12 ways to update your kitchen set

The kitchen set is subjected to heavy loads, so sooner or later the time comes when it loses its attractiveness. But this does not mean that strong cabinets that will last for many years will have to be thrown away and replaced with new ones. There is another way out: restoring kitchen furniture will help restore them to a decent appearance and save money. Let's consider methods of such repairs available at home.

Self-adhesive film

This method of restoring a kitchen set has become truly popular, and all thanks to its many advantages :

vinyl film is inexpensive, so updating facades will not break your pocket;
The range of self-adhesive films is huge; you can find options that imitate any type of wood, stone or leather. There are films depicting landscapes, with interesting designs, etc., with a smooth and embossed surface;
Almost everyone can handle installing the film - just be careful during the measurement process and directly during gluing;
vinyl film is not afraid of temperature changes and moisture, which is very important for the kitchen. It will be easy to care for such a surface;
if any part is damaged, or you again want to change the situation, the film can be easily removed.

The downside is the low durability of the film, only 3-4 years, but the low cost and ease of replacement smooth out this drawback.

The procedure for gluing kitchen facades is quite simple. The main thing is to follow the following recommendations:

choose a film of a suitable color, taking into account your preferences for the new kitchen interior. It is not necessary to take a material with imitation wood - you can take a plain, light-colored film, and then you will be able to make a small kitchen larger and make your dreams of creating a minimalist interior come true;
It is best to remove the kitchen facades - this will make the work easier. The fittings must be dismantled in any case;
measure the parameters of each removed facade;
the film must be glued to a clean, dry surface, i.e. facades must be thoroughly cleaned of stains of grease and dirt. This can be done with a soap solution or using dishwashing detergent. After this, you need to remove the remaining detergents and wipe the facades dry;
If the facades are seriously damaged, you will have to spend some time on repairs. The peeling edges at the ends must be glued. The holes must be sanded, then filled with acrylic putty, sanded again and primed. If there are large potholes, then it is better to glue a patch of plywood or veneer in their place;
In accordance with the measurements taken, the film must be cut. Experienced craftsmen recommend adding 4-5 cm of allowance in places where the film will bend. If there is a large design on the film, then when cutting it is necessary to control that it is positioned correctly. It is better to cut with a stationery knife - this way the edge will be as smooth and neat as possible;
Take the first piece of film, start removing the protective layer of paper and apply the film with the adhesive side to the facade. Controlling the evenness, gradually peel off the protective layer and stick the film;
You can roll the film with a rubber roller or a plastic scraper. This removes any remaining air. It is necessary to smooth out from the center to the edges. If there are any air bubbles left, you can pierce them with a needle and roll the surface again with a roller;
If suddenly you notice that somewhere the film is glued crookedly, then within 5-6 hours the situation can be corrected. The film can be re-glued, but not more than 1-2 times, since then the glue will simply lose its properties;
when all the facades are pasted over, you can screw them back on;
You can use old fittings, or you can replace them with new ones, which fit better into the updated style.

If the shelves are dirty to such an extent that no detergent can remove them, then they can also be covered with film. The operating principle is still the same. The film can be chosen to be close to the original color of the shelves.

Painting

Radically changing the color of the facade is a simple and quick way to restore both furniture and the interior as a whole. This method can be used in different ways:

Choose one color for both lower and upper cabinets.
Make the top one shade and the bottom another.
Add several colored patterns that will be repeated not only on furniture, but also on walls or textiles. Such patterns are made using stencils.

For restoration using painting, durable paints are chosen that can withstand heat, high humidity and do not wear off. Automotive or chalk paint would be a great option.

Do the work in this order:

The facades are being removed.
Cleans from dust, stains and grease deposits. The latter is given more attention.
Allow the base to dry.
Parts of kitchen furniture for restoration need to be sanded, especially if there is a varnish coating.
Apply 2 layers of primer, allowing each to dry.
Sand again to get a smooth base.
Apply paint and let dry.
After restoration, the fittings and facades are installed in place.

This is what they do if everything is painted completely. But when making small patterns in individual areas, it is not necessary to remove the façade, you just need to clean it well and degrease it.

Replacement of facades

Many people think that facades covered with film look somehow too modest. This is all, of course, a matter of taste and personal preference, but it is difficult to radically change the kitchen using vinyl film, because glass inserts or panels will not be added to the doors. To make serious changes to the kitchen interior, it is better to act radically and completely replace the facades. Yes, it will be more expensive than with film, but still much cheaper than buying a new headset. This method is perfect if the furniture frame is still quite strong and durable.

It will be easiest for owners of modular furniture that was purchased relatively recently. Then you can buy facades of the required size and replace them yourself. But you’re not so lucky often, so you usually have to make custom-made facades. It is not at all necessary to change wooden doors to wooden ones, and chipboard to chipboard. The uniqueness of this restoration method lies precisely in the fact that the appearance of the set can be dramatically changed using completely different materials.

The cheapest option is facades made of chipboard or plastic. MDF and wood will cost more. You can choose fittings and decorations, for example, use glass inserts, but all this will be reflected in the price. Handy craftsmen, of course, can make all the facades themselves. If you have woodworking skills, then why not? But it’s much easier and faster to contact a specialized company that will produce facades for your set.

Repair of kitchen facades in Moscow

We recommend to residents of Moscow and the region, which has been operating for more than 20 years and specializes in the repair of kitchen facades. Experienced specialists can replace facades or repair existing ones by painting, enamel coating or gluing film. The company's services also include hardware repair and countertop replacement. All work is carried out on site, preliminary measurements are taken, the design and estimate are agreed upon, and the required fittings are manufactured from the desired material. All work is guaranteed. You can view detailed information and examples of work on the page https://remont-kuhni.com/service/remont-kuhonnyh-fasadov/.

An example of the work of specialists

DIY kitchen renovation ideas

How to breathe new life into old kitchen furniture? There are quite a few ways:

Decorating with stickers will help hide minor scratches and chips.
Covering with film will hide more serious damage.
Painting gives a completely different look to the facades of kitchen units.
Applying varnish is usually used to restore and protect furniture made from natural wood.
Decoupage is the application of appliqués or raised patterns.
The use of moldings and decorative overlays made of wood or plastic.

Decorative stickers

Facades covered with film

Kitchen updated with varnish

Painted MDF facades

Decoupage

Decorative furniture overlays
To achieve a better result, these methods are combined. Let's take a closer look at restoration methods and features of restoration of different types of facades.

Coloring

The method is quite simple, but requires careful surface preparation. The main advantage of this method is the ability to paint the facade in any color. If you want to make your kitchen bolder, you can choose a bright shade, such as blue, green or orange. A win-win color is white, as well as many light shades, incl. beige, gray, cream, etc. Imagine in advance what the kitchen will look like and get creative.

At the same time as painting the facades, they can be slightly transformed using moldings , special strips that are glued to the surface and give it an interesting relief.

The sequence of actions is as follows:

remove the facades from the furniture, dismantle the fittings and glass. Those elements that are difficult to remove can be sealed with masking tape;
It is most convenient to remove old varnish or paint using a sanding machine. If PVC film was used as decoration, it is better to use a hair dryer. The temperature will melt the film and make it easier to remove. It is better to work in a respirator so that small particles of the facade and the pungent odor of PVC do not enter the respiratory tract;
if there is serious damage, they must be filled with putty and then sanded;
the surface is rubbed with sandpaper, then the dust is removed and degreasing is carried out;
if you plan to use moldings, then they are attached at this stage. You can choose smooth or textured planks; there are products that imitate stucco. It is better to sand the planks in advance, then they are cut into pieces of the required sizes. Often moldings are attached along the contour of the doors, or they are formed into a pattern closer to the center. Usually a connection at an angle of 45 degrees is used. After you are sure that the figure is laid out evenly, the elements are glued, you can use glue for wooden products. It is allowed to use nails without heads;
MDF, chipboard and wood absorb moisture well, so it is better to pre-coat them with a primer. The one designed for woodwork will do. It is better to apply two layers;
Now you can start painting. It is better to use acrylic paint or auto enamel. The first is cheaper, the second is better in terms of moisture resistance and resistance to mechanical damage. You can use a brush, roller or spray gun. The paint is applied in 2-3 layers depending on the required color saturation. To guarantee, some craftsmen cover the facades with a layer of transparent varnish;
when the paint has dried, the masking tape is removed, the fittings are returned to their place, and the facades themselves are hung on hinges.

If painting seems too banal to you, then use glisal , a translucent glossy paint. It is applied in exactly the same way as acrylic paint, but while the coating dries, you can create an interesting texture on the surface. Using a sponge, bag or other available items, you can make a geometric design or an ornate pattern. If anything happens, part of the drawing can be removed with a roller. The result is an unusual result that will appeal to lovers of ethno-style.

The nuances of working with natural wood

Furniture made from real solid wood is a classic option that does not lose its attractiveness and practicality over the years. Wood is a very durable, environmentally resistant, environmentally friendly material that has a presentable appearance and a long service life.

When renovating kitchens made of natural wood, you must adhere to a few simple but effective rules:

Having discovered scratches or small cracks on the wood, we immediately restore the surface using furniture wax. Otherwise, there is a risk that the tree will begin to dry out in the damaged area;
if you need to eliminate a chip, wood putty will help. Apply it layer by layer until the surface is level. After complete drying, sand the defect area and coat with varnish;
restoration of a damaged varnish layer - this often happens in places where the wood has been subjected to severe mechanical damage. Simply fill the deformed area with a layer of clear varnish and let dry.

Natural wood is an expensive material, working with which requires special knowledge and skills. In order to be sure of the correct approach to repairs, it is better to turn to professionals.

The main condition for extending the life of wood furniture and maintaining its visual appeal is proper care of the products:

Do not use abrasives or solvents. To clean the surface, use only soft cloths soaked in a mild soap solution;
Do not allow hot steam or moisture to accumulate in the kitchen. The optimal humidity percentage for natural wood is no higher than 70 percent;
do not place hot dishes on the surface of solid wood furniture;
regularly carry out minor repairs to furniture - rub out scratches, coat the wood with mastic, check fastening joints.

By restoring kitchen furniture with your own hands, you will not only save your family budget, but will also be able to realize your artistic ideas and ambitions. Original decor, choice of colors, and your own design will turn the work not into a banal furniture repair, but into a real creative process.

Varnish coating

This option is only suitable for facades made of solid wood . Varnish allows you to reliably protect the wood and at the same time does not hide its chic natural appearance. When it comes to furniture, nitrocellulose, alkyd-urea, polyurethane, epoxy and polyester varnishes are used. It is important that the varnish protects the wood from moisture and elevated temperatures. The varnishes have a not very pleasant smell, so it is better to carry out all work outside. If this is not possible, then it is better to take a water-based material, it has almost no odor.

It is very important to decide in advance on the degree of gloss . The varnish can be glossy, which will add visual volume to the set, or it can be matte, which will emphasize the wood pattern. The degree of gloss is indicated on the packaging as a percentage of reflected light: glossy varnish will reflect up to 90% of light, matte - only 10%, there are many intermediate options. Which is better depends only on your preferences.

The operating procedure is as follows:

remove the facades, dismantle the fittings, if necessary, seal some parts with masking tape;
remove the old layer of varnish; you can use sandpaper. Dust is best removed with a vacuum cleaner. After finishing the work, wipe the surface with a damp cloth, then allow it to dry thoroughly;
apply primer varnish;
The varnish is applied using a brush or roller; it is better that each new layer is slightly thinner than the previous one;
Some types of varnish need to be worked only outdoors;
drying speed varies for different varnishes, the average is indicated on the packaging;
After drying, the tape is removed and the fittings are returned to their place.

To create an aging effect , you can apply stain in several layers.

Restoration of the ends of chipboard furniture

The front surface of sets made of this material is restored using the methods described above. Other damage typical of furniture of this type, such as chips at the ends, can be repaired using melamine edges.

In the store we select a new edge according to color and thickness. We measure the length of the required segment in advance and buy material with a small margin.
We remove the old edging. To do this, heat the end with an iron.
Using a chisel we remove the unevenness of the end, and then sand it with fine sandpaper.
We put the new edge in place and smooth it with an iron. After the glue has hardened, we trim off the excess with a sharp knife and sand the joints.

USEFUL INFORMATION: Penalty for connecting a gas stove yourself

Updating hardware

We have all repeatedly heard about the enormous influence of little things, but many, however, refuse to believe the truth of this statement. Designers, without any doubt, convince us that sometimes changing the handles on a kitchen set can transform the kitchen space. More often, however, replacement of fittings is carried out along with updating or replacing facades.

It happens that the kitchen set itself is perfectly preserved, but the handles from constant interaction with them have become peeling, tarnished, or even deformed in places. Remove the old fittings and head to a specialty store, where they offer a wide variety of handles to choose from. The main thing is that the size matches and you don’t have to drill new holes.

If the old handles fit perfectly into the style of the kitchen, then you can find new ones that are as similar to them as possible. If you want something fresh, or if the kitchen façade has become completely unrecognizable after some simple manipulations, then choose handles in a new style. The range of manufacturers includes handles in modern and classic styles, smooth chrome-plated and antique carved. There are handles with imitation leaves and animals, and some with inlaid glass and stones. There are wooden, plastic and metal, transparent and colored - everyone can choose the right one.

Perhaps the hinges and mechanisms of the sliding shelves need to be replaced . Before going to the store, these elements should be dismantled and taken with you as a sample. New loops are selected to match the size of the previous ones. It happens that the existing holes become very loose, and it is impossible to attach new hinges to them. Then they will have to be puttied with an acrylic-based compound in the color of the facade, sanded, varnished or painted, and only then new holes will be drilled and purchased hinges installed. Old roller mechanisms can be replaced with ball ones. All these actions give a huge result - using the headset becomes more pleasant and comfortable.

Chairs

Repair of kitchen furniture includes restoration of chairs. Most often, their seat wears out, which requires replacement of the upholstery and filling. A cover will help hide imperfections in the appearance of the chairs. But he is not able to correct the inconvenience of the seat if it has become deformed during use. Repair of chairs is carried out in several stages:

Remove old upholstery.
Take out the filler.
Clean the wooden slats and sand them with sandpaper, removing the varnish. Chair legs can also be sanded.
The wooden elements are coated with varnish.
Place the filler.
The seat is upholstered with durable fabric.

Glass replacement

As a rule, it is enough to simply wash glass inserts in facades well to return them to their original ideal appearance. But what if you want something new? You can replace the existing transparent glasses with frosted or colored ones, then the kitchen will noticeably change. True, the glass will have to be made to order, and not everyone can handle the replacement itself.

A more budget-friendly option is to buy self-adhesive film. With its help, you can give the glass the desired shade without depriving them of transparency. It will help create a matte effect or imitate a real stained glass window. Anyone who knows how to use a tape measure or measuring tape, scissors and is able to carefully apply the film can definitely cope with gluing the film.

There is also an old, ancient method that involves applying a mixture of chalk powder and silicate glue to the glass. This material is applied to the glass in two layers, after which they become matte.

Door repair

A common defect in cabinet furniture is poor functioning of cabinet doors and bedside tables: they warp, do not want to close, and open spontaneously. The reasons are different: incorrect adjustment, defective hinges or magnetic latch, misalignment of the entire structure, swelling or delamination of the material.

Note: changes in the geometry of cabinets are often associated with the unsatisfactory condition of the back wall. The fiberboard sheet nailed there plays the role of a kind of retainer. If necessary, it is changed by cutting out the required fragment to size and attaching it with nails or small screws.

If the problem is in the loop, then replacing it is not always necessary: in most cases, adjustment helps. For this purpose, the design of the device has two screws: one is responsible for the fit of the door to the body, the second regulates its position in the frontal plane, moving it to the right or left.

A loop that has been torn out with meat can be put back in place using screws of a larger diameter. Another option is to drill holes, place wooden dowels in them using wood glue, and then screw fastening screws into them.

If the hinge breaks, it is replaced. Installation in old sockets is simple: mounting screws are screwed into the existing holes. It is more difficult if the hinge is installed in a new place or the door is changed. Assembly occurs in the following order:

Sockets with a diameter of 35 mm for disc hinges are marked and cut with a milling cutter.
A hinge plate is inserted into the slot located in the door perpendicular to the end and secured with a pair of self-tapping screws.
The second plate is placed in the body, secured with screws through special holes in the bosses.
Screw in the two adjusting screws to achieve the desired door position.

Details of adjusting the hinges are shown in the video.

Spontaneous opening of doors occurs when the magnetic strip is faulty. In some cases, it helps to clean the magnet and the iron plate it attracts from contamination, adjusting their relative position strictly opposite each other. If these measures do not help, then the element is changed.

And one more video: a little trick that will solve the problem of adjusting a cabinet with worn out hinges without replacing them.

Decoupage of kitchen facades

Decoupage is a great way to update your kitchen set and give it a touch of Provence style. After the transformation, the facades will look as if talented artists painted them for you, but you will know that you made all this beauty with your own hands. You can put absolutely any design on cabinets and shelves, but usually they choose something related to plant and kitchen themes: images of fruits and vegetables, coffee, jars of spices and cereals, flowers, etc. Decoupage will help decorate facades with ornaments in the style of Gzhel or Petrikov painting. The main thing is to find a suitable drawing - no one limits your imagination.

Everyone can cope with the restoration of facades on their own:

remove all doors, remove fittings;
If the surface of the headset is perfectly flat and smooth, then you only need to wash it well to get rid of stains of grease and dirt. If there are defects, it is better to sand the surface. First use fine-grained sandpaper, and then coarse-grained sandpaper. If you have a sanding machine at your disposal, it will greatly simplify the process. If there are cracks, depressions, or pits, it is better to fill them with putty. When it dries, the treated areas are sanded again. After this, the facades can be primed, but many skip this stage;
The decoupage technique is suitable not only for wood, chipboard and MDF - it can also be used to decorate plastic and glass facades. Preparing them for decoration is very simple - just get rid of all the dirt and grease;
The easiest way is to use three-layer napkins for decoupage. Think in advance about which part of the façade the drawing will be located. Don't use images that are too small. Different cabinets can be decorated with pictures in the same style. The image can be glued to regular PVA glue;
Now all that remains is to open the facade with acrylic varnish, it is better to use 3-4 layers, each applied after the previous one has completely dried. The easiest way to work is with a narrow brush with long bristles;
All that remains is to return the fittings and install the facades.

If this is not your first work using the decoupage technique, then you can use not only special napkins. Experienced craftsmen know that fragments of wallpaper with a suitable pattern, and even maple for a kitchen table, will do, not to mention that the image you like can be printed on a printer.

Restoration of a burnt tabletop

Burnt countertops can be restored to their original appearance in the following way:

Using a router, carefully select the damaged area. It is necessary to go deeper into the surface with ledges, reducing the area and slightly capturing intact material around the perimeter. The result is a recess that looks like a miniature quarry.
Fill the hole with softened wood putty. It dries quickly, so we compact it into the recess in small portions.
We cut off the protruding excess with a sharp knife, carefully sand the patch, and then polish it.
We paint the restored area. In this case, you need to try to reproduce the color and texture of the main part of the countertop.

By combining these methods, you can restore kitchen furniture without large financial investments. This will not only restore the appearance of the old kitchen set, but also make it unique.

And finally, the promised selection of photos of kitchens before and after restoration.

Decoration with ceramic tiles

After renovation, almost everyone has leftover tiles. You don’t need a lot of material for this method, so even buying new tiles won’t break your budget. Naturally, not all facades are tiled. A fragment with a beautiful pattern can be glued in the center. This can be one tile or four smaller tiles laid out in a square or diamond shape. You can lay out the contours of the cabinets with small tiles. Often such decoration is used to decorate the lower or upper edge of the set. The image on the tiles should match the overall style of the kitchen.

The operating principle is as follows:

It is better to remove the facades, dismantle the fittings;
At a minimum, the surface must be washed and degreased with an alcohol-containing composition. If desired, the facade can be painted, following the tips described above;
Place the tiles on the surface in advance, determine the ideal place for them, it is better to carefully trace them with a pencil;
Prepare tile adhesive, apply it to the facade and start gluing the tiles. The principle is almost no different from the usual installation of tiles, only the glue will be needed so that it can hold the tiles on a wooden (or other) facade;
when everything is dry, you can frame the tiles with molding to make the decor look complete.

Change handles

The fittings seem like a small thing, but very important. New modern handles will give the old set a much more modern look.

In the interior of one kitchen, you can apply several renovation options at once. For example: remove half of the upper cabinets by hanging shelves; remove half of the lower facades, replacing them with curtains; Paint the remaining doors, bottom and top.

Decoration with rattan inserts

The principle is the same as with ceramic tiles. Rattan inserts will look appropriate with ethno- and eco-style. Rattan copes well with moisture, which is why it is well suited for the kitchen. It can be used to replace glass inserts along with large-scale restoration of facades. Rattan inserts can be glued on top of blind cabinets. The variety of weaves and the presence of several shades will allow you to choose the appropriate insert option.

Working with rattan is easy:

a fragment of the desired shape and size is cut out; you can use pruning shears or metal scissors;
the segment can be attached to the facade with a stapler;
Wooden planks pre-treated with an antiseptic are installed around the perimeter of the insert. You can use glue;
The main thing with rattan is not to overdo it - small inserts on the largest cabinets will be enough to add the necessary notes to the interior.

Veneering/veneering

Veneering is one of the ways to restore interior items. By covering the tabletop with veneer, you will transform it beyond recognition and give it a rich look. Thanks to the huge number of colors and textures, it is possible to choose the material that will fit perfectly into the overall interior.

There are three veneering methods:

Hot. The material is glued to the base with glue.
Cold. The material is pressed using special equipment.
Membrane. Used in industrial environments and suitable for difficult surfaces.

At home, you can only use the first method. It is implemented in several steps:

Removing old coating, fittings, eliminating damage using putty. After filling the cracks, the putty is leveled with sandpaper until a completely flat surface is obtained.
Veneer preparation - unwinding the roll, moistening with a sponge. In order for the material to become straight, it must be laid wet between the boards and left to dry.

Glue is applied to the prepared surface, then the veneer is glued. The top is ironed through paper.

Use of chintz

Fabric decor is rarely used, so this is your chance to make your kitchen unique. You will need a piece of fabric with a suitable pattern, and then everything is simple:

the beginning, as always, is to dismantle the facades and fittings;
cabinets are measured, fabric is cut out and glued to pre-washed and degreased facades;
facades are covered with colorless varnish in 5-7 layers, it will protect the fabric from moisture, grease and odors;
All that remains is to return the fittings to their place, and you can purchase new, more suitable handles;
An interesting effect can be achieved if you make a lampshade for a lamp from the same fabric, or sew covers for chairs.

Further care

Kitchen sets are often made from high-quality and durable materials. But if you don’t take proper care of your furniture, even the highest quality material will not last long.

Care measures:

You should monitor the humidity of the working surfaces on the headset. The material and special impregnations protect against moisture, but they will not cope with excess humidity.
Try not to leave scratches on the surface of the headset. This means not cutting on the table without a board, and not placing dishes and household appliances with sharp legs on the countertops.
Place hot objects and products on special stands.

What else is used to update kitchen facades?

The imagination of home craftsmen knows no bounds, and people's ingenuity has generated a lot of interesting, non-trivial ideas on how else to refine an old kitchen facade. The following materials are used for this:

vinyl stickers, the range of which amazes even experienced designers. Plain, boring facades can be decorated with animal figures, world landmarks or inspiring phrases. It is very easy to glue and remove this decor;
sea pebbles and mosaics are glued like ceramic tiles and allow you to create interesting decorative effects;
wooden decor. There are ready-made kits for children's creativity, but if you have the skill, you can cut wooden figures yourself. All that remains is to open them with varnish and glue them to the facades. This decor looks best on wooden facades.

Chair repair

Damaged coverings of old kitchen chairs can be restored using the above methods. The exception is furniture with soft seats: re-upholstering them without skill is quite problematic, although possible. But there is a simple option: make a cover. In this case, reupholstery will not be required, and the appearance problem will be solved.

Loose parts are strengthened using wood glue. In exceptional cases, self-tapping screws are used with mandatory drilling of holes for them. Painting and decoupage transform an old, unsightly chair into an original and beautiful piece of furniture.

You should not throw away old kitchen furniture that has lost its outer luster. With a little imagination, you can give it a completely new appearance, adding originality to the interior of your home.

Decorate the interior

Decorative little things turn the kitchen into a cute, cozy nest. Minimalism is good in an expensive interpretation, but the old interior needs to be properly decorated - new design elements will draw a significant part of the attention from old surfaces and shabby objects.

There will be wall decorations that hide old decoration (paintings, posters, mirrors), baskets and storage boxes, and living plants (visually refreshing the decor). However, don't overdo it! Don't let the decor clutter your kitchen.

Decorate the wall near the dining table

A stylish and comfortable dining area can become the main decoration of the kitchen interior. It will attract attention, making the shortcomings of the old kitchen much less noticeable. Fortunately, it is much easier to transform a dining area than a work area.

Particular attention should be paid to the wall near which the table is located. If the decoration in the kitchen is very old and there is no way to change it, you definitely need to refresh at least this wall. It is not at all necessary to remove the old coating and thoroughly prepare the surface. Even on top of old wallpaper, tiles or paint, you can install, for example, lining, panels, laminate, mirror or glass panels, etc.

Cover the apron with new material

If the wall in the work area has a more than deplorable appearance, you can hide it behind laminated chipboard, MDF panels, plywood sheets, a mirror, clapboard, etc. In this case, it is not necessary to remove the old apron finish.