How to cover a mirror on a closet beautifully

What is the best glue for mirrors - Abro or Titan?

There are mirrors in every home.
They are often built into furniture, for example, in wardrobes or bathroom cabinets, but in some cases they have to be mounted on the wall. The easiest way is if the finished mirror is in a frame, then installing it will not be difficult. And if you have to attach it to the wall, and even more so if the accessory is large, for example, from floor to ceiling, you will have to put in some effort and, of course, high-quality mounting adhesive for mirrors.

Hanging or gluing a mirror requires careful planning. When calculating the dimensions, it is important to take into account that the mirror should not touch other objects, otherwise cracks may subsequently appear.

Dismantling

It didn't take much effort to remove the mirror panel from the cabinet. I took the mirror on both sides with both hands, carefully lifted it up and pulled the bottom of the panel toward me. At the bottom there are rollers on which it is held, and removing it from them is not difficult. Then I turned the mirror over and placed it on the large rectangular table.

Mounting methods: which is better to use?

Let's consider how you can attach a mirror sheet to a cabinet door, what is the best way to glue it? You can fix the mirror on the surface of the cabinet using :

mounting double-sided tape;
special adhesives and liquid nails;
mechanical fastening method.

When choosing a fastener, focus on the quality and reliability of the materials. Incorrectly glued or screwed sheets can damage the mirror coating and also cause injury to others.

Mounting double-sided tape

The simplest of the options.
Construction tape will quickly glue and securely hold a small element on the surface of the cabinet. Its cost is low, and you can find it in every hardware store or car accessories store. But the choice of material must be approached responsibly. For installation, you will need a high-quality foam version with a thickness of at least 0.8 mm. The temperature regime for working with it must be no less than 10 and no more than 25 degrees Celsius, otherwise adhesion to the surface will not be performed efficiently.

Comments

That’s it, even pranks should not be reflected (they say the husband will “go for a walk”)

Well, it’s convenient to blame the mirror if suddenly a man went on a spree)) Who else is to blame then) I haven’t gone out for a hundred years, and then they hung up a mirror, looked at my wife from the side and went on a spree

All. I'm under steel. Are there still those who believe in this nonsense? Half of my role-playing games are with a mirror. Can't do without him! This is all the fun!

Apply a design using stained glass paints. Cover it with something beautiful. like making decoupage, only big.

Oh, I had exactly the same idea, but I want it to be partially sealed, cut out using a stencil, but where can I get it?

This is exactly the option that suits me, but where can I find it!

I don’t need mirrors in the bedroom either (at least with the bed reflected) it’s not about sex. a mirror is not a simple object, and it is better for a sleeping person not to be reflected in it

And here the lovers of toilet bows and the lift of bows really hit it))

So. signs: 1) You can’t look in the mirror at night! Moreover, it is strictly forbidden to look in the mirror during the full moon.

How do you wash and comb your hair before going to bed?

2) You can’t look while you’re sick. The disease will “reflect” and the duration of treatment will double

And if you’ve been sick for a long time, for example a couple of years, you walk around like a pig, unkempt, unwashed and unmade up?

3) You cannot look into the eyes of your own reflection for a long time, as this leads to early aging.

Oh my. How to put on lenses now? And in general, it is not recommended to look in the mirror for a long time.

Materials and tools

Depending on the mounting method, you need to buy in a hardware store:

liquid Nails;
silicone;
glue;
double sided tape;
or holders.

If you use glue or silicone, you also need a solvent to degrease the surface of the furniture before the gluing procedure.
Prepare the following tools:

tape measure or long ruler;
gun for applying silicone;
rags for applying solvent;
screwdriver;
gravity to press the joint after applying the adhesive.

Sequence of work

Whatever material you are gluing to, its surface should first be prepared. First you need to clean the surface of all types of contaminants and degrease it. If necessary, the surface is leveled with plaster and putty. If we are talking about concrete, then leveling is carried out, putty and primer are applied. Untreated wood requires the application of special products that will reduce the absorption of the adhesive composition. The general principle of work is similar, but individual surfaces have features that should be taken into account when gluing.

Selecting options

So, we have listed possible ways to decorate sliding wardrobes, starting with the use of ordinary photo wallpaper and ending with high-tech self-adhesive film.

Which option is preferable?

Undoubtedly, ordinary photo wallpaper for a wardrobe is a preferable option in terms of cost. But there are complaints about the strength and durability of such a coating. In addition, the image quality on simple paper wallpaper leaves much to be desired.
Using a self-adhesive film that imitates the surface of natural veneer is a good option, provided that you have sufficient experience in gluing these surfaces. In addition, the price of such self-adhesive is high, and finding a roll of the required width can sometimes be problematic.

Fabric pattern

My first experience was gluing to the surface of a tapestry. It was on the same back side, and I took it off easily.

But since in this case I had to select a pattern, I decided to make the surface white. For this purpose, thick fabric was purchased in a size similar to the size of the panel itself.

Hungarians prefer to eat canned food: weight loss secrets of different nations

Towel ladder and a few more inexpensive ways to style your bathroom

Tiny apartment for rent in London. But people are confused by one thing

I placed it on the mirror and carefully cut out a rectangle. You can measure the length and width and that will be enough. Make sure they match completely.

How to attach a mirror to a closet: what methods are there?

I bought a new mirror for the closet, but now I don’t know how to attach it. Can you tell me the mounting method?

It is possible to mount either on special Mirror (glass) holders. There are quite a large number of them, varying in size, texture, methods of fastening, etc.

All of them have one common drawback: they are visible, that is, the fasteners protrude from behind the mirror. But at the same time, the mirror can be dismantled and removed at any time. Only small holes from the screws will remain, which can be covered with furniture wax.

There is a second method of fixation - gluing. The method of gluing on silicone is quite popular among furniture makers:

Remove the door on which you are going to stick the mirror and degrease it. We do the same with the mirror itself.

Apply silicone to the back of the mirror (in stripes)

We place the mirror on the façade, align it in place and apply pressure for a day. In 24 hours you will want it, but you won’t be able to tear it off)))

The method has two disadvantages: the duration of the work and the impossibility of dismantling.

I myself once tried to glue it on liquid nails (2 years - the flight is normal, but there is an opinion that the ammonia contained in this glue destroys the amalgam - I haven’t noticed it yet, but I don’t do it anymore - just in case.

Choose the method that you like best and go ahead!

There are currently four known methods for attaching mirrors.

The first option is that it is quite easy to attach the mirror to the door if you use tape. But not simple, but double-sided. Yes, it’s simple, but the option is not at all reliable. Tested, as they say, by personal experience. And I don’t recommend it to you.

The second method is better, but more difficult - you will need to use metal or plastic stops. These stops resemble paws. They are attached to the door, and then the mirror is “inserted” into the claws. I can say that these paws are visible from a certain angle, but purely externally, aesthetically, they do not spoil the picture. I recommend this option.

A method using silicone is also common. The mirror will hold up perfectly - just not large, that is, not too heavy. If the mirror is massive and of good quality, then over time the fastening will lose its reliability and the mirror will begin to slide.

A super reliable option is to use screws.

If you want a simple and quick option, I recommend combining silicone and tape.

We do it this way:

first remove the cabinet door from its hinges;
wipe the mirror from the back side, degrease the surface. Then we make a “snake” of silicone in the center of the mirror, and distribute tape along the edges. I just recommend using tape of decent thickness, well, at least 0.5 millimeters. To make it easier, I advise you to make marks for the mirror on the doors. This will save you time when gluing and the mirror will be placed accurately. Glue and let the silicone dry well. The door can be returned to its place.

Mirrors are relatively light in weight, and if you also take into account the fact that the cabinet doors will open and close, I would not risk attaching the mirror with adhesives or double-sided tape. Moreover, this type of fastening can damage the back side of the mirror (amalgam).

One of the reliable methods of fastening is metal decorative pendants.

A mirror can be turned into an exquisite element of the interior; it can diversify the decor, decorate a room, and give the room a solemn look if placed in a beautiful decorative frame. There is huge scope for imagination here.

You can make a frame for a mirror yourself or purchase, for example, a picture frame from a store, depending on the style of the cabinet or room.

To securely fasten the frame from the back, screw 4 metal hangers so that they are not visible due to the contours of the frame.

I understand from the question that the mirror was purchased without mounts.

If they are not there, usually the fasteners are sold with decorative plugs that do not spoil the appearance, then I advise you to just glue them.

Double-sided tape is not reliable. The cabinet door opens constantly and if the mirror is heavy, then it won’t last long on the tape.

How to repair a crack in window glass

It is quite possible to remove a crack in a window glass, although you will have to work hard.

Preparatory stage

Before you get started, you need to prepare the surface for the procedure. To do this, you will need to wash the glass on both sides. You must wear rubber gloves to carry out the procedure; you can use any product intended for cleaning windows.

After all dirt and accumulated dust have been removed from the surface of the glass, it is necessary to wipe it dry with a lint-free cloth. The glass must be completely dry, otherwise the result after sealing the crack will quickly disappear.

Degreasing

After you are sure that the glass is clean and dry, it must be thoroughly degreased. Professionals recommend using available materials, such as acetone or gasoline.

It is important to pay attention to ensure that after the degreasing stage there is no lint left from the napkins on the glass.

Repairing a crack

You can seal a crack in the window glass using silicone glue purchased in a store, or you can prepare a repair composition yourself.

Repairing a crack with silicone glue

This product is indispensable when working with glass. On sale you can find tubes with a wide or narrow neck. If you purchased the first option, then it is more convenient to work with the material by taking a sufficient amount of glue into an ordinary medical syringe; If you bought glue of the second option, then you won’t have to do any additional manipulations.

After such work, the glass can be subjected to water procedures.

Let's make our own glue

If you don’t have silicone glue at home, you can prepare the adhesive base yourself. To do this you need:

Then proceed in the same way as when using silicone glue. The result will please even a professional!

other methods

If you have a barely noticeable crack on the window, then it would be wise to do without lengthy procedures to repair the chip. You can use regular transparent nail polish; in some cases, classic stationery glue will do.

If you doubt your skill, using tape will do. You need to seal the crack with transparent tape on both sides. But you need to be prepared for the fact that the tape on the window will be noticeable, and such repairs will not last too long. Therefore, the tape will need to be changed from time to time. The fact is that condensation will form, so the tape will simply peel off.

How to remove and insert into kitchen cabinet door?

Most often in kitchen cabinets it is secured using plastic L-shaped fasteners and self-tapping screws. It is easy to replace such glass sheet.

If you are afraid that the glass holders may not support the weight, place them larger at a shorter distance.

When using new glass holders, pierce them with an awl to make tightening the screws easier.

Mounting to plastic holders is the simplest, but least aesthetically pleasing way.