Installing a washing machine in the dressing room is an advantageous option that will allow you to carry out all manipulations with laundry in one room. This design will appeal to many housewives who want to rid all other rooms of this device. In order to understand whether it is possible to place a washing machine in the dressing room or not, you need to familiarize yourself with all the nuances of the procedure.
Most often, this option is widespread if the apartment is small enough. Then you can easily organize a separate room. But there are several main nuances here:
- Under no circumstances should the dressing room be located above the living space.
- It is possible to connect all communications.
- The redevelopment has already been approved by the relevant authorities.
Advantages and disadvantages
When considering the issue of installing a washing machine in the dressing room, people are faced with doubts and prejudices, the pros and cons of the idea. It is worth highlighting the main advantages of this solution:
- Such a design will free up extra space in the bathroom or kitchen.
- Installing the device in a storage room saves time, because you can sort through, store and rinse clothes in one room. Here the washed items are hung on hangers and dried.
- The washing machine can be installed in a special cabinet with a spacious lower compartment. This will complement the design of the dressing room and save space.
Despite significant advantages, this layout option has its disadvantages:
- During installation of the machine, owners may encounter technical difficulties. This includes the availability of outlets, ventilation and suitable space.
- A large washing machine in a dressing room can damage the floor covering, so it is better to install it on concrete tiles.
- If the dressing room is located at a large distance from the sewer pipe, there may be a problem with pumping out soapy and dirty water.
Installing a washing machine in a storage room is an original and profitable idea. However, before implementing it, it is worth weighing all the pros and cons in order to avoid unpleasant consequences.
Interior design ideas
It is worth paying special attention to mirrors - they will come in handy not only in a cramped dressing room, but also in a spacious room. A full-length mirror is useful when changing clothes; in addition, it visually expands the space and increases the amount of light.
The photo shows a large mirror that is mounted on the inside of the movable door, which makes it mobile and easy to use.
Another useful device is installing an ironing board in the dressing room. To do this you will need lighting, an outlet and a place for an iron.
Sometimes a dressing room in a closet becomes not only a storage place for things, but also a place for privacy, where you can put yourself in order, choose the right look, get ready for the work day or, conversely, for relaxation. This is why people all over the world value their cozy corners so much and try to furnish them with taste.
The photo shows a folding ironing board built into the wardrobe system.
Sources
- https://Trizio.ru/dizayn-kladovki-v-kvartire-70-foto-910
- https://design-homes.ru/komnaty/drugie-komnaty/kladovka-v-kvartire
- https://manrule.ru/kladovaya/malenkaya/
- https://stroy-podskazka.ru/kladovka/obustrojstvo/
- https://oboiman.ru/inside/garderobnaa-komnata-svoimi-rukami-iz-kladovki-61-foto-kak-sdelat-garderobnuu-v-4-kv-m.html
- https://design-homes.ru/komnaty/drugie-komnaty/garderobnaya-iz-kladovki
Design Features
Before installing the equipment, you need to inspect the selected room and determine the most advantageous place for washing. Owners should consider the following points in such cases:
- You shouldn’t immediately gouge the walls to identify a new outlet. Initially, it is worth assessing the chosen location for compliance with the protruding elements, height and width.
- In addition to the main size of the device, it is worth retreating about 10 cm, since hoses will be located on the back side of it.
- When a place has been allocated, you will need to check the strength of the floor. If the apartment is old and the flooring leaves much to be desired, it is better to fill the allocated space with concrete or lay tiles on it. Wooden pop can cause the body to collapse. The floor structure must support up to 90 kg of weight.
- If the floor in the apartment is uneven, then there is no need to worry. You can adjust the stability of the equipment using a building level.
- It is also worth choosing a place that is located near a sewer pipe. If it is located at a distance of more than 3 meters from the washing machine, dirty water will be difficult to drain, which will lead to subsequent breakdowns.
- Before installation, you need to inspect the hose from the washing machine. Usually it has a length of up to 1.5 m. If this size is not enough, it is worth changing the hose to a longer one.
Once all the parts are prepared, you can begin the installation process.
Washing machine connection options
The washing machine should be installed closer to sewer drains and water pipes. Therefore, the ideal option is to place it against the wall of the bathroom, supplying water directly through it. If the distance to communications is large, use long hoses, avoiding connections. Otherwise, leaks will be inevitable.
You can organize the water supply in one of the following ways:
- If the pipe is metal, the connection is made using a release coupling, which is attached to a pipe with a drilled hole. A 3/4 ball valve for the hose is screwed onto it.
- The connection to a metal-plastic pipe can be made using a fitting. The cutting area should be sealed with a rubber band, then a tap should be placed on the fitting, and a hose on it.
A tee between the mixer and the water supply is another option for connecting the machine.
Tee in the bathroom between the machine mixer. The position of the electrical outlet is also a point that should be taken into account: it is better if it is placed next to the machine. If it is not there, you should consider installing it. The use of an extension cord is not advisable due to the dangerous proximity of water.
Installation of equipment
Before starting the process, you should prepare for the fact that owners will face additional material costs. Their level depends on the characteristics of the room and equipment. What does the preparatory process look like:
- The first step is to provide the necessary ventilation for the dressing room. Constant washing causes dampness, which leads to the formation of fungus and mold. Constant air circulation will solve problems and eliminate unnecessary inconvenience. Many residents skip this point and hope for a constantly open door. However, this brings constant inconvenience and leads to air pressure.
- Now you need to think about connecting the equipment to the water supply and sewer pipes. Previously, the procedure was carried out using special taps and rubber hoses. Today, such techniques are already outdated. Because the drain and inlet hoses are already installed in the equipment.
- When installing adapters, it is better to rely on the shut-off valve. It allows you to shut off the water after the end of the cycle and during repair work.
- Now you need to cut a special recess to install the tee. Tools for work are selected depending on the material of the main pipe.
- Next, connect the equipment to the sewer. Here residents may encounter difficulties, so if they do not have the proper experience, it is better to contact an experienced master.
- Now comes the turn of the sockets. They are rarely found in the dressing room. Therefore, they must be done near the washing machine. If there is an old outlet in the room, it is better to replace it. Sufficient power is required for stable operation of the equipment. Old sockets will not be able to provide this. This will lead to equipment failure or fire. It is worth noting that connecting equipment to the network using extension cords is prohibited. It is best to provide direct access to the network.
- To install the socket, you should focus on parts with a moisture-resistant housing; they are characterized by a long service life and reliability.
- They make a place for the electrical network at the same level as the washing machine. Before starting the process, you will need to turn off the power supply to the apartment.
- Now you can make the markup. The optimal distance is up to 100 cm from the floor. You need to mark the measurements using a simple pencil.
- Next, you need to determine what size wiring is needed to lay the path from the equipment to the junction box. It is better to measure out the extra 30 cm in case of repairs or changes in design.
- Select a drill attachment suitable for a specific wall and drill holes. If you don’t have a variety of attachments at home, it is recommended to use the standard one. All actions are performed using a respirator and gloves.
- Next, based on the markings provided, you need to drill a small hole for the future outlet.
- Using a grinder, make a 4 cm groove.
- Thoroughly clean the resulting holes from dust and dirt, fix the socket box in the hole made.
- Place the wire under it. One end of it will need to be connected to the shield, and the other to a drilled hole in the wall.
- To make the structure invisible, it is masked using plaster or putty. It is imperative to wait until the mixture hardens.
- Now you can insert the socket itself and connect the wires.
When connecting wires, it is better to use terminals that will help make the procedure safe. When testing the outlet, you should listen to the smell. If there is no haze or burning, then everything was done correctly.
How to connect the car correctly
The main “headache” is how to hide the hoses and tubes. If there is a kitchen or bathroom behind the wall near the SM, there will be no problems. But, if the washing machine is installed on the opposite side, how to connect it so that nothing interferes?
There is only one way out - to hide communications in the floor. But this is already the task of the repairman. We will tell you about the classic connection method:
- Buy extended hoses for draining and taking water. Avoid docking, otherwise the risk of leaks will be high. It is advisable not to use hoses longer than 3 m.
Important! By extending the hose, if it breaks, you are unlikely to submit the SMA for repair under warranty.
- When connecting the drain, you need to use a siphon or direct the hose directly into the sewer. We have already written about how to connect a washing machine to the sewer.
- When connecting to a water supply, you can go in three ways:
If you have a separate water pipe outlet in the wall, you can connect the drain hose there through a tap.
After connecting the “water” communications, take care of the electricity. The closer the outlet is to the car, the better. If there is no suitable outlet nearby, see the page “How to properly connect your machine to the power supply.”
Let's summarize: a washing machine is rarely placed in the hallway, but if you plan everything correctly and connect the device correctly, no difficulties are foreseen.
Ensuring stable ventilation
After installing the socket and connecting the machine to the sewer, you can safely wash your clothes. However, if the dressing room is not large in size and does not have windows, you should think about normal ventilation in the room. Otherwise, mold and a damp smell will appear in it, which will appear on hanging clothes. To organize ventilation, the following measures are taken:
- Make a small hole between the floors and a door.
- Install a special door containing bars.
- Make holes in the walls, which are kept at a distance of up to 30 cm from the floor covering. According to user reviews, this is one of the most reliable options.
- Make a hole in the floor. A similar method is used in private houses with a basement floor.
Normally, the dressing room should be regularly ventilated and there should be good air circulation. The integrity of the clothes, their smell and the degree of contamination depend on this. It would be a good idea to organize an exhaust duct. It is made using a special grille, which is installed right under the ceiling.
If the dressing room is large, it is better to make several similar channels, which will be located at a decent distance from each other.
Decorating the storage room
We have already found out whether it is possible to install household appliances in a cramped room. True, there is little free space here, and it is not recommended to clutter it further. Containers placed on hanging shelves are used for storing washing powders and other laundry products.
As follows from user reviews, this solution allows you to save at least thirty percent of usable space. Illumination in the room is best done from spotlights, placing them on the central part of the ceiling. As you can see, even such a small room as a pantry can bring significant benefits.
Installing a machine mount
During washing, the equipment produces strong vibrations and shocks, which put strong pressure on the floor. Because of this, it is not recommended to install the device on wooden or weak floors. To get out of this situation, you can use the following constructions:
- Using a special mat with an anti-vibration function. It helps reduce the percentage of pressure on the floor and protect the washing machine from damage.
- Installation of a massive concrete slab. Such a design will take time, however, it can reduce the level of vibrations during washing. It is worth remembering that concrete coating will not correct problems with the floor and will not make it smoother.
- Construction of an installation elevated above the floor. To do this, you will need to cut 4 holes in the floor, insert metal pipes into them and cover them with a durable plywood sheet. This design reduces the amount of vibration, but quickly becomes unsuitable for use.
When all the details are prepared, you can safely use the washing machine installed in the dressing room.
