A storage room is a practical solution for an apartment of any size. This is incredibly convenient, because you can store anything you want in it: old things, sports equipment, dishes, shoes, equipment. There are such things in almost every home, and it is they that create a feeling of disorder in the apartment when they are stored in a visible place. The doors to the pantry can be refined by decorating them with an arch or other suitable interior element, or you can go the other way - make them almost invisible. Today we’ll talk about how best to design closet doors in an apartment.
Non-standard options for closet doors in an apartment
When arranging a pantry, which consists of shelves or a full-fledged room, the installation of non-standard systems will be an excellent embodiment of creative ideas into reality. For pantries located in the kitchen, sliding doors are suitable, the design of which will hide some shelves, but leave most of them within reach. An additional advantage of this solution will be saving space.
Read also: How to make a crossword puzzle in Excel beautifully
Having a special corner for the pantry at your disposal, you can install regular hinged doors, suitable for a traditional, Scandinavian interior. Many people prefer wooden doors with a glass insert, which allows them to inspect the room without performing unnecessary actions.
Another unusual option is to install glass doors that visually increase the space. They are made from triplex, which is durable glass consisting of three layers (2 glasses and a film). Such products can have a glossy or matte finish.
Dimensions
The dimensions of the door must be determined in advance. You will need to measure the width of the canvas and its height. To do this, measure the opening and take into account the slope if there are distortions. A typical interior door has a standard width of 0.9 m. If it is a door at the entrance to a house, this value should be increased to 1.2 m. The height of the leaf is usually the same and is 2.1 m.
Read also: How to make a powerful blowpipe
The dimensions of the door cannot be determined if repairs are underway. You should lay the flooring, only then start measuring dimensions. The box must be 2 cm larger than the opening to provide technological voids.
Which pantry door is best to install in an apartment?
To properly design a storage room, you should take into account the area of the apartment.
To properly design a storage room, you should take into account the area of the apartment.
Read also: What to do if you have no brains
In a “Khrushchev” building, which is not very spacious, it is worth installing doors whose designs would save space.
In narrow and small openings, swing doors should be installed, but only those opening into the storage room. So the canvases will not interfere with the free movement of people around the apartment. You can also opt for sliding structures or compartments, so you can save space. An original, non-standard option for a small apartment would be to install mirrored doors that visually increase the space.
If the storage room is located next to another room, installing standard structures will not be a very suitable option. Such a design will spoil the wall, the elements will begin to come into contact with each other, which will have a negative impact on them over time. To avoid such problems, it is necessary to find an alternative option. Using fabric draperies instead of a door is a fairly popular option. Curtains made of thick fabric, lightweight and safe, are very suitable for storage rooms.
Manufacturing of sliding doors. Preparation
A place should be prepared for sliding doors. If this step is neglected, difficulties may arise during installation and operation of the canvas, and the installation site itself will look untidy. The old door is dismantled. The new place is cleared of dust. If there are cracks and irregularities, they are repaired. The level checks the evenness of the base. If there are deviations, they should be aligned, otherwise difficulties may arise in the functioning of the door.
Carrying out installation
In order to install a closet door in an apartment, you need to mark the places for the hinges on the frame and mark similar places on the door leaf. The location where the lock will be located, if provided, should be indicated. The door is inserted into the frame, which will allow you to check the marks. Now you can embed the hinges. The next step is to cut out the tongue for the lock using a jigsaw. It is installed after it has been possible to trace the outline on the canvas.
Work algorithm
Regardless of whether you are making small or large pantry doors, the process will be the same. The next step is to insert the canvas into the opening, level it and secure it with wedges. The design and its position are adjusted with a hammer, which should be removed along the wedges. Dowels and screws should be inserted into the holes.
Next, the box and the canvas are assembled together. A second person will help you with this, since the door will need to be screwed on with self-tapping screws, holding it suspended. Now you can complete the platbands. You can purchase them or make them yourself. The corners should be cut at 45˚ and secured with wood glue or nails.
Door decor with stencils
Old doors can be updated using printed drawings. It’s just a pity that not everyone has artistic talent. But in this case, the problem is solved with the help of stencils. You can draw them yourself, or you can find an image you like, print it on thick paper, cut out the design with a sharp knife, leaving jumpers in places. Now the stencil is ready.
The disadvantage of a paper stencil is that it doesn’t last long. If you need a “long-lasting” one, you need to transfer it to a transparent thick film. The technology for cutting out stencils for door decoration is shown in more detail in the video.
Read also: How to make semi-sweet wine from dry wine?
The drawing can be anything. Both geometric and floral, stylized images of animals, birds, and cartoon characters are popular.
Here are some options for small stencils
But they can also cover the entire area of the door leaf. It all depends on the style of the room and your desires.
Using the same technique, you can decorate doors with glass. Many older doors have a regular glass insert. In order not to spend money on patterned ones, you can apply the pattern yourself.
Stencil on door glass
Door with overlay panels
This master class differs from the previous one in that here we will not only attach the strips, but also fill the inside of the doors with overlay panels.
Necessary materials:
- Plastic panels (we make these here, but wooden panels can also be used)
- Roulette
- Pencil
- Building level
- Construction adhesive
- Latex paint
- Screwdriver
- Masking tape
- Hand saw
- Screws
- Safety glasses and earmuffs
- Putty for plastic
- Putty knife
- Sander (or sandpaper)
Step-by-step instruction:
Step 1: Correct the door defects. If the door is very old and has some defects that cannot be hidden by painting (for example, the top coating has chipped off in places, or there are deep scratches), then initially you need to remove them and make the surface smooth.
- To do this, apply wood putty and let it dry,
- then smooth the surface with a grinding machine or sandpaper .
Step 2: Outlining the location of the planks
We will do the marking here the same as in the previous case, that is, we will retreat 5" (about 13 cm) everywhere except the bottom of the door, where we leave 6" (about 15 cm).
TIP: If you don't have a long ruler, you can draw lines using a building level.
Step 3: Attach the panel
Apply construction adhesive to the back of the plastic panels.
Place the panels on the door and check that they are positioned correctly using a level. The sides of the panels should be clearly parallel to the edges of the door.
Press down on the panel until it presses firmly against the door and sticks securely. Secure this entire structure around the perimeter with small screws using a screwdriver.
Step 4: Attach the planks
Again, you can either cut the planks to size at a shop, or do it yourself using a saw and miter box. The strips should surround the panels around the perimeter, fitting tightly to them.
Attach one strip first, the top one. To do this, use thin screws and a screwdriver .- Now we move on to attaching the side strips. It is important here that the planks meet tightly and evenly in the corners; to do this, before attaching them with screws, glue them to the door with masking tape and make sure that everything is correct.
- After this, secure with screws and remove the masking tape.
- Do the same with all the remaining planks.
Note: the planks can initially be glued with construction adhesive and then secured with screws.
This is what should happen at this stage:
Step 5: Paint the door. Now all that remains is to paint the door and leave it until completely dry.
Now compare the door before and after repair:
The applied relief makes the door more stylish and affects the appearance of the entire room as a whole:
Don't be afraid to change up old items and give them a different look. Give them the opportunity to serve you again, but in a new guise!
Any, even the most expensive and high-quality interior doors can become unusable. The door leaf may fade, crack, or simply become boring. In any case, now it won’t be too difficult to replace the old door with a completely new one. But this may not always be truly appropriate or necessary. There are cases when replacing them will not work or will be problematic, for example, the door has non-standard dimensions or you do not have the necessary funds to purchase a new door. One way or another, there is always an alternative option, because there are many ways to update any door with your own hands.
There are many restoration methods, but regardless of the choice, you first need to prepare the tools that will be needed during the work process.
You must have with you:
- Construction hair dryer;
- Plane;
- Spatulas;
- Grinder machine;
- Sandpaper.
Replacing a door with an arch
A modern design solution is to decorate the interior of a room using an arch. This option is used in various variations and forms. In each individual case, the arched design adds decorative elements to the interior of the room. To decorate arches, fabric, plastic, decorative stone and other materials of various colors and shapes are used.
Arched design
If you are thoroughly tired of the doors between rooms, you should get rid of them and redesign the room. In this case, use an arched design. With its help, you can divide the room into separate parts, giving it uniqueness and originality. The decor of the arch depends only on your preferences.
Round arch
Finishing
When considering options for closet doors, you should also think about how to finish the door panel. To do this, you can use film or wallpaper, fabric upholstery or paints and varnishes. Sometimes the canvases are decorated with mosaics or stained glass, tinted glass or mirror. Home craftsmen often use decoupage techniques and the method of aging wood.
The most affordable and simplest finishing method is painting. To do this, you can use varnish or stain, which perfectly emphasize the structure of the wood. Self-adhesive film looks great in bathrooms, which also allows you to protect the canvas from moisture.
DIY installation
It is not difficult to equip a storage room in an apartment. The main thing is to clearly define for yourself its functionality, purpose, and completeness. Then hang the selected door structure of the required size. Depending on the width of the opening, it may have one or more sashes. The main thing is that there is enough space to open it.
First of all, prepare the niche or opening itself for installing the opening mechanism: clean, level the surfaces using putty or assembling a frame from a profile and plasterboard. If a metal or wooden box is provided, then it is installed.
The installation of the door leaf itself directly depends on the opening method:
- Hinge locations are marked on swing structures. A recess is made for the fittings and screwed first to the end of the door, and then to the frame.
- Sliding or folding mechanisms provide for the installation of a guide profile on the ceiling and floor (or only on the ceiling). Then the rollers are secured and the canvas is put in place.
- Blinds and roller blinds are hung on the cornice or directly to the ceiling (the top of the opening).
At all stages, it is recommended to carefully monitor the horizontal arrangement of all components, the mirror image of the two combined hinge elements, and maintaining the distances relative to each other of the sliding door guides.
Components
A sliding door is a whole system that consists of several elements. The leaf is held in place by the upper guide, thanks to which the door does not fall out. There are also guides at the bottom, they indicate the direction of the canvas and have grooves. A handle profile is located vertically, which can be symmetrical or asymmetrical. There is a roller with a bearing at the bottom, which bears the load. There is also a roller on top; it is necessary for installing the door into the guide. The design has a seal that is located at the end and is necessary to soften the impact.
Preparing the doorway
Before you start installing the door to the pantry, you must first prepare the base:
- dismantle the old door;
- remove the trim and door frame;
- level the doorway by plastering and painting.
Article on the topic: Photo wallpaper for the kitchen: how to choose, what sizes are available, drawings, landscapes
Preparatory work is carried out taking into account the material of the walls, location, but the main requirement is that the wall with the future opening allows the installation of sliding doors - otherwise you will have to look for another option.
How to choose material
Before you make a door to the pantry, you will need to select the material. Wood goes well with furniture and parquet, it is durable and of high quality, in addition, it is easy to process and provides sound insulation. If you choose wood, it is important to ensure that the frame and trim are also made of the same material. But it has disadvantages, such as vulnerability to water, fire hazard and high cost.
Among the budget solutions, lining should be highlighted, while the profile can be made of any material. An alternative is synthetic polycarbonate. It is suitable for use in wet conditions, is resistant to temperature changes and can retain heat if supplemented with insulation.
Additional components
In order to make a door to a pantry, the most important elements are profile guides, which include the following elements:
- track;
- rollers;
- stopper;
- limiters.
Basic components of a sliding door.
The complete set includes a door leaf, and for the spacer you will need a wooden block with a cross-section of 40x50 mm.
Installation must begin by attaching the beam, which is installed horizontally, maintaining a distance of 6 cm in relation to the edge of the doorway. This design will serve as a spacer.
Next, guide tracks are attached to this beam using self-tapping screws.
The stops are attached to the floor surface horizontally under the guide element, and the stoppers are installed to the wall at the top. A strip is attached to the top end of the sliding door.
To ensure free movement of door panels along the guides, rollers are installed in the track and the panels are carefully hung by inserting the strip into the grooves of the rollers. The guide elements on the end sides, as well as above the door, are closed using platbands. To make a door to the pantry, you need to cut a door blank from a single sheet of chipboard (the thickness of which is 16 mm). After sawing, the edges are glued with veneer tape.
After installation, it is necessary to adjust the door movement and install fittings, and if necessary, install a lock.
In a small room where the pantry is located, you can install mirrored sliding doors, which will not only look original, but also visually increase the space.
Return to contents
Expert advice
You can make a door to the pantry using the principle of a curtain wall. This design is functional and easy to implement. The kit will consist of a door leaf, fasteners, trim, frame and lock. The frame can be a frame that will provide rigidity and adjust the dimensions. Stained glass or plastic can be used to cover the structure; wooden panels are also suitable. If the pantry opens onto the street or into a cold room, its structure can be further insulated by placing an insulating layer under the cladding.
Doors for pantry in apartment
A pantry is a room where you can store wardrobe items, food, professional equipment and other useful things that the owners need from time to time.
This room must be properly decorated so that this important part of the apartment or house becomes a harmonious continuation of the overall interior. To do this, you should properly equip the interior of the room and take the choice of a suitable closet door as seriously as possible. There are standard and non-standard options for door designs: it is worth considering them in more detail.
A door leading to a storage room or hiding a mezzanine plays two important roles: safely dividing a room into closed areas and adding an additional decorative element to the room's design. When decorating such a room, it is necessary to take into account the style of the apartment. Harmonious design presupposes that all components match each other, this also applies to doors.
The following are the most popular options for pantry doors in an apartment:
- classic style: involves the use of a wooden door leaf. Imitation of wood is possible;
- modern style: involves the use of plastic, glass, metal products or combinations thereof;
- you can install small grates or drill holes at the bottom of the canvas. This will help prevent dampness, mold and provide ventilation;
- in ethnic style, aged wooden surfaces, metal, natural stone cladding, forging, leather or its imitation are welcome.
There is a wide range of closet doors available in the market these days.
The designs of doors for pantry are very diverse:
- sliding doors or compartments: a suitable option for a small apartment. The canvas moves using rollers - along tracks. Stoppers are installed at their edges. The main advantage of such structures is the absence of clutter with door panels;
- vertical, horizontal, roller, protective blinds are lamellas - thin slats, plates of various sizes. The lightness of the blinds ensures normal air circulation. They protect the room from exposure to bright sunlight;
- swing doors: the most common option. This design consists of a fixed door frame and a movable door leaf;
The door leading to the pantry plays two important roles: safely dividing the room into closed zones and introducing an additional decorative element into the room design
- You can install two leaves to create double doors. The doors can open in one direction or in both directions. The advantages of these canvases are an increase in space and the ability to quickly ventilate the room.
- folding doors or “accordion”: a very practical option. These are panels that are connected to each other with hinges. Such doors have a number of advantages: saving space, the ability to use them in openings of any size, maintaining the integrity of the floor covering, a large number of colors;
- sliding doors: having a sliding mechanism, they move in the same plane with the wall. The advantage of such structures is obvious: they save space;
- roller blinds: they are a freely hanging canvas, which is fixed on a shaft in the upper part. A chain or spring mechanism ensures the folding of the fabric;
- doors for special purposes: if you plan to store valuables in a storage room, then it is necessary to install a fire-resistant and fire-resistant door, the important advantage of which will be resistance to high temperatures;
- hidden door: this solution can be implemented by disguising the door under the front of a kitchen cabinet, wall unit, wall, shelving unit, mirror or picture. The easiest and cheapest way to disguise is to cover the door with the same wallpaper as on the walls.
Among the advantages that these systems have, we can highlight the main advantages: lack of dust, ease of use, maintaining attractiveness throughout the entire period of operation.
Additional information about material selection
When considering pantry door designs, you should definitely think about what material to choose. If it is solid wood, it will allow air to pass through well and provide ventilation. The material looks beautiful, is environmentally friendly and will fit into almost any interior. It has only one drawback, expressed in high cost. If you prefer wood but are on a budget, you can use raw boards to create a barn-style door.
A narrow door to the pantry can be made of: laminated chipboard, chipboard, MDF. These materials are affordable, look good and perform well in use. Materials can be made to imitate natural solutions, so the door can be made to suit any interior style.
Sometimes the canvases are even made of iron, this helps protect against unauthorized entry into the pantry where valuables can be stored. But iron does not allow air to pass through, so it is important to take care of the ventilation system by adding it to one of the walls.
Installation of a compartment door
To install the door leaf, you need to attach the upper and lower guide strips along which the wheels will ride.
The top rail is fixed to the edge of the pantry doorway. The bottom strip is fixed with an indentation of 18 mm (for double-leaf doors), 9 mm for one-sided doors.
The process of installing a compartment door in a wardrobe
If you do not want to screw the bottom strip with screws to avoid damage to the floor covering, then you can use double-sided tape. But, in this case, a stopper positioner should be used. Watch the video for a detailed process of installing compartment doors in a closet.
Door assembly
When creating a dressing room with your own hands, you also make a sliding door. This requires a plywood sheet, laminated chipboard, glass, wood.
Diagram with dimensions for assembling a compartment door to a wardrobe
Based on the measurements taken from the doorway, you need to cut out a sheet of plywood. Fix one by one to this canvas:
- rollers - top and bottom;
- profile - top and bottom;
- frames - top and bottom.
With ready-made doors, no assembly is required; they are fully assembled and complete.
Installation of the canvas
After complete assembly, the door is installed in the doorway. First you need to insert the upper wheels into the grooves. After this, the wheels are clamped inward at the bottom, and then the door is inserted into the guide.
Adjustment
Using a regular screwdriver or hexagon, the screw is turned at the bottom. This way the desired height of the canvas is set. After installing the compartment doors, they open easily, lock freely and close quietly.
Determining web parameters
We take measurements of the opening to the pantry and, based on them, select sliding sashes. I would like to draw your attention to the fact that you need to decide on the parameters only after the floor covering has been installed. Otherwise, there is a risk that the doors will not fit tightly at the top, and unwanted gaps will appear.
Since I already had laminate flooring in my room, I boldly started taking measurements. Please note that if you also regret installing sliding doors with guides, then the door itself should be smaller than the opening by the height of the installed guides together. That is, measure the height of the lower and upper mechanism, add the value together and get the result by which the door should be less than the height of the opening.
Source o-dveryah.ru
