Fiberboards initially have an inconspicuous appearance and color, but treatment with acrylic paints and varnishes wonderfully transforms them and gives the material delightful decorative qualities. Painted MDF is the best choice for people who prefer to implement fashion trends in room decoration and change their life in an original way.
Advantages of MDF facades:
- are not subject to deformation under the influence of steam and moisture
- withstand temperature changes
- facades are easy to maintain
Coloring: Ral, Woodcolor, CS.
Facade base: MDF thickness 10, 16, 19, 22 mm
Manufacturing instructions
In order to make painted MDF facades at home, you need to prepare materials such as car or acrylic paint, primer, putty, sandpaper, solvent and laundry soap.
Step-by-step progress of work
- To accurately make painted MDF facades in the kitchen, they must be dismantled by removing them from their hinges and freeing them from their fasteners. This should be done to make it easier to reach all areas with bends.
- Using masking tape, you should seal all decorative elements that do not need painting so that paint or primer does not get on them.
- Then you need to thoroughly wash the MDF surfaces with a soapy solution and wipe with a solvent to remove grease, soot and dirt.
- After this, you need to sand all the irregularities with sandpaper and determine the presence of cracks and depressions. If there are any, it is necessary to fill the surface with a special acrylic putty until completely leveled.
- Next, you need to saturate the facades with primer and let them dry. This process is recommended to save paint and provide better coverage. It is advisable to apply the primer in 2 layers. Each subsequent layer is applied only after the surface has completely dried.
- Cover the surface with the first coat of paint. If it is in aerosol form, you should direct the stream at a distance of 20 cm, and make sure that the paint applies evenly and does not form large drops. During work, it is recommended to wear a respirator or mask, as well as goggles to avoid exposure to harmful substances. When applying paint with a brush, you must ensure that the movements are in the same direction.
- After the paint has dried, it is recommended to sand the surface again with sandpaper. This is necessary for the next uniform coating and interaction of the layers with each other.
- The next step is to apply paint to the surface again. This process can be repeated an arbitrary number of times until the desired effect is achieved.
- At the request of the master, you can coat the surface with varnish. It must be remembered that after each staining, pauses should be made to allow the materials to dry completely.
- The final stage is the installation of painted facades with the remaining pieces of furniture and installation of furniture in the kitchen.
To prepare the surface, it is recommended to use a grinder - manual processing will take a lot of time and will not give the desired result.
Experienced craftsmen coat the panels with two layers of primer - the first will stop further absorption of the composition, and the second will ensure high-quality adhesion
A perfect glossy finish can only be achieved with a spray - when using a brush it is impossible to avoid visible lint marks
MDF kitchens: photos in the interior
We present to your attention a selection of various kitchens made from MDF.
Conclusion
As you can see, kitchens made from painted MDF have many more advantages. And with proper planning and careful operation, shortcomings may not appear. But the furniture will serve you for many years, never ceasing to please you and lift your spirits.
Read also the article “MDF enamel kitchens: painted facades.”
Gallery
Did you like the article? Subscribe to our Yandex.Zen channel
Great article 0
