Do-it-yourself waterfall in the wall in an apartment: stages of work for water decoration, tools and techniques for creating a large or small waterfall

You can decorate the interior of an apartment or private house with an unusual element using an indoor waterfall.

In addition, it performs a health function: it humidifies the air, which in the apartment, especially in winter, becomes very dry.

Also, a DIY indoor waterfall helps relieve fatigue and emotional stress.

Therefore, it is not just an interior decoration, but makes the house more comfortable and promotes peace of mind.

Easy and simple way to make a home waterfall

Page navigation

Home or apartment waterfalls are not a common phenomenon, since such structures are often installed in various institutions and public places. However, despite all the features and nuances of the process, it is quite possible to make something like this on your own. You can place your own waterfall both in the country house and in the apartment.

We install waterproofing of thresholds

Thresholds require high-quality waterproofing. The film used after the construction of the pool is used as film. Any waterproofing fabric and agrofibre are also suitable.

Waterproofing is done on both sides, leaving a slight overlap on the curbs.

After the waterproofing work is completed, the installation of decorative stones begins. They are attached to the waterproofing; a moisture-resistant sealant is chosen as the glue.

DIY materials and tools for a water wall

There are several basic design options for a water wall that you can build with your own hands. Depending on the wishes and preferences of a particular person, the options for materials used may vary. In some cases, the basis will be wood, in others organic glass, and a combination is also acceptable. Depending on the selected materials, dimensions and location of the structure, the set of necessary tools will also change.

Basis for the cascade

The base must meet several requirements:

be moisture resistant;
wear-resistant;
be resistant to temperature changes.

Typically, concrete blocks are chosen as the base, which are then decorated.

These blocks are used to form a cascade of the required height; they can be left unattached to each other.

The first stage is positioned in such a way that it partially covers the place where the communications are located.

Subsequent steps are always smaller than the previous ones.

The lowest step is decorated with a border, which is subsequently decorated.

Where water outflow is planned, the walls are made smaller in height.

Do-it-yourself waterfall wall in an apartment: how to make it

In order to make a wall waterfall on glass, you will need the following materials:

pipes and fasteners;
hose;
veneer;
pump;
moisture-resistant plywood;
boards;
tin;
light bulbs and wires.

Next, we will consider one of the simplest and most affordable ways to make a water wall with your own hands.

Manufacturing technology for the bottom box

Before starting work, you should clearly determine the dimensions and location of the future waterfall, since this will directly affect the entire further process.

The first step is to make a wooden box, the size of which must correspond to the size of the bottom edge of the glass. Since the bottom box is the base and basis of the entire structure, it is it that largely determines the dimensions. Pour polyester-based resin into the box in several layers.

For greater decoration, fragments of multi-colored glass can be added to one of the layers. After the resin has hardened, the frame around it should be carefully removed and the resulting mass of resin can be used as the bottom of a waterfall.

Making the top box

Afterwards, glass is installed, directly along which water will flow.
To do this, you will need two boxes made of wooden boards treated with varnish and stain. The glass will fit in and be secured between them in a vertical position. A hole should be cut in the back wall in one of the boxes for the hose. In the upper part there will be screws fixed in the form of hooks equidistant from each other. After this, a bar is mounted, which will divide the waterfall into two parts.

LEDs can be installed on the above-mentioned distribution strip, based on the individual preferences and taste of the owner. Next, the hose and pump are placed in the upper part of the waterfall body, where the extension will also be located.

After this, a plastic pipe is taken, in which six holes are cut at intervals of five centimeters. A plug is placed at one end of the pipe, and an adapter at the other. Next, the pipe is secured in such a way that it is evenly filled with water during the operation of the waterfall.

Next, a gutter is made from a plastic pipe, which will have two plugs at the edges. Now the pan is filled with water and installed inside the box, and the hose is connected to the pump and lowered into the water.

At the final stage, the boxes are attached to the wall along with the hose. The backlight and pump are turned on to check the functionality of the entire system. If necessary, you should adjust certain parameters.

Lighting

Competent and appropriate lighting in a wall waterfall is one of the most important elements of the entire structure.
The degree and manner of lighting can not only affect the appearance of a waterfall, but also change the observer's perception of it. You can use various lighting options:

LED bulbs;
halogen lamps;
fiber optic;
fluorescent;
wide-range.

Modern technologies make it possible to install sound accompaniment. The main thing here is to maintain a balance of lighting and colors so that the presence of a waterfall in the room creates a calm and peaceful environment, rather than annoying with bright light at any time of the day.

Communications

Necessary communications to create a waterfall:

pipes that will be in the water treatment system;
a device that collects the top layer of water and supplies it to the filter;
wires for lighting.

The entire filtration system is installed at the bottom of the container.

In the future, they can be hidden by decorating with stones. All these communications are positioned in such a way that the shield is close to the waterfall itself.

Important! At this stage of work, be sure to check the operation of the pump!

Wall waterfall: operating features

One of the main features in extending the performance of a home waterfall is its correct installation.

Properly selected, assembled and installed elements should operate reliably and without failure. If the water blooms in the receiving bowl of the waterfall, or plaque appears on it, you can use specialized chemicals, or correct the situation by installing filtration equipment. At the end of each season, it is recommended to remove the pump from the pond and clean it.

The article discussed the issue of home, apartment and garden waterfalls. In addition, a method for making your own design was presented, which every home craftsman can handle.

Installing equipment

This is the final stage in the construction of an artificial waterfall. The compressor is attached to the bottom of the tank, a device is installed on the surface to collect the top water and filter it, all other equipment is placed in a shelter built nearby.

Decorate the waterfall to your taste, you can plant plants that love moisture nearby, and lay out the bottom with beautiful gravel.

This design will perfectly humidify the air in the summer!

LiveInternetLiveInternet

Choosing a location for installation

It is best to place a waterfall wall in a passage area, for example, in:

wide corridor;
hall;
hallway;
space near the stairs (for those who have a two-story apartment).

Such places are usually not used to their full potential, but a waterfall will create the appropriate atmosphere and enliven the interior. You can also place a waterfall wall in the dining room or living room to decorate them. A waterfall is great as a zone divider.

Additional aspects and tips:

It is not recommended to install a waterfall in living rooms (for example, in bedrooms), because the incessant noise of water will begin to irritate after a month or two;
the system requires constant power, sockets providing this must be carefully closed to prevent accidental entry of water;
the size of the open space around the waterfall must be at least 30 square meters so that water evaporation does not exceed the permissible possible humidity of the room, otherwise this may lead to damage to decorative materials, for example, peeling of wallpaper.

How to make a small waterfall on the wall in your apartment with your own hands: technique, stages of work, recommendations