How to make an ordinary wardrobe from a sliding wardrobe?

Often there is a need to update the internal organization of a wardrobe. In this case, you can always add new shelves to the sections, and install rails for drawers or wire baskets in place of the shelves. Or remove all the shelves from the section and install a clothes rail in their place. Or vice versa, remove the clothes rail, filling the space with shelves or other elements. Methods for internal redevelopment of a wardrobe are limited only by the owner’s imagination.

One of the most popular wardrobe remodels is updating the facade. Bored doors can be replaced with new ones, made of any material. For example, replace the facade with a mirror one. You can also experiment to your heart's content with the mirror itself. Make an old mirror matte, decorate it with a sandblasted pattern, paint it with stained glass paints, stick on a translucent film with a pattern or decorative stickers.

LiveInternetLiveInternet

– Quote book

: “...In 1985, after two operations, I was discharged from the Moscow Oncology Clinic and sent back.
Warm summer and spring days have only one drawback - nasty insects that...

We all age with time, but who said that in addition to age we should receive a bouquet of bo.

1 kg carrots 1 tsp salt 3 tbsp. l. granulated sugar 1 head of garlic 2 tsp coriander 1/2 cup.

The beneficial properties of patchouli oil have been known for a long time. In India it was used to flavor linen.

-Music

–Search by diary

-Statistics

Paint

Paint will be a real lifesaver in furniture restoration. Before applying paint, sand the surface and coat with primer.

You can simply paint the cabinet in 1-2 colors, or you can paint a real picture on it. If painting is not enough for you, you can create a sketch using a stencil. Geometric stripes and shapes can be easily created using masking tape - it will serve as an even border for the paint. And for the most complex ornaments and pictures, the stencil will have to be created specially.

We talked about methods of transferring images to surfaces here: “Happiness is drawn on walls.” And the link given to us contains detailed {instructions} for using stencils: “Experience: paint a wall using a stencil.”

Which wardrobe is suitable for a dressing room?

A new dressing room can be converted from an old wardrobe. Before you start disassembling old furniture, you need to decide on the size of the future dressing room.

It is necessary to decide where the clothing department will be located. You can free up space by combining several cabinets into one. We consider a neat wardrobe, sideboards, and bookshelves as additional materials for landscaping. All fasteners and accessories can be purchased in the store. Also suitable for furniture sets: gypsum board, chipboard, wood.

Cover with film

A film on a self-adhesive base will help hide all the imperfections of cabinet doors or dresser drawers in a couple of simple steps. The range of films is huge, you can choose one color or with a fascinating pattern, golden or imitating wood. Do not forget to degrease the surface before application, or even better, sand it and cover it with a layer of primer.

Transforming an old wardrobe into a dressing room

To transform an old furniture set into a new storage area, you will need tools and skillful hands.

Initially, we remove all shelves, doors, rods, and clothes hangers. All that remains is the frame for the future dressing room.
Next, we follow the previously prepared drawing and install partitions to create the interior space of the furniture set. Partitions can be made of gypsum board or chipboard.
In each section, we mark with a marker the places for future shelves, hangers, and rods.
An important stage is the installation of doors. Doors can be made sliding, mirrored, or done without them at all. It is best to hire a professional for installation.
The final stage is filling the closet with things and accessories.

You can do without drastic changes; with a little ingenuity and available materials, you can change the appearance of an old wardrobe.

Tips on how to decorate your dressing room:

Cover with self-adhesive film, fortunately in construction stores, you can choose any color and pattern that suits your interior. And the old closet will take on a new life.
Wallpaper. This option allows your imagination to run wild. A huge selection of matte, glossy, embossed, photo wallpapers for every taste. Before gluing it is necessary to treat the surface.
Cover with fabric. This option is ideal for a child's room. The fabric is attached using a construction stapler or glue.
The old “old fashioned” way is to paint it. You can simply paint it in several colors or use stencils and your own imagination to create a picture.

To make a dressing room with your own hands you need a little time and imagination. New life for old pieces of furniture will save space in the house and make a woman’s dream come true.

Cover with fabric (A collection of different and interacting tissues form organs)

This method looks more smooth and textured than wallpaper. Tissue (A collection of different and interacting tissues form organs)

It is better to cover large elements such as wardrobe doors, strengthen them with a furniture stapler or with glue.
It is interesting to choose leatherette as a fabric (the structure of tissues of living organisms is studied by the science of histology)
.

Fabrics (The structure of tissues of living organisms is studied by the science of histology)

, decorated from pieces using the patchwork technique, will make your closet more comfortable and will help you fit it into a child’s room or into styles such as Provence and country. The style can be embodied with wallpaper or film if you cover the panels of the drawers with materials with different patterns.

How to remodel a wardrobe in a compartment

How to make a full-fledged wardrobe from an ordinary wardrobe with hinged doors? This question is asked, no doubt, by many who still have a closet at home, perhaps from Soviet times. And in fact, the cabinet is good, strong, especially since they don’t make them like that anymore. It would seem that there is nothing complicated about it, order sliding doors, replace the hinged facades with them and use them. Actually, that’s the way it is, you just need to take into account some nuances, make some efforts and redo some things.

The first, and most important thing, is that installing sliding doors requires 80 mm of free space in the closet (Fig. 2).

You can get this space in two ways:

You just need to remove the facades, disassemble the cabinet, cut off all internal shelves and racks by 80 - 100 mm, assemble the cabinet, order and install sliding doors (Fig. 3). This option saves money, but eats up space inside the cabinet, as well as nerves and a lot of time for the home craftsman.

Figure 3 Figure 3 Figure 3 Figure 3

This method automatically turns the closet into a built-in one, but also makes it possible to increase its height by adding a mezzanine. It is necessary to remove the facades, add two racks and a roof, at least 80 mm deep than the cabinet itself (Fig. 4) and insert sliding doors.

Figure 4 Figure 4 Figure 4 Figure 4

To save money, you can add not full-fledged parts, but false panels (depending on the location of the cabinet (Fig. 5).

Figure 5 Figure 5 Figure 5 Figure 5

The second is the presence of drawers (drawers).

Drawers in the closet complicate the process of transformation from a closet to a sliding wardrobe. Due to the overlap of the doors getting into the drawers, the drawers may not slide out. And also in view of the fact that in old cabinets the facade is the load-bearing part of the drawer, when remodeling it will be necessary to modernize the drawers or make new ones.

Change color

The easiest and fastest way to refresh furniture is painting. The options for working with color are endless.

You can make your closet monochromatic by choosing a deep, rich palette;
The combination of drawers highlighted in bright colors with a calm shade of the frame looks interesting;
An unusual move is a gradient fill. Transitions can be left smooth or separated by contrasting stripes;
Multi-colored stripes, drips, splashes and, of course, the author's painting always look original and emphasize the artistic taste of the owner.
Chalkboard paint will not only help hide the aged surface of the cabinet, but will also add a playful mood and creativity to the entire interior.

At the preparatory stage you will have to get rid of the old coating. Use sandpaper to remove cracked varnish and paint. The surface is washed, dried, degreased, and primed. For a dense color, paint is applied in 2-3 layers. To preserve the effect of antiquity, on the contrary, the coating is made slightly uneven, as if slightly faded with time. Secure the work with several layers of clear varnish.

How to make a wardrobe from an old wardrobe

The question of whether and how to make a wardrobe out of an old wardrobe is a question many people are asking today. And this is quite understandable - there is still a good and strong wardrobe, which for some reason you don’t want to get rid of, and why not try to give this favorite piece of home furniture a more modern look. There is a short answer to the first part of the question - you can make a wardrobe out of a wardrobe! And how to convert a swing wardrobe into a compartment will be discussed below.

How to make a sliding wardrobe from a hinged wardrobe

It would seem that there’s nothing complicated about it, order doors equipped with rollers, replace the hinged facades with them and that’s it. Actually, that’s the way it is, you just need to take into account three main nuances and, with some effort, change something.

The first , and also the main thing, is that to install tracks and sliding doors you will need 80 mm of free space in the closet. You can get this space in two ways:

Trim. You just need to remove the fronts, disassemble the cabinet, trim all internal shelves and racks by 80–100 mm, assemble the cabinet, order the selected system and install its parts and assembled sliding doors. This option saves money, but eats up space inside the cabinet, as well as nerves and a lot of time for the home craftsman.
Build up. This method automatically turns the closet into a built-in one, but also makes it possible to increase its height by adding a mezzanine. You need to remove the facades, add two racks, a bottom and a roof, at least 80 mm deep than the cabinet itself, and, having installed the lower and upper tracks, insert the sliding doors themselves. To save money, you can add not full-fledged parts, but false panels (depending on the location of the cabinet).

The second is the presence of drawers. The presence of drawers complicates the process of converting a cabinet with hinged doors into a wardrobe. Due to the overlap of the sliding doors entering the working space of the drawers, the process of pulling out the latter is almost impossible. And also, in view of the fact that in old cabinets the facade is the load-bearing part of the drawer, when remodeling it will be necessary to modernize or make new drawers.

Well, the third thing is the width of the cabinet and the number of compartments. Old cabinets are mostly three-leaf with a width of 1500–1800 mm, and for this size two sliding doors are enough. Therefore, the overlap of the doors ends up in one of the cabinet compartments, which makes access to it more difficult. An equal number of doors and compartments eliminates this problem, but increases the cost of the entire project.

To summarize the above, it should be added that you can make a sliding wardrobe from an old wardrobe with your own hands by ordering the required parts (tracks) of the system and facades on casters in advance from the nearest furniture-making workshop. By the way, you can also get recommendations and advice on the process of remodeling your old cabinet.

Wallpaper

Wallpaper offers more options than film, as it comes in matte, textured and completely suited to any taste. If desired, you can choose photo wallpaper that will visually expand the space. Wallpaper is applied using PVA; the surface must be prepared in advance for the best adhesion. You can decorate with wallpaper not only the front doors, but also the internal shelves or the back wall of a cabinet or shelving unit.

Cutting the bottom and top plates

For this work, a Metabo circular saw and a hand saw for particularly difficult areas were used. Unlike the jigsaw, there were no chips left on the laminated surface of the chipboard. I sawed the bottom slab without removing the plinths, and the top slab on a stool. It is recommended to cover the cut areas with trim tape to protect them from moisture. Dust and sawdust flew around, so we worked with smoke breaks to ventilate the room. If you have a workshop or a vacuum cleaner to connect to the saw, this will be a big plus - dust from chipboard is harmful, cleaning sawdust from the floor is still a pleasure.

After cutting three horizontal slabs, I marked and drilled holes for connection to the wall. To do this, I simply placed the scrap to the edge and drew marks with a pencil along the old holes. I used a 5x70 countersink drill

On-site fitting was not successful. I did not take into account that the balcony has the shape of an irregular rectangle or, more simply, a trapezoid. The width of the far side is less than the calculated one. The most correct thing was to disassemble the structure and cut it again in the same places, shortening the future cabinet by another 5 cm.

Results

Any old wardrobe can be remade, giving it a new life. You will need a little time, tools and skill. To assemble a cabinet cabinet without doors on the balcony it took me about 4 hours with a lunch break. If you take your time, carefully measure all the details and think about every step, you can make furniture that is indistinguishable from the factory one. I’ll tell you another important fact: the house is nine floors, and on each balcony there is an emergency hatch leading to the neighbor below. So we opened it and found that the neighbor had covered his balcony and the opening was closed. In theory, you can break through it and climb down if necessary. But now there is a closet there and even with all the desire there is no such possibility. What do you think about this issue?

Make old

Almost all styles, for example, shabby chic, Provence and vintage, are furnished with artificially aged furniture. Therefore, if your closet is ugly old, you can make it beautifully old. We discussed the methods in this post, choose the most suitable one: “Aging techniques: an overview”

Create mirrored doors

Mirrors not only expand the space and add light to the room, but also hide surface imperfections. Any closet can be transformed into a mirrored one if you attach one full-height or several small mirrors to its doors. This technique will help in designing an Art Deco style cabinet.

Another option is a mirror mosaic, which will create magical reflections.

Installation on the balcony

Reassembly went faster, I already understood the procedure:

We place the lower platform on its side closer to the window and screw the vertical partition from below.
We lift it into working position and fasten the right side panel.
We move everything to the opposite side from the window, a space appears on the left, now we can screw on the second side panel.
We install the structure in the place where it will ultimately stand.
Screw on the horizontal partition.
We install the top plate.
We insert shelves into the left side of the cabinet.
We measure the width of the right side, cut off the remaining chipboard sheets to make additional shelves. We install them on metal shelf holders.
For better stability of the cabinet in each compartment, we fix one of the shelves with screws (optional).
The new closet without doors and back wall is ready, let's put things away.

Note: I made the holes for the shelf supports with a 5 mm drill, but I still had to hammer them in with a hammer. To ensure that the shelf lay flat, I used a square and drew a line with a pencil. Unfortunately, it is not always possible to take into account the nuances. The chipboard from which two additional shelves were cut was crooked and therefore lay slightly askew. The saying “measure twice, cut once” comes into play here. Initially, the cutting of the material was carried out correctly, but the second time the eye became blurred and the ceiling turned out to be equal to the rest of the horizontal slabs. It was not possible to drill holes for Con, “screw tie”) - a single-element tie for connecting parts made of wood materials (chipboard, MDF, plywood, solid wood and others). I didn't want to take apart the closet for the third time. The solution is simple - secure the upper part with metal furniture corners. They were also used to strengthen two shelves in the middle of the cabinet.

Glue the rivets

To create an aggressive effect for loft or steam punk, cabinet doors can be decorated with metal rivets or staples. Nails with decorative heads are also suitable. Let the chest of drawers look like an ancient chest, and the wardrobe look like a door to a submarine. Other iron fittings can be used for design, and the style can be supported by painting or covering with fabric (A collection of different and interacting tissues form organs)

Preparatory stage

Before you start disassembling the furniture, prepare a container in which all fastening elements (corners, screws) will be stored - this will allow you to avoid an unpleasant incident in the form of missing parts during subsequent installation, and it will also be a good idea to write down all the operations performed step by step.

The first step is to remove things, pull-out shelves and drawers from the closet.

If there are mirrors or glass surfaces on the facades, care must be taken to ensure their safety during movement or transportation.

Add size

If you want to achieve a traditional look for your cabinet, you just need to glue wood slats or stucco molding, and then paint it - and the effect will be created. You can glue an inscription cut out of wood with words that are important to you or the title of the contents of the box.

The volumetric texture can be made with colored sawdust or other similar material: the door is covered with glue, and the sawdust is inflated from above, and then everything is fixed with spray varnish. Please note that such a surface is very difficult to clean.

Don’t forget that the fittings have a huge impact on the appearance of the furniture. In any case, it’s worth changing the handles, and maybe that will be completely enough. Lighting can also revive the usual look of a cabinet or shelving unit.

Create a slate surface

Chalkboards are all the rage at the moment, so why not create one from cabinet doors? The slate effect can be easily achieved using two methods: purchase film or paint the chest of drawers with chalkboard effect paint.

Replacement of accessories

Profiles for the box are divided into horizontal upper, lower and vertical handle profiles. It is better to take aluminum fittings; they will last longer and are sold in a wide range of colors. We select the number of guide strips according to the number of doors.

We take the rollers based on the mounting option: at the top (symmetrical) or at the bottom (asymmetrical). Each door requires a set of a pair of rollers. They are equipped with an adjustment screw and a pressure spring, which are installed in the lower profile.

The door stopper is installed in the lower guide for proper fixation of the frame.

Decorate with mosaic

It is very easy to create a mosaic from broken tiles with your own hands. The article “Creativity from leftover tiles” has complete instructions for action. Such a wardrobe or chest of drawers will look especially luxurious in Mediterranean styles. You can also purchase ready-made mosaics in blocks.

Dismantling the frame

The next step is to disassemble the cabinet frame. It is most convenient to carry out this procedure by moving the wardrobe to a horizontal position.

For greater stability, cabinet furniture is sometimes attached to the wall; in this case, before removing the back wall, it is necessary to disconnect the cabinet from the load-bearing wall.

If the wall is attached to the cabinet partitions and the back of the shelves, then it is dismantled first.
If the wall is fixed in the grooves of the side walls, floor and roof of the cabinet, then the frame is first disassembled.

What can you do with an old wardrobe: remodeling a wardrobe