Types of Hettich Quadro guides, nuances of choice
The size range of Hettich guides allows you to install drawers in a base with a depth of 260mm with a subsequent pitch of +50mm as with all standard guide sizes. The design of the mechanism itself is such that the running parts are automatically cleaned during the extension process, so no additional maintenance is required. Also, the quality of the galvanized steel of the Quadro guides allows them to be installed on furniture in rooms with high humidity.
The range of Hettich QUADRO guides is presented in two main series with different functionality:
- QUADRO 25/30 series – partial extension guides.
- QUADRO V6 series – full extension guides with a load-bearing capacity of up to 30 kg.
- QUADRO V6+ series – full extension guides with a load-bearing capacity of up to 50 kg.
Optionally, the series is equipped with an expanded ability to adjust in three planes (Hettich QUADRO 4D) - lateral, height and tilt. This quality is especially valuable when installing built-in furniture, where there may be minor differences in the accuracy of the installation relative to the geometry. In any case, it is possible to adjust the drawers so that they slide smoothly when rolling out and do not warp, while the facade itself looks smooth and without cracks.
Each of the Hettich QUADRO V6 and 23/30 series has two possible configuration options:
- Quadro Stop Control – silent pulling (self-closing) without self-opening, the option is built in by default.
- Quadro Silent System – built-in closer for smooth closing.
- Quadro Push to open – built-in push-to-open mechanism.
All options are interchangeable. That is, initially, for example, you can install guides with Quadro V6 Push to open, and then change them to guides with a Quadro V6 Silent System closer. There is no need to recalculate the parts of the drawer frame itself.
ABOUT
Domfort specializes in the sale of furniture components. We have been working in the market of Kirov and the Kirov region since 1997 and during this time we have passed a successful path from a beginner to a recognized leader.
Domfort began its activities by selling components for upholstered furniture. To date, our company has created proposals that will satisfy the most demanding manufacturer of both cabinet and upholstered furniture.
The advantages and convenience of cooperation with us were appreciated by many well-known furniture manufacturers, suppliers of furniture components and accessories, both in the Kirov region and beyond.
Our partners are the best manufacturers of fittings and furniture components. We fully guarantee the quality of the products supplied. Regardless of the distance of the supplier, supply logistics are well thought out and maximally protected from force majeure situations. But we do not stop there and are constantly improving business processes.
Hettich Quadro
The manufacturer offers two options for calculating the parts of a drawer, with a skid bottom and flush. But the easiest way is to calculate Hettich QUADRO drawers with a chipboard bottom recessed for installation of guides.
At the same time, the expanded 4D adjustment capabilities allow the use of uniform design diagrams for installation/replacement for any bottom-mounted guides from other manufacturers.
It is also possible to replace the partial extension guides with a full extension with the Hettich quadro push to open or Hettich quadro v6 silent system options selected.
The general scheme for calculating the parts of a drawer for installing any Hettich Quadro guides is as follows:
- The length of the side of the drawer = the length of the guide (250, 300, 350, etc.), the height is approximately (-50mm) from the height of the facade.
- The front panel of the drawer is 12mm shorter in height than the side panel; its length is calculated using the formula (internal niche size) -20x2.
- The bottom is inset, recessed along the height of the front panel.
Calculation example:
The length of the drawer guides is selected according to the depth of the niche for embedding. The difference should be from (+13mm) for the overlay facade and from (+35) for the internal one.
For example, for a cabinet with two drawers with HxWxD 300x600x450, guides with a length of 400 mm are suitable.
We get the calculation of parts for the drawer:
- Sidewall of drawers 400x220 – 2 pcs.
- Front/rear panel (600-32-20x2)x(220-12)=528x208 – 2 pcs.
- Bottom 368x528 – 1 piece.
info-cast.ru
File for calculating parts for drawers from Hettich.
Calculation of chipboard drawer parts for Quadro flush-mounted slides.
Calculation of drawer parts with double steel sides ArciTech
To calculate drawers for Quadro flush-mounted guides, the file contains 2 tables, the first table is called “input data” where you enter the initial parameters, that is, the width of the internal opening of the cabinet in which the drawer will be installed, the drawer height we need, select the desired one from the drop-down list the length of the guide, the thickness of the bottom, it can be made of either chipboard or fiberboard, it can be inserted into the groove or not and recessed relative to the sidewall to a depth of 12 or 13 mm. You can also set the cutting depth, for example under fiberboard.
In Table No. 2 (Calculation data) you automatically receive the overall dimensions of the drawer parts, please note, these are the overall dimensions, that is, with the edges already glued.
The width and depth of the bottom, the length and height of the side, the length and height of the cross.
The guides come in partial extension with a self-closing function, with a built-in damper, that is, smooth finishing, and with a Push To Open mechanism, that is, opening by pressing. Load capacity 25 kg including box weight.
And QuadroV6 full extension guides with the same functions, they come with the V6 attachment and with a load capacity of 30 kg. Guide with V6+ attachment, load capacity 50 kg.
The locks or latches are the same for all types of guides.
There are also pictures with the mounting dimensions of the holes for installing the guides and installing the drawer in the cabinet.
Switch to the ArciTech sheet, here you can calculate the dimensions of the parts for the ArciTech drawers, with double steel sides.
The principle is the same as for drawers for concealed mounting guides: enter the internal width of the cabinet opening in which you want to install the drawer, select the length of the guide from the drop-down list, and select the desired height of the drawer from the drop-down list.
The “calculation data” plate automatically calculated the width and depth of the bottom, the height and width of the back wall, here we mean the back wall made of chipboard. And if you have an inner drawer, the “inner drawer panel” cell will contain the length of the aluminum inner drawer panel.
There are 2 types of guides for 16 and 18 mm cases, therefore there are two tables for calculation.
You can see how the file works in more detail in the video.
DIY installation of drawers with Hettich Quadro guides
Installation of Hettich Quadro guides is carried out in strict accordance with the manufacturer's instructions according to the marking scheme.
Please note that fastening the guides must be done with a distance of 1.5 mm from the edge, and then in accordance with system 32 for chipboard, 37 mm for the first mounting hole and a pitch of 32 mm.
If you need to install Hettich Quadro with push-to-open (push to open series), then the gap between the inside of the facade and the body increases to 4 mm.
It is needed to activate the pusher. But if the side of the cabinet is visible, the appearance of the furniture may suffer. Therefore, it makes sense to take this into account and change the design by adding an overlay panel.
After screwing the guides to the inner sides of the niche and the drawer frame, the last step remains - inserting the drawer itself inside the cabinet. This can be done in two ways: push-on and slide-on (with locking locks).
The drawer is inserted at an angle from above on fully extended runners. Two holes in the back of the drawer raise hooks on the rear runners. Pressing down on the drawer engages the locating pins (trunnions) and they will easily slide into position and provide a precise and secure fit. Removing the drawer is just as easy. You need to pull it out completely, lift it slightly and then remove it from the runners.
Built-in height adjustment ensures perfect front panel adjustment - no tools required. Simple sliding assembly: the drawer sits on the skids and slides easily into place. The lock latch automatically secures the drawer onto the Hettich Quadro guides. Removing the drawer from the slides is just as easy, you just need to pull it out, feel the locks and release the stopper.
Basic operating principles
Since its founding, our company has professed the principles of a civilized market, so we are completely open to the exchange of information, technologies and skills in the furniture components market. The situation in the country and in the world is changing at great speed, many new products and companies are appearing, and consumer requirements and preferences are changing. Therefore, it is of no small importance not only to increase the level of customer service, to apply an individual approach to each, but also to work together with them.
All Clients of our company - both individuals and large companies - can always count on receiving high-quality products and first-class services.
The main principle of Domfort is caring for the interests of the client, the service provided by the company, the constant availability of all types of products (furniture components, fittings) in the warehouse and short lead times for special orders are the basis of the concept of joint work with consumers.
Valuing the impeccable business reputation of a reliable and stable partner, Domfort has always fulfilled and will continue to fulfill all obligations to its Clients. Despite the scale of the tasks facing our company, we are confident that all the prerequisites for further development exist, and that in the future all current and future clients of our company will be satisfied with the results of cooperation with us.
tabbbbb
- Popular
- New items
Boyard
Handle-button (RC003GP.4) gold
rating
52.00 rub.
Cleaf
Slab TSS Cleaf FA90 Spigato/Spigato 08*2800*2070mm
rating
14887.00r.
Boyard
Handle S0130/32 (RS001GP.3/32) (50) gold
rating
24.90 rub.
Boyard
RC001CP.4 (Handle-button)chrome
rating
119.00 rub.
Boyard
Handle-button RC003CP.4 chrome
rating
52.00 rub.
Boyard
Knob handle RC021AB.5 antique brass
rating
136.00 rub.
Kessebohmer
Lifting mechanism FRIIfold SHORT series F, height H650 - 730 mm.
rating
5500.00r.
Sm'Art
19mm Plate TSS SMART M025 MANHATTAN Central (3050*2070)
rating
21390.00r.
JET
Handle-bracket ELIKA, m.ts.128 mm
rating
160.00 rub.
Cosca
161-6 Interior baguette, “Vienna Woods”, ceiling plinth 60, color “Bleached Oak”/18
rating
1111.00r.
Degon
Swivel wheel on the platform with brake 75mm gray rubber Promotion
rating
175.00 rub.
AFF
Master Bin waste collection container, two-section
rating
1150.00r.
Union-Center
25mm chipboard sanding. moisture-resistant RZ (2440*1830) Soyuz-Tsenr
rating
2126.95 rub.
JET
Furniture handle Frozen, 128 mm, chrome
rating
RUB 395.00
AFF
Master Bin waste collection container, two-section
rating
1150.00r.
000000
rating
0.00r.
000002
rating
0.00r.
JET
Furniture hook 543, matte chrome
rating
365.00 rub.
Indaux
Box under the stove, gray 681760310
rating
8400.00r.
China
Rod holder oval chrome
rating
5.00 rub.
China
Round rod D25mm 1mm
rating
450.00 rub.
JET
Oval clothes rail 202
rating
860.00r.
Russia
Retractable rod 250mm
rating
100.00 rub.
Russia
Beech rod 1100mm (20*30)
rating
60.00 rub.
Gals
Cord with switch 303
rating
133.00 rub.
Degon
Metal dowel for tables
rating
8.50r.
Russia
Dowel beech 8*30
rating
0.45 rub.
Russia
Dowel beech 8*35
rating
0.45 rub.
Russia
Dowel beech 8*30
rating
0.45 rub.
Russia
Con
rating
2.50 rub.
Russia
Intersectional screed 5.0*27 M4
rating
3.20 rub.
Russia
EURO countersunk head screw D7.7 6.3×13 PZ
rating
1.00 rub.
Hettich
100852401 Rastex 15, white (5000)
rating
0.90 rub.
China
Buttons, length 21mm, covered / 900 pcs. unitary enterprise
rating
5.10 rub.
Boyard
RC200BSG.5 (Furniture handle)
rating
46.00 rub.
Russia
Collapsible kitchen support H-100mm with stop, black 3 holes
rating
15.00 rub.
Russia
Hexagon coupler 5*50, ZY
rating
1.70 rub.
Boyard
H305A02 (furniture hinge NEO)+115281 mounting (200)
rating
83.00r.
Boyard
RS812CP.3/96 (Furniture handle)
rating
20.00 rub.
Swiss Krono
19mm MDF 1st. white lam. (2800*2070) Swiss Crono
rating
3441.49 rub.
Boyard
handle - button RC117AB.4 antique brass
rating
152.44 rub.
Boyard
