Recommendations for reupholstering a kitchen corner with your own hands

Advantages of self-upholstery

For a novice home craftsman, reupholstering kitchen corners is not difficult. Simple design, availability of materials, simple manipulations simplify the process. Advantages of independent work:

• saving money without losing quality;
• acquiring a new skill (after wear and tear, restoration will be needed again);
• You can carry out repairs at any time;
• the opportunity to choose the materials yourself.

Companies offer calling a specialist to your home, taking measurements or removing furniture for subsequent restoration. All this is not cheap, and it takes a lot of time. Therefore, independence is more appropriate here.

A high-quality result cannot be achieved without disassembly, so you will have to spend time disassembling the structure and removing elements. This will allow you to change the coating without damaging other surfaces.

The owner independently assesses the condition of the structure. To strengthen it you will need fittings and suitable fasteners. To update the appearance of wooden panels, you will have to resort to using paint and varnish. To facilitate the process, tools and materials are prepared in advance.

Saving money without losing quality

Learning a new skill

You can make repairs at any time

Possibility to choose your own materials

About the restoration and types of repairs of kitchen corners

You can choose a new corner to suit every taste . But frequent use in a room with high humidity and frequent temperature changes harms the furniture. Over time, food and liquids inevitably leave stains on the upholstery, and the fabric can fray and tear. And now, a few years later, we have before us a strong set, but one that has lost all its luster.

The way out of this sad situation will be to reupholster the kitchen corner with new upholstery. The work can be entrusted to specialists, but independent repairs are also quite accessible at home for those who are not afraid and know how to work with their hands.

There are many advantages to reupholstering a soft corner with your own hands. Little skill is needed for such work, because the design is simple and the materials are available. Carrying out all the work yourself will save significant money. All materials can be selected to suit your taste. This is a great opportunity to gain and strengthen useful skills.

Upholstered furniture has the main characteristics:

• coloring;
• design;
• size;
• configuration.

Several years of use wear down the surface of the soft corner, and the design becomes boring. In addition to simply reupholstering furniture, you often want to introduce some innovations into the interior. If you think about such changes in advance, you can easily make them a reality during the process of upholstery replacement.

Let's consider possible options for modernization at home:

1. A fashionable option for finishing the back and seat in different colors. These can be contrasting shades or similar combinations. An extravagant combination of colored and plain is possible.
2. Patchwork style upholstery. Different pieces of fabric are assembled into a geometric pattern of squares, triangles, stripes, or a chaotic pattern of shapeless shreds. The chaotic pattern is very beautiful, but requires serious sewing skills.
3. Use of decorative elements such as buttons. This way you can emphasize the volume of the product and give it an original look.
4. Changing the configuration of parts that are not subject to load. A job requiring some carpentry skills. Decorative parts are first cut out of plywood, then attached to the back and sides. The last stage is decorating.
5. Adding armrests with soft, removable pads. Such a change will make the furniture more comfortable and bring something new to the decor. In addition, removable attachments are much easier to update than to do a full restoration of the sidewall.

Selection of materials

Restoration of kitchen corners requires a careful approach to the choice of material, taking into account operating conditions. Coloring, unusual texture, original design of the canvas are less important than wear resistance and quality. The material is chosen so that you don’t have to reupholster it every year, and the appearance is preserved as long as possible.

When choosing material for upholstery, preference should be given to non-marking colors. High-quality fabric is easy to clean; a budget option is more difficult to get rid of stains. It is better to take measurements based on the dimensions of the removed upholstery. If the kitchen is made in the same style, then the material must match in color and texture. The use of contrasting shades for backs and seats is popular. In this case, the corner will become a fashionable accent in the kitchen.

The upholstery of kitchen corners suffers from frequent use, and the fillings lose their elasticity. Sheets of foam rubber are placed inside. In order not to make a mistake with the size, add a centimeter to the measurements on each side.

Leather

Tapestry

Chenille

Flock

Foam rubber

Required Tools

The master will need the following tools:

• hammer;
• drill-driver;
• mites;
• spanners;
• stationery knife;
• glue;
• stapler;
• anti-stapler;
• scissors;
• marking tool.

All of the above is a minimum set. If the design is too complex, then additional tools will be needed. The consumables used are staples, glue, chalk, and furniture nails. If the condition of the furniture is completely deplorable, then you will need suitable fasteners, a jigsaw, sandpaper, and a pry bar. A screwdriver and wrenches will help you disassemble the structure. An anti-stapler and a knife are useful for removing upholstery.

The filler is not always easy to remove. If the manufacturer glued foam rubber, you will have to remove it with a knife and then clean the surface. High-quality glue will allow you to glue the upholstery (a special one is used), and a stapler will allow you to secure the fabric (furniture nails will also work). A knife is recommended for cutting material, and scissors and chalk are recommended for cutting.

Cost of reupholstering a sofa

Reupholstering a corner sofa includes a set of works, which is determined in each case individually depending on the condition of the furniture. The cost of the work is influenced by the size of the sofa and the complexity of the design. Also, the price depends on the selected material, the need to replace the filler, repair the frame and transformation mechanisms.

To find out how much it will cost to change your upholstery, use the online calculator on our website. You can also contact our manager for advice, who will help you make the necessary calculations and answer your questions.

Stages of work

Do-it-yourself reupholstery of a kitchen corner consists of the following steps:

• design analysis;
• removing old upholstery;
• removing the filler;
• taking measurements and developing patterns;
• sewing cushion covers;
• strengthening the new filler;
• securing new upholstery;
• decoration.

If the condition of the corner is unsatisfactory, then the replacement of drawers, panels and restoration of wooden parts will be added to the stages of work. Additionally, you may need to purchase and install new fittings and strengthen structural elements (if they are loose). Poor quality material wears out more over time, creating an additional problem - repairing weak bolts. Broken sockets are expanded with a drill, dowels are inserted (they are pre-coated with PVA). After the glue has completely dried, you can continue assembling the structure. Self-tapping screws must be used for fastening.

Removing the upholstery

Step-by-step instructions will help you reupholster your kitchen corner properly. An anti-stapler will get rid of staples. It is better not to use a knife for such a procedure, otherwise fasteners may remain in the wooden panel. To remove them, you will need pliers or pliers.

The upholstery is followed by removing the filling. Manufacturers often glue foam rubber to the base. A sharp knife will help to gradually scrape the surface, which must then be carefully removed. The remaining parts of the foam are also removed.

The entire process of removing upholstery, in the case where the design is the same as a non-separable sofa and the corner is completely covered with fabric, comes down to the following points:

• removing seats by removing hinged fasteners;
• backrest disassembly;
• separation of the box from the legs;
• checking parts for fastening and fittings;
• removing staples with an anti-stapler;
• getting rid of filler.

Removing the seats

Parsing the back

Separating the box from the legs

Checking fastening parts and fittings

Removing staples with an anti-stapler

Getting rid of filler

The process of removing the upholstery when the kitchen corner looks like a simple bench with a soft seat and back is divided into several stages:

• clear free space around;
• the frame is dismantled;
• the fabric is removed with an anti-stapler;
• check the corner itself for integrity;
• restore worn parts;
• remove old foam rubber;
• cut new foam rubber and glue it;
• the covers are pulled over the frame;
• fixed with staples on the reverse side without distortion;
• assemble the product.

The removed fabric will be used to clarify measurements, so its integrity must be preserved. Damaged or torn material will not allow you to determine the exact dimensions; for this reason, the structure itself is measured with an allowance for bending.

Disassemble the frame

Remove the upholstery

Restore worn parts

Replace old foam

Cover all parts with fabric

Assemble the product

Cutting fabric and filling

How to renew a kitchen corner after disassembling and removing the upholstery - more on this below. It will not be possible to achieve a high-quality result if you do not cut the fabric or cut the stuffing in advance. Previously removed material is used as a pattern. It is desirable that each element is sheathed in one piece. If this is not possible, then you will need to fasten the flaps together before laying out and tracing the pattern.

If the new upholstery is much denser than the old one, you need to add a couple of centimeters to the measurements. A flap that is too small will not allow enough tension in the fabric. As a result, the material will be damaged, and you will have to take measurements and cut it again.

The master must leave allowances that will be used for tucking and fastening. It is easier to work with the filler; it is simply cut along the contour of the piece of wood or plywood to which it will be glued. To keep the shape longer, add one centimeter to each side when cutting the filler. When fastening, you can use glue or staples (fixation in increments of up to 100 mm).

Cut fabric using old material

Trim the filler along the contour of the furniture

Frame repair

The design of most furniture quickly deteriorates. Before you reupholster the kitchen corner with your own hands, you need to inspect all the elements for wear. Accurate markings and careful, careful work without haste will help you avoid problems during subsequent assembly. One of the common problems is peeling coating on the legs.

Restoration of wooden parts takes place in several stages:

• cleansing from dirt and stains;
• removal of remaining coating;
• sanding;
• filling cracks and delaminations with glue;
• painting;
• fixing the result with varnish.

Any wooden element may require restoration, but a primer is needed before using varnish or paint. In the case when parts of the furniture are replaced with new ones, it is necessary to mark and drill holes in advance for subsequent fastening. Frame repair is a common need when reupholstering a kitchen corner. Elements that have fallen into disrepair are restored. If the wooden legs have lost their former luster or the coating has peeled off, then they are cleaned of external contaminants, sanded, varnished or painted. If cracks or gaps appear in the frame, they are filled with wood glue.

In case of significant damage, the part can be replaced entirely by cutting it out of chipboard. Accuracy and precise markings will make it easier to assemble furniture with a new element. In this case:

• legs are renewed;
• cracked plywood sheets are replaced;
• cracks and delaminations are filled with glue;
• Scratched boards are sanded.

To reliably glue the parts of the structure together, experts advise using clamps. They will press down on glue-coated surfaces without having to hold them with your hands. Clamps enhance the adhesive properties of the material and allow you to securely fasten parts.

Clean from dirt and stains

Remove remaining coating

Sand

Fill cracks and delaminations with glue

Paint and varnish

Reupholstery and assembly

Re-upholstery and assembly are carried out step by step:

1. Attach the filler with glue or staples. The standard step is from 5 to 10 centimeters. You will often have to install fasteners on curved surfaces.
2. The cut fabric is placed face down on the floor. The part is placed on top of it.
3. On each side the material is fixed in the center. Gently tighten so that no distortion occurs.
4. Fix in increments of 3 to 4 centimeters using staples.

If the design is complex or the padding is too thin, then we tighten the surface with a carriage tie. Furniture nails can be used as fasteners. This will increase the service life of the new coating.

Reassemble the kitchen corner in the reverse order of disassembly. Where the fasteners will subsequently be, all holes are drilled in advance. This will help avoid damage to the upholstery and filling. The duration and complexity of the work depend on the design. For example, when assembling a sofa from three components, the sequence of actions does not change, only the corner part is assembled first, and then the side parts.

Attach filler

Cover with fabric

Assemble the corner

How to decorate

The updated kitchen corner can be left unchanged or decorated. Several popular decoration options:

• decoupage;
• pillows with contrasting covers;
• adding bright accents in the form of rollers or blankets;
• decoration with inserts made of genuine leather or suede;
• use of knitted capes;
• hand painted;
• fastening plywood ornaments.

For decoration, stencils are used that will help you apply designs of varying degrees of complexity onto wooden panels. The use of fringe or tassels is no longer relevant. A repeating pattern is applied to the arms, legs and small plain elements.

You should not use more than two ways to decorate a kitchen set. Too much decoration will ruin the appearance of the corner. It is better to opt for a more concise option.

The decoupage technique should be used with caution. For decoration, one color scheme and one type of pattern are used. If the kitchen already has furniture or appliances decorated in the same way, then it is better to abandon this idea. Otherwise, the appearance will be rustic and rustic.

Even a novice craftsman can reupholster a kitchen corner. The main thing is to strictly follow the step-by-step instructions, do the work carefully and without haste. Updated furniture will decorate the kitchen.

Replacement of sofa upholstery

Our craftsmen replace the upholstery of a corner sofa in a certain sequence:

• After selecting the appropriate material and discussing the future design, the specialist disassembles the structure.
• At the next stage, if necessary, faulty transformation mechanisms and fillers are replaced, and the integrity of the frame is restored if it is damaged.
• Then the craftsman upholsters the elements with new material and assembles the structure together.
• At the final stage, work is carried out to decorate the furniture with buttons, borders and other elements in accordance with the chosen design.

If you need to reupholster a corner sofa, entrust the furniture to professionals. Our company employs experienced specialists who can perform work of any complexity. Thanks to a loyal pricing policy, you will not have to overpay for services.