Wooden apron for the kitchen: material features and installation rules

Although you can choose the tone of the apron, taking into account the color of the kitchen set, it is completely optional. For example, you can play with contrast, this can make this element of the kitchen more impressive.

Here are some options for choosing colors and combining with the kitchen set.

In general, there are neutral colors that match any palette. For example, it is possible to have a cream, gray, white tone. We have given just a few examples of organizing an apron as an interior element in the kitchen.

Important: Start primarily from your vision. If you choose neutral colors, then even if you probably replace the furniture, you won’t need to change it .

Next, let's look at some examples of what you can use to make a kitchen apron.

Expert opinion

Strebizh Viktor Fedorovich, leading construction foreman

For a reliable and strong connection of plywood sheets using a confirmat with a diameter of 7 mm, we drill two holes for its threaded and non-threaded part with different diameters of 5 mm and 8 mm. If you want to clarify something, please contact me!

What is plywood?

To put it simply, plywood is many layers of thin wood that are glued together, as a result we get a material of greater thickness.

You will say why this is necessary, take boards or a furniture board and that’s it. But the use of such materials has disadvantages. Wood reacts to environmental changes and especially to humidity. In humid conditions, wood accepts moisture and expands. When it becomes dry, moisture leaves the wood and the board dries out, its width and thickness change.

Plywood does not have these problems; thin layers of wood are glued at 90 degree angles to each other, which gives the plywood dimensional stability and equal strength in all directions.

In addition to plywood consisting only of layers of thin wood, there is plywood with a core of other materials, such as MDF or composite materials.

What was used in the work?

It was decided not to remove the old coating, which was in excellent condition, but simply change its appearance by covering it on top. And, of course, the question arose of how and from what to make it.

It was decided to use thickened plywood as the main material. It would be more convenient to work with boards, but their thickness is greater than that of plywood. And the cost of ordinary lining, as they say, “bites”. Plywood holds paint perfectly, and, most importantly, the sheets can be cut as required. Moreover, this can be done directly in the construction goods hypermarket.

In addition to plywood, the following was used in the work:

• primer;
• enamel with semi-gloss effect;
• universal construction adhesive for installation;
• putty.

Of course, in the process of creating the apron, tools and sandpaper also came in handy. In this case, it is more convenient to apply the putty not with a spatula, but with a soft squeegee.

Color laminated plywood

Color laminated plywood is made by pressing special paper impregnated with resin onto hardwood plywood under high pressure and at high temperature. The result is a material with new performance properties and appearance.

Depending on the texture of the film used for laminating plywood, the following types of colored plywood are distinguished: W - embossed, mesh; F - smooth, glossy; SP - paper.

Selecting material for countertops

The kitchen work surface is more often than other surfaces exposed to stress and damaged during use. Each material for making countertops has its own advantages and disadvantages. We will consider the most popular types of materials.

Chipboard is easy to install , has a high level of strength, a rich color palette, which makes the material very advantageous compared to others.

Artificial stone - it will cost much more than chipboard, but will look creative and more aesthetically pleasing. It can harmoniously complement any interior and look stylish. Easy to care for, resistant to shock, moisture, and high temperatures.

Natural wood - this material always goes perfectly with stone, glass, metal and many modern materials. The material has a lot of advantages - environmental friendliness, aesthetics, it will harmoniously fit into the interior of any kitchen. The only drawback is the too high price.

Natural stone is a very beautiful and natural texture; each product will have its own special and unique pattern. Disadvantages include very high cost, heavy weight and high maintenance requirements. Cannot be replaced if damaged.

Stainless steel - fiberboard slabs are covered with this material. During operation, it is almost not damaged; small scratches may appear if the surface is used too intensively. The disadvantages include the opinion that such a surface contributes to the destruction of useful substances in products when they are on it.

Solid wood - despite its environmental friendliness, beautiful appearance, good quality, natural wood is characterized by low wear resistance. The material requires maintenance and is very expensive.

Impact-resistant tempered glass - ideal for creating the most modern designs. A kitchen set with such a countertop will look weightless, light, and impressive. No marks remain on the surface, it does not absorb odors. This material is expensive and requires special care during operation.

Countertop installation cost

Specialists from many companies who replace kitchen furniture facades, countertops, splashbacks, and fittings will be able to quickly accept and fulfill your order.

A partial replacement of budget options will cost from 3,000 rubles, a complete replacement of a countertop will cost from 7,000 rubles and above . If we talk about installing an integrated corner countertop made of artificial stone, then all turnkey work will cost around 20,000 rubles.

If we talk about cost, then you need to take into account the size, shape, and material from which you plan to install the countertop. The more expensive the material, the more expensive the product will be. Specialists provide the necessary advice about their services and answer all customer questions.

Brushed plywood in furniture design

Another interesting use of plywood that is worth mentioning is the work of designers from the Japanese studio Schemata Architecture Office. The Japanese presented a collection of plywood furniture called ColoRing. The furniture, to be honest, is clumsy, but the result of the unusual coloring of the plywood is interesting.

For finishing plywood, a technology called Udukuri was used, which is known to us under the more familiar name brushing . The essence of the technology is that soft fibers are selected from the top layer of plywood with a special brush, resulting in a surface with a pronounced structure of growth rings. This treatment allows, for example, the main part of the plywood to be painted in one color, and the exposed pores in another.

Stage six: filling cracks

Once the first coat of paint has dried, it's time to work on the gaps between the pieces of plywood. Of course, you can sheathe the wall without leaving any gaps. But in this case, the wall was not level, so it was impossible to place the boards end to end.

As a rule, when filling cracks, a spatula is used. But in this case it is much more convenient to work with a soft squeegee. This tool does not harm the freshly painted surface and perfectly removes excess putty that appears above the crack.

FC plywood for furniture production

In the assortment of plywood on the Russian market, the most suitable type of plywood is FC plywood .

What is FC plywood

The abbreviation FK stands for as follows: F is plywood, K is urea glue.

This plywood is non-toxic, unlike plywood, the layers of which are glued together using glue containing toxic formaldehyde resins.

Plywood has such unique properties as light weight, beautiful texture, wear resistance, and ease of processing.

Stage two: preparation of materials

The actions at this step of the work directly depend on what material is used and how large an area they need to cover.

In this project, the plywood was cut using a miter saw into large boards of varying lengths. This is done in order to lay out the pieces of plywood in a checkerboard pattern.

Of course, it was possible to do things differently and cut out large panels from a sheet of plywood to cover the wall without gaps, with a minimum of joints. But this idea was abandoned due to the fact that the plywood could swell due to changes in temperature and humidity.

Photos of kitchens using plywood

Plywood for making kitchens is used both in its “pure” form, that is, with minimal finishing and preserving the natural texture, and it is also painted and tinted, and sometimes in unexpected colors.

Stage five: applying the first coat of paint

One coat of paint is not enough to decorate a kitchen backsplash. The specific location of this interior element is such that the paint is exposed not only to changes in humidity and temperature, but also to mechanical stress.

Agree that when putting a saucepan aside or hanging ladles and spatulas on hooks, it is very difficult not to touch the surface of the apron. Therefore, you need to paint at least twice. Otherwise, you will then have to decorate scratches and areas with removed enamel.

For painting you can use either a brush or a roller. The first layer of paint will be covered by the second, so there is nothing wrong with noticeable brush strokes.

Interesting details when making kitchens from plywood

I think you will be interested if we pay attention to the details, individual elements of the plywood kitchen .

The first thing we see is that both the body and the facades of the kitchen are made of plywood. The handles on the cabinets are in the form of through holes, and on the cabinets they are in the form of a U-shaped milling.

The handle on plywood facades can also be made in the form of a so-called integrated handle. The handle is a milling of a recess in the edge of the facade; such a recess allows you to open the facade with your fingers.

Suitable interior styles for a wooden house

Watch a video with expert advice on how to transform a kitchen in a wooden house:

For a kitchen in a wooden house, styles are suitable where the main role is played by the stove and wood.

Chalet, finish the apron with imitation stone

A chalet is a suitable option if the stove is a hearth. The rest of the interior will ideally line up around it:

• the walls should be left unfinished - simple wooden ones;
• the same ceiling, on which it is worth highlighting the beams;
• the floor is also wooden, covered with dark varnish;
• the wall near the fireplace can be slightly “smoked”;
• here it is worth installing an apron, laying it with tiles with a pattern that imitates stone;
• the furniture in such a kitchen is simple, somewhat heavy;
• rectangular cabinets, many long open shelves, stone sink;
• the table is long, you can put two or three small benches, a couple of chairs with wooden arms and backs;
• It’s better to do without curtains, but you can limit yourself to small plain curtains in pastel colors;
• It’s good to hang bunches of dried herbs, garlands of onions and garlic throughout the kitchen, and put boxes and baskets for storing vegetables.

Provence in the country

• The walls should be covered with clapboard and painted in light, soft colors;
• whitewash the ceiling and leave it there or install dark beams;
• paint the stove with white paint so that the brick texture is clearly visible;
• lay out the apron with light tiles, possibly with a small pattern, or with brick-like tiles;
• furniture made of light wood with facades of simple shapes, many open shelves where jars of spices, coffee, containers with cereals, dried fruits, wicker baskets with fruit are stored;
• shelves with vases, small saucepans, low cabinets with baskets for onions, apples, garlic;
• a sofa with light upholstery and decorative embroidered pillows;
• long light table;
• there are light curtains on the windows;
• many indoor plants.

Russian style with stove

This style often plays on the Russian hut house. For a wooden house this is an ideal option. First of all, because here, as a rule, there is a Russian stove. Everything revolves around her:

• bleached Russian stove;
• the kitchen walls remain log, they are only slightly “ennobled” by cleaning and covering with a special varnish that will highlight the texture of the wood;
• It’s better to hang a simple clock on the walls, perhaps a cuckoo clock, and black and white family photographs, grouping several at once into one large frame under glass;
• wooden floor, bleached or painted light brown;
• the ceiling, like the stove, is bleached;
• on the windows there are short chintz curtains with a discreet floral print;
• the cooking area is concentrated near the stove;
• there are small stands for cast iron pots and frying pans, wall cabinets for dishes, an open dish drainer above the sink;
• As a rule, in such kitchens it is better to do without an apron, or lay it out with bricks;
• in the dining area there is a long wooden table and a bench along the wall;
• on the other side of the table it is better to place stools rather than chairs;
• a purely Russian piece of furniture - a chest for storing vegetables and kitchen utensils, it can be placed along the wall, covered with a rough cloth, with pillows;
• Homespun rugs are laid on the floor.

OSB furniture

Along with furniture made of plywood, in the expanses of the burzhunet you can also find a completely unusual, at least for me, use of OSB for the manufacture of furniture .

Indeed, it looks unusual - a textured OSB surface combined with modern materials. But one thing remains unclear: how safe this material is for health. Obviously, it is necessary to select OSB with minimal emissions of dangerous formaldehyde and other toxic resins.

12 options for a kitchen apron made from scrap materials are very affordable, easy and fast! They're all simple, cheap and can be made (or removed) in literally minutes, making them ideal for renters or anyone looking to change up their kitchen splashback.

So let’s look at what to make a kitchen apron from and what materials are used for installation.

Kitchen front and countertop

To restore furniture to its former attractiveness, it is not necessary to completely change it. It is possible to replace individual elements using high quality materials.

Most people would like to replace the kitchen facade or other parts in the kitchen interior. This allows you to save money and change the appearance of furniture and the style of the kitchen.

Replacing the kitchen facade has its undeniable advantages:

1. Cost-effective - the updated facade will cost much less than a new set.
2. Preservation of the usual style - if individual elements are damaged, there is no need to change the style if you like it.
3. Saving time - replacing a facade takes little time if it is carried out by specialists. This is much faster than replacing individual parts.
4. Change of design - if you want to update the style and design, you can update the kitchen facade without large material costs. Many ideas for creating a new design will make the kitchen updated and original.

The countertop is the center of the kitchen area. Almost all work in the kitchen is performed with its help. Various household appliances are installed on it, and it unites the entire kitchen space. Its color should be harmoniously combined with the furniture, facade and apron. The countertop must have certain qualities :

• High strength.
• Heat resistance.
• Moisture resistant.
• Hygiene.
• Aesthetics.

Considering all the useful qualities of the countertop, it is necessary to choose the right material for its manufacture. The modern building materials market offers different options:

• thick fiberboard sheets;
• artificial and natural stone;
• natural wood;
• metal;
• glass.

Perforated panels

Such panels allow you to conveniently place the necessary kitchen utensils, hanging them in any place on the wall you choose.

• you need to attach the panels to the walls,
• and then insert hooks from the hardware store into the holes, and their location can be constantly changed depending on your needs.

Pasting walls with oilcloth

How to glue oilcloth to walls? There's nothing complicated about it.

Preparing the base

Please note that if a repeating pattern is applied to the oilcloth, then the coating should be purchased with a 10% margin. After all, the drawing will have to be adjusted.

• Preparing the base . You need to completely remove the old finish from it - paint, whitewash, wallpaper, etc. Then the walls are cleaned of dust and dirt. After this, it is advisable to cover them with antiseptic primer.
• Purchase of materials . Buy the required amount of oilcloth and adhesive from a hardware store. If the finish is not self-adhesive, then Bustilat or PVA are best suited for fixing it.

Old paint from the walls must be removed.

Wall decoration in 6 steps

Apron made of paper or card

Look how wonderfully an apron made from a glued-on world map combines with white kitchen furniture. A really easy way to make your kitchen original! How to do:

1. Cut a thin piece of plywood to the exact size of the wall, glue paper on top,
2. and then apply varnish (so that the paper does not get wet from moisture and steam in the kitchen).
3. Once dry, attach the plywood to the wall.

They used cards here, but you could use wrapping paper, comic books, magazine covers, anything like that.

You can attach frequently used recipes to the kitchen wall , this will save you from having to look for them when needed, and will add an interesting touch to your kitchen design. You can also attach your favorite quotes or poems.

How to replace the façade and countertops

Now many companies offer their services for replacing countertops, facades and other elements of kitchen furniture. Experts say that such work can be done independently , if you know how to carry out such work step by step, and also have all the necessary tools.

Over time, many housewives begin to think about updating the countertop, facade or kitchen apron. Currently, this service is quite popular. How do you replace the countertop and other elements of the set?

The entire replacement process comes down to several stages:

1. You need to choose a company and call surveyors to your home.
2. Selecting the parameters of a new product - shape, color and type of coating.
3. Concluding a contract for replacement work.
4. Dismantle the old countertop if it cannot be restored.
5. Installation of the product.

After choosing the material and all the parameters of the countertop, the craftsmen make it. When it is ready, the craftsmen dismantle the old product . They disconnect it from the hob, sink, turn off the water supply, oven and other appliances connected to the countertop.

Installation of the new product is carried out in the same place , adjusting it to the dimensions of the main structure, with cutouts and sealing of the ends for the hob and sink in place. After installing the countertop, the craftsmen connect all the appliances and water supply. During the installation process, craftsmen use auxiliary elements:

• corners;
• connecting strips;
• self-tapping screws;
• skirting boards.

In addition to replacing the countertop, specialists replace the wall panel (apron). After completing all work, they check the connection of all communications.

Self-replacement

You can do the work of replacing the countertop yourself. At first glance, the process seems simple to remove the old work surface and install it in its original place. In fact, such work is very painstaking and requires not only theoretical knowledge, but also practical skills .

It is more difficult for a non-professional to choose the necessary tool, material, and accessories. You also need to know the features of the material and how to work with it. If something is done incorrectly, then such a mistake will be costly and, in the end, replacing the countertop will cost a decent amount.

If your attempt is unsuccessful, you will have to turn to specialists, so you should not save money, but it is better to immediately entrust your kitchen to professionals . They will complete the work quickly and efficiently, having extensive experience in working with different materials.

Materials for kitchen facades

Changing completely kitchen furniture is unprofitable financially and takes a long time. There is an alternative to such a replacement - updating the facade of the kitchen unit. What materials can a renewed façade be made from now? The most popular options are offered:

• Chipboard is the most economical option.
• MDF - its qualities are very similar to natural wood, it looks beautiful and lasts a long time.
• Solid wood is reliable and environmentally friendly, looks stylish and noble.
• Aluminum profile - looks stylish and modern.
• Glass will decorate a kitchen of any style and add a special chic to the furniture.
• Artificial and natural stone is reliable, durable, and goes well with different styles.

If the internal fittings, drawers, cabinets, moving mechanisms are fully functional, there is no need to rush to change the furniture. It is enough to simply update the façade of the furniture and it will again become like new, but brighter and more modern.

Apron made of wood or MDF

Wood planks add a touch of rustic style. To make such an apron, you will need a thin piece of plywood exactly the size of the wall. All the boards are cut to the required length and attached to the plywood, and then the whole thing is screwed to the wall.

How to do it yourself:

1. To create such an apron, wooden boards were painted white,
2. and then cut into equal pieces (the size of tiles).
3. After this, all the “tiles” are attached to a thin piece of plywood that is the size of the wall, and then the plywood is attached to the wall.

Boards can be laid out to create different geometric shapes. For example, here is a zigzag made of boards painted white. Of course, in this case, you need to clearly mark the wall so that all the pieces fit together well.

And one more example of using boards. Here we took ordinary untreated wooden boards, attached them horizontally to the wall, and this is what came out of it!

How to age wood - a detailed master class

Stage three: installation of plywood sections

Since the goal of transforming the apron was to create a neutral, smooth surface, devoid of any decorative or other accents, it was decided to abandon the use of hardware.

The boards are simply glued to the wall in a checkerboard pattern. Since the plywood had already been treated with antiseptic impregnations, it was not pre-coated with anything. Of course, if a material that has not been processed in production is used, then before installation the boards must be coated with an impregnation that prevents the appearance of mold.

The doctor called the unusual effect of taking medications by patients with COVID-19

5 cases that prove that sometimes styling and light makeup are enough

Short bob and more: what haircut to give to those with curly hair

Mosaic apron made from old dishes

Broken dishes are a kind of homemade tiles. Laying a kitchen apron and the result are similar, only you don’t need to buy the material, because it is used for dishes that you haven’t used for a long time and have finally found a new use.

And one more option for using this method, and here the result is similar to a painting of modern art. Beautiful and impressive!

How to make a mosaic yourself - watch the master class

Walls made of natural materials without finishing

Most often, traditional Russian or country (country) style is used to decorate kitchens in wooden cottages. But not always - modernism and minimalism are also appropriate for decorating such premises.

Spacious Wenge kitchen in neoclassical style. The island part combines a dining table and a bar counter.

Discreet minimalism is combined with rounded timber. The shape and natural color of the logs soften the strict style of the U-shaped kitchen.

Russian style in room decoration. The cabinet fronts, walls, floor, ceiling, bar stools, blind slats and even the door - everything here is made of wood.

Russian style

Stone apron

A kitchen apron made of stone will help create a rustic style and will be a wonderful addition to the interior.

Do you constantly collect pebbles on the beach? Or maybe there are a lot of them in your garden? Then look at one of the options for using them. It looks like mosaic masonry, beautiful and original!

Alternative options

If natural wood is not suitable, but you still want to use a similar texture in your design, it is worth considering alternative options. Most often in such cases the following materials are used:

• Veneered MDF. A special material - veneer - is applied to the MDF sheet and covered with a protective layer of varnish, which ensures its moisture and wear resistance.

On a note. Veneer is a natural material; in fact, it is thin sections of wood.

An apron made of veneered MDF panel is a beautiful and practical solution

• Plastic and laminated panels. Artificial substitutes for making a wood-look kitchen apron involve the use of polymer materials. Plastic lining is available for sale, as well as panels with a pattern that imitates wood.
• Wood imitation tiles. The best option in terms of operation is wood-effect tiles for the kitchen backsplash. The relief surface increases the resemblance to wood.

Tiles imitating the texture of natural wood will last for many years

On a note. You can also use glass skins with photo printing. Not only imitations of boards are available here, but also images of log coverings, saw cuts, etc.

The boards are screwed to the sheathing on the wall using a convenient tool

How to design a kitchen apron in the country: photo

If you need to decorate a work area in a country house or country house, where functionality is important and appearance does not matter, you can choose good inexpensive solutions. Some of them are perfect for home use, as the quality of the materials produced is becoming increasingly higher and even cheap solutions look good:

1. PVC panels for wall decoration. You can either glue the panels to the surface with liquid nails, or nail a small lumber frame to the wall and secure the trim to it. The design weighs very little, and is easy to care for, as grease and dirt can easily be wiped off with a cloth.
2. Special kitchen panels made of plastic. Now on sale there are products designed specifically for kitchen aprons, imitating brick, tile, mosaic or depicting any composition. They usually have a size convenient for installation and are attached in much the same way as standard plastic lining. The advantage of this solution is its aesthetic appeal at a very low price; it is an ideal option for a summer residence.
3. Laminate. Since the floor panels are durable and wear-resistant, they are also suitable for decorating a kitchen apron. The assortment is very large, you can find options with wood texture or imitating stone. As for fastening, use liquid nails; they securely fix the panels to the wall, and if necessary, they can be torn off to carry out repairs. The main thing is to choose products without gaps at the joints.

Advice!

If the country house is not heated in winter, use plastic panels, as they are not afraid of temperature changes.

For your dacha, choose cheap solutions, even if they become unusable in a year or two, replacement will not require large expenses. You can also use available materials. For example, varnish several old boards and make an authentic apron that perfectly matches the atmosphere of a country house.

What furniture and appliances are suitable?

The choice of furniture, of course, begins with the kitchen set. In a kitchen in a wooden house, cabinet furniture will look good:

• white;
• with natural wood texture (or imitation) - walnut, wenge, oak, pine;
• muted dark shades (turquoise, burgundy, blue, wet asphalt);
• in black (matte or glossy finish).

In a modern kitchen in a wooden house, avoid deliberately fashionable details - chrome and plastic, for example, will look out of place. But glossy smooth facades go well with wood. However, it is best to turn to the classic direction with carved and glazed doors. In order to save money, for example, for a kitchen in the country, they abandon the facades altogether, replacing them with cute curtains at the bottom, and leaving open shelves at the top.

The photo shows a small corner set

The dining table and chairs (or soft sofa) are matched to the kitchen design. A round or rectangular table made of solid wood, for example, will fit perfectly into the American style. Airy with a glass tabletop will suit minimalism. In a small area, you can completely abandon the dining table by decorating a kitchen with a bar counter in a wooden house. The slab stand that zones the space looks original.

Advice! A peninsula level with the countertop will be more functional than a high counter - it can also be used during cooking.

If space allows, place a comfortable sofa or wooden bench with soft pillows instead of chairs. It fits perfectly with a rustic design, and inside you can store something you need - food supplies, textiles, utensils.

As for appliances, it doesn’t have to be in a retro style (although this would be an excellent solution for decorating a kitchen in a country or Provence style). But it’s also best to avoid ultra-modern high-tech models. Choose functional household appliances that will remain as discreet as possible.

The photo shows a rustic style hood

Kitchen options without upper cabinets: how to make an apron

A kitchen without wall cabinets is original, but you will have to decide how to design a work area that is not limited by anything. In this case, remember that the height of the finishing under the apron must be at least 60 cm so that splashes do not fall on the wall. Here are some options:

1. Decorative plaster is the simplest solution with which you can finish a wall from top to bottom. In this case, it is better to highlight it due to the color shade and texture. Think about how best to do this to get the best effect. In this case, after applying and drying the plaster, be sure to use a special composition to protect it from moisture to make it easier to wipe the surface and prevent grease from being absorbed into it.
2. Shards of tiles, ceramic dishes, and glass are good for creating mosaics. An interesting, but labor-intensive solution that will require a lot of time, but the result is worth it. You can decorate either just the work area or the entire wall, it all depends on your desire.
3. Skinali are glass panels that are often installed instead of a traditional apron. You can order them in any design - with pictures, photos or inscriptions, there are no restrictions. Tempered glass does not break and can withstand temperature changes. Mounting is easy - drill holes for fasteners in the right places and secure them with special screws.

You can consider other solutions - from clinker tiles to artificial stone or its imitation from polymer compositions. You can search the Internet to see what interesting options there are and choose what you like.