A computer chair is not as complicated to assemble as a car engine, but it is also not as obvious as it might seem at first glance. Small details have a significant effect on your comfort. So let's figure out what an office chair consists of:
- Headrest
- Back
- Upholstery
- Armrests
- Seat
- Filler
- Mechanisms
- Gas lifts
- Frame
- Cross
- Wheels
- Additional amenities
Headrest
Adjustable
The headrest reduces strain on the neck by adjusting the height.
You should take a serious approach to choosing it if you often lean back in your chair and take an almost reclining position. Otherwise, if the headrest is static
or absent, this is not a problem and will not affect your comfort.
Photos of computer chairs
<
>
Choosing the right chair is a responsible event. Not only your convenience, but also your health depends on it. Sitting for many hours in an incorrect position is the most common cause of the development of scoliosis, osteochondrosis and all diseases associated with congestion in the body. If you do not dream of varicose veins and swelling, then do not neglect the correct placement of your feet on the floor.
Back
There are rectangular, rounded, bifurcated, high and low. It is better to choose a suitable shape based on how you feel when you sit down on the chair. And also depending on how much time you spend sitting.
Form.
If you spend more than 5 hours in a sitting position, then over time your back gets tired, and your posture will begin to take on the Russian letter “C”, but should take on the Latin letter “S”.
Height.
A high back is important if you work at the computer for a long time, read or watch videos. After an hour of sitting with a low back, your back falls off and your attention wanders.
To choose the right backrest, it is important to understand that in the chair your back should not only relax, but at the same time be in good shape.
We offer chairs with all types of backrests. You can pay attention to the model with lumbar support - this is the optimal model for working in the office or at home in terms of price-quality ratio.
Orthopedic backrests provide the correct sitting posture for medical reasons. After them, any other chair will seem uncomfortable.
For example, South Korean Duorest models are unique in this regard. Only they offer a corset back support system. The Samurai model from the Russian brand “Metta” is the best offer in the mid-price category.
The unique adaptive backrest consists of segments that adapt to both the shape of the sitting person and his movements.
Upholstery
Textile.
Soft, flexible and inexpensive upholstery. It is worth remembering that the fabric of the fabric is different. Depending on the manufacturer, different qualities, weaves and combinations of fibers are used. The practicality of the material depends on this.
Eco leather.
Artificial leather on a fabric basis. Hypoallergenic, durable and pleasant to the touch. As with genuine leather, we do not recommend this upholstery if you have harmful cats. Although many pets perceive the chair as a good place to sleep instead of a scratching post. Everything is individual.
Genuine Leather.
Durable, status and expensive material. Does not wear out over time and retains its appearance for 10–15 years.
Net.
Advanced modern material. It allows air to pass through better than all of the above, does not deform and does not fade. Ideally adapts to the shape of the sitter's body, providing maximum comfort.
How to choose the right executive chair
When choosing a computer chair or a chair for your boss, you must follow the rules.
- Simple, laconic design.
- Calm color scheme.
- Durable and beautiful upholstery.
- Elastic filler.
- Availability of mechanisms for adjustment and swinging.
In the question of how to choose the best product from the presented assortment, personal feelings play an important role. First of all, you should test the model you like for comfort and fit.
- It’s easy to check that the height is correct; just sit down on the seat: the angle between the thigh and shin should be 90°.
- A gap of 5 cm is assumed between the knee bend and the seat.
- Preference should be given to models with an anatomically shaped backrest, complemented by a bolster in the lumbar area and a headrest.
- It’s a good idea to evaluate the smooth functioning of the mechanisms and rollers.
The executive chair combines technology, functionality, and aesthetics. It provides the opportunity to work in comfortable conditions, has an orthopedic effect, and emphasizes the status of the owner of the office.
Armrests
The shape can be curved, more geometric or suspended. Their task is to relieve stress from the arms, shoulders, upper trapezius and deltoids.
Static
armrests without adjustments and pads are a budget option that does not require you to spend more than 5 hours a day in the chair. Models with soft pads on the armrests will provide more comfort.
Adjustable
The height of the armrests is suitable for any height, because they can be adjusted to individual parameters. They will help you place your hands in a neutral position, when you don’t need to straighten your arms to reach the computer mouse or keyboard. If the width of the armrests can also be adjusted, we recommend adjusting the chair so that your elbows are under your shoulders.
Top gun and Deep Tilt: office rocking chairs
The centered tilt mechanism (aka DMS) is installed on comfortable and solid models of office clothing furniture. If you choose furniture yourself and can spend a little more on personal comfort, we recommend that you take a closer look at models with a top cannon device. A rocking chair with VHI is good for health and mood:
- the load on the intervertebral discs is reduced;
- swing - simple prevention of disorders in the spine and back;
- when rocking, stiff joints are warmed up, which improves the general condition of the body;
- swings calm your nerves and help you concentrate.
Compared to the described permanent contact and PVM designs, the top gun has greater customization options:
- height adjustment of the chair—the plate is no longer needed;
- Turn the top lever of the gun to the left or right, and you can fix the position of the chair or activate the rocking mode;
- Using the adjusting screw, the rigidity of the swing is adjusted taking into account the user’s weight.
The axis of the centered rocker mechanism is located directly in the center of the chair. Leaning back as far as possible, you lift your feet off the floor. A more convenient option is a multiblock with an offset axis: when swinging, your feet touch the floor.
An improved alternative to the top gun design is the Deep Tilt mechanism. Its functionality is the same as the DMS, but deeper rotation is possible thanks to a special lever. The chair can be locked in the working position. The advantage of Deep Tilt is its high degree of reliability. Install the Deep Tilt design on expensive and prestigious furniture models.
Seat
Sitting in a chair, 60% of a person’s weight presses on the seat, 25% on the back, 15% on the floor. At the same time, even distribution of weight is what should distinguish a high-quality comfortable chair. You should not be thrown back and forth or in any direction.
The rounded edge of the seat will not interfere with blood circulation in the legs and will relieve pressure on the vessels.
The seat should be positioned so that your feet are on the floor and not hanging down. Knees should be bent at 90 degrees
. Select the depth of the seat to match the length of your legs so that the edge does not put pressure on the popliteal fossae. For this purpose, most computer chairs are equipped with height adjustment to adapt to the height of a particular person.
Chairs that are too soft are not the best choice. You can slide in them, which puts pressure on the blood vessels. The anatomical seat with tightly stretched mesh adapts to the shape of the body and distributes pressure evenly.
Classification of computer chairs
Let's look at the main types of computer chairs:
- Operator's rooms. Usually these are the most budget options with a minimum of features. Don't expect a high level of comfort from such a chair. But, nevertheless, they also have fairly high performance. In any case, they are better than conventional chairs;
- "Director's" They are distinguished by a respectable appearance, a high back and complex adjustment mechanisms. Very comfortable chairs, but still you won’t forget that you’re at work. They often limit the range of backrest deflection. Such chairs cost very well;
- Gaming ones. The most comfortable and expensive. They are equipped with the most expensive swing mechanisms with a huge number of adjustments. Often even the armrests can be adjusted in all respects. The backrest must be high and can recline to a horizontal position. Outwardly, it resembles an oak leaf. This is caused by the presence of lateral support elements. The same ones can be on the sides of the seat. These chairs are most often equipped with additional “tricks” in the form of mug holders, tablet stands, removable cushions and the like;
<
>
- Orthopedic. They are distinguished by quite high rigidity. The backrest from the side resembles the letter Z. In the area of the lumbar region there is a significant inward deflection, which plays the role of a support bolster. The back is made medium (to the shoulder blades) or high (with support for the head). Most often they are covered with acrylic mesh;
- Children's. It is important to remember here that the stool should “grow” along with your baby. You will never be able to choose a universal model for all times. Preferably no armrests. In children, this habit can cause spinal curvature. Because most often they rely on only one of them. The child's feet must touch the floor so that the foot stands straight. In this case, take care of a cross with thrust bearings or a special footrest. Children rarely sit upright. Models with a headrest and lumbar bolster are preferable. Don't choose models that spin. This way you will save your mischief maker from the risk of serious injury.
Mechanisms
Responsible for tilting the back and seat.
Piastra
- the simplest mechanism. It only adjusts the height and is not very durable.
The most common mechanism used in office chairs is the “Top Gun” or, as it is also called, DMS. Everything in it is regulated by one handle, which is responsible for lifting and swinging. The rigidity is adjusted using a screw.
"Top Gun Lux"
or DMSL - an advanced version of DMS. In DMSL, a separate handle fixes the angle of the chair in any position. The rigidity is adjusted using a screw.
Multiblock
- the most durable mechanism. Often used in leadership models. It has two handles. With the help of one, the height is adjusted, with the help of the second, the swing is blocked. The rigidity is adjusted using a screw installed in the front of the mechanism.
Features of computer chairs - benefits and necessity
At first glance, they are all arranged according to the same principle. This is a very misleading impression, causing many to save on their purchase. In reality, each type of seat has different mechanisms, comfort and adjustment. Their main task is to help avoid serious stress placed on the legs and back during long hours of sitting. Because of this, a number of serious disorders with joints and blood circulation develop.
It’s easy to recognize a computer chair, despite the variety of models:
- Cross with rollers. Today, this type of support has confidently replaced chairs with legs from workplaces of all categories. This is explained by saving time when moving. You won’t have to get up again;
- The ability to adjust the height, tilt angle and location of all elements of the chair. An ordinary chair cannot boast of this;
- Availability of gas lift. This mechanism allows you to change the height of the entire structure in several parameters along with you;
- All models are something between an armchair and a stool, retaining the characteristics of both types of furniture.
Gas lifts
What sizes do they come in and how do they relate to different types of mechanisms?
Gas lift size “60” is more often used with the “Multiblock” mechanism. Gas lift size “100” is the most common and is used with both the Top-Gun Lux mechanism and the Top-Gun mechanism. A gas lift of size “140” is most often installed together with the “Piastra” mechanism.
Cross
This is the lower element of the chair to which the casters are attached. The larger and heavier the model, the stronger the crosspiece should be. Chromed metal, plastic and polyamide are used in production. When it comes to strength, the type of material is not as important as the quality of the raw material and the thickness of the material.
Metal
(chrome or matte). Looks expensive and stylish. Prone to scratches.
Polyamide
. Practically indestructible material of the crosspiece. It does not crumble due to temperature changes and does not burst due to pressure.
Plastic
. An inexpensive option that can be considered to save money. If you want to protect yourself from accidental falls, it is better to choose more reliable materials.
Upholstery
How your chair will look after some time of use, how much effort it will take to maintain - all this depends on the upholstery of the seat and back. Modern office chairs are covered with the following upholstery materials:
Genuine Leather. The most reliable, environmentally friendly and solid material, but also the most expensive;
artificial leather. Practical and cheaper material that does not require special care. The Martindale test will tell you about the quality of a chair upholstered in artificial leather: the greater the number of abrasion cycles, the longer the product will retain its original appearance;
textile. The fabric upholstery of an office chair is of synthetic origin, and its wear resistance is also determined by the results of an abrasion test;
acrylic mesh. The mesh is mainly used to cover the backs of modern office chairs, but sometimes parts for the seat are also made from it. Mesh is the most breathable material.
Wheels
Plastic
. The most budget-friendly, but noisy. Suitable for carpets, but can scratch parquet and laminate flooring.
Polyurethane
rollers made of elastic plastic or rubber are soft and do not damage laminated parquet, ensuring comfortable sliding.
An additional option for a chair on wheels is a lock. Rollers with this function keep the chair stationary. We offer rollers with manual and automatic locking.
Additional amenities
Neck pillow
. Provides additional support. For short or very tall people, it may not correspond to height, since according to GOST everything is done on average.
Ergoback
. You can purchase it additionally if your chair does not have a lumbar support element. In the middle price segments and above, there is no need for an ergoback.
Step
. Found in children's chairs. It can be adjusted to the length of the child’s legs to achieve a 90° angle at the knees. Thus, as the child grows, he will not stop feeling comfortable in the chair - just adjust the footrest.
Stylistic decision
The color, style and design of a product can accurately tell about its owner. Such characteristics provide information about a person’s well-being, as well as his demandingness. For example, an additional element in the form of a lumbar cushion or headrest shows the luxury of the chair. This option is more likely to be purchased by a manager than by an ordinary employee.
If we touch on the topic of practicality, it is better to choose dark colors so that dirt is not so noticeable. There are many shades of brown, gray and black, so you can choose the right one. If you want to stand out, show your originality and individuality, you can choose bright colors or choose a print that suits the style of the room.
We must not forget about the combination of furniture and interiors. For example, bright shades will look good in informal settings - printing companies or advertising agencies. And monotonous and discreet options are perfect for the strict classic style of the office.
At KINGSTYLE we will help you sort out every detail of the chair
Managers are always ready to help with advice based on 10 years of experience. Call, chat on the website or come to our salons for a consultation.
Delivery
in 1–3 days. Pickup available from warehouse or showroom.
Payment
in any way convenient for you. By bank cards, in cash, through the “Settlement” system and in installments.
Guarantee
- from 12 months or more, depending on the manufacturer.
Filler
The quality of the internal filler determines how long the volumetric elements of the seat and back of the chair will retain their original shape. Furniture manufacturers fill chairs with polyurethane foam or foam rubber. Molded polyurethane foam is considered a more modern and durable material; it is used in the manufacture of special orthopedic chairs for work.
Can't decide on a chair? Contact us, our experienced managers will help you choose a model based on your needs.
