How to make a threshold at the front door? 26 photos Recommendations for installing and finishing the door threshold for interior metal aluminum doors and PVC models in an apartment

Types of multi-level interior thresholds

Depending on the material from which the thresholds are made, there are:

wooden;
plastic;
metal;
from laminate;
concrete.

Wooden thresholds

The most common option in residential buildings is a wooden threshold. The wood from which the structure is made must be sufficiently dense, strong and wear-resistant, since it bears a fairly large mechanical load. It could be oak, beech, etc.

Wooden multi-level interior threshold

Plastic products

This is the cheapest option. Thresholds are available in different colors, so choosing the right color strip is not difficult.

Metal thresholds

These are the most wear-resistant products, their service life exceeds 10 years. Different metals are used to make them. On the construction market you can find structures made of steel, brass, bronze, and aluminum.

Metal interior multi-level threshold

Stainless steel structures have a beautiful silver color with a glossy or matte finish. If the threshold is made of ordinary steel, then it is periodically painted. On the construction market there are thresholds with anodized coating.

Bronze thresholds for interior use are quite expensive and can only be made to individual orders.

Brass is also an inexpensive metal. Products made from it have a beautiful golden color.

Depending on the method of fastening, there are different levels of thresholds:

with open mount;
with hidden fastening;
self-adhesive.

Threshold with hidden fastening for multi-level rooms

A threshold with an open fastening differs from a product with a hidden fastening in that in the first case the heads of the screws that secure the strip are visible.

When installing self-adhesive structures, fastening is done using an adhesive substance that is applied to the bottom of the plank.

Threshold fixation method

Thresholds can be attached in different ways. There are several ways:

A special strip made of metal and fixed using through mounting is secured with self-tapping screws after laying in the joint. This method is quite easy, but its main advantage is reliability.
The H-sample profile must be installed as follows. To begin with, you need to place it on its side. There should be a laminate in one groove, and a tile covering in the second. Afterwards, it is important to grout the tile joint, and apply silicone sealant to the laminate joint - a viscous composition based on silicone rubbers.
There is also another type of thresholds - a collapsible H-shaped profile, consisting of two T-pattern strips. Fastening is carried out as follows: the lower element is fastened along the joining border, after which the decorative part is installed using a clamp.

What should I do after installing the door device?

Before installation, you need to determine the area of the future threshold. In terms of design and functionality, products differ in:

height;
materials;
installation features.

Calculation

The calculation is made based on the design solution. High thresholds with a thickness of 2 cm or more are suitable for entrance doors. The optimal thickness of a low aluminum threshold is 30 mm. The following quantities are involved in the calculations:

width of the opening between the slopes;
the distance between the floor covering and the edge of the lower vertical strip of the box;
the distance from the edge of the lower vertical of the box to the end of the sill protrusion;
thickness of decorative elements.

The threshold can fill the entire width of the opening between the slopes. For accurate measurements, it is recommended to use a building level. When measuring the width along the slope, use 5–7 cm increments to avoid inaccuracies. If the plank is fixed in the grooves, then 2 cm is added to the width (1 cm on each edge). Calculations will help in choosing factory products or formwork.

Attention: Measurements are taken after dismantling the old covering and installing the door frame, if the threshold is not calculated at the project preparation stage. The surface is cleared of large debris, stones or sand.

Selection of the necessary materials and tools

To install a metal or wooden profile, you will need a hacksaw for wood or metal.
For installation - a screwdriver, hammer, nails and screws.
To form a concrete structure - formwork, primer, spatulas.
To treat a wooden threshold you need to select a protective coating.

When choosing a material, the load, type of room, and finish of the opening are taken into account. Before deciding how to seal the opening, you need to consider the following recommendations:

decorative dies are selected depending on the texture of the door frame or floor covering (wood, tile);
for rooms with high humidity, moisture-resistant materials (concrete, metal) are needed;
It is not recommended to use plastic strips as the main profile, as they are short-lived;
consider the type of fastening of the plank (external or hidden), where products with internal fastening are more aesthetically pleasing;
in private houses, it is better to pour a concrete threshold at the entrance door;
take into account the load and traffic when selecting durable materials for entrance doors.

Decorative planks made of wood are more demanding to maintain, but are more durable than PVC. Moisture-resistant structures must be supplemented with a cork compensator. To seal the holes you will need putty. If the decorative material is light enough to be mounted with glue, use tile adhesives.

Advice: To insulate a high entrance threshold, you need to prepare materials such as mineral wool and reinforcing mesh.

How to install and cement?

Initially, the surface is cleaned of contaminants.
The high threshold is formed from concrete or brick in 1–2 rows.
The brick is laid on cement and periodically tapped with a hammer to compact it.
Then the masonry is framed with cement mortar.

Stages of installing a high concrete threshold:

prepare a wide formwork from plywood or timber;
wrap the formwork with cling film or treat it with grease to make it easier to separate from the concrete;
support the beam along the side walls perpendicular to the slopes;
if the height of the threshold is above 7 cm, then install longitudinal metal beacons to level the mass;
lay a layer of mineral wool, secure with a reinforcing mesh with a cross-section of no more than 50 mm;
prime the surface in 1–2 layers;
pour concrete into the formwork or pour it onto the current foundation;
level the concrete with a rule or a wide spatula;
leave to dry for 2-3 days, periodically sprinkling with water.

After drying, the formwork is removed and the surface is decorated. For a low threshold, take aluminum strips, which are fixed in a hidden or external way, when the heads of the screws are visible.

Installation steps:

install the threshold, make markings around the perimeter;
mark the locations for the holes in the plank;
drill holes in the floor according to the finished markings;
hammer in the dowels;
secure the bar with self-tapping screws, recessing the caps into the base.

With the hidden fixation method, self-tapping screws together with dowels are inserted into the longitudinal groove of the plank. Then the threshold is fixed on the base and tapped with a hammer through a sheet of plywood or timber.

What types of structures can be installed in an apartment?

Thresholds are classified according to the materials from which they are made:

Some specific types are made from cork and PVC.

Metal

To decorate metal structures with your own hands, use alloys from materials such as:

Aluminum profiles are more popular:

Such planks are not distinguished by aesthetics, they have a sliding surface, therefore they are decorated with corrugated elements made of wood or plastic.

Advantages of metal thresholds:

Installation of a metal profile does not require skills or special tools, since it is simply fixed with self-tapping screws. To secure low planks, it is permissible to use tile adhesive.

Wood

To decorate the threshold with wood, you can use only hard types of wood, such as:

Their range is large: it’s easy to select by texture, color, pattern. The tree is beautiful, but difficult to care for; it requires periodic renewal of the protective coating and frequent cleaning.

Advantages:

Wooden planks can be made independently from hardwood timber. Disadvantages include the need to renew the protective coating, periodic painting, and vulnerability to moisture.

Concrete

More expensive, but the most durable option. Concrete thresholds are difficult to install and are poorly suited for installation in openings with built-in doors. Installed at entrance and balcony doors. Peculiarities:

If chips or cracks form in the concrete base, complete dismantling of the coating and doors is required. Optimal for finishing thresholds in private homes. The threshold must be filled with a mixture of cement and sand with the obligatory addition of a plasticizer, as it is necessary to impart plasticity. High thresholds can be constructed of brick.

Advantages

Most modern households accept it as an object that performs a specific function.

Here are some opinions on the usefulness of this component:

Helps reduce noise. This is true. However, it is also necessary to take into account the noise absorption of the door leaf itself. It is higher on a solid wooden door than on a hollow one.

Door without threshold, photo

When cooking, the kitchen door prevents oil smoke from entering other rooms. Here we recommend purchasing a good hood over the stove or a fan with natural circulation.
Protects from draft and dust. You can't argue with that!

From all of the above, it is clear that installing interior doors without a threshold in the kitchen is quite acceptable. If alternative solutions to problems with sound insulation and air penetration through the gap under the door do not suit you, then use thresholds. It can be retractable, floating and so on.

How to cover with laminate and other materials?

Concrete and brick structures need decoration. To refine the structure, you can use materials such as:

The cladding is carried out in continuous slabs or in fragments. The concrete is pre-treated with concrete contact. Tile adhesive or cement-sand mortar are suitable for fixing.

How to sheathe the threshold:

Before installation, the area of the base is assessed. A marking with the future pattern is created on the plane or a panel of a suitable size is selected. Fragments of finishing are cut according to the finished markings.

The texture of the cladding is matched to the pattern of the material of the door frame, slopes and trims. When choosing wood, it is important to consider the direction of the pattern.

The threshold at the entrance doors protects the door slopes from external influences. Having selected materials and performed calculations, you can beautifully decorate the entrance area. Concrete and brick bases at the entrance doors are decorated with available building materials, which opens up scope for the implementation of most design solutions.

What are the types of thresholds for interior doors?

The first and very common type is wooden thresholds. This material is excellent for the manufacture of such products, since wood is not very expensive, and if handled correctly it can last quite a long time. You can purchase a finished product at any hardware store, but you can also make it yourself using a wooden beam. For these purposes, hard wood types should be used; oak is the ideal option. Wooden thresholds can easily fit into the interior of any room and are suitable for any floor covering. The only inconvenience is the need to constantly update the protective coating. Otherwise, the product will quickly lose its appearance.

Metal thresholds. The main advantage of these products is their very wide range. The modern market offers a choice of thresholds made of various metals, for example, aluminum, brass and stainless steel. Metal thresholds are very often installed at entrance doors, but you can install them in the interior space. Interior metal thresholds are a fragment of a profile. Such products are installed using fasteners or special clamps. Installation of aluminum thresholds will not take much time and effort.

Plastic thresholds. The cheapest option. Low cost is the only advantage. Such products do not look very attractive and wear out very quickly. Therefore, they are most often used in office premises or shops. Installing plastic thresholds is a very simple operation, so you can safely do it yourself.

Plastic threshold

Concrete or stone threshold. These interior elements are very expensive and difficult to install, especially if the old doors remain in place and only the threshold is changed. These interior elements are most often placed on the entrance or balcony door. To create a truly strong and reliable threshold, you should use a cement composition with special additives. Such an element can last up to fifty years.

Cork thresholds. The main advantage of such products is the ability to remain in conditions of high humidity for a long time. Similar elements are used in swimming pools, baths, bathrooms, etc. Also, these products can withstand temperature changes very well.

Laminate thresholds. Such products can only be used with laminate. The main advantage is simple and quick installation. The result of installation is a completely smooth coating. The disadvantage is deformation under conditions of sudden changes in temperature in the room.

Laminate threshold

Return to content

What to consider when choosing a threshold

Before purchasing, you should be sure to calculate the length, width and height of the product, since the highest quality camouflage of the joint located between the tile and laminate floor coverings depends on this.

Execution materials

When choosing raw materials, it is necessary to take into account the conditions in which the door threshold will be used.

The tasks that will be assigned to this element of the front door are also taken into account. There are enough materials for execution, but each of them will behave differently in the same circumstances

Metal

Perhaps this is the most reliable and durable material. Conventional steel is used extremely rarely and, as a rule, for industrial facilities. In residential premises, various alloys are mostly used. This is brass or stainless steel. But aluminum is very popular. It is easy to care for and very resistant to abrasion. The only downside is its slippery surface. Therefore, it is decorated with corrugated elements. They can be made of rubber, wood or plastic.

Advantages of metal thresholds:

Used for any premises with high traffic;
Not afraid of high humidity;
Simple in design;
Preservation of all characteristics with a sufficiently long service life;
Finished products have a large selection of sizes;
Easy to install;
Not afraid of corrosion and mechanical stress;
Low cost.

For interior passages, low thresholds are made (up to 2 cm). Some of them can even be installed with tile adhesive. A balcony or front door requires taller structures that are fixed with self-tapping screws. This is not difficult and anyone can do this work on their own.

Tree

Wooden thresholds are very popular in residential areas. For the front door, only hard wood should be used. You don’t even have to buy the planks, but make them yourself from oak or aspen. But store-bought products are not expensive and have a very wide range, differing in color and texture.

Advantages of wooden thresholds:

Environmental friendliness;
High insulation characteristics;
Easy to install;
Compatibility with laminate and linoleum;
Sufficient strength;
Low price.

But the material is sensitive to high humidity and is not recommended for installation outdoors or for bathrooms. True, if it is pre-treated with protective compounds and painted, then it copes with all tasks no worse than others.

But the wooden threshold has proven itself best in interior transitions. There is no need for serious processing and you can only use clear varnish. It will best highlight the beautiful texture of wood and the element will act as a good decor.

Concrete

One of the most durable options, but also the most expensive. As a rule, they are installed at entrance or balcony passages. Optimal for the private sector, where you can often see a tile threshold. A concrete base is poured at the front door and then lined with decorative material.

Features of concrete structure:

Suitable for high traffic openings;
Great durability (up to 50 years);
Excellent waterproofing properties.

Concrete thresholds for the front door are extremely rarely left without decoration. They are usually covered with ceramic tiles. You can find laminate and wood finishes. But a simply painted concrete surface looks decent.

Most often, the threshold is made before the doors are installed. And for its production, a plasticizer must be added to the cement-sand mixture. This reduces the formation of cracks on the surface and extends service life.

But if chips do occur, then in most cases their covering will be only temporary. A serious crack indicates a violation of manufacturing technology and a complete rework of the threshold will be required.

Concrete is rarely used in interior passages. It can be seen, perhaps, only in the bathroom. In other premises it is not only unprofitable, but also of little aesthetic value. Under some circumstances, the threshold is made of brick. This can be seen especially often if it is multi-level, in the form of a staircase.

You can recall some examples of making plastic thresholds. But this material is fragile and is afraid of sunlight. You can find it when it comes complete with a metal-plastic door.

Metal threshold fastener

The first step is to make calculations: find out the thickness of the tile and laminate coverings, also taking into account the adhesive layer and the lining (thin sheet or roll material used as an additional layer on top of the base).
Next, you need to independently give the threshold the required bend.
A cut of the selected size is made. This is done using a grinder or a metal hacksaw.
The profile has pre-made legs designed for attachment to the coating, which means that installation is best done in conjunction with tiling. Thanks to this, the paws will be able to rest against the tile (on the surface of which glue is applied), while on the other side you can freely insert the lining and laminate.
Laminate flooring is laid with a gap of 5 millimeters.

Installation procedure

If a new door threshold is installed to replace a worn one, then the defective element of the opening is dismantled; the work area must be thoroughly cleaned.

The interval between the frame posts is measured and the specifics of attaching the threshold to it are determined. For example, for wood you will have to take into account adjustments for the arrangement of the tongue-and-groove connection. Based on the measurement, the length of the workpiece is calculated.

Control of horizontal base. The threshold should lie strictly parallel to the top of the door block. Otherwise, problems will arise when opening/closing the door. Leveling the surface is easy to do by arranging a screed. Wedges will also help to raise the edge of the threshold if it is wooden. Regardless of the technique, it should eventually take a horizontal position.

Marking the opening. The recommendation on how to make an entrance door threshold in an apartment is clear - fix it on the concrete floor using anchor bolts or self-tapping screws with dowels. In a private house made of wood, fastening can also be done with nails. The optimal distance between hardware is 100 mm.

Installation of the threshold, alignment of its position relative to the horizon and fastening in place. The gaps between it and the floor are sealed (mortar or sealant, depending on the materials of the opening element and the base).

Surface design. Finishing a wooden threshold involves installing a covering metal frame. You can take a piece of channel of the appropriate width; sheet iron with which the block is beaten. In terms of decoration, painting steel is not difficult. But given the increased abrasion of this part of the opening, it is advisable to use stainless steel. As you know, white color belongs to the category of neutral, and therefore this finishing of the threshold for the door at the entrance will suit any block structure.

If the site was arranged during the installation process, then it must also be prepared. When applied to a concrete base, tiles at the front door will come in handy. The range of these products is large, and choosing an acceptable shade and texture is not difficult.

The threshold for a private house can be built from brick or concrete; strength and durability will be ensured. But in any case, you will have to work with the solution and import materials (for the same formwork). A simpler solution is to buy a ready-made threshold; in furniture stores they are sold in various modifications. But installing such an attractive structure as a guillotine on the front door is impractical. It is installed into prefabricated panels using special tools, and given the complexity, this work cannot be done competently on your own.

For a private home, the technology described is in most cases quite sufficient. There is a choice of both materials and technical solutions. And most importantly, you can implement them yourself.

Making a threshold for the front door - installation procedure and design options

This element of the door block, which many people forget, performs not only a decorative function. Its main role is to increase the level of sound insulation, reduce heat loss and prevent dust from entering from the street. Therefore, the issue of independently arranging a threshold in the opening at the entrance to a private house or apartment should be approached consciously and rationally.

Types and device

Thresholds are of the following types:

Entrance – installed at the entrance to the house (apartment, building);
Interior – mounted in the opening in the bathroom or shower room. Many people do not understand why a threshold is needed inside the apartment at the entrance to the bathroom. It's very simple: if a water breakthrough occurs in a given room, it will become a boundary that will not allow flow into the rest of the apartment. Some install this limiter in order to isolate the entire apartment from excess moisture coming from the bathroom. In addition, no one forbids installing a threshold in the hallway or near the doorway in the kitchen;
On the balcony - this is a necessary element, as it retains heat in the apartment and prevents dust from getting inside. In this case, the threshold from the outside should be, first of all, functional, and from the inside – beautiful and matching in design with the overall design of the room.

Among the types of this design, there are models with an interesting and unusual name - guillotines. They are attached to the end of the door. When the door closes, they move down and completely tear off the gap between the floor and the door.

Some doors are already sold complete with a threshold. Which is very convenient, since you don’t need to waste time searching for the required copy. If such an element is not available at the door in finished form, it can be purchased separately and installed independently.

The range of construction stores is quite diverse. Finding the right product is not difficult. On sale you can see thresholds made from inexpensive materials as well as quite expensive ones. Thresholds are made from the following materials:

Wood is an inexpensive option. There are both interior and entrance wooden thresholds. Its quality depends on the type of wood. Oak, pine, and hornbeam are considered the strongest and most wear-resistant. A special feature of wooden models is the need for careful care and annual painting. Plus - wood is easier to install.

Are thresholds insulated and what is the best way to do this?

The energy efficiency of a room largely depends on the thermal insulation characteristics of the door structure. The threshold deserves special attention, as it creates cold bridges, causing condensation and icing to appear at the bottom of the door. This is due to the presence of gaps, a weak sealing contour and the cold properties of most of the materials used. Insulation will help correct the situation.

On wooden structures, the gaps are closed with a foam roller wrapped in leatherette, as when insulating doors. An insulating tape made of rubber or fleecy material is installed in the plane of the connector.

It is recommended to insulate a hollow metal profile by filling it with polyurethane foam after installation. Polyurethane foam has high insulating properties and retains its properties for a long time.

What are thresholds for?

As you know, laminate flooring needs to be laid indoors with a gap from any enclosing structures - walls, door frames, columns, etc. This is due to the relatively large coefficient of change in the linear dimensions of the flooring material due to temperature and humidity changes. For this reason, experts advise laying laminate flooring separately in each room, and forming a kind of expansion joint between rooms in the doorway. This will allow you to avoid swelling of the coating in the future, compromising its integrity and geometry.

There is one more important note in the instructions for laminated parquet - the area of the solid coating should not exceed 30-100 m2 (depending on the density and size of the slab). That is, every 5-10 m in the room it is recommended to make an expansion gap

Limit laminate area and seams.

The resulting compensation gaps are decorated in several ways. The most famous of them are transition profiles or thresholds. Their purpose:

Smoothing out differences in floor level or creating a neat transition from one type of coating to another;
Protection of the ends of the laminate from dirt, chipping, burrs and other damage;
Leveling seams at joints with a decorative effect;
Creating a zoning effect.

Thus, thresholds are useful finishing profiles that can be used both for their intended purpose and for the implementation of various design ideas. Available in the following sizes:

Width from 1 to 12 cm;
Length from 0.9 to 3 m;

Threshold design

In addition to moisture, other types of debris and dust can also get into the gap between flooring materials. In addition, the threshold is able to withstand other influences that could have a detrimental effect on the joint if there were no threshold there.

However, in addition to this, it is important to know how to design this very joint. It does not have to be in the doorway.

The connection profile may also be needed in other places, so it is useful to learn about other variations. What are the thresholds? They are an integral part of the designed space.

Types of thresholds

Any hardware store offers a wide range of these products. They may differ in shape, material of manufacture, and so on.

Thresholds can be made of the following materials:

Tree. The products are not very expensive, but at the same time they have a fairly long service life. You can make it yourself from timber or buy it ready-made at a construction supermarket. It is best if this piece is made from oak, but other hardwoods will work. It, of course, can be installed separately, but it is better if the door frame with a threshold is assembled and installed. Such an element must be regularly restored and protective coatings applied.
Plastic. The most affordable option, but the product very quickly loses its decorative properties and wears out in a very short time. This interior element will be more useful when arranging a store or office. They are easy to install.
Stone or concrete. Quite expensive products. It is difficult to install, especially if the assembly and installation of a door frame without a threshold was carried out much earlier. Products made from durable materials in the apartment are placed at the entrance to the balcony. In order for a concrete threshold to last for several decades, you cannot skimp on the quality of concrete. Special additives are added to it for greater strength.
Cork. Such products have a great advantage: they are not afraid of high humidity for a long time. High temperatures also do not harm cork elements. Therefore, it is good to install such a threshold in baths and swimming pools; they are also suitable for the bathroom. Also, cork dividers, due to their flexibility, help hide significant differences in floor levels.
Metal. They can be made of brass, steel, or aluminum. Their range is wide. Aluminum products will cost less than steel or brass. More often, such an element is mounted at the front door, but it is also suitable for interior doors. It is easy to install; it requires fasteners or clamps. In fact, it is a small fragment of a metal profile. Therefore, if you installed a door frame without a threshold, installing it yourself will not be difficult.
Laminate. It is good to install such products if there are laminated boards on the floor. It is very simple and quick to install, you can do it yourself. Get a beautiful and even coating. Laminate has one drawback: it deteriorates with sudden temperature changes and is susceptible to high humidity.

Thresholds are mounted on the front door or on the interior frame. In the first case, they perform a protective function, retain heat, and prevent noise and dust from penetrating into the room. Indoors it is more of a decorative element. But a separator in the kitchen prevents the smell of cooking food from penetrating into the rest of the room.

If rubber elements are installed on the threshold, the door will close much more quietly.

Why is it needed?

In many cases, a threshold at the door is needed to complete the design of the entrance space. Decorative strips are used only for interior passages. Street doors simply require the installation of this element to protect the room from dust and dirt.

But there are also rooms inside the house for which it is recommended to install a threshold at the entrance. This is a bathroom, due to the high humidity in it. In the kitchen it is required to avoid the spread of odors from it throughout the apartment. On the balcony door it is needed to protect the room from street dust.

Functions that the threshold performs:

But in most cases, the element is necessary to level out floor differences between rooms. The threshold at the front door is needed as a transition from a lower street surface level to a higher one in the apartment. It also helps protect the premises from intruders. The design may have a groove into which the bolt of an additional lock embedded in the door fits.

Types of products: purpose and material of manufacture

Wooden threshold of adjacent rooms

It is permissible to classify floor thresholds according to two main types regarding the purpose of the location:

Entrance door threshold.
Interior door thresholds.

The presented two design types differ from each other not only in purpose, but also visually.

If a door with an entrance threshold is designed to protect the internal microclimate from negative external influences. That said, interior delimiters and the exclusion of rooms that were listed above for mandatory installation may not be of great importance.

It is worth paying attention that if many door blocks in their design have a threshold as a single composite frame, then in its absence it is worth taking care of the correct design of the joints of the floor coverings or the difference in floor levels. If absolutely necessary, if there is no elevation in the door structure, it is recommended to use aluminum or plastic universal elements

You can buy thresholds as a separate part in any construction or other specialized store

If absolutely necessary, if there is no elevation in the door structure, it is recommended to use aluminum or plastic universal elements. You can buy thresholds as a separate part in any construction or other specialized store.

One of the types of interior threshold

It is possible to buy thresholds for the floor from a wide variety of materials, which will not go against the basic design of the room:

Wood, as the most common and affordable raw material, is used to make thresholds for both interior and entrance purposes.

The choice of wooden room dividers is unlimited. You can choose an element made of pine or opt for products made of solid oak.

It is worth noting that preference when selecting material should be given to oak. This product is characterized as wear-resistant.

Metal products are presented in a wide variety of manufacturing forms.

For different types of premises, it is permissible to select a part made of stainless steel or brass. Aluminum thresholds are even used as a decorative component when designing the joints of floor coverings and steps.

Multi-level aluminum threshold

Plastic products are not endowed with a high level of wear resistance, so it is preferable to install them in buildings for private use, and as interior parts.
Many people may associate concrete steps with house steps. This is a little different, since balcony openings in apartments are often equipped with concrete risers.

The material used is specialized concrete with non-shrinking characteristics and special additives to it, which provides not only strength during operation, but also elasticity of the product. In addition, concrete elevations can be finished with tiled masonry, sheathed with laminate, and so on.

Types of concrete thresholds with various finishes

Cork material is often used in situations where it is necessary to highlight a clear difference in floor levels in a room in a favorable light. The flexibility and elasticity of the material allows it to be used in the most difficult situations.

As for the methods of installation and fastening of the products in question, a wide variety of methods can be used here, which are characterized as:

fastening of open type of installation;
hidden fastening thanks to special inserts.

Flexible universal threshold of hidden fastening type

Now we know virtually everything about opening transitions; we just need to choose the most suitable option for our personal type of use.

(Your vote will be first)

Loading…

Concrete construction technology

Before pouring the entrance door threshold using cement mortar, prepare the following materials and tools:

putty knife,
construction plumb,
hammer drill,
primer paint,
formwork,
knitting needle
components for concrete mix,
paving slabs.

To ensure strong adhesion of concrete to the floor screed, the surface is treated with a primer. For a small step, wooden formwork is made in accordance with its dimensions.

Installation Features

It is not necessary to contact specialist craftsmen in order to make a threshold indoors. You can do the installation yourself, but you must remember that the standard height of this product is 30 mm. There is only a slight deviation from the norm, up or down.

In order to begin work, you need to make sure that the surface of the future threshold is smooth and dry. If this is not the case, the defects need to be corrected so that the finished product does not warp or become deformed.

It is better to make input options from the most durable materials. Using brick and concrete, you can make a threshold for the front door. Since concrete is a liquid substance, it is necessary to make formwork for it (from old or unnecessary boards), which is subsequently cemented with a compound. With this approach, it will not stand out from the general appearance of the room opening.

When installing a wooden threshold, the work algorithm is somewhat different.

The procedure for mounting it is as follows:

The length and width of the structure are measured;
The materials for the threshold are prepared (they are sawn into pieces);
Grooves are cut into the boards (the height of the boards should correspond to the height of the future step);
The distance through which the nails will be driven is calculated (usually it is 10 cm);
The surface level is checked using a building level. It should be smooth;
The threshold is fixed with nails (screws);
The final finishing of the threshold is being carried out.

When constructing a threshold in front of the balcony door, the same materials are used as for the front door. The work is carried out in the same way.

When installing the threshold, the length of an adult’s foot is taken into account so that using the step is comfortable and the foot fits completely on it. In some cases, the construction of thresholds begins by first finishing the threshold in the room, and then installing the rest of the step outside.

Laying paving slabs on the porch of a house

As one of the design elements of the facade of the building, a properly laid porch made of paving slabs serves not only as a beautiful confirmation of the respectability of the owners, but is also a durable, easy-to-use part of the entrance group. An accompanying option - ceramic tiles - allows you to arrange the porch in your personal individual style. And you can do all this with your own hands, without involving outside specialists.

To decorate the porch of a house with paving slabs, one of two technologies is most often used:

Decor

Finally, decorative finishing is performed. The appearance of the threshold adds aesthetics to the opening and increases the service life of the product itself.

The coating depends on the material used to make the threshold. Wooden products are coated with varnish or special means to protect wood. Sometimes they paint.

Using ceramic or laminate tiles, you can decorate a concrete threshold.

Decorating with linoleum will save on finishing, but this option is not the most reliable in terms of service life.

Installation criteria and locations.

In order for the threshold to perform its functions efficiently and for a long time and not spoil the appearance, it is important to choose the type correctly. It must meet the following parameters:

Degree of fit. The threshold must be completely identical in size and shape for complete sealing.
Height. The optimal height is considered to be no more than 30 mm
Material. When choosing, you should take into account the degree of load on the passage and location.

Thresholds are required to be installed on entrance doors and fireproof openings, plumbing rooms and kitchens.

Tips for choosing

When deciding on the design of the threshold, be sure to take into account the size and material from which the frame and the passage door are made. The threshold will fully perform its functions when the following indicators are taken into account during its design:

Floor level. This indicator is taken into account first of all, since the height of the threshold itself depends on it. Too high will impede free movement around the room, as will too low. A standard step should not exceed 3 cm in front of the front door. In a private house it may be higher.
Material. The choice will depend on the expected degree of load and frequency of use of the product. If this is the entry threshold, then it is better to choose metal. For interior doors made of PVC, wood or plastic is best suited. To enter the balcony, purchase tiles, metal and wood.
There are no gaps between all components of the doorway - the threshold must clearly coincide with the size and shape of the opening. The ideal solution to this problem would be to purchase a threshold along with the door.

If you just need to delimit the space between rooms, it is enough to purchase wooden or plastic options.

In any case, when choosing a product, the design of the door and threshold should not differ. As a set, they should be a complete tandem. Thresholds are an integral part of buildings, providing the premises with safety, noise and heat insulation.

Manufacturers offer a wide selection of similar products for every taste and color. The cost of products also ranges from the cheapest to the most expensive items. The most popular thresholds are wooden models, as they are affordable for most buyers. Concrete steps are more expensive. To install this structure, you can invite a specialist, or you can perform this procedure yourself.

When installing a metal threshold, it is important to select the appropriate fittings and fastenings that will securely hold this item in place and will not deform over time.

To learn how to make a threshold for the front door, see the following video.

What is it needed for?

Any thresholds are designed to perform the following functions:

Dividing - the threshold of the front door is designed to separate the room from the street;
Protective - prevents dust, dirt from entering from the street or another room;
Sound-absorbing – promotes sound insulation in the room. To do this, they actively use products with rubber inserts, which will provide the best possible seal;
Decorative – beautiful and original thresholds with a door will create a unique set;
Security – provide additional protection for doors against burglary. For example, there are designs of thresholds in which a special locking system is built in;
Holding – thresholds can hold the floor covering (linoleum, laminate);
Decorating - some models are installed in such a way as to hide imperfections or defects in the floor;
Heat-saving - all thresholds retain heat in a house or apartment.

Independent production and installation of a wooden threshold.

The whole process is clearly shown in the following video:

The working surface is cleaned, the base is leveled and a primer is applied.
Next, the required dimensions are prepared. You can trim the bottom corners of the door frame to fix the threshold more firmly.
Holes are drilled in the product through which nails are driven. This is done to ensure that the threshold does not crack during installation.
The next step will be its installation and fixation.
Finally, the surface of the wood should be varnished and covered with sealant.

Such simple manipulations allow you to set the threshold yourself, without resorting to the help of specialists.

Outdoor threshold tiles: what is needed before installation?

It is important to properly prepare for such a responsible job as laying tiles on the porch. There is nothing wrong with the fact that after reading this article, you decide not to experiment with tiles and grout yourself, but invite a professional. External steps, terraces and porches present significant challenges when facing. Without the appropriate experience, freshly laid tiles can not only quickly fall off, but also cause injuries to residents of the house, relatives or guests.

The porch and its steps are constantly subject to mechanical stress - provided that the house is residential. Exposure to rain, frost, dust or heat is also mandatory and does not depend on the presence of residents. To ensure decent quality of cladding work outdoors, the following conditions must be met:

Source