Double-sided handle on a plastic balcony door: how to install or replace it? Types of double-sided handles for balcony doors, advantages, disadvantages, installation

Installing a double-sided handle on a balcony door is an important issue that should be approached responsibly. In order to efficiently install an element that no door can do without, you need to study the features and sequence of the process. And also at the stage of planning repair work, you should decide what exactly the product will be, because there are many different types of door handles.

Double-sided handle for balcony door

How to choose and install a handle and lock for a balcony door

If the balcony is well glazed and used as an additional room, the balcony door will be often used.
Over time, this can cause the handle to break or become jammed. To prevent such unpleasant moments or to choose a high-quality new pen, you need to be able to choose it correctly. After all, the modern market offers them in a huge assortment. At the same time, it must satisfy your requirements and be reliable in operation over a long period.

What types of balcony handles are there?

Currently, it can be made not only from plastic, but also aluminum, metal-ceramic or fiberglass. The use of these materials allows us to produce products with sufficient strength and reliability in operation.

But one of the main requirements for balcony handles is good resistance to high humidity, temperature changes and ultraviolet radiation. They should also ensure easy and simple locking of the balcony door, especially if the balcony or loggia is located on the first floors.

Types of handles for balcony doors

They can be divided into several categories:

one-sided;
bilateral asymmetric type;
with anti-burglary function;
with a conventional built-in locking mechanism;
shell;
petal.

They can also be classified according to installation method, appearance, material, shape, color.

The handle on any balcony door made of various materials can be installed on both sides or on one.

The single-sided handle basically has a fairly simple design. It is easy to use. It is installed in cases where it is necessary to open the door only from one side. Single-sided handles are in great demand due to their convenient use and simplicity of shape and design.

Double-sided balcony handles are traditionally made with identical shapes on both sides. They are connected, as a rule, using a special metal rod. This type of plastic handles is certainly more convenient to use.

A double-sided handle is usually made with a certain asymmetry. Both halves of it have the same appearance on both sides of the door. This type of handles is more practical due to the equipment with a special mechanism made of durable steel.

Door fittings with an anti-burglary function are equipped with doors at the exit to a balcony or loggia located on the lower floors. A special mechanism allows you to protect the premises from various unauthorized intrusions of intruders.

A metal or plastic handle with a simple locking device is installed mainly in families with small children. This allows you to exclude unwanted access of the child to the balcony.

A simple plastic structure called a petal is most often used on the outside of the door. Usually the toffee is made of the same plastic as the door itself. It is not equipped with a locking mechanism. Small self-tapping screws are used to secure the petal-type handle. The mounting holes on top are covered with a decorative cap.

This locking device can significantly reduce heat loss, which is most important on cold days.

The “shell” handle (also called “toffee”) can be purchased in two types: plastic or aluminum. Traditionally it is installed on the outside of the balcony. The handle of this type of balcony door allows you to conveniently cover the exit to this room from the outside. For example, if you want to smoke on a balcony or loggia. It can be easily secured to the door using short self-tapping screws.

Installation of handles on balcony doors

Installing door fittings such as “shell” or “petal” does not require great skills and a lot of time. All you need is a hand-held electric drill and a screwdriver. Since they are installed on the outside of the balcony, there is no need to remove the main handle. To fix them you need:

decide on the installation location;
place the handle on this section of the door;
mark the mounting holes and drill them;
screw the self-tapping screws into them through the fixing bar;
cover the mounting holes with a decorative cover.

It is a little more difficult to install a double-sided handle on a plastic balcony door.

Before performing this procedure, you must prepare:

screwdriver;
electric drill;
grinder or hacksaw;
set of installed handles.

Sequence of work:

1remove the standard handle;
2 marking the place for mounting the metal square of the product being installed;
3 using an electric drill and a thin drill, you need to drill through the profile of the blade;
4remove the metal hardware strip from the end of the balcony door;
5drill a hole for the connecting square;
6 make a groove in the end of the blade to install the rotary locking tongue of the lock;
7it is first necessary to assemble the handle and measure the permissible length of the square;
8Using a grinder or a hacksaw, cut off the excess;
9Finally assemble the handle on the door, mark the holes for the mounting screws;
10drill them with a diameter of up to 3.5 mm;
11 securely fix the double-sided plastic handle using self-tapping screws and holes drilled for them;
12 close the mounting holes with decorative covers.

The installation of the double-sided handle is complete.

Sometimes, as a result of insufficient or improper care of the lock and handle on the balcony doors, they begin to turn poorly or simply jam. This problem can occur when moisture gets inside the locking mechanism. To prevent this from leading to the handle breaking, its lock must sometimes be treated with lubricant by simply dripping 1-2 drops inside.

Plastering door slopes

Smooth plastering of the slopes of entrance doors in St. Petersburg is an important and mandatory stage of any repair. Performing the work in question at a high level is only possible if you have the necessary skills and select suitable materials.

Surface area	Cost of work	Turnkey cost
Walls (up to 100 m2)	35,000 rub.	from 60,000 rub.
Walls (100 - 300 m2)	250 rub./m 2	from 500 rub./m2
Walls (300 - 700 m2)	240 rub./m 2	from 480 rub./m2
Walls (from 700 m 2 )	230 rub./m 2	from 460 rub./m2
Ceilings (up to 300 m2)	350 rub./m2	from 600 rub./m2
Ceilings (from 300 m2)	340 rub./m2	from 580 rub./m2
Slopes (with dawn angle)	300 rub./m.p.	from 450 rub./m.p.
Additional services
Mesh installation	50 rub./m2	from 80 rub./m2

Surface area	Cost of work
Walls (up to 100 m2)	35,000 rub.
Walls (100 - 300 m2)	250 rub./m 2
Walls (300 - 700 m2)	240 rub./m 2
Walls (from 700 m 2 )	230 rub./m 2
Ceilings (up to 300 m2)	350 rub./m2
Ceilings (from 300 m2)	340 rub./m2
Slopes (with dawn angle)	300 rub./m.p.
Additional services
Mesh installation	50 rub./m2

Do you need to finish the door slope and opening with plaster? Then turn to specialists and save your money and effort. Good experienced craftsmen will be able to implement any project in the shortest possible time.

Door slope alignment

High-quality leveling of the door opening, which can be done using solutions with different compositions, performs many functions, among which it is worth highlighting:

giving a finished look to the room (after hiding the mounting elements, as well as cracks and finally smoothing the surfaces, you get a good base for other decor);
increasing sound and thermal insulation (if the process under consideration is carried out correctly, the microclimate in the rooms will be stable and little susceptible to outside influences);
protection of the mounting foam from sunlight (this determines the durability and reliability of the installed frame).

Taking this into account, if you want to plaster door slopes, then approach this issue wisely - delegate it to professionals. Without overpayments and delays, you will get the desired result as quickly as possible.

Plastering doorways

Today, plastering of a door (opening) slope can be easily ordered from us. I am pleased to offer our Clients favorable terms of cooperation, including:

prompt execution of work of any complexity (the availability of modern equipment and the necessary tools, as well as the considerable experience of each master - this is what makes it possible to deliver projects on time);
loyal prices (specialists systematically analyze the purchasing power of the citizens of our city and current market offers, which allows us to set an adequate price for the services provided);
the opportunity to consult with professionals (managers will help solve various problems of every Client who contacts them at any time).

If you are interested in such a service as plastering of openings after installing doors in St. Petersburg, then we can help. After cooperation, many Customers spoke positively about our results. Moreover, we are often recommended to friends and relatives. You will also be convinced that the assistance of a professional in some matters is very beneficial! Call without delay!

Handle repair and replacement - price

The cost of repairing or replacing a balcony handle is directly dependent on the volume and complexity of the work.

Name	U measurement	Price, rub.)*
Replacing the white handle	PC	330
Installing a colored pen	PC	from 550
Installing a handle with a key	PC.	from 700
Installation of a child lock	PC	from 1200
Striker	PC	from 150
Installation of the comb	PC.	200

The Healthy Window company offers a flexible system of promotions and discounts, thanks to which you can save significantly.

We inform you about the cost of service BEFORE the start of work, and the cost does not change during the implementation of the order. For all details, you can contact us by phone.

What types of balcony handles are there?

Currently, it can be made not only from plastic, but also aluminum, metal-ceramic or fiberglass.
The use of these materials allows us to produce products with sufficient strength and reliability in operation.

Door latches

Typically, door latches are used to secure the door when closing. They are of the following types:

Magnetic a latch consisting of two long-life magnets installed in the door body and a metal plate mounted on the doorway allows you to securely and silently lock the door when closing;
Read also: Crochet stool cover - 17 models with diagrams, descriptions and video MK
Roller a latch, very common, is mounted inside the door mechanism; when closing, the roller falls into a plate with a groove on the door jamb and is held in the groove by a spring mechanism, ensuring the door is closed;
Falevaya The latch differs from the roller latch by using a beveled tongue instead of a roller, but to open it you will need to use a door handle with a rotary mechanism. Therefore, such a latch is used in conjunction with a mechanical opening method.

Installation steps for double-sided handle

You need to carry out the work as carefully as possible, performing all stages consistently and carefully.

First of all, prepare everything you will need during installation:

double-sided handle;
screwdriver;
drill;
cutting machine;
knife.

Installation process:

Remove the old handle;
Drill through the door profile through the central hole in the fittings;
Unscrew the fastening screws to remove the hardware strip from the balcony door;
Prepare holes for attaching the handle on both sides by drilling the finished hole in the center to 8 mm;
Mark the markings for fastening the screws with a pencil, then make two 6 mm holes on both sides of the central one;
Replace the fittings and mount the handle, tightening the mounting screws well. If necessary, it is necessary to trim the protruding parts of the seal in the area where the handle is attached;
Install decorative screw caps;
When a double-sided handle is installed on a balcony door, you need to carefully check how it works on both sides: the part should not dangle, the door should open and close tightly, quite easily and softly, without interference or sharp sounds.

The variety of options for balcony handles allows you to choose the most convenient model for both sides of the door and for any operating conditions. A double-sided handle has a number of competitive advantages that force an increasing number of buyers to choose it.

Source: dveridoc.ru/montazh/dvuxstoronnyaya-ruchka-na-balkonnuyu-dver.html

Disadvantages of double-sided pens

If you take the issue of ensuring the security of your apartment seriously, it is not advisable to install handles on both sides of the balcony door. This is especially true when the balcony is located on the lower floors.

In this case, the fittings must be equipped with special anti-burglary mechanisms. But if the balcony or loggia is reinforced with bars or roller shutters, then the choice of a double-sided accessory is quite justified. Moreover, there are double-sided handles with keys that make it very difficult to enter the house.

If you decide that a double-sided handle is the best option for you, all you have to do is choose and install it correctly.

A little personal experience

My father knew that the balcony had to be closed to me and my younger brother at all times. For fun and games, we had a loggia open from time to time, which was equipped with a sofa and everything necessary for a summer overnight stay. Considering that we lived on the second floor, this was our “tree house” with my brother.

The loggia was located in such a way that the father equipped two doors. One went into the living room, and the second into the kitchen. Everything was so that we could happily run around in circles, trying to catch up with each other. Yes, children are happy about everything.

In the other room there was a balcony that was locked. My childhood passed in those days when metal-plastic doors and windows had not yet appeared on the market, and we did not know how to make a plastic door to the balcony ourselves. The castle was the only way to protect us from all the junk that was dangerous for a small child and that had accumulated in this amazing world that is located in almost every apartment.

We were strictly forbidden to visit these five square meters, because there was a lot of stuff there that could hurt or do something even worse. For example, my father stored slaked lime there for painting the ceiling, which is dangerous to the life of not only a child, but also an adult. There were also skewers, from which we so loved to eat shish kebab, and as a serious bonus, you could find an electric and entrenching tool, which dad and I went to work every day.

Fortunately, I was an obedient child and never went there. The balcony generally seemed to me to be a place where all the worst evil in the world gathered, and all the representatives of folk tales who personified something bad lived on my balcony.

Creating a warehouse from this part of the living space in which all necessary and absolutely unnecessary things are stored is a normal phenomenon. You don’t always have the desire and opportunity to take everything out to the garage or send it to your parents in the village.

Handle for a pvc balcony door: do-it-yourself selection and installation. How to replace an external lock

Balcony doors made of plastic have become part of the everyday life of modern people. They are quite durable, reliably protect the room from cold and dust, and do not require painting or complex maintenance. The handle for the balcony door should be sufficiently wear-resistant, withstand temperature changes, high humidity and exposure to ultraviolet radiation, and also have a comfortable handle.

Types of balcony handles

Depending on the purpose, there are several categories of handles for PVC balcony doors:

Single-sided rotary with locking mechanism. This model is identical to the window handle and is the most common option for the inside of a balcony door. The locking mechanism is activated by turning the handle to a horizontal position. The design also has ventilation and micro-ventilation modes.
Double-sided handle. It has handles on both the outside and inside. The locking mechanism is driven by any of the handles. This is very convenient when there are small children at home who may accidentally lock one of the parents on the balcony. Due to the fact that the balcony door overlaps the doorway, there is little space left outside for a standard handle, so the outer handle of the double-sided handle is narrower than the usual one or has a non-standard shape. Asymmetrical balcony handle with built-in lock

Handle with anti-burglary fittings. If an attempt is made to enter from the outside, the locking mechanism is blocked. It is advisable to use this design on the lower floors and when exiting to the terrace.
Handle with lock or latch. A key lock or push-button lock built into the handle prevents the handle from turning. This mechanism is usually installed to prevent small children from going onto the balcony. Locking mechanisms are usually not installed on plastic balcony doors.
Stationary handles – shell and petal. The shell is made of aluminum, the petal is made of plastic. They are installed on the street side so that the door can be closed, for example, while smoking, so that smoke does not enter the room. You can also install a handle-bracket on the side of the balcony, but this is inconvenient. Stationary handle-petal made of plastic

Material and appearance

The most popular option is a plastic balcony handle. This is a fairly durable and reliable option for home use. In public places, metal fittings are recommended. Well-known manufacturers use alloys of aluminum, steel, and brass. Metal pens are presented on the market in a wide variety of colors - shades of silver, gold, bronze and others.

Causes of breakdowns

The most common malfunctions of handles on plastic doors can be classified into three types:

The first case is simple wear and failure due to the end of the element’s service life.
The second case is the occurrence of any mechanical damage or it could be purely technical breakdowns.
The third case is improper use of the product.

Examples can be seen in the photo.

So, let's understand the reasons and the necessary actions to eliminate them.

Selection rules

A handle corresponding to certain parameters is installed on the balcony door:

Resistance to temperature changes. This is especially important when the balcony is not glazed. For example, a metal handle can burn your hand due to exposure to temperature in summer and freeze your hand in winter. But handles made of plastic and wood do not have this drawback. Aluminum models are more expensive, but last longer.
Moisture resistance. Condensation forms on the handle due to temperature changes. A high-quality model is not destroyed by corrosion and remains operational for a long time.
Safety. Unglazed balconies on the lower floors require protection from illegal entry into the apartment. The double-sided handle is dangerous. For security, the outer part must be equipped with a lock.
Thermal protection. The design and location of the handle should provide good tightness, which means maximum protection from cold air. There are designs with a protective device.
Easy to use. Not everyone wants to fiddle with the locking device for a long time when they get onto the balcony to hang out their laundry or smoke. There are simple shell-shaped handles that can be easily opened by hand and are not affected by a gust of wind.
Convenient design. The handle should have an easy and smooth move, in addition, be fixed in a certain position. It is believed that a high-quality handle is designed for 20 thousand turns.

Design differences

The handles used on balcony doors are divided into three groups.

Stationary.

Stationary handles
Such models are not associated with a locking mechanism. They are attached to the door leaf. Their shape is comfortable for the hand. The door opens by simply pulling the handle.

Very often the handles have the shape of a petal made of plastic. Another option is a shell made of aluminum.

Aluminum shell handle

Typically, these handles are installed on the outside of the door to cover it, for example, in case of smoking. At this moment, the magnetic latch holds the door.

Push.

This model has a latch. Its tongue is controlled by pressing the handle. If the handle is pressed, the tongue disengages from the strike plate and the door opens easily. When pressed, the tongue is in the striker and does not allow the door to open.

Push handle models are available in two versions:

One-sided. Opening is possible from one side of the door, which increases security against penetration from the balcony.

Step-by-step installation instructions

To install a new handle you need to do the following:

make holes in the profile of the canvas with an electric drill;
make markings for installing the metal base;
when installing the latch, you need to remove the plate that is located at the end of the blade;
make a hole for the connecting element;
assemble the mechanism in advance and measure the rod along the length; if it is longer than necessary, then it should be cut off;
secure the handle with self-tapping screws to the door;
Cover the caps of the screws with decorative overlays.

For more detailed instructions on how to install the handle, watch this video:

To avoid unpleasant moments, it is necessary to properly care for the fittings. Opening and closing the doors should be done carefully. Periodically lubricate the handles with a substance specially designed for this purpose.