To fully assemble the Fortuna wardrobe, it is better to have instructions, this will make it easier to navigate both the sequence and the details of the cabinet. The instruction diagram is presented on this page of the site, see below.
When choosing a cabinet for your home, you need to pay attention to two of its properties: spaciousness and compactness. Many furniture manufacturers offer different types of furniture for storing things. The Fortune wardrobe has a reputation as one of the most popular on the Russian market.
For information, the “Fortuna” cabinet model is a complete analogue of the “Maestro” model. Link to instructions.
About the manufacturer
The furniture factory "Interior-Center", located in the city of Penza, produces high-quality cabinet furniture. Buyers value the factory’s products based on a number of parameters:
- Excellent design solutions of all types.
- Constantly updating collections.
- Compliance of materials with quality standards.
- Use of modern fittings.
- Affordable prices.
Sliding wardrobes are one of the main directions of the Interior Center factory. They are sold throughout Russia; there are company representative offices in major cities. The factory has received a large number of professional awards.
Description of the wardrobe Fortuna
Sliding wardrobes will fit perfectly into any interior. They are roomy and compact due to the sliding door mechanism.
Accommodation
- bedrooms;
- hallways;
- children's rooms;
- loggias.
The cabinet is entirely made of laminated chipboard, including the front doors. The cabinet dimensions are shown in the table.
Color spectrum
- Bleached oak is ideal for bright rooms, a common shade that can be combined with other furniture.
- Light ash with a warm shade, looks good in children's rooms and hallways.
- Dark ash with a calm, warm hue.
Chipboard color: wenge, dark shimo ash. The color combinations look bright.
Sliding wardrobe Fortuna four doors. The main advantages of the model, according to the manufacturer, are:
- decent quality;
- low cost.
The side doors are decorated with beveled mirrors. This model is popular in the market.
Internal filling
Inside the Fortuna wardrobe is divided into three vertical sections. The side sections are identical; they include an upper shelf for storing scarves, hats, linen and other things, as well as horizontal rods for hanging clothes. The height of the model allows you to store long coats and raincoats without worrying about them getting wrinkled.
The middle section includes four spacious shelves, as well as three lower drawers. They are designed for storing linen and hosiery products. The standard depth of 600 millimeters allows you to arrange all your things compactly.
There are no lower shelves for storing shoes.
Cabinet cost
This model is sold in many stores in Russia. The Fortune wardrobe is rated by the manufacturer as affordable. Its cost ranges from 9,000 to 13,000 rubles. As a rule, this amount includes delivery to the entrance. Additional charges:
- Climbing to the floor
- Assembly (10% of the cost of the cabinet, some stores charge up to 1000 rubles for the service).
Assembly
You can assemble the “Fortune” cabinet yourself. It comes with accessible instructions with detailed descriptions. For assembly you will need:
- Screwdriver.
- Hammer and nails.
- Roulette.
- Level.
- Screwdrivers.
Assembly is carried out in four stages, it takes
Stage 1. The model body is assembled. This work is done on the floor. The wardrobe is assembled lying down. The plank and cabinet walls are attached to the bottom, then the inner walls, mezzanine shelves and lid. Particular attention is paid to marking the drawer guides.
Stage 2. The drawers are assembled and the guides are attached. The cabinet is placed vertically.
Stage 3. Using nails and a hammer, the fiberboard walls are nailed to the back. Now the cabinet body can be put back in place. All that remains is to place shelves, clothes rails, and ready-to-assemble drawers.
Stage 4. The last stage is hanging the doors. This is done carefully, markings are made first.
If the owner of the cabinet doubts whether he can assemble it, it is better to seek help from professionals.
Advantages and disadvantages
According to customer reviews, the Fortuna wardrobe has both advantages and disadvantages. Among the positive qualities are:
- Capacity of the model.
- Design of facade and mirror with facet.
- Low cost in relation to characteristics.
- Color of the body and facades.
Speaking about the advantages, we must not forget about the disadvantages. And they are:
- The difficulty of self-assembly without experience, which especially applies to hanging sliding doors.
- Drawers can only be pulled out when the outer doors are fully open.
- Average quality of sliding mechanisms.
The Fortuna wardrobe is suitable for those who want to store their clothes while saving significant money. Decent appearance and acceptable quality are the distinctive features of the Fortuna wardrobe.
Assembling a sliding wardrobe Fortuna Sport video
10 months back
Video instructions for assembling the “Fortune” cabinet: https://dekonte.ru/spalnja/shkafy-i-tumby/shkaf-fortuna We are on social networks: https://t.me/dekonte…
1 year ago
Sliding wardrobe Fortuna, step-by-step video instructions.
9 months back
Complete step-by-step assembly of a maestro sliding wardrobe with explanations, Manufacturer - furniture company BTS (BTS)
3 weeks back
Wardrobe "Fortuna" white: https://dekonte.ru/shkaf-fortuna-bely.
4 years ago
The video is in fragments, since grandma was very disturbing - I apologize! Do-it-yourself wardrobe door repair begins...
3 years ago
Furniture assembly: combined wardrobe HK 02.94. Wardrobe "Fortune". We fasten the running profile and the guide profile.
10 months back
Video instructions for assembling the “Coupe” wardrobe: https://dekonte.ru/spalnja/shkafy-i-tumby/kupe-s-zerkalom We are on social networks: https://t.me/dekonte…
10 months back
Sliding wardrobe “Fortune”: https://dekonte.ru/shkaf-fortuna We are on social networks: https://t.me/dekonte https://vk.com/mebel_dekonte …
1 year ago
Modern design and stylish execution distinguish the Fortuna wardrobe from other representatives of the family...
1 year ago
In this video, we will look in detail at the procedure for assembling a wardrobe at home, using the example of a wardrobe…
9 months back
Modern design and stylish execution distinguish the Fortuna wardrobe from other representatives of the family...
3 years ago
The video shows the Favorite sliding wardrobe Belford Oak Dimensions (H*W*D, mm) 2100*1700*578 Weight 158 Body material laminated chipboard…
1 year ago
Assembly of a sliding wardrobe 1000 - 1800 x 600 x 2400 (Vlabi) https://www.hanimebel.com.ua - Our online store https://www.facebook.com/hanimebel - Facebook.
2 years ago
Important !!! Dear subscribers and viewers of the channel, I have created a new channel dedicated to furniture assembly, homemade...
11 months back
Review of the modern sliding wardrobe from the BTS factory. If you are planning to buy a wardrobe inexpensively, then check out our...
10 months back
Triumph furniture, hostel furniture and other offices, most likely clones of the same shit manufacturer...
6 months back
MORE INFORMATION ON THE SITE! — https://chonemuzhik.ru/kak-sobrat-shkaf-kupe-svoimi-rukami.html How to assemble a wardrobe with your own hands Service...
2 years ago
Uglich Furniture Company UMKA. We have been producing furniture since 2006. Today I will show you how to assemble...
1 year ago
Find additional details on the main DEZALT website https://www.dezalt.ru/news/20170919190908/
9 months back
Do you want to buy an inexpensive wardrobe? Look at the photo and design of the Fortuna wardrobe. https://www.linetti.ru/Shkaf-kupe_Fortuna/ Hello...
sports-video.ru
Tools and materials
Among all types of clothing storage products, the leading place today is occupied by the wardrobe. It is multifunctional, spacious, comes in different shapes and sizes, and does not require additional space to open the doors. That is why most people, when choosing between a wardrobe and a sliding wardrobe, prefer the latter option.
Assembling a sliding wardrobe with your own hands in the video presented is not at all difficult - all you need to do is have the necessary tools in your apartment and be familiar with the design of the product. Often, when ordering a cabinet without the services of assemblers, the company sends a document that contains a drawing of the product. This also lists all the component parts, which are numbered in order. By looking at the drawing and comparing the elements of the cabinet, you can intuitively assemble the product.
To work according to the sliding wardrobe assembly diagram, you will need the following tools:
- building level - to check the levelness of the installation parallel to the floor;
- corner;
- rubber and regular hammer;
- straight and Phillips screwdriver;
- roulette;
- pencil and ruler;
- screwdriver;
- wood drill - to make holes;
- metal drill – for installing an aluminum base.
Additional tools for assembling furniture yourself include a jigsaw, drill and sandpaper. It is also necessary to prepare all the details of the cabinet, which means checking the diagram to ensure that the number of items matches. Pay attention to the fittings and mechanisms: if there are drawers in the closet, ball guides should be included.
Doors for the product are often supplied ready-made. They are pre-installed with rollers and a strip of soft material. The door must be installed in the final phase.
Step-by-step diagram for assembling a corner cabinet.
These instructions for installing a corner cabinet design with a swing door are universal. It is suitable for furniture manufacturers Shatura, Stolplit, Borovichi, Lazurit, Angstrem, Elba furniture and for the companies Mnogo Furniture, Hoff - selling goods from different factories.
In the step-by-step diagram - the assembly of a corner cabinet, changes can be made depending on the manufacturer, for example, the eccentric screed is replaced with confirmations, supplemented with shelves, decorative elements - pilasters and cornices.
Since the body of the corner cabinet is quite large, there are models equipped with a lighting device for the interior space; a unit is installed on a photocell and an LED lamp turns on when the door is opened.
But the entire assembly principle does not change; general technical aspects are reflected in our diagram.
The design of the cabinet parts is numbered.
The picture shows a general view, each part has its own number. Below we will consider the installation sequence point by point.
The first step is to install the fittings on the corner elements - the bottom and top of the cabinet.
On the part numbered 04, the bottom of the cabinet, screw in the rods of the eccentric coupler, insert dowels and locks. We attach the legs and support base. We also install fittings on the top panel 01.
Preparing the side panels.
The highest parts of the cabinet. We stuff the legs onto the bottom of the panels, screw in the rods, and insert dowels. On the side panel with number 07, the right side of the cabinet, we place the hinges. On the left 06 there are shelf holders.
Internal vertical panels.
On the panel with number 71 we install a connecting corner, locks and small rods for the top shelf. 61 the shelf holders are driven in and small rods are screwed in for the middle shelf.
Comments • 19
You don't explain it very clearly. Wasted my time. “These are the ships, this is there, we don’t know where.” The point was to record such a video.. Nonsense.
Olesya, if it’s completely unclear to you, maybe it’s better not to take on the task of assembling cabinets yourself? After this experience, we will think again whether it is worth spending the day off until the night to collect such things. It’s a pity that you wasted your 8 minutes watching this video + another 1 minute of time and energy to write a shitty comment.
How do you like the closet? Spacious?
Blat, I only came to this video because I can’t hang the doors - I don’t understand how to push the lower fasteners into the runners, and in the end they didn’t show it(
Instructions for assembling a wardrobe with your own hands.
Every apartment must have such a multifunctional piece of furniture as a wardrobe. It will save space in your home and organize space. Not everyone can afford to purchase it due to various circumstances. This is not a reason to refuse such a thing. For a jack of all trades, it won’t be too difficult to make and assemble it yourself.
Of course, some knowledge will be required. There is nothing complicated here as it seems at first glance. In addition, what joy and pride you will experience from the work done. After all, furniture assemblers charge quite a high fee, but you can handle it on your own.
After the decision to buy a wardrobe has been made, the need arises to assemble it correctly.
How to assemble a wardrobe “Fortune” yourself?
A wardrobe, as the main piece of furniture in any room, should have a number of positive qualities. The first and most important thing you need to pay attention to is spaciousness, dimensions and harmonious combination with the overall interior of the room. produces a popular wardrobe model called “Fortune”, which managed to show itself on the positive side. When purchasing this product, the question may arise: how to assemble a wardrobe of this type? Paying attention to the instructions presented below, this will not be difficult to do.
General rules for assembling cabinet furniture
To assemble purchased furniture, you must follow the cabinet assembly instructions provided by the manufacturer. There are certain rules. By following them, you will assemble any item with high quality and in a short time.
- You shouldn’t take everything out of the packages at once, much less mix parts from different packs. Maintain the order.
- Read the instructions carefully so that later there are no overlaps and you don’t have to redo it again.
- Make sure the fittings and components are in place. Otherwise, you will not be able to completely assemble the furniture. The handles must match the color scheme. It is necessary that the drawer guides have a soft movement.
- Assemble one section at a time in order. You need to start from the bottom, gradually moving to the sides.
- Open the package, lay out the parts, prepare the tools.
- Mirrors and glass are installed at the final stage. This way you will avoid damage.
For assembly you need a screwdriver, a screwdriver, a hex key, and a tape measure.
If you do the manufacturing yourself, it will be much easier to assemble.
It is very important to follow the assembly sequence, otherwise you will be forced to disassemble and reassemble the cabinet in the correct sequence.
Sliding wardrobe "Maestro": step-by-step assembly instructions
How to assemble a sliding wardrobe can be read in the “Instructions for assembling a sliding wardrobe”, which is included in the package. However, there are some details that require strict adherence. A sliding wardrobe is furniture that performs many functions; now such models have become very widespread.
Cabinet Features
Sliding wardrobe "Maestro"
Assembling the Maestro sliding wardrobe takes a little time and is not particularly difficult. Installing such a product for an adult man who has a little knowledge of the instrument is a matter of one or two hours. It is recommended to watch the video instructions first.
Parameters in millimeters:
- width 170 cm;
- height 222 cm;
- 60 cm deep.
Maestro cabinet parameters
Inside, the shelves are arranged functionally and thoughtfully. There are also mezzanine shelves. Cabinets are produced covered with a pleasant soft color (wenge or ash). The front of the cabinet can be Loreto or oak. White doors create an image of imposingness and sophistication. There are large format mirrors with special bevel processing.
Inside view of the cabinet
How to work with laminated chipboard - a popular material for cabinet furniture
Currently, laminated chipboard is mainly used in the production of furniture. This is the first principle. It is wood shavings of coarse dispersion. Using the hot pressing method, it is given the shape of a sheet. In the manufacture of slabs, formaldehyde resins are used; they are an additional component. The difference from simple chipboard is the coating with a film made of paper and melamine resin. In terms of environmental indicators, it is better to use materials of class E1. Laminated chipboard boards have good compaction, due to which furniture made from them is strong and has a long service life.
Fastening the rails to the cabinet door
If you think that this material has the same composition, then you are mistaken. Based on their coating, they are divided into veneered, rough and laminated. Based on their quality composition, they can be divided into three grades: first, they use first-class sawdust (usually wood of the same species). The surface is flawless, not a single chip. The plate is decorated, laminated with film or veneer. Second grade – you can already see small defects. There may or may not be cladding. Third, there are already noticeable defects here. Such slabs are not covered with anything.
Until the cabinet is fully assembled, make sure that the attached parts do not tilt, as the fasteners may break off.
In addition, laminated chipboards are moisture-resistant and fire-resistant (withstand high temperatures). They are mainly used to make furniture frames, but are also used in the production of partitions or used as interior decoration. It is worth mentioning that laminated chipboard, due to its composition, perfectly holds nails and screws.
In order to give rigidity to the wardrobe, it is necessary to secure the back wall.
The main “steps” for assembling sliding wardrobes with your own hands are indicated in the instructions.
Furniture made from these boards has many advantages compared to other materials.
- Acceptable price indicators.
- No difficulties in manufacturing.
- Good quality.
- Significant period of use.
- Variety of colors and decorations. This will help you choose the perfect furniture for your living room, kitchen or children's room.
- Blends perfectly with other materials.
Such furniture looks great in any interior.
Another important feature of laminated chipboard is that these boards have heat and sound insulation. Therefore, they can sheathe the walls of the room.
Make sure that the holes for the shelves and hanger rod mounts match the holes on the opposite rack.
Also, if you have started remodeling an apartment/house, knowing how to assemble a wardrobe yourself will help you easily and quickly resolve the issue of moving this furniture.
Stages of assembling a sliding wardrobe
Such furniture is assembled according to the “bottom up” principle. After all, the heavier a part of the structure, the more difficult it is to lift it for installation on other elements. The second rule is to assemble only vertically. Some experts recommend assembling the cabinet on the floor, and only then lifting and installing, but this method has many disadvantages:
- It is necessary to take into account the diagonal of the side wall: if it is equal to or greater than the height of the room, then it will not be possible to raise the compartment. The minimum difference is 5 cm.
- It is difficult to avoid distortions, because there is no way to identify them in a timely manner using a level.
- After lifting the structure, it is necessary to re-check and tighten all fasteners, getting rid of any play.
The only advantage of this method is that you can cope with the task without outside help. But vertical assembly is also easy to do alone if you know a few secrets and follow the instructions.
Assembling the lower part and frame
The first and most important stage of assembling the cabinet is the correct connection of the bottom elements. This part differs from the lid in the large number of holes, some of which may be through. Another difference is that there are places for fastenings on both planes of the workpiece. You can determine where the bottom side of the part is by looking at the cabinet diagram: the holes in the area of the partitions indicate that this is the top.
There are three options for the supports:
- legs;
- base;
- combined - a combination of the previous two.
Depending on what is provided for a particular coupe model, the mounting system may differ. The base is usually fixed using dowels and confirmations. In this case, wooden plugs are first driven into the footboard, then the part is connected to the bottom, and only after that the screws are screwed in.
Cabinet legs can also be attached in different ways. If fixation is provided using confirmations and self-tapping screws, then first you need to screw in the central fastener, and then additional ones. For models with a combined support, the legs are installed first, after which the base is installed.
Installing sidewalls and internal partitions
When the support is ready, the turn of the most labor-intensive process comes, which is difficult for a novice master to cope with alone. But there is a way out. Just take a closer look at the attachment points of the sidewalls to the bottom. If the walls are placed above the base plate, then assembly can begin according to the “edge to edge” principle. If on the sides, the direction of installation of partitions and sidewalls will be from the center to the edge.
Having decided on the order of connecting the elements, lay out two nearby (reference to the diagram) verticals and the corresponding shelves on the floor.
REFERENCE! If the furniture is of high quality, then it has a duplicate connection: dowels and confirmations or minifixes. This makes the cabinet more durable; its shelves do not break at the fixation points under the weight of things.
Next, the dowels are driven into the sidewalls of the shelves, with the help of which the verticals are then connected - a sidewall and a partition or two partitions. At this stage, it is important not to confuse the front and back ends. It's easy to distinguish: the front one has a decorative coating.
The resulting structure is lifted and placed on the bottom. The shelves serve as spacers to prevent the partitions from falling, so you can safely continue assembling the cabinet without outside help. Subsequent work is carried out according to the same principle: a dowel into the shelf, which is then placed on the partition and connected to the finished part of the structure.
The final stage is to achieve complete fit of the parts using a rubber hammer and control fixation of the fastening points with confirmations or minifixes.
Cabinet cover
This part can be attached to the walls from above or from the side. In the first case, it is recommended to insert connecting elements into the fastening points, then place the sheet upward and tighten the screws. The second option involves the reverse procedure: the cover is first installed in place and then secured with fasteners.
Before tightening the confirmations, you should use a tape measure to make sure that the cabinet frame is assembled correctly. To do this, measure both of its diagonals. If they are the same, then everything is fine. When one is larger than the other, there is a distortion that must be eliminated before fixing the lid. This is done simply: the cabinet is supported from the side of the slope, after which all the fastenings that are loose are tightened.
Back wall
Depending on the size of the compartment, its back side may consist of one or several sheets of fiberboard. In the first case, everything is a little simpler: the fiberboard is fixed in the corners of the cabinet, and then attached to all its elements.
If the furniture is large, then connecting strips are attached to the fiberboard sheets. In this case, it is recommended to assemble from the bottom up. The bottom sheets are attached first, which are then secured with a vertical bar. Then the top fiberboard and horizontal connector.
IMPORTANT! The strength of the cabinet depends on the correct installation of the rear wall. Therefore, you should not save nails - the sheet is nailed to all partitions and shelves of the compartment.
We fasten the guides
The lower rail consists of two grooves for the movement of the rollers, the upper one looks like a profile with a central divider. If they do not have holes for fastenings, then you will have to make them yourself. In the lower rail they are located in the center, in the upper - in a checkerboard pattern.
IMPORTANT! When drilling, do not forget about the chamfer, designed to deepen the screw head flush with the rest of the blade.
The top bar is placed so that its front part coincides with the front edge of the cabinet lid. When installing the lower edge of the compartment slab, an indent of 10–15 mm is made. This is necessary in order to avoid distortion and ensure smooth movement of the doors. One more thing: before installing the bottom guide, you need to insert stoppers into its grooves.
Fastening wardrobe doors
This is one of the simplest and at the same time important stages: often the door leaf is made of expensive and fragile materials. Before hanging the doors, the doors are unpacked and laid out to determine the order of their installation - it depends on the design. Then take the one that will be installed on the inner rail and insert it into the upper groove. After this, the wheel is pressed out and the door is fixed on the lower guide. Then the actions are repeated with the external ones and the assembly is completed.
Subscribe to our Social networks
Preparation before assembly
First you need to prepare the room. The final outcome of the case depends on this, how much time you spend on work. The important point is that nothing interferes. Make sure all materials and necessary tools are at hand.
As a depth limiter, you can use a 6 or 8 plastic dowel mounted on a drill.
With the help of a wardrobe, you will visually separate different zones in the room, for example, a working area from a relaxation area.
Assembling furniture at first glance seems simple. Many people make mistakes, resulting in defects: the doors and sashes do not fit together well, the doors can creak when opening, misalignment of the holes causes misalignment of parts, furniture does not stand securely on the floor. To avoid this, you must adhere to certain rules and instructions.
Built-in wardrobes of various models, made from natural and artificial materials, are very popular in interior design.
Some models of wardrobes can be transformed to suit the features of the room: the presence of a corridor, recesses in the wall where the wardrobe can be placed.
Main assembly steps
The wardrobe is assembled strictly according to the diagram, vertically or horizontally. The second option is better, this way you can prevent skewing of the parts being connected. If the height of the ceilings does not allow you to raise the finished cabinet, then it is better to carry out the work in a vertical position.
You can easily assemble a sliding wardrobe with your own hands if you follow the step-by-step instructions.
In such a closet you will place twice as much clothes without the expense of the enormity of the furniture itself.
The first step is to attach the base and adjustable legs to the bottom. They are necessary if the floor is uneven. Next, we begin assembling the body. We connect the sides to the base. To make the structure durable, we attach an intermediate rack and a shelf. This is necessary so that the sidewalls do not tilt. Then we screw the remaining parts and attach the lid. It is advisable not to nail the back wall, but to screw it with self-tapping screws. At this stage we put the cabinet in its place. We install guides for drawers, holders for shelves, and a bar for hangers. Check that the drawers should slide out smoothly.
You need to familiarize yourself with all the details of the product (so as not to confuse anything during the assembly process and not have to start all over again), prepare the tools and the place where the assembly and installation will take place.
This work will take a lot of your time.
Next up is door installation. First we attach the guides, then we fix the rail with screws. We insert the doors, check that they open and close smoothly. Adjust them if necessary. Lastly, glue on the sealing brushes. We attach plugs to the confirmation holes.
Do not warp the cabinet parts, keep the corners straight.
To summarize, we can say that assembling a wardrobe is not such a difficult job. Your desire, skill and ability will allow you to do this without difficulty.
After you do everything, be sure to check how the doors work (do they creak, move freely, etc.), how securely the shelves and other parts are fastened.
Be careful that until the cabinet body is assembled and the back wall is installed, all fasteners can be easily broken.
Cabinet assembly
As practice shows, assembling the Fortuna sliding wardrobe will take you no more than two hours. The instructions will help you cope with problems, so you can even assemble it yourself, without additional help. Remember that even experienced assemblers have a mandatory set of tools with them:
- hammer;
- screwdriver;
- nails;
- roulette;
- building level;
- screwdrivers.
The page contains photo and video files on how to assemble correctly and step by step. First of all, you should deal with the body. Remember that any wardrobe is assembled on the floor in a lying position. The bottom is laid, and then the plank is firmly attached to it. The walls must be attached evenly and firmly, without discrepancies or loosening. The walls inside the cabinet compartments are not only of decorative importance, but also influence the strength and service life of the product.
Each of the boxes should be assembled separately. Remember that the correct location of the guide beams will determine the use of the cabinet in everyday life.
Pull-out compartments should be free of obstacles, slide in smoothly and remain firmly in place. After these steps, the cabinet can be raised to a vertical position.
Fiberboard walls are installed using a hammer and nails, which are already included with the product. Once the body is assembled, the cabinet can be placed in the location chosen for it. The last stage remains - hanging the doors. The diagram provided by the manufacturer will not help you much in this matter, since you must mark and install the loops yourself. Fortunately, modern technology allows you to do this quickly and without much difficulty.
Installing any furniture is quite an interesting and not an easy task. The Fortuna sliding wardrobe, the simple assembly of which is presented on our website, will serve you for a long time, delighting your household. The main thing to remember is that all parts must be carefully tightened, leaving no weak spots. Otherwise, over time, the furniture will become loose, and reassembly will no longer bring such a high-quality result.
The Fortuna sliding wardrobe has a fairly large number of advantages. For example, users were able to note that it has a very large capacity, which harmoniously borders on the small size of the model. A wide range of color shades allows each person to choose the most suitable option, and the attractive price will not put too much of a strain on your pocket. This model is considered the best option for couples with small children.
