at what height to hang cabinets in the bathroom

We bought a mirrored wall cabinet (with mirrors) for the bathroom.

We can’t decide at what height to hang this cabinet.

A wall cabinet with mirrors installed on the doors can be of different sizes, that is, the width and height of the cabinet are different, this is important to take into account.

The material used to make such cabinets is different; if a cabinet with a mirror is not at all expensive, then it is made of chipboard, chipboard is afraid of moisture, that is, such a cabinet must be protected from splashes on it, and this can affect its installation height.

The most preferable option is a cabinet with a mirror made of MDF and plus a special protective film.

As for the installation height, you must first decide where exactly the cabinet with the mirror will be mounted; there are also corner wall cabinets with mirrors on sale and they do not have to be mounted above the sink.

If we are talking about a cabinet like this with mirrors

Typically, cabinets are mounted at a height of 20-40 cm (and within these limits) from the edge of the sink.

Consider the height of the faucet spout; if the spout is high, you may have to mount the cabinet even higher.

Further, the installation height of the cabinet depends on the height of the users.

Decide on the height of the tallest family member.

The height of the top edge of the cabinet is equal to the height of the tallest user plus 20 mm.

But the installation height of the cabinet should not exceed the height of the doorway (its upper edge) in the bathroom; the approximate maximum installation height of the cabinet (along the upper edge) is 2 meters.

It is also important to consider the total area of the room and the height of the ceilings in the bathroom.

If there are children in the family, then take into account their height, for example, for children aged 5-7 years, the height from the floor to the bottom edge of the cabinet with a mirror should be 1.2 meters, in this case they will be able to fully use the mirror like adults.

Since this is a cabinet, and not just a mirror, it is important to take into account the height of the top shelf of the cabinet on which various bath accessories may be located.

In my bathroom, such a cabinet with mirrors weighs at a height of 30 cm from the edge of the sink, from the floor, 125 cm (this is the distance from the floor to the bottom surface of the cabinet).

Source

At what height should you hang bathroom furniture?

The modern bathroom has long acquired the status of a comfortable and relaxing corner of the home, where you can relieve stress and be alone with yourself. It is logical that ergonomics comes first when arranging a bathroom. It is not enough to successfully arrange objects in a horizontal plane; it is also important to choose their height correctly. Moreover, each family member may have their own preferences and physiological characteristics that will affect the comfortable use of the bathroom. Fortunately, there are general standards that you can follow when installing furniture and plumbing fixtures.

At what height should the vanity unit be installed?

It can range from 80 to 94 centimeters. There is no clearly defined standard; everything is very individual. However, it is generally accepted that an indicator of 80-85 sentiments will be optimal for most people. It is important to consider the type of installation of the sink. If it is built-in from above, you can focus on the height of the cabinet itself. With overhead sinks it is more difficult, since its edge is located higher than the furniture. It is best to choose a sink and a cabinet at the same time to calculate the total height and estimate how convenient their duet will be. If you plan to place a built-in storage system under the sink, you should first calculate its height. When installing suspended structures, it is also important to monitor the height of their placement.

At what height should you hang a mirror?

· all adult family members must fully see their reflection up to the shoulders;

· there should be about 10 cm of free space above the head in the reflection;

· the distance from the sink to the bottom edge of the mirror or mirror cabinet should include an area for the mixer; usually its size depends on the model and is about 20 cm;

· Do not place the mirror close to the sink, otherwise it will constantly be splashed with water.

At what height should I hang a column cabinet?

For ease of use of a column cabinet, its upper level should be no more than 2 m from the floor. All AQUATON collections are created taking into account this recommendation. In the case of compact hanging column cabinets, everything is even simpler. You can vary the height of the placement yourself based on personal preferences or place 2 wall cabinets instead of one column cabinet: this option is suitable even for the most compact rooms.

All the nuances taken into account in advance will allow you to enjoy the time spent in a comfortable and thoughtful bathroom.

Source

Marking rules and installation technology

Determining the height is half the process. The height of the mirror above the sink should be optimal for all family members. Next, you need to mark the wall taking into account the location of the fasteners.

Standard lighting creates maximum comfort

Installation on fasteners

The sequence of work is represented by the following algorithm:

Using a level, place the upper corner and central edge location marks on the wall.
Since the premises throw surprises at the owners in the form of uneven walls and floors, it is worth placing a piece of paper in this place in size (a piece of old wallpaper will do) and check by eye the horizontal and vertical positions relative to the other elements.
Measure the distance in the corners from the attachment point to the edge. Place marks and then drill holes for dowels or brackets. Since mirrors are made of heavy material, this should be taken into account during installation. Store consultants can help you select consumables that meet your load requirements.

Standard bathroom

To hang a mirror on fastening elements, spacers made of soft polypropylene moisture-resistant material are attached between the wall and the canvas. This is necessary to relieve pressure from the wall and fixing devices. When installing, the brackets are not fully tightened and leave a small gap.

Asymmetrical surface at height

Installation using construction adhesive or mounting tape

The order of these works is outlined below step by step:

When using these types of fastening, just as in the first case, marks are placed along the entire perimeter. The area under the mirror is thoroughly cleaned of unnecessary elements by drilling and carefully removing the tiles.
When drilling, paper tape is placed under the drill on the surface. This little trick helps maintain the integrity of the edges and avoid chipping. It is advisable that there is a gap of 2–5 mm at the edges from the canvas to the tiles on the wall for ease of installation. After the wall is cleared of all excess on the surface, it is cleaned to a smooth state. Unevenness will cause the mirror to stick unevenly. This situation is fraught with consequences in the form of moisture accumulation and fungus formation.
The reverse side is coated with construction glue or liquid nails. Apply mounting tape. Care must be taken to ensure that there are no gaps left. Install the mirror with support on the bottom edge. Then gently press it against the wall. For more reliable fixation, it is recommended to hold it for 15–20 minutes. You can use fasteners for fastening, which are removed after the glue dries.

In a gilded frame

Calculation of the position and cleaning of the wall is done when the mirror has already been purchased. Otherwise, you may encounter discrepancies in calculations and, as a result, additional work.

Rules for determining the height of mirrors and calculation examples

In large bathrooms, mirrors can occupy the entire wall, in standard ones - 1.5 m above the sink.

Installation height of a bathroom mirror above the sink

Small reflective surfaces in the bathroom above the washbasin are placed at eye level of an adult so that you can see the reflection up to the shoulders. And if there are children in the family, then you can determine the location for the reflective surface using simple calculations.

If you add 2 cm to the height of the tallest family member, you can get the level of the upper edge. And the bottom edge is at least 120 cm from the floor.

At this distance, children 5-6 years old will be able to look into the mirror on their own if adults provide a small bench for them to stand on. And younger children simply won’t be able to reach it and accidentally break it.

The installation height of the top edge should not be higher than the level of the doorway.

Options for installing a full-length bathroom mirror

Tall reflective surfaces expand the space and look presentable, but are not appropriate in every bathroom. To install such a ceiling-high canvas, there must be a free wall, which is rare in small bathrooms. On the wall where the sink is located, you can install a reflective surface across the entire width of the wall. But if it is placed on the sides of the washbasin below its level, the view will be unattractive.

When installing high mirrors, special attention should be paid to the reliability of the fastening.

Safety requirements when hanging mirrors

A mirror is perhaps the most dangerous piece of furniture.

Firstly, it may fall and crumble into small fragments;
Secondly, glass is quite heavy and can injure a person.

Therefore, when installing mirror panels, it is important to follow safety precautions. These include:

Reliability of fastenings;
No chips or other damage to the glass edge;
Tight fit to the surface of a wall or other solid base.

Advice: before mounting, it is advisable to cover the back surface of the mirror with a special film, which in case of an emergency will prevent the glass from shattering into pieces.

Harmonious mirror arrangement

If the interior allows, you can install a large or small mirrored cabinet, which will eliminate the need to attach open shelves for cosmetics, soap, etc. In small bathrooms, such a cabinet installed above the washbasin will save space, and in large bathrooms, a tall cabinet with reflective doors up to the ceiling with lighting will also be a wonderful decoration.

A reflective surface with an original frame or colored coating will help create a harmonious space. Sometimes designers recommend installing small matte additional mirror surfaces next to the main one.

The mirror can be of any shape:

The reflective surface must be installed so that it is completely open. A shelf with accessories under the mirror or other objects should not block visibility.

When choosing, it is better to give preference to moisture-resistant mirror canvases or heated ones; they last longer in conditions of high humidity and look more aesthetically pleasing.

Tips for harmoniously arranging mirrors in the bathroom

Aesthetics are affected not only by the height of the mirror, but also by its position in space. It is important to equip the bathroom so that the mood is not spoiled by the contemplation of an unkempt and inconveniently located mirror.

The ideal option is a mirror in the center of the wall, and shelves and cabinets are placed so as not to block visibility, that is, below, above or to the side of the reflective surface.
Beautiful framing, good lighting, free access to hygiene items - all this must be taken into account at the stage of choosing a mirror.

Careful planning and proper arrangement of interior items is the key to ensuring that one of the most visited places in the house will be comfortable and harmonious.

Markup rules

In order to securely fasten the canvas to the wall, you must first apply auxiliary markings:

When taking measurements, it is necessary to take into account all previous measurements and the height above the washbasin.

What distance should be between the sink and the mirror?

The height of the lower edge of the mirror from the washbasin should be 30-40 cm. This distance is enough to prevent splashes of water from flying onto the reflective surface.

How to hang a mirror on the wall without drilling?

In order to hang a mirror on the wall without drilling, polyurethane foam with a double-adhesive surface is better suited. The reason for this choice is simple - the ability to compensate for small unevenness on the wall surface.

Interesting materials:

What is cadastral tax on an apartment? What is a desk audit in a tax return? What is the OKTMO code in a tax return? What is the property tax coefficient for the tax period? What are local taxes and fees? What is the minimum tax according to the simplified tax system? What is personal property tax? What is personal property tax? What is car tax? What is property tax in this case for housing?

Tools and fastening methods

After marking is completed, you can begin installation. The two main methods of fastening are mechanical (screws, bolts, etc.) and chemical (glue, tape, other adhesives).

Bolts and decorative screws

Bolts and screws are the most reliable fastenings. Suitable for any canvas, even large ones. Mirrors are sold with holes for fastening and a set of fittings already drilled at the factory. Therefore, you won’t have to drill into the canvas itself, just the wall.

Such fastenings are also used for mirror cabinets. Decorative screws are preferred. They are more aesthetically pleasing than bolts and are secured with rubber gaskets that prevent damage to the glass.

Special staples and hooks

The good thing about the mounting method with brackets and hooks is that you don’t have to drill the mirror; holes are made only in the wall where the profiles are attached.

The canvas is clamped with brackets, which have special holes for fixing to holders or hooks pre-installed in the wall. If such devices are not included with the mirror, they can be picked up on the construction market. This mounting option is suitable for small and lightweight mirrors.

Tile adhesive

At first glance, gluing a mirror is simple. But you need to take into account the characteristics of the surface on which the canvas will be attached and the composition of the glue. This option is good if the wall is prepared as for laying tiles, that is, cleaned and puttied. Then the reflective sheet will either be recessed into the tile or be on the same level with it. This is done simultaneously with laying the tiles.

You should not glue it to the surface of the laid tiles; such an installation will be unreliable. For massive, heavy canvases, this method is unacceptable.

When choosing an adhesive, you need to pay attention to its composition, which may contain aggressive substances that destroy the surface of the amalgam.

Double sided tape

A good option for attaching lightweight sheets directly to the tiles. It is preferable to choose adhesive tape that is moisture resistant and has a good shelf life. The wall and the back side of the canvas must be degreased, dried thoroughly and glued to it with strips of tape. After this, remove the protective film from the adhesive tape and apply it to the wall according to pre-designated guidelines.

To ensure a strong connection between the pieces of tape, silicone moisture-resistant glue is applied. It is possible to fasten the adhesive tape not with long strips along the canvas, but with short ones - glued in a checkerboard pattern.

Liquid Nails

If the mirror is large enough and needs to be fixed to the wall without removing the tiles, and mechanical fastening methods are impossible for some reason, there is only one method left - liquid nails.

When choosing a product, you should definitely pay attention to its characteristics - moisture resistance and lack of aggressive properties. There are special compounds designed for gluing reflective sheets.

Wall and mirror surfaces are degreased. After they have completely dried, the adhesive is applied both to the wall and to the back side of the canvas. On the back surface of the mirror, a layer of glue should run along its perimeter, at a distance of 2 cm from the edge, and in the middle of the canvas it is better to make an adhesive grid. After this, the mirror is pressed against the wall and held for the time specified in the instructions.

Source

How to markup

The reliability of the fastening, the convenience of users, and the favorable visual perception of both an individual object and the space as a whole depend on the correctness of the markings.

It is first necessary to determine and draw on the wall the central axis and the border of the lower or upper edge of the mirror canvas.

Apply an existing mirror to these boundaries to outline the corners. After this, make markings for the fasteners. If space allows, then simultaneously make markings for additional lighting fixtures.

It can be difficult to determine the center of mirrors with complex configurations, so it is advisable to call an assistant who will assess the location “by eye.” After the marking stage, you can proceed to choosing the method of fastening and directly to installation.

Hanging bathroom cabinet - at what height should it be installed? (30 photos)

Bathroom wall cabinets are currently one of the most commonly purchased furniture solutions. While they require a rethink of hanging location and precise assembly, their style and functionality are a huge benefit.

Find out from us at what height to install wall-mounted bathroom cabinets so that they can be used safely and comfortably.

Hanging bathroom furniture is not only aesthetically pleasing, but also very practical. This is especially good for small bathrooms where every centimeter matters. Unfortunately, compared to regular furniture, installation of wall-hung models is longer, more labor-intensive, and requires precise measurements of the space - not only for installation, but also for you to enjoy using it. At what height should you install wall-hung cabinets in your bathroom to make them comfortable to use?

Features of choosing bathroom mirror parameters

In the bathroom, it is desirable to use moisture-resistant mirrors, however, the recommended parameters should be followed to protect the canvas from splashes of water or other types of contaminants.

Ideal options are canvases that are no higher than the door frame.
A rectangular canvas looks more advantageous.
But the ideal aspect of the location is convenience for the whole family, you need to choose a height that is comfortable for everyone, it is ideal to see your reflection without bending over or jumping in place. We choose the golden mean.
A wider canvas will add more light to the bathroom and visually raise the ceiling.

A canvas that hangs in compliance with all parameters will certainly give a decent look to the room and will be positioned harmoniously. Seeing your reflection exactly in the center always brings pleasure.

Subscribe to our Social networks

Hanging cabinets for the bathroom - let's start with size

Before you think about how to install wall-hung cabinets in your bathroom, consider choosing the right model. To do this, it is worth considering the amount of storage space required and the size of the bathroom.

Shops include under-sink bathroom cabinets, tall columns, large hanging cabinets, and wide or narrow chests of drawers. You must remember that you should not overload such cabinets, so try to choose models both for the capabilities of our bathroom and the number of things you want to store.

What depth of hanging cabinets should I choose?

A very important parameter determining the purchase of hanging cabinets is their depth. We differentiate cabinets with depths of 15, 20, 25 and 30 centimeters.

The first of them are most often used in small bathrooms. They don't have much capacity, so they won't be suitable if you want to store larger items or cleaning supplies in them.

Hanging cabinets with a capacity of 20 cm are definitely a better solution than 15 cm models. They are suitable for cosmetics and cleaning products. Manufacturers offer many 20-centimeter models with different textures and colors. If you choose the sliding door option, it can also be used in bathrooms with a small space.

Cabinets that are 25cm deep can also fit, but careful consideration must be given to purchasing and assembly. While corner models this deep won't be a problem either (provided you have enough space in the bathroom), a cabinet over a sink this deep can be a big problem, limiting space in the laundry area.

Cabinets with the greatest depth - 30 cm - are definitely not recommended to be installed directly above medium or small sinks. This choice will definitely become an obstacle in your daily routine in the bathroom.

Placement nuances depending on the type of product

Finding a place to hang a mirror in the bathroom is rarely a problem. Usually there are few options. The main areas for placement are:

Mirrors above the washbasin are the most logical solution for the convenience of hygiene procedures and makeup application.
A cabinet with a mirror allows you to organize your space. At the same time it serves as a storage place for hygiene products, cosmetics, and detergents. If you install a mirror above the sink with hidden shelves, there will be no need for additional furniture.
Built into a wall or niche. Pros: saving space without sacrificing comfort. The location always looks advantageous, but may require additional costs. In addition, if the canvas breaks or gets tired, it will be much more difficult to change it than just attached to the wall. The recommended depth for such an arrangement of built-in products (including wall tiles) is 6–8 mm.
Full height. The product can be free-standing, attached to a wall or door. It expands the space, looks impressive, and gives you the opportunity to see yourself from head to toe. When choosing at what height to hang a mirror in the bathroom, you should keep in mind that a product that is too large (up to the ceiling) is not always convenient. And it’s more difficult to keep it clean. It is better if its height is level with the top border of the door frame.

Options for the correct placement of a mirror in the bedroom according to the teachings of Feng Shui
When looking for a place to install a mirror in the bathroom, you need to consider what objects will fall into the reflection zone. It is highly undesirable to hang it opposite another canvas. Otherwise, mutual multiple reflection will create the effect of an endless corridor.

Above the washbasin

Cabinet with mirror

Wall mounted

Full length

At what height should I install a hanging cabinet for a bathroom and how to do it?

Before you begin installing your bathroom cabinets, let's refer to the manufacturer's instructions. Even if it seems to you that you are perfect “craftsmen”, you may miss something. Reading the instructions will help you avoid such mistakes. Before starting assembly, make sure we have all the necessary tools and materials, especially fasteners, which are not always included with cabinets.

Installing a wall-mounted vanity cabinet (and more) starts with unpacking all the elements. Then you measure the height at which you want the cabinet to hang. The cabinet together with the sink should be between 80 and 90 cm high, it is best to take the average measure, that is, 85 cm.

The next step, which requires precision, is drilling the holes to install the cabinet mounting strips. You install them using plugs and then hang the cabinet on them.

Expert advice . Before assembling the hanging cabinet, make sure what the walls you want to attach it to are made of. This will depend on which connector you choose. If cabinets are to be hung on hollow or perforated bricks, you will need special dowels or anchors for use in hollow core materials.

When the cabinet is hanging on the mounting strip, check its strength and levelness. If the cabinet does not hang level, it will affect the proper functioning of the cabinet. The complete installation is completed by placing the sink on the wall cabinet. Next, use silicone where the wall mounted sink cabinet meets the wall.

How to hang a cabinet on the wall step by step instructions

Which grout to choose for treating the surface of tiles in the bathroom

Wall cabinets come in three types:

horizontal;
vertical;
corner.

There is no fundamental difference in the technology of attaching them to the wall. To work you will need a set of tools and accessories:

roulette;
construction level (spirit level);
marker;
hammer drill with drills with a diameter of 8-10 mm;
hammer;
pliers;
shaped screwdriver.

As a rule, the cabinet is already equipped with hinges for hanging, but anchor bolts, plastic fillers and hooks for hanging should be purchased.

If the wall in the bathroom is made of concrete or solid brick, the following should be done to hang the cabinet.

Using a tape measure, mark the desired upper level of cabinet mounting. A marker is placed on the wall corresponding to the location of one of the loops. The distance between the centers of the eyelets of the hinges is measured and set aside from the first mark

It is important that both holes are at the same level, which is controlled by the spirit level. Using a hammer drill, holes are drilled to a depth corresponding to the length of the plastic filler. In the event that it is necessary to drill ceramic tiles, the impact mode should be turned off by moving the hammer drill lever to the simple drilling position

Once the tiles have been drilled, the hammer drill's hammer mode can be used again. Plastic fillers are hammered into the resulting holes with a hammer. The hooks are screwed in, for which you should use pliers in the final stage.

The cabinet is hanging.

To hang cabinets on walls made of fragile materials (for example, made of gypsum blocks), hooks with plastic fillers should be replaced with anchor bolts. Heavy cabinets require fastening not only at the top, but also at the bottom. For this purpose, special support brackets are used.

Recently, special fastening strips and special devices (canopies) are used to hang cabinets in a hidden way. This method is especially convenient if you need to hang several cabinets on the wall at the same level. To do this, first fix a common fastening strip of the required length in level. After this, fasteners (canopies) are installed on the cabinet bodies and then the furniture is hung.

In conclusion, here is a video that reveals some of the nuances that arise in the process of hanging a cabinet.

Wall cabinet with mirror

It is also worth mentioning the hanging wardrobe with a mirror. This is a very functional solution that is suitable for any bathroom.

There are many types of mirrored cabinets in the market. You can choose from two or three door models. In addition, if you want lighting in the wash area, then purchase a hanging cabinet with a mirror equipped with LED lighting.

The question remains - at what height should this type of cabinet hang? To comfortably enjoy the delights of the mirror, our eyes should be at a height of 3/4 from the bottom edge of the glass. It is this parameter that we should be guided by when installing a mirror cabinet above the sink.

No. 2. Mirror wall cabinet

Mirror cabinets are found among vertical, corner and horizontal options. The convenience of such pieces of furniture is obvious, because the cabinet allows you to completely replace the mirror, which is a mandatory attribute of the bathroom. It turns out that when buying a model with mirrored doors, you can save not only space, because you won’t need a separate mirror, but also money.

Bathroom cabinet - what else is important to know?

Bathroom cabinets should be functional. The door should close and open slightly, have strong hinges and a comfortable handle, the same applies to drawers. If the bathroom has many compartments and shelves, each member of the family will probably put their toiletries in it and find them easily.

Check if your bathroom shelves are too narrow or too small. The distance between shelves should be adjusted to the size of toiletries and cosmetics.

The bathroom, like no other room in the house, is subject to frequent changes in humidity and air temperature, so hanging cabinets must have a special finish. It is very important that both their bodies and facades are made of furniture boards with increased moisture resistance. The type of finish on the front door elements and drawer fronts is also particularly important. This can be a special veneer, protected with two-component waterproof polyurethane varnishes.

The correct manufacturing technology for these coatings is no less important. When purchasing, make sure the cabinet is properly finished. It is unlikely that you will check this yourself, so ask the seller. He must know the product he is selling, although he is not obliged (the manufacturer is not obliged to include a technical description of the furniture).

Wall cabinet for the bathroom - which one is best?

Selecting a mirror

When choosing a mirror, it is important to pay attention to its susceptibility to moisture. For the bathroom, the best equipment is the one on the back of which is applied a special composition with aluminum or silver.

For the bathroom, the best equipment is the one on the back of which is applied a special composition with aluminum or silver.

The presence of a moisture-resistant coating is indicated by the blue or green color of the reverse side of the mirror.

A purple tint on the back wall means the mirror is unsuitable for the bathroom.

The coating, which includes silver, is of the highest quality. Currently, products made from silver amalgam with several layers of special varnish that perform a protective function are popular. But their cost is much higher.

Also, when choosing a mirror, it is important to pay attention to the following points:

Product size. The larger the mirror, the better. It is advisable to choose the maximum allowable mirror size in terms of room parameters. If there is a significant difference in height between family members, you should choose a product with a vertical shape.

Smoothness of the reverse side. The presence of roughness, scratches or defects indicates poor quality.

Weight. The more a mirror weighs, the longer it will last.

Reflection quality

It is important to ensure that objects are clearly displayed across the entire surface of the mirror.

Reliability of fastening elements. Poor fasteners will significantly complicate the installation of the product.

Frame material

The mirror can be framed. Preference should be given to materials that resist corrosion and deformation under the influence of moisture (steel, plastic).

Mirror and frame style. The product must fit into the overall design of the room.

An excellent option is to replicate the shape of the room and the bathtub itself above which it will be mounted.

For a high-tech room, a mirror of a regular geometric shape without a frame is suitable, while in a classic bathroom a product with an ornate frame will look harmonious.

Where to buy hanging bathroom cabinets?

The best place to find bathroom furniture is where plumbing fixtures are available—in bathrooms, at a home improvement center, or at a specialty plumbing store. You can count on professional service. Additionally, by actually looking at hanging cabinets in their natural surroundings, it will be easier to choose a piece of furniture or mirror that suits your bathroom.

Hanging cabinets can also be made to order. If the bathroom is small, you should use mirrors that will visually increase its space. In addition, the standard should be sufficient for us, that is, a shelf under the mirrors or perhaps bathroom cabinets under the sink. However, where possible, it is worth having cabinets for towels, cleaning products, toiletries, and underwear.

As we already mentioned, a wall-hung cabinet is ideal for a modern bathroom. This is an elegant solution for small interiors - the free space between the bottom of the cabinet and the floor will provide an optical increase in space, and will also allow you to stand as close as possible to the sink. The aforementioned space between the bottom of the cabinet and the floor is both a plus and a minus - on the one hand, it allows easy access to dusty niches, on the other, it requires more frequent and thorough cleaning.

Source

No. 3. Closed and open lockers

Depending on your own preferences and what will be stored on the shelves of the wall cabinet, you can choose one of the following options for its design:

open;
closed;
combined.

A closed cabinet means that the entire contents of its shelves are completely hidden behind the doors. This is the most popular option, as it can provide stored items with protection from condensed drops of moisture. In addition, with closed shelves it is much easier to keep the bathroom tidy.

Open cabinets , as a rule, are used for purely decorative purposes; they are equipped with spacious bathrooms. Combined models are a more practical option that allows you to organize convenient storage of things with different purposes and frequency of use.

Features of furniture arrangement in the bathroom

The daily convenience and comfort of the residents, as well as the service life of the plumbing fixtures, depend on how the placement is done, since this reduces the risk of damage to the installed equipment as a result of the breakdown of fasteners.

When arranging furniture in the bathroom, the following factors are taken into account:

Items can be purchased as a set, individually or made to order - modern furniture production provides property owners with ample opportunities.

How to properly place furniture in the bathroom

In addition to the general style and design, in this case you need to take into account the ergonomics of the room. To do this, you can hire a designer or do it yourself if you have experience and a creative streak. After developing the layout plan, installation begins.

When planning furniture in the bathroom, its functionality and intended purpose are taken into account. So, if washing supplies will be stored in the cabinet, it should be accessible at arm's length or half-arm's length.

It is advisable to store active detergents (bleaches, grease removers, stain removers, solvents) out of the reach of children. This could be the top shelf of a cabinet. In addition, the arrangement of furniture in the bathtub can take into account the installation location of the washing machine and plumbing fixtures.

Residents of Kirov and the Kirov region often think about the question of how to install a vanity unit so that it is beautiful, smart and practical. Traditionally, it is placed closer to the door, on the left or right, depending on the configuration of the room. If the bathroom is shared, then next to the toilet or opposite it.

The arrangement of furniture in the bathroom is largely determined by its area, since it should not be too crowded so as not to hit your head on wall cabinets and not experience discomfort when cleaning in hard-to-reach places.

Along the solar plexus line minus 2 centimeters

These are the optimal dimensions for installing a mirror, but if for some reason the size of the mirror itself does not allow it to be installed according to these marks, and there is not enough money to buy a new one, then you can hang the mirror at the height level of the tallest person, but not lower than the chest level of the shortest person ...

Stand in front of the sink.

Reach out the hand you will be using to wash the mirror and find the highest position you can reach. This will reveal the top point of the mirror.

If a shelf for small items is planned under the mirror, then neither it nor its contents should obscure your reflection. This will be the low point.

Lateral restrictions on the size of the mirror are dictated by the distance to the wall or other vertical dominants (curtain, cabinet wall, hanging towel).

I would also pay attention to the width of the sink itself, if you can control this measurement. This means the shortest horizontal distance from you to the mirror.

Teeth-brushing and shaving family members tend to splatter the mirror during these procedures if it hangs too close to them.

The height at which a mirror should be hung is determined for each specific situation. This will depend on the growth of family members and the ease of cleaning

It is important that you can see your face in the mirror, and the location of the mirror is convenient in this regard. At the same time, ease of cleaning (washing) the mirror is also important, i.e.

any point must be reached with a rag. An important indicator will be the width of the wall to which the mirror will be attached and the shape of the mirror and its size.

I believe that there are no standards like GOST here. The main thing is that people feel comfortable. Therefore, the height, in my opinion, should depend on the height of the people who will use this bathroom. For example, there are no tall people in my family, so all the shelves in the house and the mirror in the bathroom are adjusted to our height. I love it when I see myself in the mirror up to my chest and even a little lower. And I prefer a large mirror size, so the mirror in our bathroom is quite large and rectangular in shape.

The size of the mirror in the bathroom, and not only in the bathroom, depends only on the residents of the house/apartment, because it is solely for the convenience of the residents, and not for non-functional beauty, that is, if there is a tall person, let him go to the wall and mark the level at 2- 3 cm above the head, and children or the shortest person approaching the wall will mark a mark at least 2-3 cm below the chin, or better yet even lower if the sink and furniture or household appliances allow, the width should be approximately 1/3 of the height, and then whatever your heart desires, a mirror of this size will please everyone, children, while brushing their teeth, will not jump into the mirror configured for mom, and dad, while shaving, will not bend over into the mirror configured and hung on the wall under the strict guidance of his wife and her personal convenience - as usual It’s common in our families, where for some reason it’s accepted that a man doesn’t look in the mirror!

What fastenings and at what height to hang a cabinet in the bathroom

First of all, the height of the cabinet above the sink depends on whether it includes a mirror in its design. If yes, then we hang the cabinet taking into account the recommendations given in the next paragraph.

In other cases, the height of the bathroom cabinet above the sink is determined by the location of the plumbing fixtures and furniture. Consider the placement of the tap and pipes, the symmetry of the bedside table below, and the shelves with hygiene items. Before hanging, draw a schematic plan with markings expressed in cm or mm. In order not to deviate from the standards, the distance from the floor to the bottom edge should be 185-190 cm. The height of the cabinet with a mirror in the bathroom is from 100 centimeters from the floor, and it should not rest on the tap.

Another important question is how to attach the cabinet to the tile. It must hang securely so as not to fall off the wall in order to avoid injuries and damage to plumbing equipment - a break can cause a broken sink bowl or a broken faucet.

The best way to mount a bathroom cabinet on the wall is with regular wooden choppers into which special metal hooks are driven. To drill a hole in the wall you will need a drill. You need to work carefully so as not to damage the tile when drilling and driving in (screwing in) fasteners. To distribute the load evenly, a wooden plank is installed between the fasteners.

Mirror installation process

Bathroom tiles: how to choose 42 photos suitable

The installation procedure for the product depends on the selected installation method.

Glue mount

The advantage of this method is that there is no need to use fasteners that may be visible on the front of the mirror.

Special liquid nails or adhesive-sealant are used as fasteners. You need to choose only those compounds that are suitable specifically for fastening mirrors.

Any unsuitable glue will damage the surface of the mirror or not provide a reliable result.

Before gluing, it is necessary to apply putty and primer to the wall surface. It is prohibited to mount the mirror on top of acrylic paint and plaster, as they have a negative effect on the moisture-resistant coating. If installation is planned to be carried out over tiles, then it must be thoroughly cleaned and degreased.

The glue should be applied to the back surface of the mirror, after which the product is pressed against the wall for 10-15 minutes until the glue has completely hardened.

Screw mounting

This fastening method is chosen when the product weighs significantly. Screws can be included with the mirror or purchased separately. The number of screws is calculated based on the size and weight of the mirror.

In addition to the screw and dowel, rubber gaskets must be available. Also, to achieve greater aesthetics, you should use special decorative plugs that best suit the style of the bathroom.

If the mirror is sold with ready-made holes for fastening, then all that remains is to attach it to the wall with screws. The absence of such holes greatly complicates the task.

You can drill them using a diamond drill of the required diameter. While drilling, it is necessary to constantly cool the surface of the mirror so that it does not crack. The resulting holes should be sanded.

Be sure to use rubber gaskets on the back side between the wall and the mirror, as well as between the mirror and the plug on the front side of the product.

Installation with double-sided tape

This mounting method is the simplest, but is only suitable for light weight mirrors. The tape itself must be moisture resistant.

The adhesive tape must be cut into strips of the required length and attached with one of the sides freed from the protective film to the back surface of the mirror. Then the protection is also removed from the second side of the tape, after which the product is tightly applied to the wall.

If the mirror is mounted in a special recess without tiles, then all joints between the product and the tile must be treated with silicone sealant.

It is important to understand that installing a mirror is a fairly complex technical procedure, which can result in damage to the product. If you do not have the necessary skills and tools, you should entrust the installation of the mirror to professionals

Thus, the non-standard placement of the mirror above the bathtub has its advantages and disadvantages. The size of the mirror, its location and design must fully correspond to the parameters and style of the bathroom in which it will be installed.

The mirror can be mounted using glue, fasteners, or double-sided tape

During the installation process, it is important to exercise extreme caution so as not to damage the product.

Correct installation of a bathroom mirror cabinet above the sink

Wall-mounted cabinet furniture with mirrored shelves and doors is the most popular. With the help of such items it is easier to hide wall defects and find a place for all kinds of small accessories. In this case, the format of the mounted model is not so important; the space where this accessory is located is much more important.

Let us remind you that mirrored cabinet doors can open in different ways:

left;
right;
swing doors towards you from the center;
one surface is sliding, the other is fixed (right or left);
both halves of the door facade are shifted to the right and left.

When choosing from a catalog or in a supermarket, it is important to imagine how and where this item will function.

Agree, it is inconvenient to open a cabinet built end-to-end, for example, in the left corner, if the door opens in the same direction. Most often, right- and left-handed models are produced at a furniture factory. For the opposite option, you need to ask a sales floor consultant or contact the managers to clarify the assortment.

Facades - views and decor

Facades may differ in:

Open. The valves are completely absent. Everything you put inside will be visible;
Closed. The cabinet system includes movable doors behind which the contents can be hidden;
Combined. Some of the shelves will remain visible. The rest of the space will be covered with doors.

The best way to make your cabinet unique is to choose the right decor:

Fusing. Colored pieces of glass are placed into an ornament and sintered at high temperatures into a single layer. This is a kind of glass “casserole”. Next, all this is transferred to a thick self-adhesive film. The fusing technique will not only create a unique design for the facade, but will also provide good protection for it. Just stick it yourself;
Mosaic. For it, it is better to select materials with good resistance to water. These can be pieces of mirrors, colored glass, or natural stone veneer. Requires meticulousness and patience in production. But the final appearance is beyond praise;

Eco leather. This is one of the synthetic varieties with a complete imitation of the texture and pattern of natural leather. Soft, greatly facilitates the process of tightening. Very pleasant to the touch. The pronounced pattern with deep grooves can accumulate dust. But, at the same time, the material tolerates washing well;
Decorative glass. If you don’t like the fact that the glass does not hide the inside of the cabinet, then use lakobel (the inside is painted). Milk glass would be a good option. It is etched with acids while maintaining gloss. But matted will be rough. Laser engraving allows you to apply a detailed pattern of any depth (volume). In the end, the glass can simply be tinted. All of these methods partially or completely deprive glass of the ability to transmit light. This means visibility will be almost zero.