Instructions for assembling a corner wardrobe Rome a lot of furniture

Step-by-step diagram for assembling a corner cabinet.

These instructions for installing a corner cabinet design with a swing door are universal.
It is suitable for furniture manufacturers Shatura, Stolplit, Borovichi, Lazurit, Angstrem, Elba furniture and for the companies Mnogo Furniture, Hoff - selling goods from different factories. In the step-by-step diagram - the assembly of a corner cabinet, changes can be made depending on the manufacturer, for example, the eccentric screed is replaced with confirmations, supplemented with shelves, decorative elements - pilasters and cornices.

Since the body of the corner cabinet is quite large, there are models equipped with a lighting device for the interior space; a unit is installed on a photocell and an LED lamp turns on when the door is opened.

But the entire assembly principle does not change; general technical aspects are reflected in our diagram.

The design of the cabinet parts is numbered.

The picture shows a general view, each part has its own number. Below we will consider the installation sequence point by point.

The first step is to install the fittings on the corner elements - the bottom and top of the cabinet.

On the part numbered 04, the bottom of the cabinet, screw in the rods of the eccentric coupler, insert dowels and locks. We attach the legs and support base. We also install fittings on the top panel 01.

Preparing the side panels.

The highest parts of the cabinet. We stuff the legs onto the bottom of the panels, screw in the rods, and insert dowels. On the side panel with number 07, the right side of the cabinet, we place the hinges. On the left 06 there are shelf holders.

Internal vertical panels.

On the panel with number 71 we install a connecting corner, locks and small rods for the top shelf. 61 the shelf holders are driven in and small rods are screwed in for the middle shelf.

How to assemble a Rome 180 cabinet

Scheme for assembling an elite wardrobe, a lot of furniture and the lyrics of the caste song, everything is fine How to assemble a wardrobe “Rome” “prestige” from: All diagrams and fittings were included, no problems arose.

Film title: The Basketball Diaries In English: The Basketball Diaries Genre: Drama, crime.

WATCH THE VIDEO ON THE TOPIC: Wardrobe “ROME” Wardrobe Rome 150 Assembly Delivery RUR in 3 days Pickup from 1 locationAddress Moscow region, Noginsky district, Vorovskogo village, st.

Mira, 5 Sveta The Rome wardrobe was bought for mom and dad, they had a lot of closets in the house, this greatly limited the space in the room.

The wardrobe was bought as a gift when my parents were at sea. Delivery was very fast, when the parents returned - my mother was absolutely delighted with the closet, it has completely mirrored doors, the room is now spacious, and most importantly, things from all of my parents’ closets fit in!

Sergey The cabinet is very roomy, its width is as much as cm.

All the things fit in and there is still room left, you can safely go shopping! Looks great. They didn't collect it themselves. The wife is happy, now she wants to buy another sofa in a lot of furniture for the living room.

To assemble sliding wardrobe doors, the following components must be available: Tools necessary for self-installation of wardrobe doors:

1. hammer;
2. pliers;
3. a set of Phillips and straight screwdrivers;
4. stationery knife;
5. cord plumb line;
6. metal drill (Ø 4 mm).
7. roulette;
8. drill or screwdriver;
9. building level;
10. imbus key;

The assembly of doors of any design begins only after the final completion of the installation of the cabinet itself.

We also recommend reading the following articles: This video is an instruction for installing sliding doors: If you have not found a suitable option, order a free design project: we make furniture according to your parameters.

Non-standard sizes, filling and design of doors are not a problem; a custom-made wardrobe will be exactly what you need. - 2-door - 4 widths (100, 120, 140 and 160 cm), 2 heights (220 or 240 cm), 2 depths (45 or 60 cm).

assembly instructions for cabinet Rome 180

LibraryThe best on ClipVL 19 days agoSelf-assembly of a RIM 180 sliding wardrobe from a lot of furniture step-by-step instructions How to assemble it yourself for free.

4 years agoInstalling rollers on a wardrobe door. Furniture fittings. DIY wardrobe. 6 years agoAssembling mirror doors for a sliding wardrobe.

Step-by-step instructions for inserting filling into the door frame.

Installation. 1 years ago - instructions for assembling the “Coupe” wardrobe: https://dekonte.ru/spalnja/shkafy-i-tumby/kupe-s-zerkalom We are on social networks: . 6 years ago 2 years ago Do you want to install wardrobe doors, but don’t know how?

Then this video is for you! Full installation cycle. 2 years ago 2 years ago 2 years ago 3 years ago You can order doors here: https://dverikupe-nsk.ru/ Discount using promotional code: MAKAWELLI.

1 years ago MORE INFORMATION ON THE SITE - https://chonemuzhik.ru/kak-sobrat-shkaf-kupe-svoimi-rukami.html How to assemble a wardrobe. 2 years ago Assembling the “Bella” living room.

Bella 3-door wardrobe is one of the parts of the modular wall. Also in this composition. 5 years ago What does a compartment door consist of, installation basics, features of use. https://vstroennyeshkafykupe.ru - new site 1.

“For the first time in our computing technology, the same approach was seen in a series of personal computers, and the ruling software of this family was called dual-channel macro software.

In science, communication is understood as the interaction of subjects carried out by prescribed drugs in the integrity of its three sides: communicative, interactive and perceptual.

Even in the display case they stand together, and in the instructions the cabinet is illustrated together with this rack, but separately, of course, this is no longer the same, apparently this is a special cunning move to rip off more money from clients. Spaciousness: The photos won’t let me lie, but the closet is oh-so-very roomy, in my opinion it’s even bottomless, and you can put half an apartment in there.

Moreover, on the top shelves I also keep bed linen and towels. The best part was putting all my clothes into this freshly assembled closet. This is easy to do: the plastic plugs are cut off with a knife, and the legs themselves are screwed into holes prepared at the bottom with a diameter of 10 mm.

Depending on the size of the assembled wardrobe, the number of legs will be adjusted.

So, for large planes more than 6 support elements will be required. In order for the furniture assembly to be accurate, you should additionally check the floor surface for evenness. Use a building level: if there are differences on the floor, tighten the adjustable legs.

How to make a wardrobe with your own hands

Instructions for assembling the Sliding Wardrobe Using your diagram, which is contained in the drawing and numbering of parts, follow the step-by-step instructions outlined below.

It is recommended that two people work together to assemble the wardrobe.

Download Assembly Instructions (Word 300 KB) Download Assembly Instructions (Pdf 361 KB) 4 mm hex key Accessories for a sliding wardrobe Using a confirmat, screw two parts No. 5 to part No. 4.

This is how we got the base of the cabinet.

We install spacer No. 10, if it is present in your diagram. We lift the cabinet and attach shelves No. 8. We distribute the hardboard over the cabinet body and nail it in place.

If necessary, we use a profile to connect fiberboard.

We fix the clothes rail at the required height, but not less than 50 mm from the top.

Screw the top rail flush with the posts. The upper and lower guides are screwed with self-tapping screws and press washers for a tighter fit.

The lower guide is mounted flush with the racks when using symmetrical handle profiles. You may be interested in: When using materials from this site, a link to the site “receptmebeli.rf” is required as a source of information.

Sliding wardrobe RIM-180 “Lots of furniture” - review

Greetings, dear reader.

As promised, I am ready to review the RIM-180 cabinet purchased after renovation from .

The first impression of the product, of course, was spoiled due to the boorish behavior of the store employees; all this is written about in the review of the store itself.

In this review I want to tell you more about this cabinet model, including the assembly and spaciousness of the cabinet, its unusual facade, which fits seamlessly into any apartment interior.

Great for bedrooms, living rooms, spacious hallways and living rooms, and will fit well into a children's room. Color: Wenge Creates a calm and homely atmosphere despite its slightly blue-black color.

But I will say right away that dust on dark furniture is visible to the naked eye, only in the morning you wipe it off by the evening, so arm yourself with rags and be prepared to wipe it at least once every 3 days, unless of course it irritates you. The shelves on the rack are white, that’s why there are no especially visible.

Type of wardrobe: Three-door compartment All wardrobe doors move: central, left and right, but due to the fact that there are three doors and two guides, it turns out that 2 doors conflict with each other, sometimes my husband opens it on one side, his things are there, and I with different, and we thereby interfere with each other, it turns out funny and inconvenient, of course

Cabinet dimensions:

This is easy to do: the plastic plugs are cut off with a knife, and the legs themselves are screwed into holes prepared at the bottom with a diameter of 10 mm.

Depending on the size of the assembled wardrobe, the number of legs will be adjusted. So, for large planes, more than 6 support elements will be required. In order for the furniture assembly to be accurate, you should additionally check the floor surface for evenness.

If necessary, you can move the lock with a flat-head screwdriver. The lower wheels were designed so that with the help of an adjusting screw located on them, you can adjust the uniformity of the door to the side of the top and bottom. However, to get it intact, you will have to endure a lot.

Modern interior designs most often include the use of built-in household appliances and furniture (cabinets, beds, tables, etc.). This solution helps to significantly save space even in the smallest apartment or house.

Built-in wardrobes of various models made from natural materials are very popular in interior design.

How to install wardrobe doors Rome 180

Assembly procedure for the Rome 150 cabinet Assembly procedure for Rome 150 Now that all the parts are prepared, drilled, and the doors are assembled, we proceed to assembling and installing the cabinet in place.

We will describe the instructions for assembling and installing the cabinet, taking into account the fact that during installation it is not possible to invite assistants, and you will have to assemble it yourself, i.e. by one person. 1. We sort the parts according to the order in which they appear during assembly.

Do-it-yourself Roman blinds in 1 evening: master class Do-it-yourself Roman blinds in 1 evening: master class After adjusting the doors, the schlegel is installed. Carefully remove the protective film from the adhesive base by 9-5 cm and glue from top to bottom, gradually removing the protective base.

Wardrobe Rome 180 order If you have not found a suitable option, order a free design project: we make furniture according to your parameters. I became acquainted with the Many Furniture factory at a time when we needed furniture for the entire apartment in a short time. Financially, we were also not ready for expensive furniture.

And this factory became our salvation.

Important Hello. My review of the RIM wardrobe from the company Much Furniture.

My husband and I picked up this product on the Lots of Furniture website.

Attention If you are renovating an apartment/house yourself, then you just need to know how to properly assemble a wardrobe yourself, without involving specialists.

Assembling a sliding wardrobe: instructions and diagram In order to give rigidity to the sliding wardrobe, it is necessary to secure the back wall.

As a rule, it is secured with nails.

» Banking Law

1. Catalog /
2. / Sliding wardrobe Rome…

Lots of Furniture Social comments Cackle Similar video

1. Sliding doors PAX
2. Luxury bed 160 mxf
3. Bed assembly
4. Assembling a sliding wardrobe from the DOM factory
5. Assembling a sliding wardrobe.
   Wardrobe "Basya".
6. Sliding wardrobe in the hallway
7. How to assemble a factory sliding wardrobe from a 33 m2 store in Kherson
8. How to make a dressing room in an apartment.
   Closet. Furniture assembly. Made by hand.
9. Sliding wardrobe "Trio"
10. Wardrobe "ROME"
11. Installation of compartment doors
12. Wardrobe in the bedroom
13. HOW TO ASSEMBLE A CABINET in 8 MINUTES by yourself!
14. Sliding wardrobe Rome 180
15. A LOT OF FURNITURE

© 2005-2018 “NoFolloW Site Directory” - paid and free registration.

Except for the cases established by this Agreement, as well as the current legislation of the Russian Federation, no Content can be copied (reproduced), processed, distributed, published, downloaded, transmitted, sold or otherwise used in whole or in part without the prior permission of the copyright holder.

2.3. These rights can be granted only by written agreement with the Site Administration.

3.1. As a User of the website “www.e-odin.ru”, you agree to the provision of your data to the Administration for their processing, storage and use for the purposes of consulting, providing information about products, for the purposes of marketing research conducted by the company, as well as for other purposes specified in the Agreement.

Assembling a wardrobe with a lot of furniture Rome 180

» Automobile law

1. / Sliding wardrobe Rome…
2. Catalog /

Lots of Furniture Social comments Cackle Similar video

1. Assembling a sliding wardrobe. Wardrobe "Basya".
2. How to make a dressing room in an apartment.
   Closet. Furniture assembly. Made by hand.
3. Sliding wardrobe in the hallway
4. Sliding wardrobe Rome 180
5. Sliding wardrobe "Trio"
6. Assembling a sliding wardrobe from the DOM factory
7. Wardrobe "ROME"
8. HOW TO ASSEMBLE A CABINET in 8 MINUTES by yourself!
9. Wardrobe in the bedroom
10. Installation of compartment doors
11. Luxury bed 160 mxf
12. A LOT OF FURNITURE
13. How to assemble a factory sliding wardrobe from a 33 m2 store in Kherson
14. Sliding doors PAX
15. Bed assembly

© 2005-2018 “NoFolloW Site Directory” - paid and free registration.

Except for the cases established by this Agreement, as well as the current legislation of the Russian Federation, no Content can be copied (reproduced), processed, distributed, published, downloaded, transferred, sold or otherwise used in whole or in part without the prior permission of the copyright holder. 2.3. These rights can be granted only by written agreement with the Site Administration.

Installation of the corner cabinet frame structure

With the bottom 04 placed on the legs, vertical internal panels are inserted on top. Part 61 is attached in the center, and 71 on the rear edge. They are pulled together by a corner.

Next comes side panel 07. Close the locks. We hold this detail.

We apply the corner top 01, fix the part with all the vertical panels. Installation takes place using a stepladder.

Attach the left vertical panel and secure the locks.

We place shelves 02 and 03 on small rods. Stuff the back wall 20 and 19. Add shelves 21

Hanging a door on a corner cabinet

We install hinges on the door and screw in self-tapping screws. The door hinges are inserted into the hinges. An adjusting screw B is installed on the hinge; we control the process of correct entry of the screw groove into the groove of the hinge. We fix the hinge with screw A. Adjusting the door - using screw C, lower or raise the door, screw B “to the right” “to the left”, screw A “toward” “away”. Be careful when installing the handle on the mirror surface of the door. The iron base of the handle should not be adjacent to the mirror; a spacer washer is inserted into the hole.

Source

Door installation

Before installing the doors, it is necessary to install the guides, strictly observing a straight line. First of all, screw on the upper rails, and then the lower ones.

When installing sliding doors, you should always install the inner one first, and then the outer one.

The upper guides are attached flush with the side edge, and the lower ones with an indentation of 8-15 mm. Holes for mounting are drilled in a staggered pattern on both lines.

Once the doors are adjusted, the stoppers should be adjusted correctly. They are needed to ensure that the doors remain stationary in the closed position.

2 doors

Before installing the doors, you need to check and clear the bottom track of any debris. If foreign particles get into the roller mechanism, the door will jam.

The door that will run on the far rail is installed first. The door is first inserted into the top track, and then the end rollers are placed in the bottom channel.

If there is more than one door, the outer latches are adjusted first, and the rest are centered on them.

3 doors

To install 3 doors on a wardrobe, first install two doors that will run on the rear rail. They are also mounted: first in the upper guide, then in the lower. After installing the doors, stoppers are installed to prevent the doors from colliding.

Article on the topic: What types of facades are there for kitchen furniture?

Please note that a mirror door is expensive and will be unpleasant if it falls out due to improper installation.

Lastly, the door is mounted, which will run on the front rail. A mirror is usually attached to it. It is very important that the doors are installed level, otherwise they may fly out of the grooves, which is not safe to use.

Tools

First I prepared the tool. Everything you need to make a bed with a lifting mechanism with your own hands is included in the following list.

• Screwdriver for fastening furniture base frame parts.
• Tape measure and metal ruler for marking MDF sheets.
• Drill for drilling holes in metal parts of lifts.
• Pencil for marking.
• Drills for wood and metal.
• Drill and key for confirmations for assembling fragments of the bed frame.
• Iron for edging furniture tape.
• Jigsaw for cutting MDF.
• Clamps (2 pcs.) for fixing housing parts when assembling the housing.
• Hacksaw for cutting boards to required sizes.
• Knife for removing protruding parts of furniture edge strips.
• Set of wrenches and sockets.
• Hammer.

Materials

I purchased the materials needed to make a bed with a lifting mechanism at a building materials supermarket according to the list:

• confirmations – 8 pcs.;
• self-tapping screws 25 mm – 20 pcs.;
• furniture corners (50 × 50 mm) – 4 pcs.;
• metal corner (32 × 32 mm) – 1.4 m;
• MDF sheet 2440 × 1830 × 30 mm;
• fiberboard sheet – 2440 × 1830 mm;
• edged board 1600 × 150 × 20 mm;
• inset frame for a mattress (orthopedic base on a metal frame);
• furniture legs – 6 pcs.;
• edge furniture tape – 10 m;
• gas shock absorbers (425 mm from 800 N) – 2 pcs.;
• metal strip (50 × 3 mm) – 1.3 m;
• PVA glue - tube;
• bolts, washers, nuts – m 6;
• metal bushings (10/16 mm) – 8 pcs.

The entire process of assembling a 160 x 200 bed with a lifting mechanism with your own hands is outlined in the following instructions.

Step-by-step instruction

The work was divided into several stages:

• preparation and assembly of MDF parts,
• installation of an inset frame under the mattress,
• production of lifting mechanisms,
• Assembling a bed frame with a lifting mechanism with your own hands.

Preparation and assembly of MDF parts

1. On a piece of paper I drew drawings of a bed with a lifting mechanism.

1. On a sheet of MDF with a pencil, using a tape measure and a metal ruler, I marked the future parts of the body.
2. The MDF sheet was cut into pieces convenient for cutting.
3. On the workbench I secured parts of the MDF sheet with clamps.
4. I used a jigsaw to cut out elements for assembling a bed frame 1600 x 2000 with a lifting mechanism.
5. The ends of all parts were wiped with a damp cloth.
6. Pressing the edge tape with an iron, I ironed all the ends except those facing the floor.
7. I set up a headboard (1664 × 772 mm), two side drawers (2054 × 296 mm), a back wall (1664 × 296 mm) and a cross board (150 × 1608 × 20 mm).
8. On the outside of the corner joints I drilled 2 holes for confirmations.
9. Installed the fastener using a Phillips screwdriver.
10. The heads of the confirmations were covered with plastic plugs using PVA glue.
11. Inside the 4 corners, I installed plastic corners with a screwdriver.
12. To ensure additional rigidity of the frame, I installed a transverse board, connecting it to the sidewalls with metal corners on screws.
13. The fiberboard sheet was cut with a jigsaw to dimensions of 2054 × 1664 mm.
14. The assembled frame was placed on its side. I secured the fiberboard bottom sheet with screws around the entire perimeter of the bed.
15. I drilled holes in the bottom corners of the frame and in the middle of the frame. I inserted legs into them. Plastic supports ensure easy movement of furniture on the floor. When cleaning a room wet, the legs prevent the MDF from coming into contact with the wet floor.

Photo of the table assembly process

In the Mnogo Furniture store, the transforming table is usually sold assembled. In order not to spend money on the work of a master, you can assemble it yourself. As expected, instructions for assembling the table come with each model, but sometimes it can be difficult to understand it without outside help. Therefore, it is better to use photos and videos that describe each stage of the work in detail.

Table assembled Disassembled

Table assembly diagram

The transforming table from “Much Furniture” should be assembled in stages, starting with the legs. The drawings show in detail how the parts are twisted. It is worth noting that assembly must be carried out according to technology, otherwise the furniture will not be able to serve you for the required period. In general, the tables are assembled according to the following plan:

1. Legs.
2. Table top lifting mechanism.
3. Table frame.
4. Additional shelves and drawers (if available).

Knowing how to assemble a transforming table from “A Lot of Furniture” using a video, you will cope with this task in a few hours. To simplify the process, you can use a screwdriver and a ruler with a pencil to make marks. It may not be very convenient to do this alone; the help of a friend will not be superfluous, at least to hold some elements of the table.

How to assemble a wardrobe Rome 180

Greetings, dear reader. As promised, I’m ready to review the RIM-180 cabinet purchased after renovation from the Mnogo Furniture store .

Color: Wenge

It creates a calm and homely atmosphere despite its slightly blue-black color. Our apartment is bright and the windows face the sunny side, so we took the risk of choosing such a dark color for the facade and did not regret it one bit.

But I will say right away that dust on dark furniture is visible to the naked eye, only if you wipe it in the morning it will settle by evening, so arm yourself with rags and be prepared to wipe it at least once every 3 days, unless of course it irritates you.

The shelves on the rack are white, so they are not particularly visible.

Wardrobe type: Three-door coupe

All the doors of the closet move: central, left and right, but due to the fact that there are three doors and two guides, it turns out that 2 doors conflict with each other, sometimes my husband opens it on one side, his things are there, and I’m on the other, and we are each other - thereby disturbing a friend, it turns out funny and inconvenient

Cabinet dimensions: 180x60x224

I advise you to buy it together with a corner rack; the rack is purchased separately, which seemed strange to me, since together it looks like a solid, large and organic cabinet.

Capacity:

The photos won’t let me lie, but the closet is oh-so-very roomy, in my opinion it’s even bottomless, and you can put half an apartment in there. Moreover, on the top shelves I also keep bed linen and towels.

The best part was putting all my clothes into this freshly assembled closet. The whole apartment was filled with the smell of new furniture and the mood improved, of course, because the renovation was almost finished and the long-awaited order was quietly beginning to form in the apartment.

Quality:

The cabinet is made of medium quality chipboard panels. Some of the boards were chipped , and despite the good build quality, this is precisely why a star can be removed.

One of the three compartment doors is mirrored, be sure to check it at the delivery stage to ensure it is smooth, without chips or scratches, without any distortions or anything else. I was most worried about the mirror, but I got it without defects, thank God.

All 3 doors around the perimeter were sealed with a protective film, which, when peeled off, left marks on the metal surfaces , I still can’t wipe it off with anything, and I’m afraid to rub too much, after all, the material is scratched. Not critical of course, but still noticeable.

They drive very quietly, the wheels are rubberized

I assembled it in 2 hours together with my husband. There is nothing particularly complicated, the main thing is that all the details are there, and then everything will go like clockwork.

And be sure to calculate how this cabinet will stand, because you will initially assemble it while lying down, but lift it from a lying position by 90 degrees , and it is very high, and this must be done so as not to touch the chandelier or scratch the ceiling. I was worried about my ceiling, since it is made of polystyrene foam , in case of trouble, it would only be knocked off the road and all our efforts would go down the drain, but it’s good that everything turned out okay.

I would also like to draw attention to the structure of the fasteners for the shelves ; by the way, everything was done wisely, nothing falls, jumps out or rises.

I recommend this cabinet, but of course the company is problematic, be sure to keep your eyes open, check all the receipts, all the fittings, it’s better, of course, to also order an assembler. If there are missing parts, it will be easier to prove that it was not you who lost them. I haven't found anything cheaper yet. Good luck)!

Cabinet assembly instructions Rome 180

For the first time in our computing technology, similar approaches were seen in a series of personal computers, and this family of software was called dual-channel macro software.

Labor and cost

The amount of working time spent on making the bed is shown in the following table.

Taking into account the time spent on purchasing, transporting materials and work interruptions, the production of this furniture took me 3 days.

I recorded all the costs for purchasing the necessary materials in a notebook. They made up:

• hardware (confirmations, bolts, nuts, washers, bushings, screws) – 100 rubles;
• furniture corners - 20 rubles;
• steel corner 32 × 32 × 1400 mm – 20 rubles;
• MDF sheet 2440 × 1830 x 30 mm – 2800 rub.;
• fiberboard sheet 2440 × 1830 mm – 200 rubles;
• furniture legs (6 pcs.) – 60 rubles;
• edge furniture tape (10 m) – 70 rubles;
• two gas shock absorbers – 2000 rubles;
• edged board – 50 rub.

I took this bed to the dacha. And for my bedroom I made another model, slightly different in the width of the body. I assembled a new bed with lifts with my own hands, measuring 180 × 200 cm. This time I made the body from laminated chipboard. I placed thin foam rubber and covered the outer surfaces of the body with eco-leather. I did this using a stapler. It turned out very beautiful and inexpensive.

Everyone dreams of having a comfortable and beautiful bed, but for small-sized housing it is difficult to choose a model that would simultaneously meet all these requirements. Here it is important to rationally use the limited area of ​​the room, so you should pay attention to the option with a lifting mechanism. Self-assembly of a bed with a lifting mechanism according to the instructions in the video is a completely accessible process.

Features of assembling a corner structure

A corner table is suitable for a small kitchen. This model saves space and looks quite unusual. To construct a corner table you will need a table top and 2 or 3 legs.

How to assemble a corner kitchen table (instructions and step-by-step guide):

1. Mark the length and width of the future tabletop on the furniture board (both parameters are measured from the corner). Connect the two resulting points with a straight line or arc. The table cut can also be made curved.
2. Cut out the resulting shape using a jigsaw. Sand all edges with sandpaper.
3. Attach the leg to the tabletop and mark the attachment points.
4. Screw the legs to the top of the table using self-tapping screws.
5. If the corner table has only 2 legs, then for greater stability it can be additionally attached to the wall.

Another option to save space is to make one that will be a continuation of the corner kitchen. This design is multifunctional and easy to implement. The table can be used as an additional work surface or for eating at it.

How to assemble a folding table for a corner kitchen:

• Prepare the countertop. Using a jigsaw, cut out a semicircle of the required size from a piece of furniture board of small thickness.
• Go over the cuts with fine-grit sandpaper.
• Cut a rectangle with a width of 12 cm and a length equal to the length of the tabletop. Sand the edges with sandpaper.
• Cut out the future support - 2 rectangles 20 cm wide and a length that is slightly less than the length of the top. Cut one piece diagonally into 2 triangles. Sand all edges with sandpaper.
• Connect the tabletop and the first piece. To do this, loops are placed in the upper corners, which are then screwed with self-tapping screws.
• Place one triangle in the middle of the rectangle. Connect the parts using a long fastening loop. The triangle should be movable and easily move to the side.
• Attach the support to the wall at the desired height. Place the tabletop on the support and connect them at the top center using self-tapping screws.

Choosing a sliding wardrobe Rome from the company Mnogo Furniture

according to the rating of Russian Business Consulting at the end of 2013, it became one of the largest manufacturers of upholstered furniture in the Russian Federation.

Own production, logistics and a retail network of 1000 showrooms across Russia set the company apart from others in the furniture market. The company offers a competitive price for products sold, below the market average, for similar furniture.

The range includes wardrobes, wardrobes, sofas, beds, and other furniture products.

What you need for work

Having a comfortable bed allows a person to get enough sleep and regain strength before a new day. If the bedroom is not large in size, do not be upset. It is enough to choose a bed with a lifting mechanism, which is characterized by compact dimensions, high comfort and original design. Moreover, the cost of such furniture can vary, so you can choose an option to suit any budget. And to save even more, it’s worth analyzing how professionals assemble such structures and doing the same.

The assembly diagram of a bed with a lifting mechanism is quite simple, but first you should know the main advantages of such furniture. Products of this type provide a person with comfort during rest and sleep, but do not take up much free space in the room. The lifting mechanism is attached to a spacious box, inside of which you can store bed linen and bedspreads. Thus, with a small area, you can solve the problem of storing bedding. For these reasons, beds with a lifting mechanism are so popular among owners of small city apartments.

To independently assemble such a structure, you will need the following tools and materials:

• hardware;
• set of screwdrivers, ring wrench, screwdriver;
• wrench;
• yardstick;
• building level;
• hammer;
• a sheet of paper, a simple pencil.

Thus, the work will not require expensive equipment or rare tools, which greatly facilitates the preparatory stage.

Frame assembly

Before you begin assembling the frame, adjust the bottom of the cabinet using a spirit level. If the height of the ceilings subsequently allows you to raise the cabinet, assemble the cabinet on the floor, lying down. If there is a small gap between the cabinet and the ceiling, you will have to do this in a vertical position, which is less convenient.

You can roughly focus on the following indicator - if the height of the ceilings is greater than the diagonal of the side of the cabinet, then the cabinet can be assembled on the floor. In this case, the height of the supports should also be taken into account.

Stages of work

The main reference point is the manufacturers' guidelines. With the right approach, work begins with studying it. It will also be useful to watch video instructions for assembling a bed with a lifting mechanism. For each specific model, the algorithm of actions may differ slightly.

Assembling the base and box

Work on the formation of the base box is carried out according to a simple scheme:

1. The front and 2 sides are connected first.
2. The central crossbar is fixed to the U-shaped structure (it also serves as the main support of the body).
3. The backrest is attached to the sides.
4. The bottom is fixed to the box.

For models with an additional drawstring belt, the bed assembly scheme is a little more complicated. In such cases, the drawers are connected separately and mounted on the inside of the body. The same applies to products with additional power elements, fixed with screws after assembly and checking the evenness of the body.

Assembly of the base is completed by fastening the bottom, checking or adjusting the angles and carefully tightening the screws without pressing.

Installation of legs and installation of corner ties

Not every model has free-standing supports; in a number of modern beds, these functions are performed by solid sidewalls. In other cases, the legs are connected to the base with screws and nuts. Experienced furniture makers carry out this stage, following the manufacturers' recommendations, namely, before installing corner ties (the most common option) or, conversely, as a last resort. The exact sequence of actions depends on the model and is specified in advance.

Special offers from Yandex Market

Discount 500 rubles

Did you see “that same” cream on a friend’s? Has your friend finally revealed the brand of his sports nutrition? Sometimes, the need to buy something arises completely unexpectedly. In such cases, a mobile application comes to the rescue! And what’s even nicer is that for your first order from a mobile device, you will receive a Yandex Market coupon worth 500 rubles! The mobile application is absolutely free and is available for both Android and iOS. You will find more detailed information on the official website in the appropriate section.

Discounts, discounts, discounts

In the Yandex Market online marketplace, the sale never ends! Buy products with up to 70% discount! For your convenience, all promotional products are located in the appropriate section and sorted in ascending order of discount. Just open the “Discounts” tab in the top menu of the official website and go on an exciting hunt for the best deals! Don’t forget about the Yandex Market discount coupons that all bonus program participants receive!

Possible difficulties

Of course, professionals with extensive experience in assembling various types of furniture can easily handle assembling beds with a lifting mechanism. But beginners in this matter may encounter some difficulties, which can be found in the table.

Remember a few more important points:

• defects of any nature (chips, cracks) that were the result of self-installation of the lifting mechanism are not covered by warranty;
• the time spent on doing the work on your own will not be compensated by anyone;
• If the lift soon breaks down, the costs of its repair will not be compensated if it is proven that the breakdown was the result of little experience in the matter of self-installation of such units.

We will also demonstrate the step-by-step assembly of a bed with a lifting mechanism according to the instructions in the video below. After watching it, you will definitely not have any difficulties in your work.

How to make a wardrobe with your own hands

We screw the upper guide flush with the racks. The upper and lower guides are screwed with self-tapping screws with press washers for a tighter fit. The lower guide is attached flush with the racks when using symmetrical handle profiles. You may be interested in: When using materials from this site, a link to the site “recipefurniture.rf” » is required as a source of information.

Installation of wardrobe doors

I really liked the modern design and inexpensive price of this furniture. We fix the clothes rail at the required height, but not less than 50 mm from the top. The assembly of doors of any design begins only after the final completion of the installation of the cabinet itself.

Wardrobe Rome 180 assembly order

You can use the instructions for drilling for confirmations. All ready-made cabinets are in the catalog: Yulian Vladilenovich Popazidi, Lawyer, city. The seller is me - I’m not me, I’m the seller. Auntie called, but after a couple of weeks it was beyond the deadline and ran like a tongue twister. Mirror cabinet - compartment Rome-180 14,990 rub. Wardrobe 3-door RIM-150 9,990 rub. ABOUT THE PROJECT Mebika is a modern portal about renovation, interiors, furniture.

Rome 180 cabinet assembly diagram

In our showrooms, managers will be happy to help you purchase furniture for your home! Website: https://www.mebeldostupna.ru/ Place: Moskovsky Ave. bought a LUX bed! Wonderful!!

Assembling a sliding wardrobe with your own hands

Hello again. Today we will assemble our wardrobe, we will do this according to the instructions below. We also bought all the necessary accessories for the wardrobe and the necessary fasteners. Link to download the drawing: The introductory part is finished, let's start assembling.

Wardrobe assembly instructions

The procedure for assembling a sliding wardrobe will be as follows. You need to start assembling from the bottom of the cabinet, namely by assembling the base and installing the legs. Just when you screw the legs, do not overdo it (you can twist it, and the sharp part of the screw will come out from the back side). Do not tighten it with corners. front plinth, because to adjust the legs, you will have to remove it. Next, we will need to install the sides of the cabinet, the central partition and install the roof. On the bottom and on the roof of the cabinet (from the inside) we mark holes for installing the minifix rod. Next, along the marked points, we make holes with a confirmation drill, NOT through, 10-11mm deep, and screw in the minifix rod. The second hole is made at the end of the part, with a 6-6.5 mm drill, strictly in the center (8 mm from the edge). For a more detailed understanding of this assembly step, you can use our materials for installing an eccentric screed. The shelves can be made either rigid (secured with confirmations) or removable (on shelf holders). In order to have fewer plugs from holes on the visible side of the sliding wardrobe, I decided to install the shelves on shelf holders.

Sliding wardrobe “Rome-Veneziano series WT” 2700mm VIP Master

• Manufacturer VIP Master
• 60 month warranty
• Delivery time 15-25 working days

• Kyiv 180 UAH
• Bila Tserkva 90 UAH
• Brovary, Boyarka, Irpen 205 UAH
• Boryspil, Obukhov, Vasilkov 215 UAH
• Odessa, Nikolaev, Uman, Zhashkov 250 UAH
• Chernigov, Kanev, Kremenchug, Dnepr 250 UAH
• Lviv, Vinnitsa, Lutsk, Ternopil 250 UAH
• Khmelnitsky, Rivne, Zhytomyr 250 UAH
• Novograd-Volynsky 250 UAH
• Kuchurgan 690 UAH

• Description
• Characteristics
• Similar products 7
• Reviews 0

Dimensions, mm:

2701/2410(2210)/604(454)
Width:
2701 mm
Height:
2410(2210) mm
Depth:
604(454) mm
Material:
16mm laminated chipboard
Color:
white
Cornice “crown”:
white
Sliding system profile:
aluminum
Sliding profile color system:
white
Internal filling:
two wardrobe sections, two with shelves
Additionally:
drawers

Design options for facades of the “WT” series