Dish dryers for kitchen cabinets with a width of 40, 45, 50, 60, 70, 80 cm made of stainless steel and other materials: assembly, installation

Hi all! In the absence of a dryer, you usually have to leave the dishes wet directly on the work surface, laying some kind of towel down. An extremely undesirable procedure, due to which the tabletop will quickly become unusable. But a dish dryer in the lower cabinet can be an excellent solution to this problem.

There are several varieties of such structures. We have already talked about corner dryers. And there I noted that they exist in several types, including built-in ones. But they don’t have to be corner to be installed in a kitchen cabinet.

Yes, you can place a regular tabletop model inside the lower cabinet. But access to it for placing dishes will be extremely inconvenient. Roll-out and retractable systems are much preferable.

Let's discuss the issue of built-in dish dryers, get acquainted with their varieties and talk a little about the nuances of choice.

Requirements for dryers

For washed dishes, it is necessary to provide adequate conditions for removing residual moisture from the surface. Wiped dry plates do not require any special equipment for drying, but the process is time-consuming. If, after washing, you place the accessories on a special lattice shelf, they will dry without outside intervention. The time saved in this way can be spent on activities that are not feasible without human participation.

Drying devices must meet the following conditions:

• Resistant to moisture, eliminating rust or areas of oxidation.
• Sufficient level of air circulation in the compartment with installed grille.
• Most drying accessories are equipped with a bottom tray, the cleanliness of which must be regularly monitored (the tray is usually made removable, and the surface is coated with a special composition to protect against microorganisms).
• Fits harmoniously into the design of the kitchen set.

The structure must be strong enough to withstand possible loads.

How to choose?

Choosing a suitable mat for drying dishes is not difficult, the main thing is to follow some rules:

1. The higher the rib on the front side of the rug, the better. Deep gutters provide good ventilation (air helps glassware dry without drips) and help collect more water.
2. Rubber and silicone substrates are good if dishes are dried on shelves and in drawers of wooden furniture. Products made from any materials, including microfiber or polyvinyl chloride, are suitable for metal surfaces.
3. Before you go shopping, you need to measure the area of ​​the surface on which the drying mat will be laid out in the future.

If it is not possible to take measurements, you can use another unspoken rule: the more dishes, the wider and longer the rug should be.

Dish dryer materials for cabinets

In most cases, the main material is steel. The metal grill is coated with anti-corrosion paint or a layer of special rubber is applied. The coating prevents the appearance of rust, mechanical damage and putrefactive formations.

It is also possible to manufacture from stainless steel grades that do not require additional processing. Stainless steel gratings are more visually attractive, more practical and durable than coated products, but more expensive.

Expert opinion

Bashir Rabadanov

Technologist at the furniture company Woodband

The cheapest material for dish dryers is plastic. Plastic models are completely protected from the harmful effects of moisture, do not rot or rust. The design possibilities are wide, since plastic is easy to shape and color. However, the disadvantages of polymers used to make dryers make this material the least popular among others. Plastic is cheap, low-strength, fades very quickly, and a lot of scratches form on it, in which dirt accumulates.

For certain types of kitchen set design, the use of metal and especially plastic is undesirable. Furniture made in country style will look better with wooden dish drainers. These are not full-fledged built-in modules hidden by the facade, but small external elements installed in open cabinets or on the countertop.

TOP 5 best products with reviews and prices

Among the many positive reviews about mats for drying dishes, there are five most popular models :

Umbra UDRY MINI

The Umbra UDRY MINI dish drying mat is a stylish accessory that simplifies the care of kitchen utensils. The product consists of two parts: a fleecy backing intended for drying dishes and a plastic stand with divisions for plates (this part is autonomous and can be removed if necessary).

The upper part of the drying substrate is microfiber, the bottom is membrane . The average cost is 1200 rubles. Read reviews here and here.

Video review of the rug:

NYHOLID IKEA

The NYHOLID dish drying mat is a European quality product from IKEA. This practical kitchen accessory (made of polyester) protects kitchen surfaces from moisture and simplifies the process of caring for kitchen utensils as much as possible.

The average cost is 200 rubles. Read reviews here and here.

Video review of the rug:

MoulinVilla Home

The MoulinVilla Home drying mat protects not only kitchen surfaces from moisture, but also dishes from damage . Thanks to the ribbed surface, moisture does not linger on the surface. Dense silicone prevents glassware from falling. The stylish design will help fit the rugs into the modern kitchen interior.

The average cost is 330 rubles. Read reviews here.

Ginger cat

The red cat dish drying mat is made of dense microfiber. Can be used as a hotel accessory and as a liner in a dish dryer. Bright colors and original design make it a successful addition to the kitchen interior.

The average cost is 150 rubles. Read reviews here.

UpakGroup

UpakGroup LLC dish drying cloth is made of viscose, which perfectly absorbs moisture and protects table and cabinet surfaces from damage. The variety of patterns will make the drying mat a bright accessory to the kitchen interior. The average cost is 50 rubles. Read reviews here and here.

Since drying mats come into contact with dishes, you should buy them only in stores where the quality of the product can be confirmed with appropriate documents. Rugs made from low quality materials can pose a threat to human health.

Sizes of dish drainers

The dimensions of the dryer primarily affect its capacity. On average, every 100 mm of the lattice base can accommodate 3 plates, and a certain amount must be added to the total value for the depth of a particular type of dish. That is, to place 12 plates in one tier, you will need a compartment with an internal width of 500 mm.

Standard sizes of common models range from 400 to 800 mm in increments of 100 mm. The depth of a conventional plate stand does not exceed 250 mm, which makes it preferable to install it in the top row. Bottom dryers occupy the entire space under the table (500 - 600 mm) and are divided into sections.

A module width of 600 mm is the best option, since the load with such dimensions will not be critical even when using roller guides. For multi-level built-in solutions, it is important to remember that the height between tiers should not be less than 30 cm. This height will leave enough space for storing relatively large dishes on the lower level.

Varieties

If we talk about the design features of built-in products, then we can distinguish 2 main types.

Let's start with the classic or standard solution.

See also

Sofa with a swivel mechanism: principle of transformation, advantages

Built into base cabinets

. These are ordinary straight designs, which are presented in the form of a box. It is built into the base cabinet using guides. Such dryers are equipped with several compartments for various dishes. At the very bottom there is a tray for collecting excess water, which must be removed and washed periodically. Such designs are convenient to use for children and small people. You can install a Tip On pull-out system with a closer so that the dryer rolls out after lightly pressing the façade. That is, it is not necessary to use pens here.

If you have a dishwasher installed, such a dryer will be the optimal solution when placed next door. It is enough to open the dishwasher, pull out the drying compartment, and then, without changing your body position, move the dishes from one container to another.

Really very convenient and practical.

If all the dishes are stored on the top drawers, using the bottom drainers will be inconvenient. You will have to constantly bend and climb. This option is not suitable for older people and people with back problems.

I can say that lower placement has more advantages than disadvantages. Much depends on the overall organization of the kitchen.

There is another type.

[adv1]

Roll-out bottom dryers

. Mainly used on corner cabinets. Due to the difficult access to them, it is quite correct to use a withdrawable system. It optimizes interior space. Basically, these are dryers with a mesh structure, which are attached to the counters or to the facades of the kitchen unit. There are usually no divisions into sectors for different dishes. Basically, it is recommended to use such dryers specifically for storage, and not for placing wet dishes there. This is due to the lack of pallets in most models.

So it is the first option that can rightly be considered a full-fledged and most practical dryer installed in the lower cabinet.

Instructions for installing a dryer in a closet

There are a lot of ways to assemble drying cabinets, and they differ in components, design and installation location. Next, we will consider common types of assembly for each location option.

Upper

The internal dimensions of the hanging cabinet must correspond to the width of the module (600 mm). The lower part (bottom) is missing; its function is performed by the frame of the dish dryer.

Sequencing:

1. Attach the outer frame of the lower shelf, the ceiling panel and the supports of the upper shelf to the pre-prepared side panels. To fix the frame, complete self-tapping screws are used, the top is secured with furniture Euroscrews.
2. Mount the rear part of the crossbar in such a way that the back wall made of fiberboard can be inserted into the groove.
3. All that remains is to fix the metal bars in the seats and hang the finished cabinet on the wall.

I also recommend watching 2 videos with instructions on assembling and installing different types of dryers in a closet.

Angular

Installing the upper corner module into a finished (already hung) cabinet includes the following steps:

• Before proceeding with installation, make markings inside the compartment in accordance with the external dimensions of the shelves.
• Connect the side supports (G) to the square profile with the supplied screws.
• Using the markings, try on each of the assembled shelves. Adjust the depth and check that the doors operate correctly.
• If everything is in order, secure the assembled frame to the base, then place the metal grille into the mounting slots until it clicks.
• Place the pallets in special slots.

The process is quite simple. The main thing is that the internal dimensions of the base box correspond to the dimensions of the shelves.

Lower

Retractable lattice modules are usually installed at the bottom of the kitchen unit. The installation process is as follows:

1. We mount the lower guides at a distance of 2 cm from the front edge of the base frame.
2. We screw on the decorative trims.
3. We attach it to the guide holders of the lattice frame.
4. We place the mesh frame on the holders and secure it with latches, having first turned them with the open part outward.
5. In accordance with the complete fittings, we mark the facade.
6. We fasten the fittings according to the markings.
7. We fix the façade to the dryer frame.

The best models of cabinet dryers

The following models of built-in dryers are popular now:

Expert advice on selection and installation

First you need to choose a place of purchase. In branded furniture stores, the products are usually of higher quality. Some may find it more convenient to order online, but this method deprives the buyer of opportunities available only by directly inspecting the product.

The material from which the grille is made is also important. It determines the service life and the condition in which the dryer will be used most of the time. Stainless steel (stainless steel) has proven itself best. Coated versions are cheaper and often comparable in practicality. Plastic is even cheaper, but you should choose it only if you have a very limited budget.

Before ordering or purchasing, it is important to find out what sizes will be needed in a particular case. If you plan to install it in a ready-made cabinet, measure all the internal dimensions of the compartment for the future dish dryer. If the dimensions are not tied to the finished bedside table, you should start from the actual needs. As a rule, a module with a width of 600 mm will be sufficient - it can accommodate 12 plates, and with the same depth it is possible to divide it into additional compartments within one tier.

The quality of components is another important point. All parts, even those invisible after installation, must be free of obvious defects, damage to the coating, and especially corrosion. Ball retractable guides are better than roller ones, although they are more expensive. But it is not advisable to save on them, since the load on the dryer is relatively large (the dishes weigh a lot), and plastic rollers will not work for long under such conditions.