How to assemble a boss bed from a lot of furniture with a lifting mechanism

I've always liked convertible bedroom furniture. The available space under the mattress allows you to put a lot of things into the bed frame; this replaces a closet or chest of drawers, which is important for a small bedroom. I decided to make a double bed with a lifting mechanism myself.

I have been making furniture in my small workshop for a long time. Having the appropriate equipment and a large set of tools made solving my problem much easier. After a short search in the media, I decided on a bed design with a lifting mechanism and gas shock absorbers.

Material advantages

Water-repellent impregnation
High abrasion resistance - 40,000 cycles
Hypoallergenic material
Complies with European OEKO-TEX® certification
Tactilely pleasant, soft pile
Furniture velvet - trend 2022

BOSS bed is an elegant bed with a discreet, minimalist design. Thanks to the soft headboard with a geometric pattern, the bed becomes the center of any bedroom. Comfortable upholstery gives a feeling of unique coziness.

Characteristics

Linen box and lifting mechanism

HEALTHY SLEEP: reinforced anatomical base.

HideBox: spacious storage compartment with a capacity of 1100 liters.

SpaceLift: gas elevators made of aircraft-grade aluminum.

360 design: the back of the back is entirely made of main fabric.

Common problems and errors

Possible problems or violations of the assembly technology include:

Errors in marking or the need to drill holes. Some models come with pre-made holes, but in most cases you prepare them yourself. The backrest requires special attention; the slightest mistakes when attaching it lead to distortion of the entire structure.
Errors when installing gas lift. Replacing the right side with the left or lack of symmetry makes the load on the lifting mechanism uneven, which ultimately leads to its rapid breakdown.
Excessive pressure on the slats during installation.
Strong tightening of fasteners.
Assembling a bed on an uneven place or fluffy carpet.
Using fasteners of the wrong length. The supplied kit may contain hardware of different sizes similar in appearance or purpose. Accidentally replacing long fasteners with short ones is considered a mistake; as a rule, assembling a bed with a lifting mechanism will not work in such cases.

Bed BOSS 2 part

A lot of furniture. Mattress Boss real reviewRead more

Video instructions for assembling a bed with a lifting mechanismRead more

Bed BOSS mini (soro grey)More details

BOSS XO BED / LOTS OF FURNITURE / BACKSTAGEROOMMore details

Bed Boss Promo code AFKX(mnogomebeli.com)More details

Assembly of a New Luxury bed with a lifting mechanism from Much furnitureRead more

Bed BOSS XO / LOTS OF FURNITURERead more

Sofa Sofa BOSS from a lot of furniture HORROR!Read more

Bed BOSS MINI Aqua from the factory of the manufacturer of upholstered and cabinet furniture for the home No. 1 Much FurnitureRead more

LOTS OF FURNITURE | How they SCREW CUSTOMERS! #mrs_evgeniyaMore details

Bed BOSS.XO Multi-furniture - BOSS Promo code for discount: DLMBMore details

Inevitable reinforcement of a bed from a lot of furnitureRead more

Source

The procedure for assembling a bed with a lifting mechanism, video instructions and diagrams

The advantages of a bed with the ability to lift the mattress are well known to many users - in conditions of limited space, it allows you to conveniently store bedding and other things. The main drawback of this model—the high cost—can be partially mitigated by refusing the services of professional furniture assemblers. To do the work yourself, you will need a set of available tools. The diagram supplied with the manufacturer will tell you in what order the bed with a lifting mechanism is assembled, and the video instructions will explain in detail all the difficult points. In most cases, to obtain a stable, reliable structure, it is enough to simply follow a step-by-step algorithm. Deviations from the standard pattern when connecting parts of such beds are rarely observed.

Beds BOSS

BOSS MINI mattress as a gift

I hereby give my consent to Mnogo Mebeli LLC, registered at the address: Russian Federation, Saratov region, Saratov district, s. Kleshchevka, Liter G2 for the processing of my personal data (hereinafter referred to as “PD”), which is specified in this form, as well as other personal data that became known to Mnogo Mebeli LLC.

The purposes of providing PD to Mnogo Mebeli LLC are:

processing and execution of orders placed by me;
providing customer support;
processing messages from the client sent through the feedback form;
promotion of goods, works, services presented for sale;
conducting customer marketing research;
provision of distance trading service;
carrying out promotions and campaigns to increase customer loyalty, notifying customers (SMS, WhatsApp, etc.), managing access to the client’s personal account;
other purposes permitted by the current legislation of the Russian Federation.

This consent is given to carry out the following actions in relation to my personal data: collection, recording, systematization, accumulation, storage, clarification (updating, changing), extraction, use, transfer (provision, access), blocking, deletion, destruction of personal data, in the manner as automated and non-automated processing of personal data.

The procedure and conditions for processing personal data are regulated by the Policy of Mnogo Mebeli LLC regarding the processing of personal data; additional information on the processing of personal data can be found in the Site Rules.

This consent can be revoked by sending me a written application to revoke consent to the processing of my personal data, but subject to the verification of my identity.

Source

Material advantages

Soft and pleasant to the touch texture
No finger effect
Aesthetic appearance
High abrasion resistance - 35,000 cycles
Hypoallergenic material
Breathable and hygroscopic material

Beds BOSS

Buy in 1 click

We will call you back and clarify the details.

Application sent

Wait for the operator to call

I hereby give my consent to the individual entrepreneur R.V. Belyakov, registered at the address: Russian Federation, Saratov region, Saratov district, s. Kleshchevka, Liter G2 for the processing of my personal data (hereinafter referred to as “PDN”), which is specified in this form, as well as other personal data that became known to IP Belyakov R.V.

The purposes of providing IP Belyakov R.V. PD are:

processing and execution of orders placed by me;
providing customer support;
processing messages from the client sent through the feedback form;
promotion of goods, works, services presented for sale;
conducting customer marketing research;
provision of distance trading service;
carrying out promotions and campaigns to increase customer loyalty, notifying customers (SMS, WhatsApp, etc.), managing access to the client’s personal account;
other purposes permitted by the current legislation of the Russian Federation.

The procedure and conditions for processing personal data are regulated by the Policy of IP Belyakov R.V. regarding the processing of personal data, additional information on the processing of personal data can be found in the Site Rules.

This consent can be revoked by sending me a written application to revoke consent to the processing of my personal data, but subject to the verification of my identity.

Source

How to assemble a bed? Instructions

So, the packaged pieces of new furniture were brought home. Take a utility knife and carefully open the cardboard packaging. Let all the parts remain in the order they were packed at the factory. Now take the instructions and identify the purpose of each part to make the assembly manual easier to understand.

Complete set and assembly are indicated in the instructions

Assembling a bed with a lifting mechanism

For quality work, prepare tools that are used at home.

screwdriver or screwdriver with a set of attachments;

Assembly instructions included with the product.

Before starting assembly, carefully read the manufacturer's instructions; they should be clear to you. Then move the components of the future bed to the room where you plan to place the structure.

Check the availability of parts by looking at the list provided in the instructions.

All steps can be written down as a checklist for assembling the bed, and the steps themselves are best performed together, so ask your family to help you.

You should start assembling the bed from the base, which usually consists of three frames and a headboard. To connect these parts into a single structure, you will need to take corners, small brackets or ties. For fastening, you must use the screws included with the model.

Then we attach the legs, if any, or install soft seals so that the structure does not damage the floor covering.

The next step is to install it to the top of the sidewall; if the model includes a lifting mechanism, then install it with a slight backlash (the gap between the parts is necessary to prevent the mechanism from jamming).

The main element of any bed is the frame, which is a metal frame with slats attached to it.

The frame can be made of wood, solid wood, boards, timber or chipboard.

Thanks to the slats, the mattress is supported for the most comfortable sleep.

Using corners, we connect the side frames at a height of about 20 cm;

We fix the footrests at the same height;

We assemble the ribs, they should be 5 centimeters above the frame;

We strengthen the central frame using special corners.

With orthopedic base

Today, the orthopedic base is considered the most popular, since a large number of people have problems with the spine. The orthopedic design consists of a frame and special adjustable slats. It comes with a mattress with specially designed fillings and springs to ensure restful sleep for people with posture problems.

At the head of the head, the places intended for fastening are marked in production

The bed, as a full-fledged piece of furniture, is not only intended for sleeping, but also contains the main aesthetic component of the bedroom design. The headboard can be carved, soft, covered in fabric or leather, as well as a central element that attracts attention in the bedroom.

Your task is to connect the sides of the frame with the headboard using fixing elements.

Required tools and fasteners

All actions begin with studying the instructions for assembling a bed with a lifting mechanism, checking the declared configuration with the actual number of elements and assessing their condition. As a rule, all the necessary fasteners, fittings (screws, hardware or nails, euroscrews, ties or bolts for fastening drawers, a rope or any other lifting handle) are supplied in the basic kit. After checking their quantity, in order to add all the small parts, it is worth taking 2 boxes. One for the lifting mechanism, the other, if possible with different compartments, for the remaining fasteners.

A hex key for tightening bolts is also usually supplied as standard. In its absence, this instrument is prepared along with the others. Basic list:

screwdriver, screwdrivers with different attachments, ring wrench;
measuring instruments: tape measure, level, pencil;
hammer for adjusting lamellas.

Reply to the post “What is the difference between the IKEA instructions and the domestic ones?”

Hoff. Instructions for assembling a table with 16 positions look like this:

This is all

“instructions” - there is no text with a sequence of actions. Here's an explosion diagram for you, enjoy.

The four legs are different from each other - the holes for the dowels (wooden cylinders) on which the inclined struts are mounted are located at different distances from the ends. Moreover, the parts themselves are not marked in any way, and it’s easy to confuse them during assembly. To avoid confusion, you need a tape measure. And if you mix it up, the struts simply won’t fall into place.

Or this. How obvious is it that the tie (labeled “p” and “o”) should not connect all three parts, but only two? The horizontal bar in the foreground does not participate in the festival.

A separate issue is the quality of the wood (so-so), processing (everything needs to be sanded, otherwise you can plant a splinter) and sawing (the difference in the length of the tabletop boards is up to seven millimeters). There are even photos in the reviews, you can go and look.

Stages of work

The main reference point is the manufacturers' guidelines. With the right approach, work begins with studying it. It will also be useful to watch video instructions for assembling a bed with a lifting mechanism. For each specific model, the algorithm of actions may differ slightly.

Assembling the base and box

Work on the formation of the base box is carried out according to a simple scheme:

The front and 2 sides are connected first.
The central crossbar is fixed to the U-shaped structure (it also serves as the main support of the body).
The backrest is attached to the sides.
The bottom is fixed to the box.

For models with an additional drawstring belt, the bed assembly scheme is a little more complicated. In such cases, the drawers are connected separately and mounted on the inside of the body. The same applies to products with additional power elements, fixed with screws after assembly and checking the evenness of the body.

Assembly of the base is completed by fastening the bottom, checking or adjusting the angles and carefully tightening the screws without pressing.

Installation of legs and installation of corner ties

Not every model has free-standing supports; in a number of modern beds, these functions are performed by solid sidewalls. In other cases, the legs are connected to the base with screws and nuts. Experienced furniture makers carry out this stage, following the manufacturers' recommendations, namely, before installing corner ties (the most common option) or, conversely, as a last resort. The exact sequence of actions depends on the model and is specified in advance.

Corner ties that strengthen the bed structure are fixed with nuts with external and internal threads and countersunk bolts. In addition to screwdrivers, you will need an Allen wrench to assemble the bed. As a rule, these elements are mounted on 2 fasteners on each side; in order to avoid distortions of the ties, their installation is carried out after checking the evenness of the markings.

Installation of the lifting mechanism

Lifting mechanisms are usually supplied assembled, requiring only proper fastening - with the cylinder facing up, taking into account the asymmetrical design of the parts and the inadmissibility of errors. For most models, they are first mounted on the bottom of the frame with screws, then the lower part of the lifting mechanism is screwed to the inside of the base body. To simplify this work, most manufacturers make special marks or pins on the boxes.

After this, the gas shock absorbers are inserted into the lifting mechanism and tightened with nuts. These elements are fixed using fluoroplastic washers and nuts with a locking mechanism. At this stage, any risk of backlash is eliminated - the fasteners are tightened all the way, loosening at the end by half a turn, no more.

The operation of the lifting mechanism is checked several times; the presence of gaps or distortions between the body and the bed frame is not allowed.

Attaching the frame and mattress supports

At the final stage of assembling a bed with a lifting mechanism, a central leg is attached to the correctly installed frame, which acts as a limiter, and handles that simplify the lifting process. Installing lamellas requires care and a considerable amount of time. The plates are driven into the holders with a hammer or by hand with sufficient flexibility. It is impossible to hammer both ends at the same time; with the correct approach, one edge of the plank is tightly inserted into the holders, after which the lamella is slightly bent upward and inserted with the other end (if necessary, knocking it out with a hammer). The process ends with laying the mattress, re-checking the work, and tightening the cover. Furniture may be put into operation if there are no distortions, creaks, wobbles or any similar defects.

For a bed with an orthopedic bottom or a large number of slats, it is worth purchasing a hard or semi-rigid mattress.