DIY smartphone stand made from stationery clips, paper (origami)

Who among us doesn’t like to watch TV series or movies while cooking something in the kitchen or eating? The phone is not a laptop; it will lie flat on the table. It is, to put it mildly, uncomfortable to look at something like that. You can buy a special stand to secure your phone in a vertical position, or you can make it yourself from scrap materials. For example, these could be ordinary office clips.

How to make your own phone stand from paper clips

There are several ways to make a stand from clamps. Let's talk about simple and more complex ones.

Method with two clamps of different sizes

What you will need to make: one large clamp and a second smaller one - medium or small. Nothing more is needed.

Buy two clamps of different sizes

You only need to connect these two office tools in a certain way:

1. We turn the smaller clamp handles in the opposite direction. We connect them with each other.
2. We place the two connected handles in a large clamp.

   Insert the handles of the small one into the large clamp

3. We put a homemade stand on the table, and put the phone on it. Adjust the base of the small clamp if necessary.

   Place the phone on the ready-made stand

The clamps may be the same size. Then you just need to connect them differently: bend the handles of one clamp in the same way and connect them, but place them in the other clamp, not them, but the base of the clamp itself. Place the phone between the handles of the attached binder.

The stand can be made from two clamps of the same size

Another method using clamps of the same size. We will additionally need a sheet of paper in it. Its width will be equal to the width of the clamps, and its length will be the height of your phone. Simply clamp the edges of the paper with clamps on both sides. The lower handles of the binders will be the base of the stand, and the upper ones will be the holders. Place your phone between the top handles.

Attach two clips to a piece of paper

One clamp method

If you only have one clamp, you can still make a stand out of it. The advantage of this option is that you can attach this stand to any object that will “take” the clip.

Additionally, you also need insulation from the wires (for the previous methods it can also be used). This is optional, but it is advisable to ensure that the paperclip does not scratch the phone. You also need a small piece of fabric and an elastic band (any kind, maybe a small one for hair or several stationery ones).

Insulation from the cable is needed to soften the landing of the phone on the stand

So, let's start assembling the stand:

1. Carefully remove the handles from the base of the clamp and bend their upper round parts inward using pliers (use a piece of fabric so as not to scratch the handles of the clamp). These folds will help securely secure the phone to the stand.

   Remove the handles from the clamp

2. We put the insulation on the handles, and insert the handles themselves back into the base of the clamp.

   Insert the wire into the insulation

3. If desired, we put the insulation (already cut) on the lower edges of the clamp base.

   Attach the handles to the base of the clamp

4. We fasten the handles of the clamp with an elastic band at the base of the stationery tool.

   Use a regular hair tie to secure the handles.

5. We insert it into the phone between the handles.
   Secure your phone to the finished cradle

Video: several options for phone stands made from office clips

You can build a phone stand from ordinary office clips. In this case, you can have at least two clamps, at least one. The easiest way is to take two clamps of different sizes and insert the connected handles of one binder into the base of the other clamp.

• Ekaterina Vasilyeva
• Print

Source: https://kompkimi.ru/sovety/eto-polezno-znat/podstavka-dlya-telefona-iz-zazhimov

Other ideas

What else can you make a phone stand from, available tools:

1. Sunglasses. Fold the arms and secure your smartphone in them. The glasses should be large so that the smartphone does not overweight and the structure does not fall.
2. Use non-slip car mats. Place them under the phone, and use any sufficiently large object as a stand: a box, a glass, etc.
3. Take 6-8 household clothespins. They should be smooth, large, and made of strong material. You'll also need a pencil. Clamp the pencil with clothespins, leaving a small distance in the center equal to approximately half the length of the device. Now place the clothespins with the pencil on the table, with the inner clothespins facing up. They will serve as a phone stand. The remaining clothespins hold the structure in place.
4. Build a phone stand from a regular sheet of thick paper (for printing) and a stapler.
5. The smartphone can be secured to any handy object using a stretchy elastic band.
6. Take an unnecessary case and glue it with double tape (only tightly) to a box or other item. Just insert your phone into the design when you are going to watch something.

If you often use your smartphone to watch videos, then buy a special stand. Or just look for a new convenient case with a lid so you don't have to worry.

DIY smartphone stand: use paper clips or paper

In the modern world, it is no longer possible to imagine life without smartphones. They can replace so many vital things: be a clock and an alarm clock, record an important conversation using a voice recorder, replace the good old player, camera, etc.

Even watching a movie on such a device is now commonplace; if previously the phone disappeared into the vast spaces of women's bags and men's pockets, now the place of the smartphone is on the desktop.

For more convenient use of this device, it’s good when you can make a smartphone stand with your own hands.

Everything you need to create your own stand can be found at home.

This is very convenient, because sometimes the desire to make something comes, but there is no desire to go to the store and specially prepare for such an event.

Below we will describe several instructions for making such a convenient thing as a stand for your smartphone. One idea is suitable for making even in the office, while the second is more domesticated.

The office is in use

Representatives of office professions know very well that there is more than enough office supplies in the workplace. Moreover, you can find everything from pencils and pens to office clips.

So I came up with an idea that is easy to implement and will definitely be useful.

Why not make a stand out of office clips? They look like this, and if anyone didn’t notice them before, now everyone will definitely pay attention:

Read this: Napkin cutting for children and their parents

• There are colored ones, small, large, as you can imagine, so you won’t have to complain about a monotonous black stand; by choosing colored clips, you will unknowingly improve your mood by looking at the bright and warm colors:
• For the first variation you will need only two large clamps.

Pay attention to the size of your smartphone; you may need smaller or larger clamps.

Tape them together using a piece of paper or cardboard, or any other flat thing, and the stand is ready!

If you want to watch something on your smartphone and charge it at the same time, then you will need four of the same clamps, they are fastened together as shown in the figure, and the charger is placed in the middle, this way the smartphone is held tightly and is in a comfortable position for charging.

Using clamps, you can come up with various options for fastening them together to create stands and holders; here you can only rely on your imagination. It’s quite convenient that all these structures can be quickly disassembled; when you get tired of it or need its elements, in a matter of seconds it will seem that there was no stand at all.

Paper technology

If the stand can be made from stationery clips, then you can also try from paper. For this you will need:

• thick sheet of paper;
• ruler (minimum 20 cm);
• scissors;
• pen;
• optional paints and varnish (water-based).

Read this: Creative DIY Gifts: Best for Creative People

Creating an interesting stand for a smartphone will take no more than 20 minutes; origami techniques will be used to make it. The result will be such an unusual thing.

The first step will be to mark on the sheet with a pencil or pen - whatever is at hand, a square shape of 20*20 cm. This is the size of the stand for standard smartphones. Next, cut along the contour and get:

You can use either a regular thick sheet of paper or a cover from a notebook, notepad, colored cardboard, etc. The format is suitable A4.

Next, the sheet is first folded horizontally in half, then vertically. The folds should be pressed down well so that they can be used in the future. Having finished with this, we unfold the sheet with clearly defined outlines of horizontal and vertical lines.

For ease of use, let’s mark where our left side is and where our right side is. We take the left edge and wrap it until it rests in the middle of the sheet.

1. We do the same with the right edge. As a result, we get a sheet that looks like this:

The next step is to create triangles from what we have so far. To do this, one of the corners, upper right or lower right, it doesn’t matter which one you start with, you need to turn it towards the middle, you get a diagonal line. Here we will need a ruler, since the paper in several layers becomes quite dense, it is convenient to smooth and align the fold line with a ruler.

Types of devices

Accessories have different configurations, they are divided into:

• Tabletop models. The stand allows you to conveniently place things on your desktop and maintain order.

• Hanging. They are used to recharge devices and free up space in the workspace.

By following simple rules, you will be able to create a stand for long-term use that will fully meet your current needs and look attractive.

How to make a phone stand: from binders, paper clips, paper

Modern communication devices perform many functions, so there is often a need to install a gadget on your desk. The easiest way is to purchase a ready-made device at your local store, or you can make it yourself. There are many ways to make a phone stand from scrap materials and office supplies.

What can you use to make a stand for a mobile phone?

The most common material used to make phone stands is plastic.

To make a smartphone holder with your own hands, you can use everything that is available in every home - paper clips and binders (clamps), wire hangers, paper, wooden planks and even a children's construction set. Self-made stands will not only be comfortable, but also original in their design and size.

There are several simple ways to quickly create stands that are functional and perfect for your gadget.

From stationery binders

Students and office workers are familiar with special clips for large stacks of papers, called binders. If you have holders, the easiest way is to make a phone stand with your own hands from them.

To do this, just connect 2 elements to each other, and bend 1 metal end towards the phone.

You can also fasten 2 binders using a piece of cardboard, and insert the smartphone into the plane between the metal ears. Despite its small size, such a device is capable of holding even a phone with a large screen diagonal both vertically and horizontally.

From Lego

If there are children living in the house, there will definitely be a plastic construction set with parts of different sizes and colors. There are no special instructions for making a phone stand; you just need to select the appropriate elements and connect them in any order. The main thing is that the design is stable and attractive.

DIY furniture restoration

From a paper clip

Of the many ways to make a smartphone supply, the fastest and easiest is the one that uses a simple large paper clip.

To make the device, you must first bend the clamp into a straight line. Then bend it again so that the middle part creates support for the back wall, and the edges in the form of hooks prevent the phone from sliding forward.

From a wire hanger

If you have a wire clothes hanger, you can make an original stand for your smartphone or tablet. All you need is pliers and a little patience:

1. First you need to bend both edges of the hanger so that they are located from each other at a distance equal to the width of the gadget. The edges are compressed with pliers until they are completely connected.
2. Make 2 folds at each end, about 3-4 cm in size.
3. At the next stage, the hook is bent at an angle of 90° and turned in the direction of the wings.
4. Then a hook is made at the end of the upper part, onto which the inner element of the hanger is hooked and fixed.

The design can be improved with rubber tubes, which will provide an anti-slip effect and make the product more attractive.

Shampoo bottle version

An empty shampoo bottle can be turned into a convenient and beautiful phone stand. The advantage of such a device is that it can be hung on the power supply of the charger and eliminate the risk of snagging the wires and dropping the gadget on the floor.

To make the holder you will need a plastic container of the required size, a marker and a stationery knife. First, markings of future cutting locations are applied to the bottle, taking into account the depth of the phone, the location of the holes for the plugs and the dimensions of the power supply.

After the layout is carefully drawn, all the lines are cut out with a knife and the edges are cleaned. If everything is done correctly, the holder can be easily placed on the charger plug and plugged into the outlet. The gadget itself will fit freely in the bowl, eliminating the bending of wires.

Restoration of Soviet furniture

To make the device look more attractive, its surface can be covered with fabric or bright paper, and painted with paint suitable for plastic. The advantage of this stand is that it is inexpensive, since it uses discardable material. In addition, a wide range of colors and container sizes are available.

Popsicle stick version

Don't rush to throw away popsicle sticks. You can also make a beautiful phone stand out of them. Depending on the project, the design consists of several elements or includes a dozen components. You can glue the sticks together with PVA or a glue gun. After the holder is ready, it is recommended to paint or varnish it.

From paper

One of the most common materials used to make a DIY smartphone stand is paper or cardboard. If designed correctly, the product will be quite strong.

The easiest way is to create 2 triangular blocks of different sizes. One will serve as the base, the other will support the bottom end of the phone. After the blanks are completely dry, they are fixed on 1 paper rectangle.

Thanks to the ease of processing, you can create an unlimited number of drawings and diagrams. As a result, the stand will meet all the manufacturer's requirements. Even if mistakes were made, redoing everything will not require much physical effort or capital investment.

Made of wood

Even the most basic woodworking skills can make a phone holder from a simple piece of wood. The product will look great on your desktop or bedside table. It can take on various shapes and sizes. The main thing is that the stand area compensates for the weight of the smartphone and does not tip over.

First you need to cut out the workpiece, carefully sand the edges to remove burrs and smooth the surface.

Then, closer to one of the edges of the board, you need to use a milling machine to cut a groove with a thickness corresponding to the gadget. Depending on the purpose, the groove can be located at an angle or perpendicular to the base.

At the end, it is important to sand the surface of the groove so that the screen and housing are not scratched during operation.

DIY kitchen faucet repair

To make a DIY wooden phone stand look more aesthetically pleasing, it can be painted or varnished.

What do you do with old furniture?

Source: https://VseMe.ru/svoimi-rukami/podstavka-dlya-telefona

What to consider when choosing a stand type

When planning to assemble a phone holder, you need to understand:

• whether the structure is planned for temporary or permanent use;
• does its external aesthetics matter?
• will the material support the weight of the device;
• How safe is the option for the phone and its owner;
• If we are talking about a complex and intricate stand, it is important to understand whether there is enough time and skill to implement the plan.

Having decided on these parameters, you can begin to select the optimal model.

To summarize: there are several ways to make a phone holder for your home or office. The choice of material and type of construction is determined by the parameters of the phone, as well as the preferences of its owner.

Origami phone stand

Quickly and easily create a convenient mobile phone stand out of cardboard using the origami technique.

The entire manufacturing process will take you 10-15 minutes at most, as a result of which you get a nice and practical little thing.

Necessary materials:

1. sheet of cardboard; 2. ruler;3. handle;4. scissors;5. red paint (I took watercolor);

6. glossy water-based varnish.

• Manufacturing process
• Step 1: Cut out the paper

Take a sheet of cardboard and cut out a square measuring 20x20 cm.

Instead of the usual colored cardboard, I took a cover from a children's stationery, deciding to experiment with colors and make a multi-colored craft. Looking ahead, I’ll say that I didn’t like the result, and to make the stand prettier, I painted it red with watercolors.

1. Step 2: Fold a Square

Crafts for children

Children love to make things with their own hands together with their parents. Options for crafts made from clothespins:

1. Funny toys. To make this craft, you will need a clothespin and an image of the animal's face on thick cardboard. You can draw a picture yourself or print and cut it out. Next, the drawing is cut in half. One part is glued to the top board, and the other to the bottom (side). If you click on the toy, the image will move.
2. Furniture for a dollhouse. Wooden clothespins make excellent doll furniture. There is no need to saw anything. Arm yourself with glue and assemble tables, chairs, and a bed from pieces of wood in the manner of a designer. Be creative or use the idea in the photo.

3. Jewelry for girls. Little fashionistas will be delighted with handmade beads and earrings. To make it you will need Moment glue, paints, various beads, laces, hooks for earrings and the clothespins themselves. First you need to disconnect the metal brackets. The wooden parts should be glued together, as in the photo below. Then you need to pierce holes along the edges with an awl and insert a lace. Now you can color the necklace to your liking. How to make earrings from clothespins is shown in detail in the photo.

Phone stand made from paper clips

In 5 seconds you can make a strong and sturdy stand for your phone. Moreover, it is very cheap, two clamps cost me 10 rubles, and in general I think this is pennies for you.

Step No. 1 Materials for the stand

All you need are two clamps: one large and one smaller. You can buy them at any office supply store.

• Step No. 2 Assembling our phone stand
• Open the large clamp and place the handles of the small clamp into the large one as shown in the photo below.
• Step #3 Place your phone on the stand you just made.

Due to the fact that the stand is made of only 2 small and lightweight parts, you can carry it with you everywhere, I always carry it with me in my pocket.

Source: https://wdfiles.ru/blog/podstavka-dlya-telefona-iz-zazhimov-dlya-bumagi.html

Roll hanger

The most budget-friendly and simplest way to use a holder is to use a holder made from a regular clothes hanger. The hangers should not be plastic, but made of strong wire.

How to do:

• We take old hangers, unbend them and put on a roll of paper towels.
• The hanger can be decorated at your discretion: wrapped with decorative braid or pre-painted with a spray can.

How to make a smartphone stand from paper clips with your own hands

A paper clip has long been used not only in the office, but also in everyday life. One of the non-standard solutions is making a stand for a smartphone.

All options for using binders as stands are very practical. They will help the smartphone owner comfortably watch videos, read, and also take static photos. To create a clamp, clamps of different sizes are used, but most often large ones. There are both the simplest ways to secure your phone, and quite intricate ones.

Sometimes auxiliary materials are used, such as rubber bands or paper. Additional precautions are recommended for some stand versions:

• To prevent the metal ear of the binder from scratching the phone, you can use insulation removed from the wires. To do this, you need to disassemble the clamp.

• A simpler option is to tightly wrap this bow with soft threads.

Simple one-clip stand

To install the smartphone in a position convenient for viewing, one large binder is enough. This is the fastest way, but it cannot be called gentle.

Option of two large binders

Binders of the same size are connected to each other using different methods, with a practical result obtained in all cases.

Method of binders of different sizes

To make the stand you will need one large stationery tool and one smaller one.

Using clamps and rubber bands

Rubber bands for money not only further strengthen the structure, but also prevent the smartphone from sliding. Depending on the options, you may need one or more rubber clamps.

Tools

To make the simplest version you will need the following:

• pliers;
• Super glue;
• paper clips (2 pcs.);
• plastic card or something else of similar size.

We have listed only the minimum that is required to manufacture the device. To create a presentable appearance, beautiful fabric, non-slip materials, rhinestones, leather, etc. are used. In addition, craftsmen sometimes use special clips or elastic bands to additionally secure the smartphone.