How to disassemble an interior door to replace glass. Types of glass and options for what can be replaced, tips on how to disassemble and install in an interior door

Interior doors, unlike street doors, are decorated much more often. Among all kinds of decorations, glass inserts occupy the lion's share. A glass panel with glazing looks much better than a blank door. Different materials are used for decoration: from the simplest window glass to triplex or reinforced glass. In the first case, the material is very fragile and can shatter into fragments even from a small impact. In the second, it is very difficult to break the glass, but it can sometimes happen. And although the insert will not shatter into pieces, but will continue to hang in the door thanks to a special film or fittings, the appearance of the canvas will be disrupted. Is it possible to change the glass in an interior door yourself and how to do it? Let's find out in our article.

When is repair appropriate?

Glass inserts are most often changed for the following reasons:

Broken glass must be removed, even if it did not fall out. A sudden movement when closing the door will result in possible personal injury.
Aging of decorative inserts affects their appearance and also often leads to replacement.
Installing glass doors in your living room is an easy way to freshen up your interior. The repair option only includes replacing the glass in the panel or changing the size of the frame.
The glass insert may be accidentally stained or scratched. You can replace the glass if it's easier than cleaning it up.

Installation stages

Replacing glass with your own hands begins with determining the parameters of the insert to be replaced. When taking measurements, it is important to take into account that the glass must have gaps after it is fixed in the grooves. Otherwise, there is a high risk of damage due to pressure.

Replacement of glass in the doors of a bedroom or other room is carried out according to the following scheme:

Apply sealant into specialized grooves on one side of the canvas.
The new insert is threaded through the rubber seal and installed in a groove lubricated with sealing material.
Apply sealant or adhesive to the back of the groove.
After 5 minutes, install the dismantled glazing beads and secure them with small nails (if necessary).
Leave the door motionless for the sealant to dry and secure the new decorative element.

Types of glass for interior doors

Working with glass largely depends on the type of glass you have chosen for installation in the interior door. The most common are 3 types, the features of each must be taken into account when working with it.

Ordinary glass. The advantages of the material include its affordable price; working with glass does not require special knowledge and skills. But after fixing ordinary glass, additional finishing will be required, which entails increased costs. Buy either impact-resistant glass or cover it with a special film that prevents the glass from shattering in the event of an impact - these secrets are also associated with an increase in the price of glass.

Decorative glass. Installation of decorative glass is as simple as the previous version. The choice of various patterns and types of decor will not leave the most demanding buyer indifferent; everyone will find glass that will fit into their ideas about the future piece of furniture. Among the disadvantages are the rather high cost per unit of material, as well as the difficulty in selecting new glass if replacement is necessary.
Organic glass. Plexiglas is not a completely derivative state of glass; the material is close to plastic in its characteristic qualities and operation. And this is both a plus and a minus of the material. The advantage of organic glass is its strength; breaking such an insert is not easy. The disadvantage of organic glass is that it gradually changes in appearance; over time it becomes cloudy. To avoid this, it is necessary to promptly coat the plexiglass with a special compound.

Transparent

Most often, transparent glass is installed in door structures, which differ from other types at an affordable price. Among the disadvantages is fragility, since such material breaks easily. If the transparent glass is not severely cracked, it can be glued together with decorative film.

Matte

Sometimes apartments have doors with frosted glass inserts. Such an interior door not only decorates the interior of the room, but also protects it from the penetration of bright sunlight.

Also, the advantages of matte material include its high density, reliable sound insulation and moisture resistance.

With a pattern, corrugated and stained glass

The main feature of this type of glass inserts is their uneven surface and opacity. The advantages of corrugated coatings include a low level of sound permeability, thanks to which it is possible to protect the room from extraneous noise.

Tinted or mirrored

Mirrored and tinted glass inserts are more often used in shopping centers, but some manufacturers install them in interior doors. Tinting the glass surface impairs the transmission of light through the glass and makes it less transparent.

How to remove cracked glass?

Replacing broken or cracked glass in an interior door begins with removing it from the door leaf. The greatest difficulties arise if the glass insert is cracked, because it must be removed in such a way that the glass does not fall apart during dismantling.

It is best to carry out all work after the door has been removed from its hinges and laid on a flat horizontal surface. If this is not possible, you need to open the door and fix it securely at the bottom so that the door leaf does not wobble during operation.

The cracks themselves need to be covered with several layers of transparent, durable tape on both sides of the glass. It is very important that the tape also covers the undamaged part of it. This manipulation will secure the glass and prevent it from falling apart during dismantling.

You will also need:

gloves, preferably rubberized on a fabric basis;
broom and dustpan;
chisel;
several pieces of thick paper;
small hammer.

All work must be done with gloves, this will help protect your hands from damage. The further procedure for removing cracked glass will consist of the following steps:

It is necessary to establish exactly how the glass insert is fixed in the door leaf. It can be inserted inward through the end or secured with beads.
If the glass is installed through the end, the door will still have to be removed from its hinges. It can only be removed through a special hole.
If the insert is secured with glazing beads, then using a chisel and hammer they need to be moved slightly to the side. There is no need to completely remove these fasteners.
The glass is then slowly removed from the canvas. It is better to perform this operation together, especially if the insert is large. One person will have to hold the glass at the location of the cracks, and the second will carefully remove it from the door.
It is necessary to clear all grooves of sawdust, door putty or sealant.

The dismantled insert should be disposed of immediately, having first wrapped it in prepared paper. If a piece of glass breaks off during the work, you should carefully sweep the room.

There are no particular difficulties when performing such work. The main thing is to immediately prepare all the necessary material and carry out the actions slowly.

It is worth paying attention to the condition of the rubber band, which is located between the glazing bead and the glass itself. If it is severely damaged or torn, it must be replaced with a new one.

Don't miss: What are side doors: their advantages and disadvantages

What you will need

Select several materials that will be needed to complete the job.

Gloves

It's no secret that you can cut yourself with glass, and therefore it is recommended to think about protecting your hands in advance. Experts recommend protecting your skin from sharp glass corners with gloves. You should not use gardening gloves, as they are too thin. Instead, it is better to use products made of durable rubber.

Broom and dustpan

Broken glass leaves many small fragments that need to be disposed of. Some people remove them with a vacuum cleaner, but it is better not to do this. To collect the fragments, you need to use a regular broom and dustpan. You must sweep very carefully to collect all the debris from the floor.

Chisel

A chisel is the main tool that must be used when replacing door glass. With its help, they carefully pry up the glass sheet and pull it out of the door. It is recommended to use small chisels no more than 2-3 millimeters thick.

Several pieces of thick paper

It's no secret that glass is installed in special grooves on the doors. Sometimes the thickness of the glass is not enough, and it begins to hang tightly in the door groove. To solve this problem, you need to use a special sealing material. For sealing, strong paper or rubberized material is used.

Small hammer

To remove the door glass you will need a small hammer. This tool is used to remove the beads that hold the glass in the groove. You need to beat the glazing beads carefully so as not to accidentally break them with a hammer.

Disposal

All unnecessary glass must be disposed of so that there are no shards left on the floor. To do this, sweep the floor several times with an ordinary broom. Collected garbage is placed in a trash can or other container. Glass shards must be removed from the apartment immediately to avoid accidental injury in the future.

Sealing rubber bands are often glued between the glass sheet and the fastening bead, which are used to increase the tightness of the joint. Experts recommend removing the old rubber band and replacing it with a new one.

During removal, it is carefully pryed with a blade and disconnected.

Ways to fix the situation

First of all, you need to remove the glazing beads, press them more tightly to the glass and nail them again. The method is effective, but not durable. The rattling will return over time. For an experienced person this work is simple. This can be done without removing the door from its hinges. If the door has been in use for a long time, then the glazing beads are also old. They may break in the process. It is worth purchasing spare parts in advance.

Important! If the glazing beads have already been removed, it is better to immediately fix the glass with transparent silicone. Pre-clean the grooves from dust and debris.

The sealant can be replaced with a tube from a dropper:

Lay out and stretch the tube on a convenient surface. Unnecessary laminate boards will do.
Using a utility knife, cut the tube along its entire length.
Place the resulting halves in the gap between the glass and the wooden frame.
It is convenient to push the tube with the end of a flat screwdriver.
If the width of the groove allows, then do the procedure on both sides.
Continue until all gaps are filled.

The method completely eliminates rattling. It eliminates contamination and does not require drying time as is the case with sealants.

We measure the opening for new glass

There are also two options here: call a glazier or take the measurements yourself. If the broken glass had a complex shape, then it is better to use the first option.

Moreover, it is better to call a master from a workshop where this glass will be cut out immediately. With the correct and simple glass shapes, you will be able to take the required dimensions yourself.

You can buy glass in construction stores or special workshops where they cut out products. Modern manufacturers offer a wide selection of products with different relief patterns, levels of transparency, shade or resistance to damage. If children live in the house, then it is important to purchase glass for the interior door with high impact resistance.

The peculiarity of calculating the parameters of an insert item is the measurement of the doorway. To this indicator you will need to add a few millimeters of depth for inserting the product. It is better to take all measurements using a ruler to determine the exact distance of the bed. Otherwise, the dimensions will be inaccurate, which makes installation impossible.

Important! Glass should never fit closely into its bed! That is, its dimensions should be 1.5-2 mm smaller than the stock on each side.

Crops for areas with high humidity

Moisture-loving plants are divided into two classes:

beautifully flowering with attractive leaves;
deciduous and decorative with inconspicuous flowering.

There are lovers of damp soil among both annual and perennial plants. Most of these crops belong to the group of trees and shrubs (for example, viburnum, serviceberry, hydrangea) or to the herbaceous class of perennial plants that can live in one place for several decades. Such varieties grow naturally in shallow waters, swamps, and water bodies. They are also perfect for artificial plantings in summer cottages.

Moisture-loving shrubs and trees have the ability to drain the soil around them. To eliminate excess moisture in a summer cottage, you can plant a birch tree, which, after reaching maturity, drains the soil within a radius of about 10 meters. Moisture-loving trees also include elderberry, maple, and willow. Examples of moisture-loving shrubs are silver currant, viburnum, cranberry, etc. Fruit-bearing bushes can be planted in a small summer cottage with high soil moisture. However, it must be taken into account that even moisture-loving plants do not bear fruit in overly swampy and damp soil.

Glass replacement tools

To ensure that nothing distracts you while working, prepare in advance the materials and tools that may be needed in the process.

Selected replacement glass, the right size, edge-treated, safe to work with.
Gloves to protect hands from cuts. Thin garden gloves will not work; they will not protect you from sharp glass if the material falls and breaks; choose durable special clothing.
The tools you will need are a chisel and a furniture hammer.
Sealing paper will be needed to adjust the glass to the size of the desired groove.
Prepare silicone to firmly fix the glass in the door opening.
Do not move the broom and dustpan far away; sweep regularly while working to avoid cuts and splinters.

What to use?

Of course, interior doors with glass inserts look impressive and stylish, but due to the fragility of the material, situations often arise when the decorative element needs to be replaced. Owners prefer to replace the part with a similar one; they waste a lot of time searching for a suitable element, but this is not always possible.

Advice. If the search for a similar part is not successful, ordinary glass, frosted or any other, is replaced with one of the alternative materials produced according to modern technologies.

Fiberboard sheet

A temporary and budget option is laminated fiberboard, folded in half so that the smooth side is on the outside. Or a regular, non-laminated type of fiberboard, on the front surface of which an opaque decorative film is then applied. This method is considered the least aesthetically attractive and short-lived, therefore it most often serves as a temporary way to hide the missing glass element in the overall door structure.

Decorative film

If the glass is cracked but does not crumble, or if there are small chips, all parts of the structure are covered with decorative film. In this way, not only defects are hidden, but also integrity and harmony in the appearance of the door structure are achieved.

Stained glass insert

It is one of the most expensive materials used by manufacturers in the manufacture of interior doors. This glass adds style and uniqueness to the door; it is quite durable and does not require additional modification. The only drawback is the difficulty in finding parts with similar decor, so you will have to change all the parts, which costs a significant amount.

Regular

Transparent material without additional decor at an affordable price is considered one of the most suitable for replacing a broken element. After taking measurements, the glass is ordered from a glazier and inserted in place of the damaged element. If you have the necessary tools, a glass cutter, for example, you can do the cutting and cutting yourself. Then the surface is decorated with a special film or any other suitable material.

Don't miss: Interior doors in the interior: light and dark options for apartments and private houses, real examples and tips for choosing

Organic

In other words, it is a transparent plastic that resembles glass in appearance. It is also called monolithic polycarbonate, a durable, unbreakable material, the only drawback of which is the clouding of the structure. This is due to the appearance of scratches on the surface of the material. The application of decorative film will help protect the plexiglass or hide existing defects, which will additionally serve as a decoration for the door.

Tempered

Ordinary glass, made using a special technology, which has undergone heat treatment, giving the material not only increased strength, but also fire safety and sound insulation.

Selection of material

Frosted or corrugated glass is used where a view of the room from the outside is undesirable: in the bathroom, bathroom, bedroom. These types of material have a greater thickness than transparent window glass: it reaches 4-6 mm. A home craftsman will not always be able to handle cutting on his own. Therefore, after dismantling the old glass, it is recommended to take the dimensions of the opening for insertion and order a replacement from the workshop of a construction company.

For the living room, decorative glass for doors is more often selected: with an engraved pattern, made using complex technology and surface treatment with a sandblasting unit, stained glass, consisting of colored pieces connected together. If desired, you can use both corrugated and frosted glass if the interior design is not particularly luxurious or is made in a minimalist style.

Both transparent and any other can be installed in the kitchen. A budget option is a simple window glass covered with film, or decorative curtains on a glazed structure.

Can I replace it myself?

Professionals do not recommend replacing glass with your own hands unless you have certain skills in working with such materials. In the absence of knowledge of modern repair technology, the door deteriorates even more. This especially applies to stained glass, triplex and glass with photo printing, which are fragile and high in cost.

However, having armed yourself with the necessary tools and familiarized yourself with safety precautions, it is possible to eliminate the problem, but with a small nuance - it is unlikely that you will be able to find the same thing, since the manufacturer does not provide for the distribution of components for door models.

But don’t be upset, broken glass is replaced with other elements made from alternative materials. The main thing is to find out the design features of the interior door and become familiar with the specifics of its production, since the fragile part requires careful handling.

If you manage to find a similar one, it is better to do the cutting from trade construction organizations that provide similar services after purchasing glass decor.

In general, replacing broken glass decor is not difficult.

Reasons for damage to glass inserts

In fact, a modern interior door is quite strong, but there are several factors that contribute to damage to the glass inserts:

Poor quality material. Typically, the manufacturer uses fairly durable glass, which additionally serves as decorated inserts. But it happens that a material made not in accordance with the technological process becomes brittle and vulnerable, and becomes unusable at the slightest blow.
Careless handling. Sometimes the door is subjected to a sharp slam, causing the glass to break. Most often this happens in families with small children. They can also deteriorate after contact with animals that like to close the door with their paws, causing it to slam.

How to change?

Before directly replacing the damaged part, it is necessary to free the door from it.

First, you should remove the door from its hinges (for more convenient operation) and acquire some devices.

Thick gloves to protect against cuts.
Slotted wide screwdriver. With this tool you can pry off the wooden trims that hold the glass in the door. If your canvas is paneled (collapsible), then a screwdriver may not be useful at all.
Chisel. You cannot do without this tool when working with materials such as wood.
Small hammer. A hammer will be needed to secure the glazing beads with small finishing nails. If you are working with a paneled model, it is better to buy a special rubber hammer to lightly hammer the panels while assembling the structure.
Stationery knife. Such a knife will be needed to remove the old sealant at the installation site of the new glass.
Rubberized insert or sealant. Special seals not only ensure high-quality shrinkage of the fragile insert, but also prevent the occurrence of rattling during operation of the door leaf. A loose structure may also rattle during use.
Construction paper bag, cardboard box or piece of thick paper. The paper will be needed to carefully and safely wrap and remove the fragments remaining from the previous glass insert.

The following designs are used to install glazed interior doors.

Shield ones. These are products where glass is attached using special glazing beads by overlaying.
With grooves for insertion on one of the sides (they are also drawer grooves). These are models in which the glass is installed in the cavity of the door leaf.
Paneled. In these models, the glass is inserted into grooves.

Paneled

In order to repair paneled panels, they must be almost completely disassembled into different parts. Many people are intimidated by the large number of parts that go into a door like this, but don't panic.

The structure does not need to be disassembled, but just opens access to the glass.

To do this, you need to know the design of such a door.

Support in a vertical position – side door pillars;
Transverse support – holds longitudinal parts and glass;
Panels are thin components of inserts located between the transverse elements;
The baguette part is the same transverse support, but serves as a decorative insert.

Many panel doors are made using the tongue-and-groove principle. They are very easy and simple to understand. Faced with such options, you will not have to clean the necessary areas of old sealant. After removing the damaged insert, a new glass is installed in the same place, and the door is assembled in the reverse order, after which it can be installed in its original place in the apartment.

Tsargovye

To replace the glass in a side door, it is also removed from its hinges and laid on a flat surface. After this, using a ruler and a chisel, you need to remove all the plugs located at the edges of the base. Using a screwdriver, remove all fasteners. Now you need to take a small hammer and a block and use them to separate the drawer over the entire surface of the canvas. This needs to be done from the bottom up.

After removing the drawer, you need to remove the old glass from the grooves along with the silicone (while wearing gloves, of course). At the end, you can safely install a new glass sheet of a suitable size into the grooves, place the frame in its original place, assemble the structure and install it on the hinges in the opening.

Panel

As a rule, glass in such traditional panels is installed on the sash using glazing beads (wooden fasteners). To replace the insert, it is better to purchase new parts, since the old ones can easily be damaged during installation or dismantling of the glass.

First you need to lightly tap the glazing beads using a screwdriver and a small hammer. You need to loosen the insert a little, but do not remove the fasteners. Then you should remove the glazing beads located at the top (only if the canvas is removed from the hinges).

After this, the remains of the old glass are removed. Do not forget about removing the previous sealing compound from the door leaf.

The new glass insert in such products is installed in the lumen, previously treated with sealant. If necessary, glass sealant can be used. Glazing beads are installed on top.

energy efficient house - construction principles

The main goal of building an energy-efficient house is to minimize energy consumption, especially during periods of winter cold. The basic principles of construction are as follows:

building up a 15-centimeter thermal insulation layer;
simple shape of the roof and perimeter of the building;
use of warm, environmentally friendly materials;
creating a mechanical rather than natural (or gravitational) ventilation system;
use of natural renewable energy;
the orientation of the house is in the south direction;
complete elimination of “cold bridges”;
absolute tightness.

Most Russian standard buildings have natural (or gravitational) ventilation, which is extremely ineffective and leads to significant heat loss. In summer, such a system does not work at all, and in winter, constant ventilation is needed to bring in fresh air. Installing an air recuperator allows you to use already heated air to heat the incoming air and vice versa. The recovery system is capable of providing from 60 to 90 percent of the heat by heating the air, that is, it eliminates the need for water radiators, boilers, and pipes.

Recuperation allows heat to be transferred from exhaust air to fresh air.

Detailed information on the construction of a ventilation system is contained in the article: supply and exhaust ventilation, principles of effective construction.

You should not build a house with a larger area than is needed for actual living. Heating of unnecessary unused rooms is unacceptable. The house must be designed for exactly the number of people who will permanently live in it. The remaining rooms are heated, including due to the heat naturally generated by humans, the operation of computers, household appliances, etc.

An energy efficient home must be built to take maximum advantage of climate conditions. A large number of sunny days a year or constant winds should be a hint for choosing alternative energy sources.

It is important to ensure tightness not only by sealing windows and doors, but also by using double-sided plaster, wind, heat and vapor barriers for the walls and roof. It should be taken into account that a large glazing area will lead to inevitable heat loss

How to remove the remains of broken glass from a door?

The answer is clear – carefully!

For this procedure you will need the following tools and supplies:

Thick, but not too thick gloves.
Chisel or wide slotted screwdriver.
Small hammer.
Thick paper.
Broom and dustpan.

Don't miss: Dimensions of a door frame for an interior door: algorithm and formulas for calculating sizes, requirements for door measurements

We put on gloves and, using a hammer and a chisel (screwdriver), loosen the fastening elements - glazing beads. We don’t take them out completely.

Important! In order to safely remove the remains of broken glass from the door, the glazing beads must first be loosened from above.

Now carefully remove the glass fragments. You should start with the largest ones. After removal, immediately place them in prepared paper and wrap them. Now you can remove the fastening beads.

If there is a rubberized gasket into which the glass is inserted, inspect it carefully. It may be damaged. In this case, you may need to purchase new spacer tape.

If some pieces of glass fell to the floor and broke, then use a broom to collect them into a dustpan. Try not to leave a single piece of glass on the floor. In this case, it is better to perform all work in slippers with hard soles or other shoes.

Tips: how to disassemble an interior door

Sometimes it happens that the type of door structure is a single piece made of glass and wood (for example, MDF) without the use of glazing beads or any other improvised means. What to do in this case? In this situation, in order to replace glass that has broken or been damaged in some other way, the doors can be completely disassembled.

To disassemble an interior door, you should use a screwdriver and other necessary tools. This is what the process looks like:

First, the door leaf is examined for the presence of special plugs. It is they who often hide various fastening elements (usually self-tapping screws).
Next, the structure can be removed from the door hinges and placed on the floor or other hard and flat surface.
Then all the plugs found must be carefully pulled out and the fasteners unscrewed. Moreover, it is not at all necessary to do this on both sides.
After the fasteners and plugs are removed, one of the door sides is removed, followed by the glass surface.
Next, new glass is inserted, and then the process of assembling the structure in reverse order.

How to fix loose glass in an apartment?

The glass in such door panels does not always crack or break. Much more often you can hear that it simply begins to wobble and make loud and unpleasant sounds. There are several ways to solve this problem without replacing the decorative insert:

You should purchase a special “sanitary” sealant, which is applied in a thin strip into the cracks formed between the insert and the wood.
Ordinary matches are inserted one at a time into the corners of the glass panel. Instead, you can use acrylic putty, which is also applied to the corners of the insert.
Small pieces of cork are generously lubricated with universal glue and inserted into the cracks around the perimeter of the glass.
You can also carefully remove the beads themselves, apply sealant to the glass, and reinstall them on top, but closer to the decorative panel itself.

All these methods for eliminating noise and movement of glass in doors really help get rid of the problem, and their implementation does not take much time.

Installation options

There are two main ways to replace glass in interior doors, and each of them, in turn, has two varieties:

Installation of a new insert with maintaining or increasing the size. In the first case, the cracked or broken glass is removed and a new one of the same size is installed in its place. This type of work is considered the easiest and fastest.
In the second case, after dismantling the damaged insert on the door leaf, he draws an image of a new one with a pencil, then measurements are taken, and then glass of a suitable size is purchased. Using a hacksaw, the desired shape of the hole is cut out, special grooves are made in it, and only then installation occurs. Such work requires special care in measurements and caution when cutting out a new shape in the door, otherwise you can only ruin the entire material without solving the problem.

Replacing an insert using quarters, non-standard work. Replacing cracked glass using quarters is a job that was previously described step by step. In this case, quarters are called parts of the glazing bead.
Non-standard replacement of the insert is considered much more complex and time-consuming. It is carried out in cases where the glass itself is inserted into the doors without using a bead. In this case, the process of installing a new decorative element will be as follows:
It is necessary to remove the plugs at the end of the door leaf and remove the fasteners.
The door is removed from its hinges and placed on a horizontal surface.
The side part of the door leaf is removed. Usually it is enough to simply pry it slightly with a chisel or a thin iron ruler. In the opening that opens, glass will be visible, which is easy to reach.
After removal, you need to install a new insert in the free space, and then secure the side bar.
The final stage of such a replacement will be assembling and hanging the door.

This non-standard installation option is similar to replacing glass in a side door, only it takes less time and is simpler.

There is another option for installing glass in an interior door. When performing this procedure, LED bulbs are additionally mounted in the insertion grooves, which light up when touched to the glass. Please note that only professionals can do this work.

By and large, replacing glass in interior doors is not such a difficult process. It is important to take your time and strictly follow the given tips during its implementation, then successful completion of the work is guaranteed.

Baguette for floating ceilings | PVC

Plastic baguette for floating ceilings (wall). The idea of a floating ceiling initially implies the creation of a halo on the wall from 10 to 20 cm. This is achieved by placing the light source at a certain angle. This was made possible thanks to the floating profile. The profile is offered with a special translucent insert, which has a special transmission layer (transmits 90% of light, blocks ultraviolet radiation, uniform dispersion). And also a unique advantage of the profile is the ability to install and dismantle the LED strip.

Material: PVC plastic.

Manufacturer: Russia.

Prevention

To avoid replacing broken glass material in the future, you must use the door carefully. Do not slam it when opening or closing it, as a strong impact may cause the canvas to become cracked.

Sources

https://ODveryah.ru/remont/zamena-stekla-v-mezhkomnatnoj-dveri
https://vitdoors.ru/dveri/kak-zamenit-steklo-v-mezhkomnatnoy-dveri-svoimi-rukami.html
https://gosfasad.ru/dveri/kak-razobrat-mezhkomnatnuyu-dver-dlya-zameny-stekla.html
https://dveri-provance.com/zamena-stekla-v-mezhkomnatnoj-dveri
https://oboiman.ru/inside/zamena-stekla-v-mezkomnatnoj-dveri-33-foto-remont-razbitogo-stekla-kak-vstavit-ili-pomenat-svoimi-rukami.html
https://okcomfort.com/dveri/zamena-stekla-v-mezhkomnatnoy.html
https://stroy-podskazka.ru/dveri/mezhkomnatnye/zamena-stekla/
https://gorodverey.ru/zamena-stekla-v-mezhkomnatnoj-dveri-svoimi-rukami.html
https://dekoriko.ru/dveri/mezhkomnatnye/zamena-stekla/

[collapse]
Post Views: 7,244