Sliding wardrobe 3 meters wide internal filling

Proper filling of the wardrobe and distribution of internal compartments guarantees the absence of inconvenience or discomfort during its operation. Depending on the location of the cabinet, the layout of the compartments may vary. So, nets with replaceable shoes in large quantities will become out of place in a closet located in a nursery. And retractable glove boxes are of little use in a closet located in the bedroom.

There are no specific standards and rules for internal filling, the number of shelves, the presence of mezzanines or drawers. The design of the interior space of the closet is filled depending on the number and type of clothing, as well as on the preferences of the owner of the room.

It is important to remember that the design of the internal layout of the filling of a wardrobe for any purpose must be based on clearly verified measurements.

Hand-made assembly according to your own drawings often contributes to the practical distribution of space. The owner always knows better than to fill an empty niche, whether to create an additional empty module for installing a television monitor, or to hide it with doors.

Depending on the location, there are several templates with easily redesigned modules. Some tips for planning the internal equipment of built-in wardrobes:

the quantitative number of doors, as a rule, is equal to the number of compartments, with the exception of wide doors, behind which two sections can be placed;
the wardrobe module with a bar is made wider than the compartment with shelves;
the opening of the section for storing linen in height is no more than 40 cm, which is the most convenient option, while from 25 to 35 cm are allocated for books, depending on the printed publication;
for the clothes compartment, the best option is to create two compartments - for short clothes, with a module height from the bottom partition to the bar of 100 cm, and for long clothes, with a module height of 160 cm;
mezzanines intended for large items are made at least half a meter in height;
the total depth of the cabinet, equipped with longitudinal rods, should be planned to be at least 65 cm, for a module with transverse rods - at least 50 cm due to the door mechanism;
in the designs of drawers in which underwear will be stored, the dead zone must be taken into account - the frame of the compartment door mechanism, so that the drawers can slide out freely
the depth of the drawers is designed taking into account the presence of hinged handles, if any, the height of the front panels of the drawer must be at least 25 cm;
to pull out the drawers, it is advisable to use a ball-bearing mechanism that allows you to pull them out completely;
shelves over 90 cm must be provided with a partition so that it does not sag;
rods for hangers over 120 cm long must have a design with an additional rod resting on the floor with the lower end and tied to the upper shelf with the opposite end;
to install baskets, shoe racks, trouser holders or tie holders, it is necessary to know their dimensions in advance in order to avoid falling into the internal parameters of the compartment intended for them;
It is advisable to place the interior lighting of the cabinet, if this does not apply to the wardrobe, on the top panel, equipping it with 12 W halogen lamps;
It is not advisable to make separate doors for a large mezzanine; it will fit perfectly behind the common doors;
wardrobe compartments with rods should not be located in the outer compartments, since over time the outer modules, overloaded with things and not connected by shelves, may fall apart.

It is important to know that the content of built-in wardrobes depends on the intended purpose of the structure, which differ in the internal composition of the sections.

Filling the wardrobe in the bedroom

The predominance of large space in bedroom wardrobe designs determines the constant storage of bed linen and bedding. Clothes compartments, as a rule, are equipped with a pantograph - a retractable bar for hangers, equipped with a lowering device, and a standard version of the bar. The pantograph allows you to make maximum use of the upper volume of the clothing block of the closet.

Also, the filling of the wardrobe in the bedroom consists of the following blocks, compartments and modules:

compartment where mesh baskets are attached;
block with the inclusion of an end or conventional hanger;
a panel equipped with hanging hooks for replaceable and wrinkle-free clothes;
trouser hangers and tie holders with a retractable mechanism;
pull-out multi-level drawers storing small items - cufflinks, belts, handkerchiefs;
on one of the walls it is advisable to determine the place where the iron and folding ironing board will be hung;
compartments for lower shoe blocks, as well as a compartment for slippers.

Design and colors

Modern manufacturers and workshops working with custom-made furniture offer a wide variety of sliding wardrobes. The following materials are used for the production of facades:

mirrors;
artificial leather (or its substitute);
laminated chipboard;
MDF;
plastic;
rattan;
bamboo;
tree;
glass;
lakomat - frosted translucent glass;
lacobel - painted glass;
decoacrylic;
glass with Oracal film.

After solving practical issues related to the design of the cabinet and the place for its installation, then when choosing, they focus on the style of the room.

Mirrors

Eco-leather laminated chipboard MDF

Plastic

Rattan

Bamboo

Tree

Lakomat Lakobel

Oracal film
Panels can be complemented with various decorative elements:

sandblasting pattern;
half-timbered lattice;
photo printing;
painting;
film stained glass;
fusing (decoration made of multi-colored glass, which is sintered at high temperature);
spraying;
laser engraving;
mosaic elements;
veneer;
images created using airbrushing.

How to choose components for a wardrobe, useful tips

Due to the variable design possibilities, such furniture is used in interiors of a wide variety of styles. The most common are models made in modern design styles. Less commonly produced are cabinets with sliding doors in classic, Italian, as well as such styles as baroque, art deco, empire, retro, Provence, and country.

Sandblasting drawing

Photo printing

painting

Stained glass Fusing

Engraving

Mosaic

The palette for facades includes many colors and their shades. A specific tone is chosen taking into account a number of nuances. You definitely need to make sure that the color compatibility of the cabinet, other interior items (including furniture and decorative elements) and walls. It is also important to take into account the style of the room and personal perception.

Tips from designers on how to combine colors in the interior:

Use a mono palette. One color is taken as a basis. The interior will have 3 options: basic, light and dark. You can determine the required tone using a color wheel, in which similar colors are adjacent, and contrasting ones are at opposite ends.
Choose contrasting shades. It is important not to overdo it, otherwise you can create color dissonance, which will only cause irritation.
Use 2 colors close in color palette + add one contrasting one to them.

Designers do not recommend tying the color of furniture to the shade of the floor and entrance doors.

Monopalette

Contrasting shades Shades similar in color palette
Popular options are cabinets:

with a mirror facade, which creates a visual effect of expanding the space;
with glass transparent (translucent) sliding panels;
with a plastic glossy or matte surface.

How to create a wardrobe design on your own, stages and nuances of work

Options that include a transparent door are rare. Facades that sharply contrast with the color of the walls, as well as those that completely match it or are close in shade are considered relevant. Designs intended for living rooms and bedrooms are often complemented by a compartment for a TV. Some are equipped with open shelves for small things and comfortable cabinets. They are also equipped with compartments for outerwear with hooks and space for hats.

Mirror facade Glass sliding panels

Plastic surface

Filling the wardrobe in the hallway

The specificity of some hallway cabinet designs lies in their non-standard dimensions. The optimal width of built-in furniture of this plan corresponds to only 0.4 meters with standard parameters of 0.6 m. For such narrow wardrobes, it is possible to install transverse rods for hanging hangers.

The correct design for filling such a closet will allow you to place the maximum number of things in the closet. It is very important to have a modular unit in the hallway that allows you to store seasonal clothes, as well as a separate dimensional section in the lower location of the shoe closet.

We should not forget that excessive loading of a wardrobe in the hallway with irrational design of sections leads to a loss of functionality of the object.

Online designers for planning a storage system in a closet

If you are going to buy a custom-made wardrobe system, rather than ready-made, use special services that allow you to draw your future wardrobe in 3D format. It's easy to find free programs on the Internet.

Available functions:

cabinet design;
entering the required module sizes and number of door leaves;
planning the location of shelves, drawers, crossbars;
choice of material, color, finishing design.

For inspiration, look at our photos. Show the drawing created in the designer to the individual order executor.

Filling the wardrobe in the nursery

To ensure the safety of the child and teach him order, the filling of the wardrobe in the nursery is selected in the most careful way.

The upper zone is temporarily reserved for the needs of adults. The lower compartments are designed in such a way that the child has access to his personal belongings. The modules are created in such a way that as the child grows older, he can independently use the entire closet.

Lifting and sliding mechanisms are selected from simple but reliable systems that cannot be disassembled by children. There should be no discomfort in using retractable drawers for a small person, so that the child can freely pull them out many times, without fear that any of the mechanisms will break.

Sliding wardrobe 3 meters wide internal filling. What departments should there be? Cabinet and built-in wardrobe: similarities and differences.

Step-by-step instructions for making a cabinet

We will tell you the instructions for assembling a sliding wardrobe of standard sizes. Manufacturing material – laminated chipboards.

Step 1 . Draw a sketch. It must indicate the overall dimensions and all internal contents. Take your time, try several options, carefully consider the placement and parameters of shelves, drawers and other elements. Decide on fittings and special devices for storing clothes, hats, bedding, shoes and various small items. Make a detailed list of the name and quantity of fittings.

A detailed drawing will help you accurately calculate materials

Practical advice. If the cabinet is the entire length of the wall, then the side panels of the cabinet do not need to be installed, but the parts can be fixed to the walls. This reduces the cost and increases the stability of the furniture.

But such a solution cannot always be considered optimal. If you live in regions with a cold climate or have doubts about the quality of insulation of facade walls, then it is strictly not recommended to use them as side walls. The fact is that they will not heat up, mold will appear on the surface, all the clothes and bedding in the closet will acquire a very unpleasant smell, and there is a risk of complete damage.

Installation of a wardrobe between two walls

Step 2 . Calculate the number of parts that need to be made from chipboards, measure their total area and draw drawings. You can cut the elements yourself or order them from professionals. We strongly recommend using the second option. Why?

They have high-precision equipment and qualified personnel, which guarantees the quality of work.
Many companies can create an electronic map of material cutting - saving expensive slabs.
Order fulfillment time is minimized. The entire cutting takes no more than two to three hours, the customer has the opportunity to order and pick up the parts immediately. Another important point is that if desired, the cut will be edged; at home, it is quite difficult to perform such an operation efficiently.
If for any reason the parts are defective, their cost will be compensated by the contractor.

It is best to order material cutting from specialists

If you count all the benefits, then in total they far exceed the losses on paying for the order.

Step 3 . Prepare a place to install the side wall. To do this, make slits in the baseboard and baguette. The width of the slot is equal to the thickness of the slab; use a laser level to control the verticality of their position. Remember that the slabs must rest closely against the interior partition. It is not recommended to install a sliding wardrobe to a façade wall; we discussed the reasons above.

A cutout is made in the baseboard for the cabinet wall and the verticality of the surface is checked

Step 4 . Cut the slab to size using a hand-held circular saw and a straight edge.

Before cutting the sheet, it is important to correctly mark the cutting line

Important. Be sure to measure the height of the ceiling where the side panel is installed at two points: near the wall and the edge of the slab. Unfortunately, some builders do things poorly; ceilings or floors do not lie in a strictly horizontal plane. If you do not take this into account and cut out a rectangular sidewall, then gaps will appear between it and the floor or ceiling. It is necessary to cut the slab only according to precisely measured dimensions; often it turns out not rectangular, but similar to a parallelepiped.

Step 5 . Screw the sidewall to the wall with special corners, which are fixed to the surface with dowels. Fasten it very securely; great forces are exerted on the sides when opening/closing the doors. Remember that it is always much easier to prevent elements from swaying than to eliminate its negative consequences later.

To fix the sidewalls, use plastic corners with dowels

Step 6 . On the opposite wall, screw the sliding door stop rail. We have already said that you can use a wall as the side of a cabinet only if it is not load-bearing, but interior.

Fastening the thrust rack

Step 7 . Measure the length and saw off the top door guide. Check its placement on the ceiling and only then fix it. This is where problems can arise. If your floor slabs are concrete and the finish is cement-sand plaster, then everything is in order. If the ceiling is made of plasterboard boards, which are very fashionable today, then you need to carefully attach the elements to them. The strength indicators of such slabs are unsatisfactory; it is very difficult to reliably fix elements to them. Ideally, it is necessary to install special gaskets between the slabs and ceilings and fix them to the concrete slabs. And then screw the guide to the installed element. In practice this is difficult to do. It is recommended to use special dowels, but they cannot guarantee the required strength. There is only one way out - use sliding doors very carefully.

The guide rail is screwed to the ceiling

Step 8 . Proceed with the installation of vertical internal partitions. You should also cut holes for them in the baguette and baseboard. Otherwise, the technology is no different from installing a side wall. Do not forget that these partitions are narrower than the side partitions by the thickness of the doors. But in practice, it is better to increase the gap, this way possible deformations or minor errors made during the manufacture and fastening of parts are compensated.

Make a cutout in the plinth for the vertical lintel of the cabinet

Step 9 . Mark the location of the horizontal shelves and drill holes for them. The shelves must be secured with euroscrews; this increases the strength of the structure and minimizes the risk of wobbling. For Euroscrews, you need to have a special drill; it prepares all the holes for complex fasteners at once.

The height of the shelves is marked on the side wall

Step 9 . Buy parts for sliding doors; the kit includes hardware, guides and additional elements.

The guide profile and fasteners are best purchased together with the door

Step 10 . Measure the height, cut off the excess and insert the end decorative aluminum profile. The manufacturer milled a groove for it.

An aluminum profile is placed on the end of the door leaf

Step 11 . Screw the end profiles to the door leaf and secure the wheels. Place it in place and check the functionality, making fine adjustments if necessary. The remaining doors are installed using the same algorithm.

The final stage is installing cabinet doors

At this point the assembly work is completed, clean up and use the cabinet.

Video - Filling wardrobes

Now you know how to fill a closet so that it can fit the maximum amount of clothes and shoes. We have given only general advice; each housewife has her own preferences. Such furniture is used very often, and this causes periodic failure of structural elements. Most problems can be fixed on your own; there is no need to call an expensive specialist. On the pages of our website there is a useful article about ways to adjust various types of sliding wardrobe doors.

Filling the wardrobe photo of the internal layout

Built-in furniture is created for a comfortable existence and rational use of the entire area of the room. The main criterion for planning the filling of a wardrobe is its location in the home. We present a series of photos of the internal layout and design of cabinets for various purposes.

A variety of three- and two-door wardrobes for hallways:

Dressing room alternative:

corner wardrobe:

and a five-door wardrobe

Sliding wardrobe for the children's room from Baltic designers:

A wardrobe in the hallway is one of the most necessary pieces of furniture. What should a proper closet look like inside? You need to consider who and what things you will need a closet for. For some, shoe shelves and a couple of hangers will be enough, while others plan to store bedding, bags and even a washing machine there.

Here, for example, everything is arranged not only rationally, but also with the use of unusual shelves, for example, a dynamic shelf in which every little thing can be conveniently reached.

Tips for choosing

The choice of suitable furniture with 4 doors should be based on such basic points as:

Placing a closet in the room. It is recommended to take measurements in advance and decide on its location in the room. In this way, all the nuances will be taken into account, including convenient space for passage and the ability to place a maximum of things.
Internal filling. It’s also worth taking care of it in advance: decide for yourself whether you need pull-out baskets, a tie holder, a compartment where you can hide a large suitcase.
Facade and interior design. These components must overlap and be within the same concept. The design of doors and walls can be close or contrasting. The main thing is that the furniture does not disturb the overall style of the room.
Reliable sliding mechanisms, durable fittings. If you do not pay attention to the fastening elements, there is a possibility of purchasing a cabinet with which problems will begin after just six months of use.
Reliability of materials. It is advisable to choose high-quality raw materials, the safety of which is confirmed by certificates.

A sliding wardrobe with 4 doors is the optimal solution for spacious rooms and large families. Such furniture is not only comfortable, but also serves as an excellent addition to the interior. The main thing is to consider all possible options before purchasing it, and also clearly define your wishes.

It is recommended to decide in advance on the location of the closet in the room.

It is equally important to consider the internal content, the number of shelves, rods and additional compartments. The design of the facade must correspond to the general style of the room.

Reliable sliding mechanisms and durable fittings are the key to long-term operation of the cabinet

For manufacturing, it is advisable to choose raw materials whose quality and safety are confirmed by certificates

Proper filling of the wardrobe

There are no specific rules. The main thing is to think through everything in advance and draw a sketch. You can even make a cabinet yourself using ready-made drawings. It is important to consider the size of your hallway.

For a small family or even one person, a single-door wardrobe is suitable. But the number of sections is at least two. The cabinet should be divided into sections. It is convenient to leave shoes or even sports equipment here; such a closet resembles a small room, but it takes up little space.

For your convenience, the interior of the closet in the hallway should contain hangers, shelves for shoes, drawers for gloves, hats, mittens, possibly stands for hats and umbrellas. If the hallway is spacious enough, a sliding wardrobe can replace an entire dressing room with a mirror and space for changing clothes.

The width of the shelves is at least 80-90 cm, but there is also an option for narrow shelves (40 cm) if there is no space at all in the hallway.

For outerwear: coats, raincoats, fur coats, the height of the closet should not be less than 140 cm. It is most practical to place the crossbar (it serves as a hanger holder) not deep into the closet, but across it.

This closet not only has convenient shelves for clothes and accessories, but also a decorative corner shelf for small items.

Features of organizing the interior space of a compartment - photo examples

The nuances of the arrangement of sections largely depend on the dimensions of the wardrobe.

Two door

Compact model for small rooms or hallways. Modest dimensions require careful consideration of the contents to fit everything you need. The main elements are a hanging bar, shelves and drawers.

Possible combinations:

1 crossbar, 5 shelves, 2 drawers;
1 rod, 6-7 shelves;
3-4 shelves, 1 crossbar, 1 compartment for large items.

In such a small closet, a vertical hanging organizer for accessories and small items is appropriate.

Three-door

There is more space than in the previous model, so it is easier to think through possible filling combinations. Usually the area for hangers is in the center, and around it there are shelves and drawers. There is a lot of space, you can install 2-3 rods at once, store large items and household appliances.

Angular

It is made in the shape of the letter “G”, trapezoid, triangle. A great solution for small rooms.

What to place in the corners:

triangular shelves where you can keep jewelry, accessories, underwear and other small things;
vertical objects - skis, fishing rods, umbrellas;
a rod with rounded ends on which compact accessories can be hung.

The number of internal elements of a wardrobe depends on its dimensions.

Radial

Radius wardrobes have flexible shapes (winding, concave, convex), so they fit perfectly into any layout. They can be placed either along a straight wall or in the corner of the room.

Typically, such models have narrow and wide sections, the former are suitable for shelves, and the latter for crossbars, an ironing board, and a vacuum cleaner.

Two meter width

Not a very roomy option, so it’s difficult to fill it correctly. Usually, one large section is allocated for hangers and hangers, and the space around is filled with shelves, drawers, and baskets. Various hanging, retractable, rotating organizers would be appropriate, where you can put much more small things than on a regular shelf.

Three meter width

The width of 3 m already allows you to install several rods and create large compartments for storing household appliances. Fill the rest of the space with different storage systems.

Possible solutions:

4 shelves for folding things, 1 bottom for shoes, 1 compartment for hangers, 2 drawers, under which there is space for large items, and a mezzanine;
8 shelves for clothes, 1 for shoes, 1 more above the bar, 1 crossbar, 6 drawers and a mezzanine.

If you are making a long shelf above the hangers, you need to install a vertical pipe on which it will rest. This will prevent it from sagging

Practical wardrobe inside - features

There are much more filling options for two-door and three-door cabinets than for one-door cabinets. Items designed for storage may include bedding, seasonal clothing, tablecloths, towels, magazines, and even built-in sections for jewelry and beauty supplies.

Metal cabinets are very convenient; dirt and debris do not accumulate in them, and they are also very light, which is important for complex structures.

The width of the shelves varies from forty centimeters and more.

The arrangement of things in the closet can be done according to a very convenient scheme:

In the middle are frequently worn items so that they are always at eye level.
On top are rare and unnecessary items, such as hats or carnival costumes.
The most bulky and heaviest things, such as suitcases, are stored at the bottom.

Storage Dimensions

The dimensions of storage systems depend on their type, the features of the cabinet and the wishes of the owners.
Here are the optimal characteristics:

for shelves - width from 40 cm (optimally from 60 cm), height from 30 cm;
for baskets – width from 25 cm (optimally from 40 cm), height – from 20 cm;
for boxes - width from 30 cm (optimally from 40 cm), height - from 15 cm.

You should be flexible in determining the right sizes. If a child will use the closet, you can choose the minimum dimensions, but if bed linen will be stored on a shelf or in a basket, it is better to plan a height larger than the standard one.

For wrinkle-resistant items

Things that do not wrinkle are placed on regular open shelves. In most layout options, such shelves are located in the middle zone of the cabinet. The width of such shelves is usually 50 cm, and they perfectly fit sweaters, raglans and other knitted items that cannot be hung on hangers so as not to stretch or deform.

For things on hangers

Things made of delicate fabrics - thin blouses, shirts - are stored on hangers. This form of storage makes it easy and quick to find the item you need. The normal density is 1 hanger per 5 cm of space. The minimum acceptable value is 2 cm. Knowing these parameters and the number of things that need to be hung, you can calculate the width of the compartment for them. The length depends on the length of the things.

Trousers

There are crossbars on which you can immediately hang clothes, for example, trousers. They then do not require separate hangers - the crossbar is already equipped with a set of rods designed for clothing.

For shoes

To store shoes, use a shoe rack - a special built-in cabinet or shelves designed for shoes. It ensures proper storage of shoes, protects them from wrinkles and allows each pair to be installed separately.

For ironing equipment

It’s convenient when you can iron the desired item right away, which is why an ironing board is often built into the closet. This will require a separate compartment. When unfolded, the board is placed across the cabinet and put back after use.

For little things

It is easier to find any small items in a shallow storage area, so you can use drawers for them. And for organization, use separators.

What cabinet filling should I choose?

A corner closet occupies a non-standard hallway area. A corner closet is a mini-wardrobe; a lot of things, especially non-standard sizes, fit in the occupied space.

A straight cabinet holds less space, but it is easier to fit into the overall interior of the hallway.

Make sure that the closet does not interfere with the passage to other rooms. The hallway should be comfortable and spacious. The internal elements are made of a metal frame to make it stronger and more reliable. Check that the doors move smoothly and without jerking.

You can put boxes in large cabinets, like in this photo, then the cabinet will look neater.

Such a cabinet is sometimes inconvenient due to its narrow code and rather voluminous structure.

Pay attention to whether the lighting is located here; sometimes there is not enough light in the hallway to find something or choose an image.

To store men's belts and ties, special pull-out holders or shelves with cells are used as the internal filling of the cabinet, which are attached to the sides and are very convenient to use. Shoe boxes (nets) are practical, but they should not be located close to the floor (dirt accumulates under them and is inconvenient to clean). The width of the mesh can vary from 30 cm (for a pair of shoes) to 100 cm or more.

Built-in wardrobes in the hallway are quite convenient. The top bar goes under the ceiling. There is no free space left on the sides either. Thus, the entire area is used to the maximum.

It is not very convenient to place the crossbar deep into it; there is not enough room for outerwear. But then the closet may not be very deep.

A very rational idea to put a washing machine in the hallway closet. Often in small apartments this is the only place where it will fit..

And here the ironing board is also included.

There are suitcases on top here, although here you need to be sure that they are not very heavy.

Wooden and pull-out shoe shelves are not always practical, because they often get dirty and sand accumulates there.

It is very convenient to store shoes in the pull-out metal shelves, so they will also dry properly.

In any case, we must remember that the wardrobe is designed for more than one year. Therefore, the design of the internal space must take into account the perspective and maximum filling, as well as the features of the hallway in which it will stand.

In the latter option, both closed cabinets and open hangers are very conveniently located where you can hang casual clothes.

Proper space planning requires a great deal of experience. In this article we tried to draw your attention to the main points of the correct layout of a wardrobe.

It is better to make the total depth of the wardrobe at least 65 cm, since 10 cm will be spent on installing the door mechanism.

For short items, use 2 parallel rods on top of each other, so you can fit more clothes.

Make drawers and baskets at a height of no higher than 120 cm, otherwise they will become inconvenient to use later.

Based on practice, the optimal distance between shelves is 35-40 cm.

It is better to hang the barbell at a height of 170-190cm from the floor; if you hang it higher, it will be inconvenient to reach; hang it lower - you will not be using the space optimally.

If you place 2 rods under short clothes one above the other, as we advised above, then the most optimal distance between them will be 80-100 cm.

Ideally, you need to measure the length of the clothing and add about 20 cm to it (then the total height of the hangers themselves will be taken into account with the distance from the top shelf to the bar itself.

Accessories for sliding wardrobes (shelves for shoes, hangers for ties) always fit few things, and they are not cheap.

To store shoes, it is better to use regular shelves on which shoes can be placed in 2 rows or in boxes.
Since large items are usually placed on the mezzanine, its opening height should be 45-50 centimeters.
Provide drawers for storing underwear .
The height of the front panel of the drawer is 20-25 cm, but remember that the height of the drawer box is 3-5 cm less than the front panel, this depends on the type of guides.
It is better to use full extension guides, because it is convenient when the inside of the drawer extends completely.
And also, never make empty openings with rods in the outer compartments of the cabinet , because the side panel may simply fall off if the door hits you. Shelves will solve this problem - they will connect the side panel of the cabinet with the entire structure.

It is worth saying that in each situation everything is individual: only you can decide what your wardrobe will look like inside, how much space can be used for a wardrobe, how many shelves and what to make it for, but be sure to consult with a specialist.

Features of filling a corner compartment

There are two main types of construction:

With a partition. In this case, operation becomes significantly more difficult, since useful space is lost and it becomes inconvenient to use the right angle.

No partition. In this case, you can order a pole that is placed in the middle. Partitions are connected to it and additional storage space appears.

The second type is preferable. It will allow you to accommodate more clothes, equipment and small items, but takes up little space

The side parts are filled in the standard way, like ordinary wardrobes. You can put small change, various photo frames or books in the corner.

Internal space planning by zones

Visually, the space can be divided into three parts: upper, middle and lower. This is exactly how you can arrange clothes inside a wardrobe.

Lower

Depending on the room where the wardrobe is located, you should choose the filling. Most common types:

Hallway. Models for this part of the apartment have a non-standard shape. They often have a narrower shape, but are longer. The lower sector is designed in such a way that it is comfortable to store shoes and care products there: brushes, various types of oils and creams, additional insoles, etc.
Bedroom. In this furniture, the lower compartments often have a lot of free space. Therefore, it is best to keep bedding items there, such as blankets, sheets, pillowcases, etc. The compartments can be enough for several sets of bed linen. Some models have a modular structure of this zone. Spacers can be rearranged, their size and length changed.
Living room. It is not customary to store household items in this room. Therefore, equipment that is installed in this room can be stored there.
Children's room. Shoes for children are rarely placed together with adults, so that they do not get dirty. Therefore, keep seasonal shoes in the lower compartment. It is also suitable for bedding and toys.

Average

The middle sector is the main part of the wardrobe. Used for heavy outerwear and casual wear. The height of the compartment can be one and a half meters, which is enough to fully store jackets, blazers and coats on hangers. In addition, the middle compartment often has shelves and movable shelves for storing trousers, T-shirts, and shirts. That is why the bulk of littering occurs in this zone.

How to order a wardrobe

Take advantage of a free consultation with our specialist. A home visit and individual closet planning are provided. You can also place an order right on the spot.

Specialist consultation

Ordering a wardrobe is only half the battle. And the second half of the battle. And the first and most important thing is to plan what the inside of the wardrobe will look like. Correctly defined needs will bring satisfaction in the future when using the cabinet.

The structure of the sliding wardrobe consists of:

shelves;
drawers;
rod;
mesh baskets;

This is the minimum required set that should be in any self-respecting closet. Now a little more detail.

Universal modules

Each manufacturer tries to get maximum profit and profitability from its activities, and this is achieved by increasing the number of sales of products and reducing the estimated cost of their production. At the same time, the comfort of using sliding wardrobes increases and their cost decreases. The technology is simplified by using universal modules. They make it possible to assemble a wide variety of models at minimal financial costs, and this situation satisfies both manufacturers and consumers of furniture. What modules are used in sliding wardrobes?

Table. Cabinet filling elements

Name	Brief description of purpose and operational parameters
Shelves	They can be stationary (non-removable) or ordinary. They are used for storing clothes and items, at the same time increasing the stability and strength of the structure. Placed over the entire height, there are models in which the user can independently change the installation areas of the shelves and thus adapt the cabinet to individual needs.
Drawers	Most often they are located in the lower part of the furniture, less often they can be seen in the middle part. Original furniture models, made to order, may have small drawers in the upper sections of the wardrobe. They are used for storing small piece items and items; sometimes they contain light indoor or summer shoes. There are models in which metal baskets are installed together with the drawers.
Pantograph and clothes rails	Clothes hangers are hung on these elements, with different distances between them, which makes it possible to place large and small items of clothing. The pantograph allows you to mount not one, but two rods on the same level, this doubles the capacity of the wardrobe. Another advantage of the element is that it tilts; in this position, removing clothes is much easier.
Hooks	The simplest, but very effective and versatile devices for placing various piece items and outerwear in the closet. Hooks can be simple or complex, made of plastic or metal alloys, and have additional devices for fixing hats.
Stationary or movable shoe shelves	They are located in the lower sections of the furniture; there are options for retractable or folding, inclined or horizontal, solid or mesh. It is recommended to install such shelves in all wardrobes, regardless of their specific placement.
Retractable hangers	When folded, they take up almost no space; when disassembled, they are used for storing heavy winter clothes. Most often they are made of durable metal alloys. Folding hangers are mounted in the free space of the closet, which creates favorable conditions for drying wet clothes.

We have listed the types of modules used, but they can be used selectively; a specific set should take into account the operating features of the wardrobe as much as possible.

Additional items

The internal structure of the wardrobe can be supplemented with elements such as a trouser holder or a tie holder. For those who like to wear a suit, it is very important that the trousers are not wrinkled. A trouser will help save the situation.

But you can quickly choose a tie using a tie maker. The entire stock of tie models you have will be presented to your attention. Some manufacturers offer tie makers with special lighting. To make it easier to decide whether this tie matches your shirt and jacket.

There is also a separate hanger for belts. If this is not available, the belts can be stored rolled up.

If the depth of the closet is shallow, a cross hanger is suitable for placing a large number of things. Clothes will be placed parallel to the wall, which will save space.

Also, the inside of the closet can become a refuge for many, many more items. For example, with the help of a special mount, a vacuum cleaner hose will fit perfectly here.

To make the most of the internal structure of the wardrobe, do not rush to choose the standard option. Think for yourself, consult with a designer, apply non-standard solutions. And then the whole world will fit inside your closet. The world of your favorite things.

Happy device!

Optimal layout and rational use of space is the key to comfort. The placement of furniture in the room is a key factor.

Thanks to individual design, a wardrobe can be organically “fitted” into areas previously considered oversized.

But just buying a cabinet is not enough. It needs to serve not just as “furniture”, but to become a functional item and help organize the necessary things. To do this, you need to know how to plan a closet inside.

You can easily arrange things of different lengths in it, and numerous shelves will help you freely place other small items.

First you need to decide on the location of the cabinet. It is this fact that will decide how it will look in the end: its depth, height, width, content.

Be careful when choosing a door extension mechanism - it should not be too noisy.

For a more specific representation of the location of the furniture, you can limit the place that is intended for installation to the available items. This way you can evaluate the space occupied in the room and adjust the dimensions of future furniture.

The sliding wardrobe will fit into most modern styles.

If you take an overview of all the components of the wardrobe, you can identify the main components:

Base (lower base);
System (base or “support”, this includes sliding devices - wheels, rails);
Furniture panels (walls, ceiling, floor);
Doors (may have different types, operating principle – sliding);
False panel (located in the part where it is better to hide the voids);
Frame or rod (located parallel to the door, or perpendicular, trempels are hung on them).

If you take an overview of all the components of the wardrobe, you can identify the main components:

Regarding the internal contents, the components here are known to everyone - drawers, shelves, compartments. They can be combined and achieve the desired results.

For example, if you are choosing a wardrobe for a bedroom, then there are some classic components that are present in almost every option:

- Shelves. Their number can vary depending on needs and can be located in any part of it;

This also applies to the distance between them.

— Drawers. Usually located at the bottom, depending on the purpose they have different depths and quantities;

Drawers are usually used as a chest of drawers.

- Barbells. For large sizes, one or more rods can be installed, which are used for hanging clothes.

The bar can be for short clothes (blouses, jackets, skirts) and for long ones (coats, raincoats, dresses).

If the filling of the cabinet is planned for the hallway and dressing room, then the composition will not be radically different. The only thing that may vary is the number of component elements depending on the purpose of the wardrobe. The lack of rods or drawers is likely compensated by the presence of plenty of shelves and storage compartments.

A variety of “fillings” can be chosen based on personal needs.

When choosing the location of the elements, you should also think about which family members will use them. For example, if a child is given personal space for clothes and things, then it should be placed in a place accessible for his growth. The compartment for this can be laid out like this: at the bottom there is a retractable drawer, a shelf and a rod for trempels. When planning a space for adults' belongings, consider whether there will be storage for items other than clothing (blankets, sheets, pillows, shoe boxes, etc.).

This will make the necessary layout of the wardrobe clear.

What sizes to choose

To determine the dimensions and choose the optimal filling of the cabinet, it is better to immediately take into account the factors that will become decisive in the choice.

1. Depth

If we talk about sizes, then everything is purely individual. But there are also standards that are often used. It's about depth. As a rule, it is 60 cm.

If we take into account the door system, it increases by another 5 cm.

But what if this option is not suitable? There is custom-made furniture to satisfy all customer needs in terms of depth, width, height of the product and even the design on the doors. If desired, you can order a structure with a depth of 40 cm and it will optimally “fit” into the interior.

For example, it is suitable for a corridor in which outerwear is hung and shoes are stored.

2. Height

The layout of the wardrobe inside and its dimensions should be adjusted as much as possible for all household members. It is worth taking into account, first of all, height and the ability to use a ladder or chair in order to reach the highest point.

Rarely used and seasonal items, bags and suitcases, and boxes of shoes are stored upstairs.

Usually, even hard-to-reach places are occupied by things that are rarely used in everyday life. For practicality reasons, many people purchase a ceiling-mounted cabinet.

In this case, you will not need to constantly shake off the settled dust.

3. Width

According to this criterion, there cannot be any rules, because the width is chosen purely on the characteristics of the room, the number of things it can accommodate, where it will be located and the wishes of the homeowners.

The wider the furniture, the greater the number of sections that can be there.

Putting a closet in a corner, if the space of the room dictates it, is not difficult. You only need to know the width of one and the second part. If the shape resembles the letter “P”, then, knowing the width of all parts, you can create a well-planned structure.

The number and width of sliding doors will depend on this.

Don't overestimate your capabilities in terms of size. If there is no need for a large wardrobe and there are no plans to purchase a large number of things, then you should buy a more modest-sized piece of furniture.

It is advisable to place small wardrobes in small hallways - standard products simply will not fit there, blocking the passage.

And vice versa - for a large volume of things, they initially consider purchasing a large-sized version so that everything fits and finds its place.

It is quite possible to place a large wardrobe in a spacious living room or bedroom.

Sliding wardrobe: how to plan correctly

For structures that will be located in different parts of the room, it is necessary to select its own individual internal component. Let's take a closer look at the basic configurations that are offered for different indoor locations.

1. Bedroom

Although the supposed presence of elements has already been described above, it would be useful to clarify many things.

Thanks to properly selected contents, such a closet can accommodate almost your entire wardrobe.

The usual contents of a bedroom closet must meet the following requirements:

Availability of space for folding bedding (shelves);
Storage of underwear (drawers with divisions);
Hanging clothes for everyday use (a rod with trempels, where it can be in two levels for clothes of different lengths);
Storage of accessories (drawers with divisions or shelves);
Household “needs” (ironing board, iron, steamer, hair clipper and much more will fit in the compartments between departments or in a special place designated for this).

It can easily fit not only your things, but also bed linen, additional sets of pillows and blankets, and even an ironing board.

2. Hallway

Since hallways in different houses and apartments have different shapes, widths and lengths, you need to select furniture according to these features. The wardrobe system has a sliding door type, it will suit almost any type of hallway.

Here it’s worth starting from the depth of the closet.

The hallway needs space for the following things:

Outerwear (barbell);
Shoes (shelves, retractable systems with storage spaces);
Accessories (shelves, drawers);

It would be appropriate to place a mirror on one or two doors.

A wardrobe in the hallway is indispensable for storing clothes for each season and numerous shoes.

3. Dressing room

How to plan a wardrobe inside for a dressing room? There is more room for imagination here, because you can place anything you want in the dressing room and in the quantities that the dimensions allow.

Thoughtful organization of space and storage of things will undoubtedly play into your hands.

You can place in the compartment:

All types of clothing, from underwear to fur coats or jackets (retractable structures with divisions and rods are used);
All kinds of accessories from earrings to travel bags and suitcases (pull-out top shelves about 50 cm wide);
Shoes (racks and holders);
Hats (shelves);
Household items (shelves, retractable systems).

The number of shelves, sections and furniture dimensions depend on the volume of internal space.

Rules for internal filling depending on location

Depending on the location of the wardrobe, the design of the internal filling will differ significantly from room to room, therefore, in order not to “reinvent the wheel” from scratch each time, there are certain rules that take into account these features, and on which, subsequently, it is necessary to apply individual schemes placing things.

For the hallway

For a hallway, a wardrobe is the most successful solution when organizing a storage system, since the sliding door mechanism provides free passage in a limited opening, and if there is a niche, you can create a full-fledged dressing room.

The internal filling of the closet must necessarily contain modules for storing outerwear, shoes and accessories. If possible, open corner shelves are additionally installed for various small items.

The upper part of the structure is reserved for storing rarely used and seasonal items, shoe boxes, suitcases, travel bags, etc.

In the middle part, at an accessible height, longitudinal and transverse rods for hangers are installed; in high structures, a pantograph is mounted, which allows you to easily lower the top rows of clothes. If necessary, holders for umbrellas, hats, and keys are added.

Closer to the floor, wire mesh baskets are installed for storing shoes, shelves for care products, and space is allocated for household appliances and tools.

It is important to note that it is recommended to use a mirror as a sliding door leaf, as it allows you to evaluate your appearance and quickly correct any deficiencies found.

For the bedroom

The bedroom is the most important room for every person, as it is a place of privacy, relaxation and sleep. At the same time, this room is a “storage room” for a large amount of clothing and various accessories that are not desirable to be put on public display. Therefore, in order not to clutter up the existing space, as well as to get rid of existing visual and physical trash, it is necessary to properly plan the storage system.

A spacious wardrobe for the bedroom is a real godsend, as it allows you to distribute all the available things in their own corners and free up your living space as much as possible.

The upper section of the closet should be used to place bedding - pillows, blankets, blankets, spare sets. There are also old bags, boxes with personal belongings, formal shoes that are worn for special occasions no more than a couple of times a year, and other rarely used items.

In the main part, casual clothes, pajamas, bathrobes, and towels should be stored on the shelves. Underwear and underwear are stored in drawers, separately for men and women. Delicate items - shirts, pants, skirts, dresses - are placed on hangers. You can place accessories, ties, watches, and documents in separate compartment sections. If necessary, the design can also be equipped with a folding or retractable ironing board.

The lower part is usually used to store the most bulky items - household appliances, boxes with mixed contents, hobby supplies.

For children's

A children's room is a multifunctional room that combines a bedroom, an office, and a playroom. A child’s room should not only have a special color and atmosphere of joy, but also provide space for active recreation, study and creativity, as well as ensure safety in all its manifestations, including when using furniture.

Since a wardrobe is purchased for more than one year, the design of the internal contents must be developed carefully, taking into account the age and gender of the child, subsequent growing up, and certain interests and hobbies. It is also important to hear his own suggestions in this regard.

The upper part of the structure will most likely be inaccessible to the child, so bedding, seasonal clothing, items for themed events and other items that are not useful in everyday activities should be placed in it.

When using the main section, the child should not make any effort to get the necessary item, otherwise there is an increased likelihood of injury - all items must be within reach. In this situation, it is most important to use a pantograph for easy access to high longitudinal rods on which jackets, shirts, trousers, and skirts will be stored.

Shelves below eye level can be used to store knitwear and underwear, while shelves higher can be used for hats and outdoor accessories. There must be a compartment for toys and creative supplies; a separate section can be allocated for fiction, textbooks, notebooks and stationery.

The lower tier is necessary for storing clean indoor and outdoor shoes, sports equipment, and large toys.

It is also important to take into account the manufacturing features of the structure - all corners must be edged with PVC edges, and the glass must be made using triplex technology or covered with a protective film to prevent the appearance of splinters. However, despite the complex of protective measures, experts still recommend abandoning the use of pull-out shelves in favor of baskets and plastic boxes when there are preschool children.

Installation

All components are manufactured both according to standard design and to order. The first option may immediately fit into the right place, or it may require an individual approach. Then the wardrobe will be made based on the client’s wishes.

As a façade decor, it is better to choose a mirror surface for at least one of the doors.

After using the wardrobe for some time, the layout inside may not meet the comfort standards of an individual family. Then you can modernize the existing filling of the cabinet by adding or removing some elements. To carry out installation, it is enough to have the necessary fittings and a screwdriver. In extreme cases, you can call a specialist.

For installation, special fittings are used - for elements that can be pulled out, doors, rod mounts, lighting, etc.

Types and dimensions

Foreign and domestic furniture manufacturers offer several options for cabinets with 4 doors.

Type of wardrobe	Characteristic
Hull	It is a free-standing structure with rear, side walls, top side, and bottom. Such furniture can be rearranged without disassembling it into components
Built-in	Designed for placement in indoor niches. The walls of the room act as the sides of the cabinet, the floor and ceiling act as its upper and lower boundaries. The model is convenient because the space can be used to the maximum: from floor to ceiling and from wall to wall. An additional advantage is that dust will not accumulate on the top panel and under the bottom. However, such furniture cannot be moved without disassembling it, and in order to mount it in another place, it will be necessary to adjust it to the dimensions of the new niche
Partially built	It differs from the previous model by the presence of its own sidewalls (one or two) and (or) a top panel. Such furniture can be installed both in a niche and in a corner. But in order to move a partially built-in wardrobe to another location, you will have to completely disassemble it and then put it back together again
Angular	This design allows you to rationally use the space in the corners, thus saving free space
Straight	Suitable for rooms of almost any configuration and style. Differs in a variety of designs: wooden, mirror, plastic doors, additional decorative elements
Radial	It is a model with curved shaped panels: concave, convex and concave-convex. With their help you can disguise the unsuccessful configuration of the room

Radius structures can be round, semicircular wall-mounted, corner, sector-shaped, or with a wavy façade. Designed for installation in corners, against straight walls or in the center of the room. Models with convex doors are considered the most spacious. However, a cabinet with a concave front allows you to free up free space for passage. This option is often used if you want to save space in the hallway.

The dimensions of production models vary in standard ranges: length - from 180 to 360 cm, height - from 200 to 270 cm, depth - from 40 to 70 cm. If standard dimensions do not fit a specific room, you can always order furniture according to individual parameters.

If you plan to store outerwear in the closet, experts recommend choosing a design with a depth of about 90 cm so that things do not wrinkle.

Hull

Built-in Partially built-in

Angular

Straight

Radial

What and how to store

Each item requires certain conditions for placement. In the design of the cabinet you need to be able to navigate and determine the right place for each item.

Baskets, plastic boxes, pull-out shelves - convenient devices for storing things

Rarely used items are stored in the mezzanines: suitcases, curtains, blankets, tablecloths, rugs, etc. Smaller textiles, towels, T-shirts, linen are stored in piles or rolled up. They use boxes, boxes, baskets.

Bags are placed on shelves or hung on brackets/hooks. Tights, socks, and underwear are folded and placed in a drawer with compartments.

Boxes for jewelry, small items, ties

Dresses, jackets, raincoats, fur coats and other items that require delicate handling are hung on hangers. Organizer boxes or honeycomb sections are ideal for decorations and small items.

Shoes are distributed on slanted mesh shelves at the bottom of the closet. Out-of-season - folded into boxes and placed on regular shelves.

Advantages and disadvantages

Four-door sliding wardrobes have positive characteristics:

functionality;
spaciousness (with comparative external compactness);
location of necessary clothing in the closest access area;
unlimited range of possible design options;
the presence of special compartments for storing things of different sizes;
good compatibility with bedroom, living room, office environment (with appropriate room sizes);
the effect of visual expansion of space (provided that the outside doors of the structure are decorated with mirrors);
the ability to store not only outerwear, but also shoes, hats, dresses, ties, trousers, and underwear;
easier maintenance of order and neat appearance of the room;
maintaining free space around the product (even when the doors are open);
the opportunity to independently resolve the issue with the internal and external configuration of the product, as well as choose the most convenient door opening mechanism (4-door wardrobes in the photo have non-standard sizes, so they are often made only to order).

The structure can be used to fill niches, hide defects in wall design, or zone a room.

But, no matter how many advantages there are, there are also disadvantages:

for most apartments and rooms, a wardrobe with 4 doors is too large a structure, taking up a significant part of the room where it is located;
the slides on which the doors move (if they are sliding) can wear out very quickly (especially if the product turns out to be of poor quality);
You can rearrange the four-leaf structure on your own only by completely disassembling it and then reassembling it.

If these points do not seem truly problematic to the future owner, then you can safely install such a 4-door wardrobe in your home.