
• As soon as the installation of the device is completed, you need to carefully check all fasteners for their strength and reliability.

It will take an untrained person several months to make a bed equipped with a lifting headboard with his own hands. Therefore, everyone decides for himself whether to engage in large-scale applied creativity or limit himself to creating a beautiful headboard for a finished bed (perhaps already equipped with a lifting mechanism), choosing from the mass of ideas the closest in spirit and strength.

( 60 votes, average: 5.00 out of 5)

Related Posts

• Shower cabins - types, characteristics, assembly rules

• Do-it-yourself mosquito net for the window

Upholstered headboard with a pattern of nail heads

Materials and tools:

• plywood sheet;
• a piece of thick fabric (canvas for paintings was used in this project);
• nails;
• glue (spray glue was used in the project);
• padding polyester or batting;
• scissors;
• furniture stapler.

Progress

Cut a rectangle of the desired size from a sheet of plywood.

Place 3-4 layers of batting or padding polyester, leaving a margin of 10 cm on the sides.

Using spray adhesive, glue the first layer of batting to the plywood, then subsequent layers to the previous one.

Staple the batting to the back, keeping the material taut.

Turn the headboard right side out. Spray the surface of the batting with spray adhesive and, starting on one side, carefully roll the fabric onto the batting. Press and smooth the fabric well so that there are no bubbles, folds or distortions.

After the glue has dried, attach the canvas to the back of the plywood. Stretch the fabric well, wrap it around the frame and secure it with a furniture stapler.

Using nails you can make any ornament, including one imitating a carriage tie. For this headboard, we made a neat thin frame around the perimeter. To make one, mark two points with a pencil in adjacent corners at equal distances from the sides.

Drive the nails in there, but not all the way, but so that they stick out above the surface. Tie the string around the head of one nail, pull it tight and tie it around the second. So we made a straight line so as not to draw on light fabric with a pencil.

Then use a pencil along the line to mark places to drive in nails at equal distances from each other. Make small marks that will overlap the nail head.

Hammer the nails. Instead of nails, you can use furniture tacks.

Attach the headboard to the wall using fasteners.

How to sew a cover for the headboard

This work can be done from any material: fabric, leather, leatherette, suede, etc. During the sewing process, you should make an allowance of a couple of centimeters on all sides (based on the thickness of the filler). Thanks to this, you can easily put the cover on a pre-designed or existing headboard. It is necessary to sew from the wrong side.

As for the filler (sintepon or foam rubber), it can be added after putting on the cover. A case decorated with decorative stitches, buttons, buttons and other decors looks very nice. But for this you must have the appropriate sewing technique in order to make a beautiful and original cover for the head of the bed. In any case, there are no restrictions here, except for the flight of your design thoughts.